Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

Suspension

Shop T-Bucket Suspension At Speedway Motors

Speedway Motors is your number one source for T-Bucket suspension components! Speedway stocks a huge inventory of suspension parts, plus the shocks from AFCO and Bilsein, T-Bucket springs, dropped I-beam axles and other specialized components you need to finish any T-Bucket suspension project. You can improve the ride of your classic street rod with Speedway’s selection of spindles, springs, rear end covers or complete suspension kits. We also offer the best in air ride setups and coilover kits.

Featured Products
  • Shock Mount Studs
    $3.99
    Product Rating: 4.82 Stars
    Shock Mount Studs
    (Part #91036096)
    x
                

    Shock mounting stud is approximately 3-5/8" in overall length. The part where the shock rides, is 5/8" O.D. and approximately 1-1/4" wide and the threads at the shock end are 7/16"-20, about 7/8" long. The threads at the bracket end are 1/2"-20, about 1-1/8" long.

    Studs sold individually.

     

  • Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole
    Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole
    (Part #1750757)
    x
                3/4" heim for steering shaft.  Has .757 ball hole. Slides right over standard 3/4" steering shaft. 3/4" NF right hand threads. Jam nut sold separately.


  • Heidts SB-012 Sway Bar Bracket Kit for Tubular Full Lower Control Arms
    Heidts SB-012 Sway Bar Bracket Kit for Tubular Full Lower Control Arms
    (Part #413012)
    x
                

    This stabilizer bar bracket kit from Heidts is for tubular full lower A-Arms. These brackets bolt onto the control arms for a quick and simple installation. These brackets will only work on strut-less style control arms designed for stock coil springs. They will not bolt onto a coil over type arm as most of those do not have a plate in the center of them to bolt anything onto them.

    • Steel Construction
    • Hardware Included
    • Sold as Kit
    • Natural Finish

    Installation Instructions (PDF)

     

  • Axle Spring Perch, Plain Forged Steel
    Axle Spring Perch, Plain Forged Steel
    (Part #91033047)
    x
                Works with 1928-34 Ford front ends with 1-3/4" wide cross spring. Extra long for lower shock mounts. Includes nylock nut.
    • 2-1/2" from top of threads to mid shoulder
    • 2-7/8" from top of threads to top of shoulder
    • Thread length is 1-7/8"
    • Distance from the top of the shoulder to the bottom of the threads is 4-3/4"

    Leaf Spring Measuring Guide (Link)

  • 38 Inch Rear Ladder Bar Kit
    $399.99
    New
    38 Inch Rear Ladder Bar Kit
    (Part #91645159)
    x
                

    Our ladder bar kit includes one pair of 38" long heavy wall ladder bars, 3/4" heavy duty front rod end and jam nuts, stainless steel 11 degree 5/8" rear rod ends and jam nut,  lower coil over mounts and rear axle brackets. Welding and fitting required.

    • 3/4" heavy duty front rod end and jam nuts
    • Stainless steel 11 degree 5/8" rear rod ends and jam nut
    • Lower coil over mounts and rear axle brackets
    • Welding and fitting required 

    916-45159 Instructions (pdf)

  • Nylon Shackle Kits, 1-3/4 Inch Wide Spring
    Nylon Shackle Kits, 1-3/4 Inch Wide Spring
    (Part #91033323)
    x
                

    Fits front or rear springs. All measurements are width of spring. All nylon bushed shackles are 1-1/2" shackle bolt center to shackle bolt center.

    Bushings are included. Bushing O.D. is 3/4".

     

    Leaf Spring Measuring Guide (Link)

  • Eagle Motorsports Chassis Repair Tool
    Eagle Motorsports Chassis Repair Tool
    (Part #96000420)
    x
                

    Eagle Motorsports factory-built component. This torsion mandrel tool is perfect for straightening bent tubes and spuds.

    • Works for 1-1/8" torsion bar tube size
    • Use for quick fixes at the track
    • Able to straighten spuds or tubes
    • Precision tuned high strenght steel

     

  • Speedway 1928-1948 Ford Forged Spindles w/ King Pins
    Speedway 1928-1948 Ford Forged Spindles w/ King Pins
    (Part #91032104)
    x
                

    These Speedway spindles are one piece, drop forged design constructed of high strength 4140 steel, which makes them superior to original components. These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford king pins.

    These spindles fit Ford axles from '28-'48. They can be used with period correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from '28-'36.

    • Uses 1937-1941 king pin kit
    • For Ford axles 1928-1948
    • Will not work with 1928-1936 Hubs
    • Includes king pin kit

    Be sure to include our spindle nut kit (910616004) to properly install these spindles.

    Spindle Identification Guide (GIF)

    910-32104 Instructions (PDF)

Filter

"T-Bucket, Suspension" Page 1 of 50

Page 1 of 50

  • AFCO 23600CR 10 Inch Extreme Chrome Coil-Over Spring, 600 Rate
    AFCO 23600CR 10 Inch Extreme Chrome Coil-Over Spring, 600 Rate
    (Part #10623600CR)
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • Leaf Spring Liner with Lip, 2-1/4 Inch
    Leaf Spring Liner with Lip, 2-1/4 Inch
    (Part #91033038)
    x
                Equal partners in a smooth-riding leaf spring suspension are quality shocks and friction-free movement of the spring leafs. This special compound of poly-vinyl plastic has a very "slippery" surface which works as a permanent dry lubricant to eliminate interleaf friction and squeaking. It also features a small lip to keep it in place. 

    One 20 ft. roll does one cross spring. Liner is less than 1/16" thick.

  • AFCO 5/8 Inch Shock Bearing
    $10.99
    AFCO 5/8 Inch Shock Bearing
    (Part #1080TX)
    x
                Mid-to-heavyweight cars can destroy a rubber mount bushing in no time.   Instead, use spherical bearings which don't compress and allow operation   at far greater mounting angles. Works with AFCO 5/8" bearing end   shocks (except K-Series).                               
    • 5/8" I.D.
    • 1/2" wide
    • Bearing only
  • Heidts SB-012 Sway Bar Bracket Kit for Tubular Full Lower Control Arms
    Heidts SB-012 Sway Bar Bracket Kit for Tubular Full Lower Control Arms
    (Part #413012)
    x
                

    This stabilizer bar bracket kit from Heidts is for tubular full lower A-Arms. These brackets bolt onto the control arms for a quick and simple installation. These brackets will only work on strut-less style control arms designed for stock coil springs. They will not bolt onto a coil over type arm as most of those do not have a plate in the center of them to bolt anything onto them.

    • Steel Construction
    • Hardware Included
    • Sold as Kit
    • Natural Finish

    Installation Instructions (PDF)

     

  • Tribute T Modified Split Wishbones
    Tribute T Modified Split Wishbones
    (Part #71545127)
    x
                It doesn't get much more traditional than running a  set of split wishbones. These split bones are all new with forged front yokes just  like Henry built them and fit a 2-1/4" axle boss. Modified 5/8" spring  perch boss as used on our Tribute-T kit.
    • 40-3/4" from the front perch bolt centerline to the end of the 11/16"-18 threaded rear bung
    • 5/8" sleeved bore behind axle to allow for spring perch mounting
    • Material thickness is 12 GA (0.1046")
    • Fully boxed
  • Speedway Steel 5/16 Inch LH Male Heim Joint Rod Ends with Stud
    Speedway Steel 5/16 Inch LH Male Heim Joint Rod Ends with Stud
    (Part #1750322)
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of.  They are teflon lined.
            
  • 3/8 X 3/8 Clevis
    $7.99
    3/8 X 3/8 Clevis
    (Part #6680116)
    x
                The correct clevis for mounting our rack and pinion units (668-0105 & 668-0115). 
            
  • AFCO Non-Adjustable Alum. Coil-Over Shock Kit, 7 Inch Stroke, 13 Inch Comp.
    AFCO Non-Adjustable Alum. Coil-Over Shock Kit, 7 Inch Stroke, 13 Inch Comp.
    (Part #1061370)
    x
                

    AFCO has been building racing shocks for over 20 years and are now applying their technology to street rod shocks. These aluminum coilover shock kits have superior FIXED valving that will give you a better ride and improve handling.

    • Each shock is hand built and dyno tested
    • Supplied with two 5/8" I.D. polyurethane bushings
    • Includes AFCO Mirror Finish coilover springs in the rate of your choice
    • Kit includes (2) shocks, (2) springs, and (2) coil-over hardware kits
  • Spindle Nuts for Mustang II Spindle
    Spindle Nuts for Mustang II Spindle
    (Part #91631936)
    x
                

    These spindle nuts are for your Mustang II Spindle. They are a combination of a castle nut and a washer.

    • Includes Cotter Pin
    • Sold as Pair
    • Combination of castle nut and washer
  • AFCO 23500CR 10 Inch Extreme Chrome Coil-Over Spring, 500 Rate
    AFCO 23500CR 10 Inch Extreme Chrome Coil-Over Spring, 500 Rate
    (Part #10623500CR)
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • AFCO 22375CR 12 Inch Extreme Chrome Coil-Over Spring, 375 Rate
    AFCO 22375CR 12 Inch Extreme Chrome Coil-Over Spring, 375 Rate
    (Part #10622375CR)
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • AFCO 28300-1CR 8 Inch Extreme Chrome Coil-Over Spring, 300 Rate
    AFCO 28300-1CR 8 Inch Extreme Chrome Coil-Over Spring, 300 Rate
    (Part #106283001CR)
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • Ford Upper Steering Arm, Chrome, 7-3/4 Inch, 5/8 Hole
    Ford Upper Steering Arm, Chrome, 7-3/4 Inch, 5/8 Hole
    (Part #91632012)
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). This design is available in 6-1/4" or 7-3/4" lengths. The longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. Tapped 5/8" end accepts spherical rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Bilstein F4-BOA-0000788 Chrome Front Shock, 12-13 Inch Ride Height
    Bilstein F4-BOA-0000788 Chrome Front Shock, 12-13 Inch Ride Height
    (Part #2131354)
    x
                

    You will find Bilstein shocks as standard equipment on all the European sports and luxury cars. Now you can have Bilstein shocks for your street rod as well. Beautifully chrome plated. 7/16" top bushing and 5/8" bottom. The inner sleeve is 3/4" on these shocks so removing the sleeve will net a 3/4" I.D. and will not work on shock mounts with a smaller O.D.

    Main body is 8-3/4" long to the center of the mounting bushing 

  • FK Rod Ends SJM10T Stainless Steel 5/8 Inch RH Male Heim Joint
    FK Rod Ends SJM10T Stainless Steel 5/8 Inch RH Male Heim Joint
    (Part #1750716)
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 5/8" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • Carrera 2254D Street Rod Rear Coil Over Shock Kit, 200 lbs. Rate
    Carrera 2254D Street Rod Rear Coil Over Shock Kit, 200 lbs. Rate
    (Part #2552254D)
    x
                

    Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.

    Each kit includes:

    • (1) Chrome 1.63" steel body shock
    • (1) Chrome 10" spring
    • (1) Polished aluminum spring mounting kit
    • Mounted Length:  12-3/8"
    • Compressed Length:  9-3/4"
    • Extended Length:  14-5/8" 
    • Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing

    Coil-Over Mounting Guide (GIF)

    Carrera Spring Rate Chart (GIF)

    Coil-Over Illustration (Link)

  • Speedway Steel 1/2 Inch LH Female Heim Joint Rod Ends with Stud
    Speedway Steel 1/2 Inch LH Female Heim Joint Rod Ends with Stud
    (Part #1750425)
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are Teflon lined.
            
  • AFCO 27300-1CR 7 Inch Extreme Chrome Coil-Over Spring, 300 Rate
    AFCO 27300-1CR 7 Inch Extreme Chrome Coil-Over Spring, 300 Rate
    (Part #106273001CR)
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • AFCO 23250CR 10 Inch Extreme Chrome Coil-Over Spring, 250 Rate
    AFCO 23250CR 10 Inch Extreme Chrome Coil-Over Spring, 250 Rate
    (Part #10623250CR)
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. This new mirror finish spring line has all the great looks of a chrome spring with no damaging side-effects associated with chemical plating.

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter
    • 3-3/8" outside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • AFCO 23125CR 10 Inch Extreme Chrome Coil-Over Spring, 125 Rate
    AFCO 23125CR 10 Inch Extreme Chrome Coil-Over Spring, 125 Rate
    (Part #10623125CR)
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 50