Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 4

Products

Water Pumps and Accessories

Shop T-Bucket Cooling At Speedway Motors

Speedway Motors wants to make sure your T-Bucket stays as cool as it looks! Our T-Bucket aluminum radiators and short water pumps will keep the temperature down while you cruise the town. Top it off with a polished radiator cap, dog bone cap, winged radiator cap, cooling fan, and fan shroud. Give your T-Bucket a vintage look with a Model T motor meter and Model T filler neck. Speedway also offers all the radiator hoses, pulley spacers, and support brackets needed to complete the job.

Featured Products
  • Modular Electric Water Pump
    $129.99
    $149.99
    Modular Electric Water Pump
    (Part #911880)
    x
                

    Our newest high volume electric water pump has been machined from billet aluminum and the fit & finish is excellent. This pump is durable and light weight, but is still able to cycle up to 35 gallons of coolant per minute! Electric water pumps reduce impeller drag experienced with mechanical water pumps at high rpms and are recommended for high performance racing applications.

    • Includes all required seals, fittings and hardware (when adapters and pump are combined)
    • Precision machined billet aluminum housing
    • Light weight
    • 35 gpm rating
    • Eliminates impeller drag found in mechanical water pumps
    • Black anodized finish on motor, all other parts polished

    Note: For complete assembly, simply select the Small Block Chevy adapters(911885) or the Big Block Chevy, Small Block Ford or the Big Block Ford adapters listed below that your application requires and the pump body.

  • Small Block Chevy Performance Aluminum Water Pump, Short
    Small Block Chevy Performance Aluminum Water Pump, Short
    (Part #91015580)
    x
                Each pump is manufactured from T6 aluminum and features an impeller with curved vanes for maximum flow, pressure and equal distribution to both sides of the block. It also features a unique seal assembly for leak proof operation. 
    • 3/4" shaft with 5/8" fan pilot snout
    • 1/2" NPT hole on passenger side (for heater hose) and on top (for bypass hose)
    • Stamped steel rear plate
    • Extra thick fan hub
    • 3/4" ultra duty bearings
    • Adjustable cam stop
    • State of the art aluminum castings
    • Equal flow to both cylinder banks
    • Precision impeller
    • Higher flow rate and pressure rate
    • Weighs 6 lbs.
    • Does not have a set screw retaining the fan hub

    NOTE: This pump is designed for street use and is not to be run on a motor which exceeds 5,500 RPM. 

    910-15580 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • Zips Small Block Chevy Water Pump Riser
    Zips Small Block Chevy Water Pump Riser
    (Part #9102306)
    x
                
    • Water pump riser solves the common problem of the fan being mounted too low on the radiator to be effective
    • Raises the pump and mechanical fan 5" higher in the engine compartment
    • Provides mounting surfaces for an A/C compressor and alternator
    • Riser housing comes with brackets and hardware
    • Water pump not included (use Chevy 250 L6 water pump)

    910-2306 Instructions (PDF)

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump.

  • Snow White Small Block Ford Shorty Water Pump, 2-Groove Pulley
    Snow White Small Block Ford Shorty Water Pump, 2-Groove Pulley
    (Part #9102308)
    x
                
    • Positions lower hose (inlet) on the passenger side (1-3/4" diameter)
    • Allows use of a Chevy style radiator
    • 2" shorter than stock Ford pump 
    • Weighs 13.75 lbs. less than stock cast iron pump set-up
    • Fits 1963-1988 Ford 302 and 351 (Cleveland or Windsor)
    • Includes standard aluminum water pump
    • Aluminum adapter included
    • Machined aluminum 2-groove crank pulley and 1-groove water pump pulley
  • 1955-68 Small Block Chevy Single Groove Upper Pulley, Short Water Pump
    1955-68 Small Block Chevy Single Groove Upper Pulley, Short Water Pump
    (Part #91015421)
    x
                

    These upper pulleys for 1955-68 short water pumps feature a single groove with a beautiful chrome finish.  They will work with 283-350 V8 small block Chevy engines.  Sitting flat on the workbench, the pulley is 2-3/4" high in the center at the water pump.

    • Upper pulley
    • 1955-68 283-350 V8 small block Chevy engine
    • Short water pumps
    • Single groove  
    • 7-1/8" Diameter
    • Chrome plated finish

    Note:  These upper pulleys will not work with our lower pulley (91015424).  Use our lower pulley (91015422) to correspond for proper alignment with these upper pulleys.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • Modular Electric Water Pump Adapters for Big Block Chevy
    Modular Electric Water Pump Adapters for Big Block Chevy
    (Part #911886)
    x
                

    Check out these adapters for our newest high volume electric water pump for Big Block Chevys. These adapters have been machined from billet aluminum and the fit & finish is excellent.

    • Aluminum Construction
    • Designed to work with our modular electric water pump housing (911880)
    • Polished Finish
    • Sold Individually
  • 1955-68 Chevy Short Water Pump Nose Cover
    1955-68 Chevy Short Water Pump Nose Cover
    (Part #91015431)
    x
                

    Billet aluminum nose cover for 1955-68 small block Chevy short water pumps.

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • King Chrome Small Block Chevy Short Water Pump Bolt Kit
    King Chrome Small Block Chevy Short Water Pump Bolt Kit
    (Part #91303804)
    x
                A bolt kit for a S/B Chevy short water pump. All feature that unique King Chrome premium chrome plating. Fits Small Block Chevy (SBC).
            

Filter

"T-Bucket, Water Pumps and Accessories" Page 1 of 4

Page 1 of 4

  • Speedway Adjustable Small Block Chevy Aluminum Short Water Pump
    Speedway Adjustable Small Block Chevy Aluminum Short Water Pump
    (Part #91015582)
    x
                

    Speedway's adjustable water pump is tried, tested and true. It has great flow, superior quality and standard features that are typically only available on water pumps costing twice as much. State-of-the-art aluminum casting and a precision impeller provide equal flow to both cylinder banks. If you're using a cog belt on your race car, this is the pump you want since it's adjustable. The 1/2" mount holes in this pump are larger than normal, allowing it to be moved up or down slightly to help with belt tension.

    • Adjustable mounting holes
    • High flow and pressure rates
    • Adjustable cam stop
    • Extra-thick fan hub
    • 3/4" inch heavy duty bearing
    • Pressed-fit and set-screw-retained fan hub
    • Large-diameter shaft and reinforced housing make it ideal for oval-track applications

    910-15582 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump

  • Plain Aluminum 348/409 Big Block Chevy Water Pump, Mechanical, Short
    Plain Aluminum 348/409 Big Block Chevy Water Pump, Mechanical, Short
    (Part #91015563)
    x
                

    If you are spending the money to build a 348 or 409 Chevy engine you had just as well put a high performance aluminum water pump on it. Threaded on top for heater hose fitting. Barbed hose fitting included. Comes with gaskets.

    • Threaded on top for heater hose fitting
    • Barbed hose fitting included
    • Comes with gaskets
    • Plain aluminum finish
  • Aluminum Upper Pulley Screw Kit
    Aluminum Upper Pulley Screw Kit
    (Part #91015440)
    x
                Set of four tapered seat bolts to properly secure upper aluminum water pump pulleys. Flat head cap. Black oxide finish. 
            
  • Modular Electric Water Pump Adapters for Big Block Ford
    Modular Electric Water Pump Adapters for Big Block Ford
    (Part #911889)
    x
                
    Check out our adapters for our newest Big Block Ford high volume electric water pump. These engine water pump adapters are machined from billet aluminum and the fit & finish is excellent. 
    • Aluminum
    • Polished
    • Sold as a Pair
    • Designed to work with our modular electric water pump housing (911880)
  • Black Upper Double Groove Water Pump Pulley, Chevy V8
    Black Upper Double Groove Water Pump Pulley, Chevy V8
    (Part #91038813)
    x
                Finding stock brackets and v-belt pulleys in  serviceable condition has gotten very difficult over the years.  That's  why we're working to bring you brand new reproductions in a paintable  satin black finish.  No more trying to make chrome aftermarket pulleys  look at home under the hood of your restoration project!
    • Chevy V8 Dual Groove Short Water Pump Pulley
    • Satin black finish
    • Replaces GM # 3995642
    • 6.25" total O.D.
  • Moroso 64060 Chevy Short Pump Double Groove Crank Pulley
    Moroso 64060 Chevy Short Pump Double Groove Crank Pulley
    (Part #54564060)
    x
                S/B Chevy, double groove cast aluminum lower pulley, 25% reduction. Available for short water pumps. 5/8" shaft.
    • Precision machined from high grade, lightweight aluminum castings
    • Extra-deep belt grooves provide added belt retention during rapid changes in engine RPM
    • Small pulley diameter slows fan, water pump, and alternator speed to reduce horsepower-robbing drag
    • High RPM water pump operation is improved, reducing impeller speed below cavitation threshold
    • 5-3/8" diameter
  • Snow White Small Block Ford Shorty Water Pump, 3-Groove Pulley
    Snow White Small Block Ford Shorty Water Pump, 3-Groove Pulley
    (Part #9102309)
    x
                
    • Positions lower hose (inlet) on the passenger side (1-3/4" diameter)
    • Allows use of a Chevy style radiator
    • 2" shorter than stock Ford pump 
    • Weighs 13.75 lbs. less than stock cast iron pump set-up
    • Fits 1963-1988 Ford 302 and 351 (Cleveland or Windsor)
    • Includes standard aluminum water pump
    • Aluminum adapter included
    • Aluminum 3-groove crank pulley and 2-groove water pump pulley for cars with A/C
  • Tuff Stuff 1354NA 1955-68 S/B Chevy Chrome Water Pump
    Tuff Stuff 1354NA 1955-68 S/B Chevy Chrome Water Pump
    (Part #91015541)
    x
                

    These water pumps are chrome plated and are perfect for your 1955-68 small block Chevy "driver."

    • 3/4" NPT top port
    • 1/2" NPT side port

    1955-1968 Small Block Chevy Water Pump Installation Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.    

  • Modular Electric Water Pump Adapters for Small Block Chevy
    Modular Electric Water Pump Adapters for Small Block Chevy
    (Part #911885)
    x
                

    Check out our adapters for our newest Small Block Chevy high volume electric water pump. These engine water pump adapters are machined from billet aluminum and the fit & finish is excellent. 

    • Aluminum
    • Polished
    • Sold as a Pair
    • Designed to work with our modular electric water pump housing (911880)
  • 1969-85 Small Block Chevy Double Groove Upper Pulley, Long Water Pump
    1969-85 Small Block Chevy Double Groove Upper Pulley, Long Water Pump
    (Part #91015427)
    x
                

    These upper pulleys for 1969-85 long water pumps feature a double groove with a beautiful chrome finish.  They will work with 283-350 V8 small block Chevy engines.

    • Upper pulley
    • 1969-85 283-350 V8 small block Chevy engine
    • Long water pumps
    • Double groove  
    • 6-1/4" Diameter
    • Chrome plated finish

    Note:  Use our lower pulley (91015428) to correspond for proper alignment with these upper pulleys.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

     

  • King Chrome Small Block Chevy 1969-86 Long Water Pump
    King Chrome Small Block Chevy 1969-86 Long Water Pump
    (Part #91315467)
    x
                

    King Chrome standard flow, "long leg" style water pump designed for 1969-86 small block Chevy (SBC) V8s. Made from OEM castings, King Chrome housings are hand polished to a higher standard before being triple chrome-plated for a show-quality finish. Housings are then assembled using all NEW components.

    • Hand polished and triple chrome plated
    • "Long" style pump for 1969-85 engines
    • 6-15/16" from block surface to face of pulley flange
    • Drilled & tapped for factory accessories

    Learn about the differences between "short" and "long" style Chevy water pumps by reading our tech article, SBC - Short vs Long Water Pump

  • B/B Chevy 396-454 Electric Water Pumps
    B/B Chevy 396-454 Electric Water Pumps
    (Part #57545407)
    x
                

    Electric Racing Water Pumps feature a specially machined housing to maximize flow. The lightweight aluminum assembly is flow-rated at 35+ gallons per minute and weighs less than 7 lbs. Pump draws 6-7 amps.

    • Joints feature “O” ring gaskets for a perfect seal
    • Black powdercoat finish
    • Includes mounting hardware and wiring pig tail
    • Length of aluminum inlet 3.375" (.75" of which is threaded 3/4")
    • Block mount center to center: 2.30"
    • From pump bottom to mounting surface: 1.625"
    • From top of outlet shoulder to mounting surface: 3.625"
    • Diameter of the pump: 4.00"
    • Length outside to outside shoulders: 11.75"
    • 10.00" of wiring off the pump, 5.00" off pigtail

  • Small Block Ford 289-351W Water Pump, RH Inlet
    Small Block Ford 289-351W Water Pump, RH Inlet
    (Part #91015544)
    x
                

    Use this water pump on your 289, 302, 351W Small Block Ford engine and gain much needed steering and fuel pump clearance. With its passenger side inlet, this pump lets Ford-powered street rods take advantage of less expensive and more available "Chevy outlet position" radiators. Plain steel finish.

    • This pump measures 5-1/2" from mounting surface to pulley mount flange
    • This pump is not for a serpentine belt system
    • The fan hub has a 1-3/4" bolt pattern
    • The lower hose is on the passenger side and accepts a 1-3/4" hose

    Small Block Ford Water Pump Installation Instructions (PDF)

  • Ford 302/351W High Performance Aluminum Short Water Pump
    Ford 302/351W High Performance Aluminum Short Water Pump
    (Part #91015585)
    x
                

    Each aluminum pump is manufactured from T6 aluminum and features a revised impeller entry with curved vanes for maximum flow, pressure and equal distribution to both sides of the block. It also features a unique seal assembly for leak proof operation.

    • Fan hub has a 1-3/4" bolt pattern
    • The lower hose comes out on the driver's side and uses a 1-3/4" lower hose

    Includes a heavy duty bearing and 3/4" shaft and pulley snout; and 1/2" NPT hole on the passenger side (for heater hose) and on the top (for by-pass hose). Thicker (0.100") stamped steel rear plate. Weighs 6 lbs.

    Ford 302/351W Water Pump Installation Instructions (PDF)

  • Chevy 230/250 Inline 6 Cast Iron Water Pump
    Chevy 230/250 Inline 6 Cast Iron Water Pump
    (Part #91013010)
    x
                
    • OE style impeller delivers stock coolant flow rate
    • Hardened bearing shaft for even wear and durability
    • OE style cast iron  pump body
    • Precision machined hub runs smoothly under heavy loads
    • OE style bearings
  • Small Block Chevy Aluminum Water Pump, Long
    Small Block Chevy Aluminum Water Pump, Long
    (Part #91015590)
    x
                

    Lightweight aluminum long style pump for S/B Chevy. Has provisions for your power steering mount.

    NOTE: This pump is designed for street use and is not to be run on a motor which exceeds 5,500 RPM.

    910-15590 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.   

  • Zips Small Block Chevy Water Pump Riser
    Zips Small Block Chevy Water Pump Riser
    (Part #9102306)
    x
                
    • Water pump riser solves the common problem of the fan being mounted too low on the radiator to be effective
    • Raises the pump and mechanical fan 5" higher in the engine compartment
    • Provides mounting surfaces for an A/C compressor and alternator
    • Riser housing comes with brackets and hardware
    • Water pump not included (use Chevy 250 L6 water pump)

    910-2306 Instructions (PDF)

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump.

  • Modular Electric Water Pump Adapters for Big Block Chevy
    Modular Electric Water Pump Adapters for Big Block Chevy
    (Part #911886)
    x
                

    Check out these adapters for our newest high volume electric water pump for Big Block Chevys. These adapters have been machined from billet aluminum and the fit & finish is excellent.

    • Aluminum Construction
    • Designed to work with our modular electric water pump housing (911880)
    • Polished Finish
    • Sold Individually
  • Polished Aluminum 348/409 Chevy Aluminum Water Pump
    Polished Aluminum 348/409 Chevy Aluminum Water Pump
    (Part #91015564)
    x
                

    If you are spending the money to build a 348 or 409 Chevy engine you had just as well put a high performance aluminum water pump on it. Threaded on top for heater hose fitting. Barbed hose fitting included. Comes with gaskets.

  • 1955-1968 Chevy Short Pump Double Groove Upper Pulley
    1955-1968 Chevy Short Pump Double Groove Upper Pulley
    (Part #91015423)
    x
                

    Chrome upper Small Block Chevy pulley for 1955-1968 short pumps.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

Goto Previous PagePrevious Page
1 2 3 4