Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop T-Bucket Windshields At Speedway Motors

Everything a roadster enthusiast needs for T-Bucket windshield installation is at Speedway Motors. Find everything from windshield frames, windshield wing nuts, glass setting channels, wind wing kits to brackets, and windshield rubber. To finish the installation, make sure you get vintage T-Bucket windshield support rods and posts.

"T-Bucket, Windshields and Glass" Page 1 of 5

  • 1909-12 Ford Model T Brass Glass Setting Channel for Open Cars
    1909-12 Ford Model T Brass Glass Setting Channel for Open Cars
    SKU-55509900
    x
                Fits Ford Model T Roadster and Touring open top applications. Designed to use 3/16" thick safety glass or Lexan. Channel holds glass in the original frames.
            
  • 1923-25 Model T Windshield Frame, Chrome
    1923-25 Model T Windshield Frame, Chrome
    SKU-55523002
    x
                

    Mr. Roadster '23-'25 Model T steel windshield frames are reproductions using the stock dimensions: bottom 38-1/2 " wide, 10-1/8" tall, top 37" wide, 10-1/4" tall. Includes slugs and glass caps. Channel kit is sold separately. No glass or windshield rubber is included with our windshield frames.

    Builder's Tip: Speedway '23-'25 T bodies use a 39-5/8" wide windshield frame when using short posts. If using 3/16" glass or lexan, use with brass setting channel.  If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • 1923-25 Model T Windshield Frame, Plain
    1923-25 Model T Windshield Frame, Plain
    SKU-55523001
    x
                

    Mr. Roadster '23-'25 Model T steel windshield frames are reproductions using the stock dimensions: bottom 38-1/2 " wide, 10-1/8" tall, top 37" wide, 10-1/4" tall. Includes slugs and glass caps. Channel kit is sold separately. No glass or windshield rubber is included with our windshield frames.

    Builder's Tip: Speedway '23-'25 T bodies use a 39-5/8" wide windshield frame when using short posts. If using 3/16" glass or lexan, use with brass setting channel.  If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • 1915-22 Model T Roadster Windshield Frame, Plain
    1915-22 Model T Roadster Windshield Frame, Plain
    SKU-55515001
    x
                

    Mr. Roadster 1915-22 Model T steel round top windshields are exact reproductions using the stock dimensions: 39-1/8 " wide, 10" tall top and 12-1/8" tall bottom.  Channel kit sold separately. No glass or windshield rubber is included with these windshield frames.

    Builder's Tip: If using 3/16" glass or lexan, use with brass setting channel. If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • Lexan Wind Wings with Holes
    $35.99
    Lexan Wind Wings with Holes
    SKU-91656939
    x
                

    Replacement Lexan wind wings for your universal wind wing kits. 

    • These are 16" tall by 5 7/8" wide
    • Thickness: 3/16"
    • Center to center of the two sets of mounting holes on the wind wings is 6 ¾"
    • One set of holes is 3" from the end of the wing and the other set is 6 ¼"
    • Total of 16" in length or height of the wind wing


     

  • Model T Glass Cap, Stainless Steel
    Model T Glass Cap, Stainless Steel
    SKU-91656182
    x
                

    Stock style glass caps fit all Model T windshields.

    Sold each.

    Model T Glass Cap Illustration (GIF)

  • Model T Glass Cap, Brass
    $3.99
    Model T Glass Cap, Brass
    SKU-91656183
    x
                

    Stock style glass caps fit all Model T windshields.

    Sold each.

    Model T Glass Cap Illustration (GIF)

  • Lexan Wind Wings
    From: $29.99
    Product Rating: 4.67 Stars
    Lexan Wind Wings
    SKU-91656947
    x
                  16" x 6". Choose from two colors of wind wing, smoke or clear. Wing wings sold in pairs.       
            
  • 1926-27 Model T Roadster Windshield Frame, Bottom Only, Plain
    1926-27 Model T Roadster Windshield Frame, Bottom Only, Plain
    SKU-55526031
    x
                

    These beautiful replacement '26-'27 Model T windshield frames are available as a complete frame kit or just the bottom section to fit a specific application. These are 7/8" O.D. and the glass channel is 5/16" wide and 1/4" deep. The lower part of the frame next to the body accepts our T seal number 555-92600 and the slot for the seal is 1/8" wide with provision to accept the "T" style seal. 

    No glass or windshield rubber included with our frames. The slugs that are included with this windshield frame must be positioned, drilled and tapped by the installer.

    • 35" wide at bottom of frame
    • 38-1/2" overall width
    • 9-3/4" tall

    NOTE: You will also need (4) studs, wing nuts, and swivels (all sold separately) along with this frame.

  • 1913-14 Ford Model T Brass Glass Setting Channel for Open Cars
    1913-14 Ford Model T Brass Glass Setting Channel for Open Cars
    SKU-55513900
    x
                Fits Ford Model T Roadster and Touring open top applications. Designed to use 3/16" thick safety glass or Lexan. Channel holds glass in the original frames.
            
  • 1932-36 Ford Windshield Swivel for Square Tubing Frame, Chrome
    1932-36 Ford Windshield Swivel for Square Tubing Frame, Chrome
    SKU-91133106
    x
                

    These windshield frame cone swivels will work perfect for your 1932-1936 Fords with square tubing windshield frames.

    • 1932-36
    • Ford Square Tubing Windshield Frames
    • Mount these at pivot point of stanchion
    • Available in die cast chrome
    • Sold each

    Windshield Mount Guide (GIF)

  • 1909-22 Ford Model T Roadster Windshield Hinges, Functional, Brass
    1909-22 Ford Model T Roadster Windshield Hinges, Functional, Brass
    SKU-91113101
    x
                

    Windshield frame hinges for 1909-22 Model T Ford Roadster windshields.

    NOTE: Functional hinges have a mounting stud for windshield support rods. Functional hinges only pivot/function when the pivot assembly is forward or to the front of the windshield frame. These become a non-functional 2-piece design when the pivot assembly is installed to the rear or behind the windshield frame.

    911-13101 Instructions (PDF)

  • One-Piece Round Top Model T Windshield Frame, 39 Inches Wide
    One-Piece Round Top Model T Windshield Frame, 39 Inches Wide
    SKU-55522312
    x
                Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Fits most 'T' bucket bodies. No hinges or rubber divider required. Easy installation. All parts are triple chrome plated. 20" tall. Designed for short style posts (916-56231 or 916-56232). 
    • Glass and windshield rubber not included 
    • If using 3/16" glass or lexan, use with brass setting channel. 
    • If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

    Note: Speedway's 1923-25 Model T bodies use a 39-5/8" wide windshield frame when using short posts.

  • 1926-27 Model T Roadster Windshield Frame, Plain
    1926-27 Model T Roadster Windshield Frame, Plain
    SKU-55526001
    x
                

    These beautiful replacement '26-'27 Model T windshield frames are available as a complete frame kit or just the bottom section to fit a specific application. These are 7/8" O.D. and the glass channel is 5/16" wide and 1/4" deep. The lower part of the frame next to the body accepts our T seal number 555-92600 and the slot for the seal is 1/8" wide with provision to accept the "T" style seal. 

    No glass or windshield rubber included with our frames. The slugs that are included with this windshield frame must be positioned, drilled and tapped by the installer.

    NOTE: You will also need (4) studs, wing nuts, and swivels (all sold separately) along with this frame.

  • 1915-25 Model T Short Style Windshield Posts, Plain
    1915-25 Model T Short Style Windshield Posts, Plain
    SKU-91656232
    x
                

    Short style Model T posts are brass castings with mounting bosses on the back side to permit a smooth, clean installation. Fits 1915-25 Ford Model T roadster bodies.

    916-56232 Instructions (PDF)

  • Threaded Windshield Stud, 1928-36 Ford, 3/8 In X 3/8 In NF X 2 In
    Threaded Windshield Stud, 1928-36 Ford, 3/8 In X 3/8 In NF X 2 In
    SKU-91123102
    x
                

    These threaded windshield studs feature a stop and include one stud and one cone nut. They are zinc plated for longevity. Fits 1928-31 Model A and 1932-36 Ford.

    • Steel material
    • (1) stud, (1) cone nut
    • Sold each

    Not included in our windshield kits.

  • 1909-22 Ford Model T Roadster Windshield Hinges, Non-Functional, Plain
    1909-22 Ford Model T Roadster Windshield Hinges, Non-Functional, Plain
    SKU-91156400
    x
                

    Windshield frame hinges for 1909-22 Model T Ford Roadster windshields.

    NOTE: Functional hinges have a mounting stud for windshield support rods. Functional hinges only pivot/function when the pivot assembly is forward or to the front of the windshield frame. These become a non-functional 2-piece design when the pivot assembly is installed to the rear or behind the windshield frame.

    911-56400 Instructions (PDF)

  • Square Top T Windshield Frame, 40-1/2 Inches Wide
    Square Top T Windshield Frame, 40-1/2 Inches Wide
    SKU-55522032
    x
                

    Mr. Roadsters square top 'T' windshield frames fit most fiberglass T-buckets. Triple chrome plated steel. Kit includes frame (approximately 20" tall), non-functional hinges and hardware. Designed for short style posts.

    No glass or windshield rubber is included with our windshield frames.

    Note: Speedway 1923-25 Model T Bodies use a 39-5/8" wide windshield frame when using short posts.

    Builder's Tip: If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • Two-Piece Round Top Model T Roadster Windshield Frame, 39 Inch Wide
    Two-Piece Round Top Model T Roadster Windshield Frame, 39 Inch Wide
    SKU-55522112
    x
                

    Mr. Roadsters 2-piece round top windshield frames fit most fiberglass T-buckets. Triple chrome plated. Kit includes frame (approximately 20" tall) and hardware. Designed for short style windshield posts.

    No glass or windshield rubber is included with our windshield frames. Note: Speedway's 1923-25 T bodies use a 39-5/8" wide windshield frame when using short posts.

    Builder's Tip: If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • 1926-27 Model T Roadster Windshield Frame, Chrome
    1926-27 Model T Roadster Windshield Frame, Chrome
    SKU-55526002
    x
                

    These beautiful replacement '26-'27 Model T windshield frames are available as a complete frame kit or just the bottom section to fit a specific application. These are 7/8" O.D. and the glass channel is 5/16" wide and 1/4" deep. The lower part of the frame next to the body accepts our T seal number 555-92600 and the slot for the seal is 1/8" wide with provision to accept the "T" style seal. 

    No glass or windshield rubber included with our frames. The slugs that are included with this windshield frame must be positioned, drilled and tapped by the installer.

    NOTE: You will also need (4) studs, wing nuts, and swivels (all sold separately) along with this frame.

  • Square Top T Windshield Frame, 39-5/8 Inches Wide
    Square Top T Windshield Frame, 39-5/8 Inches Wide
    SKU-55522022
    x
                

    Mr. Roadsters square top 'T' windshield frames fit most fiberglass T-buckets. Triple chrome plated steel. Kit includes frame (approximately 20" tall), non-functional hinges and hardware. Designed for short style posts.

    No glass or windshield rubber is included with our windshield frames.

    Note: Speedway 1923-25 Model T Bodies use a 39-5/8" wide windshield frame when using short posts.

    Builder's Tip: If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • 1909-1912 Model T Roadster Brass Windshield Frame, Torpedo
    1909-1912 Model T Roadster Brass Windshield Frame, Torpedo
    SKU-55509200
    x
                

    Mr. Roadster '09-'12 Model T windshield frames are constructed from solid brass, then fully polished. Features a brass channel. No glass or windshield rubber is included with these windshield frames. 

    Builder's Tip: If using 3/16" glass or lexan, use with a brass setting channel. If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use a brass setting channel.

  • 1926-1927 Speedster Vee Windshield Frames, Polished Brass
    1926-1927 Speedster Vee Windshield Frames, Polished Brass
    SKU-55526500
    x
                

    Unique, classic-stye 3-piece design made of cast brass. Fits 1926-1927 Model T roadsters for an original look. Also for use on the Speedway Track-T Roadster kit. Windshield glass (not included) easily siliconed into the milled grooves. Glass template included.

  • 1909-1912 Model T Roadster Brass Windshield Frame, Speedster
    1909-1912 Model T Roadster Brass Windshield Frame, Speedster
    SKU-55509100
    x
                

    Mr. Roadster '09-'12 Model T windshield frames are constructed from solid brass, then fully polished. Features a brass channel. No glass or windshield rubber is included with these windshield frames. 

    Builder's Tip: If using 3/16" glass or lexan, use with a brass setting channel. If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use a brass setting channel.

  • Threaded Windshield Studs
    $3.99
    Threaded Windshield Studs
    SKU-91656181
    x
                

    Studs are zinc plated for longevity. Not included in our windshield kits. Sold each.

     Windshield Mount Guide

  • 1915-31 Ford Windshield Swivel, Brass
    1915-31 Ford Windshield Swivel, Brass
    SKU-91113111
    x
                

    These windshield swivels are for 1915-1931 Fords with round tubing windshield frames.

    Ford Windshield Swivel

    • Sold each
    • Brass finish

    Windshield Mount Guide (GIF)

  • 1926-1927 Model T 4 Inch Chopped Roadster Windshield Frame, Plain
    1926-1927 Model T 4 Inch Chopped Roadster Windshield Frame, Plain
    SKU-55526041
    x
                

    Mr. Roadster '26-'27 Model T windshield is a one-piece design like a Model A roadster. "Chopped" to a height of 16" tall.

    These are 7/8" O.D. and the glass channel is 5/16" wide and 1/4" deep. The lower part of the frame next to the body accepts our T seal number 555-92600 and the slot for the seal is 1/8" wide with provision to accept the "T" style seal and are 16" tall.

    Note: No glass or windshield rubber included with our windshield frames.

  • Universal Wind Wing Kit with Brackets
    From: $79.99
    Product Rating: 5.00 Stars
    Universal Wind Wing Kit with Brackets
    SKU-91656941
    x
                This universal wind wing kit is chrome plated and features a fully adjustable mounting style. Universal design works well on Roadsters and closed cars (mounts to flat frame or body only). Available in clear or smoke tint.
            
  • Tribute T Windshield Frame
    $499.99
    Tribute T Windshield Frame
    SKU-55522018
    x
                
    • For use with short posts - angled or straight
    • Fits Speedway 23 - T bodies
    • 39-5/8" Wide
  • 1926-1927 Model T 4 Inch Chopped Roadster Windshield Frame, Chrome
    1926-1927 Model T 4 Inch Chopped Roadster Windshield Frame, Chrome
    SKU-55526042
    x
                

    Mr. Roadster '26-'27 Model T windshield is a one-piece design like a Model A roadster. "Chopped" to a height of 16" tall. Available in plain or chrome plated steel.

    These are 7/8" O.D. and the glass channel is 5/16" wide and 1/4" deep. The lower part of the frame next to the body accepts our T seal number 555-92600 and the slot for the seal is 1/8" wide with provision to accept the "T" style seal and are 16" tall.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1926-27 T Smoothie Windshield Posts
    From: $99.99
    Product Rating: 5.00 Stars
    1926-27 T Smoothie Windshield Posts
    SKU-71510623
    x
                
    • Cast aluminum with inset windshield channel
    • Designed to fit '26-'27 T roadsters
    • Available in plain or polished finish
  • 1926-27 Model T Roadster Windshield Frame, Bottom Only, Chrome
    1926-27 Model T Roadster Windshield Frame, Bottom Only, Chrome
    SKU-55526032
    x
                

    These beautiful replacement '26-'27 Model T windshield frames are available as a complete frame kit or just the bottom section to fit a specific application. These are 7/8" O.D. and the glass channel is 5/16" wide and 1/4" deep. The lower part of the frame next to the body accepts our T seal number 555-92600 and the slot for the seal is 1/8" wide with provision to accept the "T" style seal. 

    No glass or windshield rubber included with our frames. The slugs that are included with this windshield frame must be positioned, drilled and tapped by the installer.

    NOTE: You will also need (4) studs, wing nuts, and swivels (all sold separately) along with this frame.

  • 1926-1927 Model T Windshield Posts, 4 Inch Chopped, Chrome
    1926-1927 Model T Windshield Posts, 4 Inch Chopped, Chrome
    SKU-91656271
    x
                These 1926-27 Ford Model T 4" chopped posts are designed for use with Mr. Roadster® chopped windshield frame. One-piece design.

    From the bottom most tip to the center of the pivot hole is 20-1/4".
  • 1915-22 Model T Roadster Windshield Frame, Chrome
    1915-22 Model T Roadster Windshield Frame, Chrome
    SKU-55515002
    x
                

    Mr. Roadster 1915-22 Model T steel round top windshields are exact reproductions using the stock dimensions: 39-1/8 " wide, 10" tall top and 12-1/8" tall bottom.  Channel kit sold separately. No glass or windshield rubber is included with these windshield frames.

    Builder's Tip: If using 3/16" glass or lexan, use with brass setting channel. If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • One-Piece Round Top Model T Windshield Angled Posts, 14 x 39-5/8 Inch
    One-Piece Round Top Model T Windshield Angled Posts, 14 x 39-5/8 Inch
    SKU-55522422
    x
                Mr. Roadster is the nation's largest builder and supplier of superior  windshield frames! Fits most 'T' bucket bodies. No hinges or rubber  divider required. Easy installation. All parts are triple chrome plated. 14" tall. Designed for short style vertical (916-56231) or 30° angled posts (715-1111).
    • Glass and windshield rubber not included 
    • If using 3/16" glass or lexan, use with brass setting channel. 
    • If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

    Note: Speedway's 1923-25 Model T bodies use a 39-5/8" wide windshield frame when using short posts.

  • 1926-1927 Tall Model T Windshield Posts, Stock Height, Chrome
    1926-1927 Tall Model T Windshield Posts, Stock Height, Chrome
    SKU-91113203
    x
                

    These reproduction chrome plated posts are a one piece original style tall design.

    1926-27 Model T Windshield Posts

    • Stock Model T height
    • Chrome plated finish
    • Requires drilling to mount

    T-Bucket Windshield Frame Diagram/Tech Tip (Link)

     

Goto Previous PagePrevious Page
1 2 3 4 5