Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop T-Bucket Steering At Speedway Motors

Let Speedway Motors "Steer" you in the right direction with the right steering components for your T-Bucket! From steering U-joints from Sweet Mfg. to the top steering columns and drop mounts from Ididit, we've got the best parts at the best prices around. Don't forget to add a Speedway Motors aluminum steering wheel for the feel behind the wheel that can't be duplicated.

"T-Bucket, Steering Column" Page 1 of 4

  • Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome
    Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 32" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1232C Instructions (PDF)

  • Ididit 2402500040 Steering Column Ball Swivel Lower Mount, 2-1/4 Inch
    Ididit 2402500040 Steering Column Ball Swivel Lower Mount, 2-1/4 Inch
    x
                

    Mounting your steering column to the firewall or floor can be a real challenge. Ididit's billet aluminum ball swivel style mounts make this task much easier.

    Note: This mount may require slight modification to the I.D. of the ball or O.D. of the column end due to variation between manufacturers. It is not for chrome columns.

    446-4250 Instructions (PDF)

  • Ididit 1250280010 Floor Shift Collapsible RH Drive Steering Column
    Ididit 1250280010 Floor Shift Collapsible RH Drive Steering Column
    x
                For the dedicated hobbyist overseas, the Ididit Collapsible Series RH Drive floor shift tilt columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Right Hand Drive Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit. Available in paintable steel.
    • RH Drive
    • Paintable steel
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Ididit 1120300010 Tilt Wheel Steering Column, 30 Inch, Plain
    Ididit 1120300010 Tilt Wheel Steering Column, 30 Inch, Plain
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Plain steel finish

    Measures 30" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1230D Instructions (PDF)

  • 55 Degree Steering Column Mount for T-Bucket Kit
    55 Degree Steering Column Mount for T-Bucket Kit
    x
                
    These mounts are the economical mounting solution for T-bucket steering columns.  They are designed to be used in conjunction with our 1-3/4" diameter stainless or plain steel hot rod steering columns.
    • Mount puts the steering column at a 55 degree angle to the firewall
    • Fits all of our deluxe "T" bodies with the floor / firewall installed
    • Designed to be used with a 1-3/4" diameter steering column
  • Ididit 1120280010 Tilt Wheel Steering Column, 28 Inch, Plain
    Ididit 1120280010 Tilt Wheel Steering Column, 28 Inch, Plain
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Plain steel finish

    Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1228D Instructions (PDF)

  • 1923 T-Bucket Deluxe Steering Column Kit, Chevy Mount, Polished Stainless
    1923 T-Bucket Deluxe Steering Column Kit, Chevy Mount, Polished Stainless
    x
                These steering column kits are perfect for finishing off the steering  system in your '23 T-Bucket Kit car.  They come complete with the  steering column, the mount plate that bolts into our new bodies, and the  proper DD intermediate shafts and U-joints.  The steering column features a 1-3/4" polished stainless steel tube, real ball bearings for  smooth shaft operation and a polished aluminum quick release hub that  will accept the common Grant steering wheel 3-bolt pattern. 15 gauge  mild steel. The 3/4" O.D. DD shaft has a 1.00" long "D" design on each  end. Made from 1018 steel, weld-on.
    • Includes column, mount plate, and DD intermediate shafts and U-joints
    • For our '23 T kits
    • Included U-Joints:
      • Full compliment bearings
      • Forged Vanadium steel yokes and u-joint
      • Highest quality for racing
      • Features needle bearing u-joints
      • 91032298 U-Joint: 3.875" L x 1.375" D
      • 91032291 U-joint: 5/8"-36 Spline

    Steering Column Instructions (PDF)

  • Lokar DUK-2200 Steering Column Dress-Up Kit, Brushed Aluminum
    Lokar DUK-2200 Steering Column Dress-Up Kit, Brushed Aluminum
    x
                

    3-piece Seamless Steering Column Dress-Up Kit. Unique one-piece solid billet aluminum design. Kit includes Turn Signal Lever, Tilt Steering Lever and Emergency Flasher Knob. Kit fits all GM, 1969 through 1976 Chrysler, and all aftermarket columns with single screw design.

    • No steel and chrome combinations.
    • Appearance is smooth and sleek. 
    • Adds class and style to any column.
  • Nostalgia 2 Inch Steering Column Drop, 1-1/2 Inch Hole
    Nostalgia 2 Inch Steering Column Drop, 1-1/2 Inch Hole
    x
                

    Beautifully polished cast aluminum steering column drop for early Ford steering columns (1-1/2" diameter tube) with column shift. Can be reworked to fit other makes of cars.

    Note: Column drop length shown is measured from the centerline of the column to the column drop mount surface.

  • Ididit 1130330020 Tilt Wheel Steering Column w/ Shift, 33 Inch, Chrome
    Ididit 1130330020 Tilt Wheel Steering Column w/ Shift, 33 Inch, Chrome
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 33" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1333C Instructions (PDF)

  • Ididit 2402300010 Steering Column Band Swivel Lower Mount, 2-1/4 Inch
    Ididit 2402300010 Steering Column Band Swivel Lower Mount, 2-1/4 Inch
    x
                

    Mounting your steering column to the firewall or floor can be a real challenge. Ididit's steel band swivels are an easy and inexpensive solution.

    446-4030 Instructions (PDF)

  • Speedway Universal Steering Column Mount, 2 Inch
    Speedway Universal Steering Column Mount, 2 Inch
    x
                These versatile mounts install at any angle to solidly mount your steering column.
    • Available in 2" diameter
    • Choose from black or stainless steel
  • Ididit 1130280020 Tilt Wheel Steering Column w/ Shift, 28 Inch, Chrome
    Ididit 1130280020 Tilt Wheel Steering Column w/ Shift, 28 Inch, Chrome
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1328C Instructions (PDF)

  • Ididit 1300280010 28 Inch Plain Collapsible Tilt Steering Column
    Ididit 1300280010 28 Inch Plain Collapsible Tilt Steering Column
    x
                
    The Ididit Collapsible Series columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit.
    • Paintable steel
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Ididit 1300320020 32 Inch Chrome Collapsable Tilt Steering Column
    Ididit 1300320020 32 Inch Chrome Collapsable Tilt Steering Column
    x
                The Ididit Collapsible Series columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit. Available a chrome plated finish.
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 5-1/2 Inch Drop
    Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 5-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two hex screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 5-1/2 Inch drop
    • 2-7/8" mount hole spacing
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Tribute T Steering Column Kit
    $299.99
    Product Rating: 5.00 Stars
    Tribute T Steering Column Kit
    x
                Please view the product's page for more information
            
  • Lokar DUK-2201 Steering Column Dress-Up Kit, Polished Aluminum
    Lokar DUK-2201 Steering Column Dress-Up Kit, Polished Aluminum
    x
                

    3-piece Seamless Steering Column Dress-Up Kit. Unique one-piece solid billet aluminum design. Kit includes Turn Signal Lever, Tilt Steering Lever and Emergency Flasher Knob. Kit fits all GM, 1969 through 1976 Chrysler, and all aftermarket columns with single screw design.

    • No steel and chrome combinations.
    • Appearance is smooth and sleek. 
    • Adds class and style to any column.
  • Flaming River FR20001SS 1-3/4 Inch Tilt Floor Shift Column, Stainless
    Flaming River FR20001SS 1-3/4 Inch Tilt Floor Shift Column, Stainless
    x
                

    Don't you wish you had a little more room than that roadster column gives you? This 30" tilt column has a 1-3/4 " tube diameter so it can replace your existing column easily. It accepts the normal '69-'94 GM steering wheel adapters, 1" DD u-joints, as well as common GM turn signal connectors.

    • All new components (not from a junkyard)
    • Made of 304 grade stainless steel tubing
    • For use with floor shifters (no column shift provisions)
    • Includes Billet Dress Up Kit (tilt/turn signal levers and hazard knob)
    • GM wiring (4-1/4" connector)
    • Made in the USA

     

  • Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 3-1/2 Inch Drop
    Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 3-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 3-1/2 Inch drop
    • Mount hole spacing is 2-7/8".
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 3-1/2 Inch Drop
    Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 3-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two hex screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 3-1/2 Inch drop
    • 2-7/8" mount hole spacing
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Ididit 1250320020 32 In Collapsible RH Drive Tilt Steering Column
    Ididit 1250320020 32 In Collapsible RH Drive Tilt Steering Column
    x
                
    For the dedicated hobbyist overseas, the Ididit Collapsible Series RH Drive floor shift tilt columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Right Hand Drive Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit.
    • RH Drive
    • Chrome finish
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Ididit 2401010010 2 Inch Floor Mount For Collapsible Column
    Ididit 2401010010 2 Inch Floor Mount For Collapsible Column
    x
                

    This 2 inch floor mount is designed to mount a steering column to the floor or firewall.  Allows the floor/firewall to move independently of the column in the event of impact.  It can be installed on either side of the firewall.  Installation of this mount is required when utlizing an Ididit collapsible steering column

    • Floor Mount
    • Used in conjunction with 2" collapsible steering columns

     

  • 1923 T-Bucket Deluxe Steering Column Kit, Ford Mount, Polished Stainless
    1923 T-Bucket Deluxe Steering Column Kit, Ford Mount, Polished Stainless
    x
                These steering column kits are perfect for finishing off the steering   system in your '23 T-Bucket Kit car.  They come complete with the   steering column, the mount plate that bolts into our new bodies, and the   proper DD intermediate shafts and U-joints.  The steering column  features a 1-3/4" polished stainless steel tube, real ball bearings for   smooth shaft operation and a polished aluminum quick release hub that   will accept the common Grant steering wheel 3-bolt pattern. 15 gauge   mild steel. The 3/4" O.D. DD shaft has a 1.00" long "D" design on each   end. Made from 1018 steel, weld-on.
    • Includes column, mount plate, and DD intermediate shafts and U-joints
    • For our '23 T kits
    • Included U-Joints:
      • Full compliment bearings
      • Forged Vanadium steel yokes and u-joint
      • Highest quality for racing
      • Features needle bearing u-joints
      • 91032298 U-Joint: 3.875" L x 1.375" D
      • 91032291 U-joint: 5/8"-36 Spline

    Steering Column Instructions (PDF)

  • Ididit 1130280010 Tilt Wheel Steering Column w/ Shift, 28 Inch, Plain
    Ididit 1130280010 Tilt Wheel Steering Column w/ Shift, 28 Inch, Plain
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Plain steel finish

    Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1328D Instructions (PDF)

  • Ididit 1300300020 30 Inch Chrome Collapsable Tilt Steering Column
    Ididit 1300300020 30 Inch Chrome Collapsable Tilt Steering Column
    x
                The Ididit Collapsible Series columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit. Available in a chrome plated finish.
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Ididit 2401300010 Steering Column Band Swivel Lower Mount, 2 Inch
    Ididit 2401300010 Steering Column Band Swivel Lower Mount, 2 Inch
    x
                

    Mounting your steering column to the firewall or floor can be a real challenge. Ididit's steel band swivels are an easy and inexpensive solution.

    446-4030 Instructions (PDF)

  • Speedway Universal Steering Column Mount, 2-1/4 Inch
    Speedway Universal Steering Column Mount, 2-1/4 Inch
    x
                These versatile mounts install at any angle to solidly mount your steering column.
    • Available in 2.25" diameter
    • Choose from black or stainless steel
  • Standard GM 5-Position Tilt Steering Column, 32 Inch, Column Shift, Chrome
    Standard GM 5-Position Tilt Steering Column, 32 Inch, Column Shift, Chrome
    x
                These 5-position tilt columns are for those who want great  performance     at affordable pricing. Made from steel 2" tube. Standard 1"  DD  output    shaft. Column accepts any 1969-94 GM car steering wheel or    aftermarket   adapter.
    • Chrome plated finish
    • 32" length
    • Column shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard levers/knob

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • Ididit 1120320010 Tilt Wheel Steering Column, 32 Inch, Plain
    Ididit 1120320010 Tilt Wheel Steering Column, 32 Inch, Plain
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Plain steel finish

    Measures 32" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1232D Instructions (PDF)

  • Ididit 1120280020 Tilt Wheel Steering Column, 28 Inch, Chrome
    Ididit 1120280020 Tilt Wheel Steering Column, 28 Inch, Chrome
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome steel finish

    Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1228C Instructions (PDF)

  • Nostalgia 2 Inch Steering Column Drop, 1-1/2 Inch Hole w/ Shift
    Nostalgia 2 Inch Steering Column Drop, 1-1/2 Inch Hole w/ Shift
    x
                

    Beautifully polished cast aluminum steering column drop for early Ford steering columns (1-1/2" diameter tube) with column shift. Can be reworked to fit other makes of cars.

    Note: Column drop length shown is measured from the centerline of the column to the column drop mount surface.

  • Ididit 1120160010 Shorty Tilt Steering Column, 16 Inch, Plain
    Ididit 1120160010 Shorty Tilt Steering Column, 16 Inch, Plain
    x
                When space under the dash or around your feet is at a premium, these columns will save you a bunch of grief! These columns have the same dimensions and features as the other Ididit columns, but are about half the length.  

    The unpainted finish allows you to customize them in the color of your choice. The columns have the common 3/4" double "D" shaft and accept the '69-up GM steering wheels, adaptors and wiring harnesses and also use the "Swinger" drops on this website.

    Use with the under dash mount listed, or design your own mount. Normal installation is two drops at the dash, attached to an adjustable under dash mount. U-joints, shaft and rod end bearings to be determined by the builder.

  • Ididit 1130300010 Tilt Wheel Steering Column w/ Shift, 30 Inch, Plain
    Ididit 1130300010 Tilt Wheel Steering Column w/ Shift, 30 Inch, Plain
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Plain steel finish

    Measures 30" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1330D Instructions (PDF)

  • Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 2-1/2 Inch Drop
    Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 2-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 2-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Ididit 1250320010 32 In Collapsible RH Drive Tilt Steering Column
    Ididit 1250320010 32 In Collapsible RH Drive Tilt Steering Column
    x
                
    For the dedicated hobbyist overseas, the Ididit Collapsible Series RH Drive floor shift tilt columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Right Hand Drive Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit.
    • RH Drive
    • Paintable steel
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Nostalgia 3-1/2 Inch Steering Column Drop, 1-1/2 Inch Hole w/ Shift
    Nostalgia 3-1/2 Inch Steering Column Drop, 1-1/2 Inch Hole w/ Shift
    x
                

    Beautifully polished cast aluminum steering column drop for early Ford steering columns (1-1/2" diameter tube) with column shift. Can be reworked to fit other makes of cars.

    Note: Column drop length shown is measured from the centerline of the column to the column drop mount surface.

  • Flaming River FR20001 1-3/4 Inch Tube Floor Shift Column, Plain Finish
    Flaming River FR20001 1-3/4 Inch Tube Floor Shift Column, Plain Finish
    x
                

    Don't you wish you had a little more room than that roadster column gives you? This 30" tilt column has a 1-3/4 " tube diameter so it can replace your existing column easily. It accepts the normal '69-'94 GM steering wheel adapters, 1" DD u-joints, as well as common GM turn signal connectors.

    • All new components (not from a junkyard)
    • Made of 304 grade stainless steel tubing
    • For use with floor shifters (no column shift provisions)
    • Includes Billet Dress Up Kit (tilt/turn signal levers and hazard knob)
    • GM wiring (4-1/4" connector)
    • Made in the USA

     

  • Nostalgia 3-1/2 Inch Steering Column Drop, 1-1/2 Inch Hole
    Nostalgia 3-1/2 Inch Steering Column Drop, 1-1/2 Inch Hole
    x
                

    Beautifully polished cast aluminum steering column drop for early Ford steering columns (1-1/2" diameter tube) without column shift. Can be reworked to fit other makes of cars.

    Note: Column drop length shown is measured from the centerline of the column to the column drop mount surface.

  • Ididit 2400800010 Adjustable Steering Column Floor Mount, 1-3/4 Inch
    Ididit 2400800010 Adjustable Steering Column Floor Mount, 1-3/4 Inch
    x
                

    This kit from Ididit offers security and a handsome appearance as well. Floor mount portion includes an adjustable mount with a polished aluminum trim ring with hardware. Then choose what color boot, part # 4462405-color you want and you have everything you need to complete the look. Black, Bone, Brown or Grey boots available. 

    1. Select (1) column mount diameter needed.
    2. Select (1) boot color needed, part # 4462405-color.
    446-2400 Instructions (PDF)
Goto Previous PagePrevious Page
1 2 3 4