Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 4

Products

Steering Shaft, U-Joints and Couplers

Shop T-Bucket Steering At Speedway Motors

Let Speedway Motors "Steer" you in the right direction with the right steering components for your T-Bucket! From steering U-joints from Sweet Mfg. to the top steering columns and drop mounts from Ididit, we've got the best parts at the best prices around. Don't forget to add a Speedway Motors aluminum steering wheel for the feel behind the wheel that can't be duplicated.

Featured Products
  • Ididit Steering Column Floor Mount Boot
    Ididit Steering Column Floor Mount Boot
    (Part #4462405)
    x
                This is the boot for Ididit steering column floor mount kits 446-2400, 446-2401, and 446-2402.
            
  • 3/4 O.D. Solid Steel Steering Shaft
    From: $12.99
    Product Rating: 5.00 Stars
    3/4 O.D. Solid Steel Steering Shaft
    (Part #91632200)
    x
                

    Speedways steering shaft is made for you to cut-to-fit. This steering shaft entails:

    •  3/4" O.D.
    • 1018 solid steel steering shaft
    • Available in 24", 36", 48", 60" and 72" lengths

     

    Steer Shaft Application Chart

  • Speedway Steering Coupler, 3/4 Inch-36 to 3/4 Inch Round, Non-Flex
    Speedway Steering Coupler, 3/4 Inch-36 to 3/4 Inch Round, Non-Flex
    (Part #91031581)
    x
                These steel couplers are splined on one end and has a 3/4" round hole on the other. This Mustang II power rack U joint coupler is 2" L x 1.060" D. 
    • 3/4"-36 to 3/4" round
    • Steel
    • Black oxide coating
    • Commonly used on GM Manual and Mustang II Power rack
    • 2" L x 1.060" OD

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.


     

  • Sweet Mfg Steering U-Joint, 3/4 In Round to 3/4 In Round, Universal
    Sweet Mfg Steering U-Joint, 3/4 In Round to 3/4 In Round, Universal
    (Part #91032234)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering u-joints available. Made by Sweet Manufacturing. These steering universal joints have 3/4 weld-on ends.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • AFCO 30321 Steering Support Bearing
    AFCO 30321 Steering Support Bearing
    (Part #10630321)
    x
                Self-aligning bearing can be installed in firewall or mid-plate to support steering shaft 
            
  • AFCO 30315 Coupler Bore, 3/4 Inch-36 Spline
    AFCO 30315 Coupler Bore, 3/4 Inch-36 Spline
    (Part #10630315)
    x
                

    AFCO Coupler Bore for GM Standard and Pinto Power Steering

    • 3/4"-36 spline x 3/4" round weld-on

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

  • Polished Stainless Steel 3/4 O.D. Double D Shaft
    Polished Stainless Steel 3/4 O.D. Double D Shaft
    (Part #91032377)
    x
                

    Steering shafts that are just plain looking look kind of silly with those shiny stainless steel U-joints. Our polished, stainless steel, double D steering shaft would be more compatible. We offer steering shafts in 18", 22", and 36" cut to fit lengths.

     

  • Sweet Mfg Steering U-Joint, 3/4 Inch DD to 3/4 Inch DD, Universal
    Sweet Mfg Steering U-Joint, 3/4 Inch DD to 3/4 Inch DD, Universal
    (Part #91032298)
    x
                Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. This universal joint is 3.875 inches long and 1.375 inches in diameter.
    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Filter

"T-Bucket, Steering Shaft, U-Joints and Couplers" Page 1 of 4

Page 1 of 4

  • Sweet Mfg Steering U-Joint, 5/8-36 Spline 3/4 DD, Vega/Corvair/GM Rack
    Sweet Mfg Steering U-Joint, 5/8-36 Spline 3/4 DD, Vega/Corvair/GM Rack
    (Part #91032291)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature full compliment bearings and a 5/8"-36 spline.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 5/8"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • AFCO 30307 U-Joint, 9/16 Inch-26 Spline
    AFCO 30307 U-Joint, 9/16 Inch-26 Spline
    (Part #10630307)
    x
                

    These splined U-joints feature a set screw & lock-nut.  Maximum operation angle of this steering universal joint is 32°.

    • 9/16"-26 spline x 3/4" round weld-on
    • Greased needle bearing with Teflon seal
    • Forged 1045 steel
    • Broached spline for better fit
    • Heat-treated forgings
    • 1-1/8" O.D. x 3-3/4" length

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg Chrome U-Joint, 3/4-30 Spline to 3/4 DD, Small GM P/S '78-Up
    Sweet Mfg Chrome U-Joint, 3/4-30 Spline to 3/4 DD, Small GM P/S '78-Up
    (Part #9106151)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-30 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Double U-Joint, 5/8 36-Spline to 3/4 DD, Vega/Corvair/GM
    Sweet Mfg. Double U-Joint, 5/8 36-Spline to 3/4 DD, Vega/Corvair/GM
    (Part #9103245)
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.

    • Overall length is 5-1/2”
    • O.D. at ends is 1.12”
    • O.D. in the middle is 1.476”
    • O.D. at caps is 1.350”
    • O.D. at cap retainer screws is 1.545”
    • Length of center section is 2-3/4”
    Learn more about u-joints and steering systems by reading our tech article, U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg U-Joint, 3/4 In Round to 1 In DD, GM Column/Universal
    Sweet Mfg U-Joint, 3/4 In Round to 1 In DD, GM Column/Universal
    (Part #91032390)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4 round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 17MM DD, 3/4DD, Corvette, Citation Rack
    Sweet Mfg Steering U-Joint, 17MM DD, 3/4DD, Corvette, Citation Rack
    (Part #9106171)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg U-Joint, 1 In DD to 3/4 DD, IDIDIT/Flaming River Column
    Sweet Mfg U-Joint, 1 In DD to 3/4 DD, IDIDIT/Flaming River Column
    (Part #91032401)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing.

    These steering universal joints are CNC machined from aircraft steel to precision tolerances. The sealed needle bearing design will last ten times longer than a standard pin and block universal joint. The unique nickel plating prevents rust without the hassle of painting.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Steering U-Joint, 1 In 48-Spline to 3/4 In Round, GM Column
    Sweet Mfg. Steering U-Joint, 1 In 48-Spline to 3/4 In Round, GM Column
    (Part #91032240)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 1"-48 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Unisteer 8050300 Steering U-Joint, 3/4 Inch Double D to 3/4 Inch DD
    Unisteer 8050300 Steering U-Joint, 3/4 Inch Double D to 3/4 Inch DD
    (Part #910300)
    x
                

    These polished stainless steel steering U-joints look great and use a pinch bolt on each end for easy installation.

    This particular steering universal joint is made to fit 3/4"DD shafting on both sides. Both sides incorporate the pinch bolt design.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    NOTE:  These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.

  • Sweet Mfg Chrome U-Joint, 3/4-30 Spline to 1 DD, Small GM P/S '78-Up
    Sweet Mfg Chrome U-Joint, 3/4-30 Spline to 1 DD, Small GM P/S '78-Up
    (Part #9106152)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-30 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 9/16-26 Spline, 1 DD, Mustang II Manual
    Sweet Mfg Steering U-Joint, 9/16-26 Spline, 1 DD, Mustang II Manual
    (Part #9106132)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 9/16"-26 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Double Steering U-Joint, .620 In-36 Spline to 3/4 In Round, Chrysler
    Double Steering U-Joint, .620 In-36 Spline to 3/4 In Round, Chrysler
    (Part #91032274)
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • AFCO 30309 U-Joint, 5/8 Inch-36 Spline
    $64.99
    $69.99
    AFCO 30309 U-Joint, 5/8 Inch-36 Spline
    (Part #10630309)
    x
                

    These splined U-joints feature a set screw & lock-nut.  Maximum operation angle of this steering universal joint is 32°.

    • 5/8"-36 spline x 3/4" round weld-on
    • Greased needle bearing with Teflon seal
    • Forged 1045 steel
    • Broached spline for better fit
    • Heat-treated forgings
    • 1-1/8" O.D. x 3-3/4" length

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg. Double U-Joint, 3/4 In Round to 3/4 In DD, Universal
    Sweet Mfg. Double U-Joint, 3/4 In Round to 3/4 In DD, Universal
    (Part #9103244)
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. Made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Chrome U-Joint, 3/4-48 Spline to 1 In DD, Wilwood, MGB
    Sweet Mfg Chrome U-Joint, 3/4-48 Spline to 1 In DD, Wilwood, MGB
    (Part #9106102)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-48 Spline
    • Wilwood, Sweet, Jaguar, MGB
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Double U-Joint, 5/8-36 Spline 3/4 Round, Vega/Corvair/GM
    Sweet Mfg. Double U-Joint, 5/8-36 Spline 3/4 Round, Vega/Corvair/GM
    (Part #9103225)
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    • Overall length is 5-1/2”
    • O.D. at ends is 1.12”
    • O.D. in the middle is 1.476”
    • O.D. at caps is 1.350”
    • O.D. at cap retainer screws is 1.545”
    • Length of center section is 2-3/4”
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

     

  • Sweet Mfg Steering U-Joint, 3/4-48 Spline to 3/4 DD, Wilwood, MGB
    Sweet Mfg Steering U-Joint, 3/4-48 Spline to 3/4 DD, Wilwood, MGB
    (Part #9106101)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-48 Spline
    • Wilwood, Sweet, Jaguar, MGB
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. 401-51221 U-Joint, 3/4 Inch-36 Spline to 3/4 Inch-20 Spline
    Sweet Mfg. 401-51221 U-Joint, 3/4 Inch-36 Spline to 3/4 Inch-20 Spline
    (Part #91032287)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. All of these steering universal joints have 3/4 weld-on ends.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

     

  • Sweet Mfg. Steering U-Joint, 1 Inch-48 Spline to 3/4 Inch DD, GM Column
    Sweet Mfg. Steering U-Joint, 1 Inch-48 Spline to 3/4 Inch DD, GM Column
    (Part #91032297)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are 1"-48 spline.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 1"-48 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Unisteer 8050850 Steering U-Joint, 3/4 Inch 36-Spline to 3/4 In Smooth
    Unisteer 8050850 Steering U-Joint, 3/4 Inch 36-Spline to 3/4 In Smooth
    (Part #910850)
    x
                

    These polished stainless steel steering U-joints look & function beautifully and use non-pinch bolts which will need to be either welded, cross-drilled and pinned or bolted These steering universal joints are 3-3/4 inch in length and are 1.650 inch in outside diameter. 

    • The OD is 1.650" (41.90mm) 
    • 3-3/4" in total length
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.
Goto Previous PagePrevious Page
1 2 3 4