Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop T-Bucket Steering At Speedway Motors

Let Speedway Motors "Steer" you in the right direction with the right steering components for your T-Bucket! From steering U-joints from Sweet Mfg. to the top steering columns and drop mounts from Ididit, we've got the best parts at the best prices around. Don't forget to add a Speedway Motors aluminum steering wheel for the feel behind the wheel that can't be duplicated.

"T-Bucket, Steering Column" Page 1 of 4

  • 1/4 Inch Quick Release Ball Lock Dowel Pin, Steel Body, 1-1/2 Inch Grip
    1/4 Inch Quick Release Ball Lock Dowel Pin, Steel Body, 1-1/2 Inch Grip
    x
                

    These quick-release push-button pins offer you the ultimate in quick-release fastening. They are made of high-grade steel and feature a gold iridited finish for durability. A steel quick release pin for any application. Choose 1-1/2" grip.

    Quick Release Ball Lock Dowel Pin

    • Steel Body
    • 1-1/2 Inch Grip
    • 1/4 Inch pin diameter
  • 3-Speed Indicator Lens for Housing
    3-Speed Indicator Lens for Housing
    x
                Clear plastic shift pattern indicator lenses for 3 speed automatic transmissions.
            
  • Sweet Mfg Chrome Steering U-Joint, 3/4 Inch DD to 3/4 Inch DD, Universal
    Sweet Mfg Chrome Steering U-Joint, 3/4 Inch DD to 3/4 Inch DD, Universal
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • 1.354" not including the screws (1.534" including), width on the u-joint.
    • 1.125" OD on the ends not including the nut (1.345" including the nut). 

    Steering U-Joints and Couplers Application Chart (GIF)

    Steering Box/Rack/Spline Chart (Link)

    Spline Size (Link)

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Universal Shift Indicator Housing, Chrome
    Universal Shift Indicator Housing, Chrome
    x
                Universal fit for many non-keyed columns.  Designed  as a replacement for Speedway Universal tilt columns. Works with 3 speed or overdrive lens and pointer. Not for use with  some steering columns.
            
  • Ididit 2401300010 Steering Column Band Swivel Lower Mount, 2 Inch
    Ididit 2401300010 Steering Column Band Swivel Lower Mount, 2 Inch
    x
                

    Mounting your steering column to the firewall or floor can be a real challenge. Ididit's steel band swivels are an easy and inexpensive solution.

    446-4030 Instructions (PDF)

  • Ididit 2400300010 Steering Column Band Swivel Lower Mount, 1-3/4 Inch
    Ididit 2400300010 Steering Column Band Swivel Lower Mount, 1-3/4 Inch
    x
                

    Mounting your steering column to the firewall or floor can be a real challenge. Ididit's steel band swivels are an easy and inexpensive solution.

    446-4030 Instructions (PDF)

  • Standard GM 5-Position Tilt Steering Column, 32 Inch Long, Chrome
    Standard GM 5-Position Tilt Steering Column, 32 Inch Long, Chrome
    x
                These 5-position tilt columns are for those who want great  performance   at affordable pricing. Made from steel 2" tube. Standard 1"  DD output   shaft. Column accepts any 1969-94 GM car steering wheel or  aftermarket   adapter.
    • Chrome plated finish
    • 32" length
    • Floor shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard levers/knob

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • Nostalgia Steel Steering Column
    From: $89.99
    Product Rating: 4.76 Stars
    Nostalgia Steel Steering Column
    x
                

    We now have an affordable steel version of our famous hot rod steering column. The 1-3/4" black painted column still has a quick release steel hub that accepts the common 3-bolt Grant steering wheel pattern and uses common 3/4" DD u-joints. 15 gauge mild steel.

    910-32311 Instructions (PDF)

  • Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 2-1/2 Inch Drop
    Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 2-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two hex screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 2-1/2 Inch drop
    • 2-7/8" mount hole spacing
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Hot Rod Nostalgia Steering Column, 30 Inch, Plain Stainless Steel
    Hot Rod Nostalgia Steering Column, 30 Inch, Plain Stainless Steel
    x
                Our original Hot Rod Steering Column has been a huge success, but many rodders said they wanted one with a turn signal.

    The Nostalgia Columns offer a similar vintage look but have modern GM-style turn signal, hazard light and horn functions built into the attractive bell-shaped upper housings.

    Perfect for a wide variety of 1920's through 1950's era rods, as well as Cobras and other kit cars.

    The columns measure 30" long and have 3/4"-36 spline lower shafts. They're available with paintable stainless steel housings.
    • 30" long
    • Beautiful Art-Deco styling
    • Paintable Stainless steel
    • Turn signal, hazard light and horn functions
  • Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 3-1/2 Inch Drop
    Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 3-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two hex screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 3-1/2 Inch drop
    • 2-7/8" mount hole spacing
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

  • Flaming River FR20001 1-3/4 Inch Tube Floor Shift Column, Plain Finish
    Flaming River FR20001 1-3/4 Inch Tube Floor Shift Column, Plain Finish
    x
                

    Don't you wish you had a little more room than that roadster column gives you? This 30" tilt column has a 1-3/4 " tube diameter so it can replace your existing column easily. It accepts the normal '69-'94 GM steering wheel adapters, 1" DD u-joints, as well as common GM turn signal connectors.

    • All new components (not from a junkyard)
    • Made of 304 grade stainless steel tubing
    • For use with floor shifters (no column shift provisions)
    • Includes Billet Dress Up Kit (tilt/turn signal levers and hazard knob)
    • GM wiring (4-1/4" connector)
    • Made in the USA

     

  • Standard GM 5-Position Tilt Steering Column, 33 Inch Long, Chrome
    Standard GM 5-Position Tilt Steering Column, 33 Inch Long, Chrome
    x
                These 5-position tilt columns are for those who want great  performance    at affordable pricing. Made from steel 2" tube. Standard 1"  DD output    shaft. Column accepts any 1969-94 GM car steering wheel or   aftermarket   adapter.
    • Chrome plated finish
    • 33" length
    • Floor shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard levers/knob

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • Standard GM 5-Position Tilt Steering Column, 30 Inch Long, Plain
    Standard GM 5-Position Tilt Steering Column, 30 Inch Long, Plain
    x
                These 5-position tilt columns are for those who want great  performance  at affordable pricing. Made from steel 2" tube. Standard 1"  DD output  shaft. Column accepts any 1969-94 GM car steering wheel or  aftermarket  adapter.
    • Plain steel finish
    • 30" length
    • Floor shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard levers/knob

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • Standard GM 5-Position Tilt Steering Column, 30 Inch, Column Shift, Chrome
    Standard GM 5-Position Tilt Steering Column, 30 Inch, Column Shift, Chrome
    x
                These 5-position tilt columns are for those who want great  performance     at affordable pricing. Made from steel 2" tube. Standard 1"  DD  output    shaft. Column accepts any 1969-94 GM car steering wheel or    aftermarket   adapter.
    • Chrome plated finish
    • 30" length
    • Column shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard levers/knob

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • Ididit 1120160010 Shorty Tilt Steering Column, 16 Inch, Plain
    Ididit 1120160010 Shorty Tilt Steering Column, 16 Inch, Plain
    x
                When space under the dash or around your feet is at a premium, these columns will save you a bunch of grief! These columns have the same dimensions and features as the other Ididit columns, but are about half the length.  

    The unpainted finish allows you to customize them in the color of your choice. The columns have the common 3/4" double "D" shaft and accept the '69-up GM steering wheels, adaptors and wiring harnesses and also use the "Swinger" drops on this website.

    Use with the under dash mount listed, or design your own mount. Normal installation is two drops at the dash, attached to an adjustable under dash mount. U-joints, shaft and rod end bearings to be determined by the builder.

  • Ididit 2400800010 Adjustable Steering Column Floor Mount, 1-3/4 Inch
    Ididit 2400800010 Adjustable Steering Column Floor Mount, 1-3/4 Inch
    x
                

    This kit from Ididit offers security and a handsome appearance as well. Floor mount portion includes an adjustable mount with a polished aluminum trim ring with hardware. Then choose what color boot, part # 4462405-color you want and you have everything you need to complete the look. Black, Bone, Brown or Grey boots available. 

    1. Select (1) column mount diameter needed.
    2. Select (1) boot color needed, part # 4462405-color.
    446-2400 Instructions (PDF)
  • Standard GM 5-Position Tilt Steering Column, 33 Inch, Column Shift, Chrome
    Standard GM 5-Position Tilt Steering Column, 33 Inch, Column Shift, Chrome
    x
                These 5-position tilt columns are for those who want great  performance     at affordable pricing. Made from steel 2" tube. Standard 1"  DD  output    shaft. Column accepts any 1969-94 GM car steering wheel or    aftermarket   adapter.
    • Chrome plated finish
    • 33" length
    • Column shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard levers/knob

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • Standard GM 5-Position Tilt Steering Column, 30 Inch, Column Shift, Plain
    Standard GM 5-Position Tilt Steering Column, 30 Inch, Column Shift, Plain
    x
                These 5-position tilt columns are for those who want great  performance    at affordable pricing. Made from steel 2" tube. Standard 1"  DD output    shaft. Column accepts any 1969-94 GM car steering wheel or   aftermarket   adapter.
    • Plain steel finish
    • 30" length
    • Column shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard levers/knob

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • Ididit 2402300010 Steering Column Band Swivel Lower Mount, 2-1/4 Inch
    Ididit 2402300010 Steering Column Band Swivel Lower Mount, 2-1/4 Inch
    x
                

    Mounting your steering column to the firewall or floor can be a real challenge. Ididit's steel band swivels are an easy and inexpensive solution.

    446-4030 Instructions (PDF)

  • Speedway Hot Rod Steering Columns
    From: $129.99
    Product Rating: 5.00 Stars
    Speedway Hot Rod Steering Columns
    x
                

    These steering column features a 1-3/4" polished stainless steel tube, real ball bearings for smooth shaft operation and a polished aluminum quick release hub that will accept the common Grant steering wheel 3-bolt pattern. It just doesn't get any cooler than this!

    Uses the common 3/4" DD shaft and U-joints. Not for use with steering wheel centered horn button.

    910-32310 Instructions (PDF) 

    Note: If using a 446-4050 ball swivel mount, slight modification to the O.D. of the column end or I.D. of the swivel mount may be necessary due to a .001"-.005” variation between manufacturers. 

  • Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome
    Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 32" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1232C Instructions (PDF)

  • Ididit 2402500040 Steering Column Ball Swivel Lower Mount, 2-1/4 Inch
    Ididit 2402500040 Steering Column Ball Swivel Lower Mount, 2-1/4 Inch
    x
                

    Mounting your steering column to the firewall or floor can be a real challenge. Ididit's billet aluminum ball swivel style mounts make this task much easier.

    Note: This mount may require slight modification to the I.D. of the ball or O.D. of the column end due to variation between manufacturers. It is not for chrome columns.

    446-4250 Instructions (PDF)

  • Ididit 1250280010 28 In Pln Floor Shift Collapsible RH Drive Tilt Steering Column
    Ididit 1250280010 28 In Pln Floor Shift Collapsible RH Drive Tilt Steering Column
    x
                For the dedicated hobbyist overseas, the Ididit Collapsible Series RH Drive floor shift tilt columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Right Hand Drive Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit. Available in paintable steel.
    • RH Drive
    • Paintable steel
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Ididit 1120300010 Tilt Wheel Steering Column, 30 Inch, Plain
    Ididit 1120300010 Tilt Wheel Steering Column, 30 Inch, Plain
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Plain steel finish

    Measures 30" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1230D Instructions (PDF)

  • 55 Degree Steering Column Mount for T-Bucket Kit
    55 Degree Steering Column Mount for T-Bucket Kit
    x
                
    These mounts are the economical mounting solution for T-bucket steering columns.  They are designed to be used in conjunction with our 1-3/4" diameter stainless or plain steel hot rod steering columns.
    • Mount puts the steering column at a 55 degree angle to the firewall
    • Fits all of our deluxe "T" bodies with the floor / firewall installed
    • Designed to be used with a 1-3/4" diameter steering column
  • Ididit 1120280010 Tilt Wheel Steering Column, 28 Inch, Plain
    Ididit 1120280010 Tilt Wheel Steering Column, 28 Inch, Plain
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Plain steel finish

    Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1228D Instructions (PDF)

  • 1923 T-Bucket Deluxe Steering Column Kit, Chevy Mount, Polished Stainless
    1923 T-Bucket Deluxe Steering Column Kit, Chevy Mount, Polished Stainless
    x
                These steering column kits are perfect for finishing off the steering  system in your '23 T-Bucket Kit car.  They come complete with the  steering column, the mount plate that bolts into our new bodies, and the  proper DD intermediate shafts and U-joints.  The steering column features a 1-3/4" polished stainless steel tube, real ball bearings for  smooth shaft operation and a polished aluminum quick release hub that  will accept the common Grant steering wheel 3-bolt pattern. 15 gauge  mild steel. The 3/4" O.D. DD shaft has a 1.00" long "D" design on each  end. Made from 1018 steel, weld-on.
    • Includes column, mount plate, and DD intermediate shafts and U-joints
    • For our '23 T kits
    • Included U-Joints:
      • Full compliment bearings
      • Forged Vanadium steel yokes and u-joint
      • Highest quality for racing
      • Features needle bearing u-joints
      • 91032298 U-Joint: 3.875" L x 1.375" D
      • 91032291 U-joint: 5/8"-36 Spline

    Steering Column Instructions (PDF)

  • Lokar DUK-2200 Steering Column Dress-Up Kit, Brushed Aluminum
    Lokar DUK-2200 Steering Column Dress-Up Kit, Brushed Aluminum
    x
                

    3-piece Seamless Steering Column Dress-Up Kit. Unique one-piece solid billet aluminum design. Kit includes Turn Signal Lever, Tilt Steering Lever and Emergency Flasher Knob. Kit fits all GM, 1969 through 1976 Chrysler, and all aftermarket columns with single screw design.

    • No steel and chrome combinations.
    • Appearance is smooth and sleek. 
    • Adds class and style to any column.
  • Nostalgia 2 Inch Steering Column Drop, 1-1/2 Inch Hole
    Nostalgia 2 Inch Steering Column Drop, 1-1/2 Inch Hole
    x
                

    Beautifully polished cast aluminum steering column drop for early Ford steering columns (1-1/2" diameter tube) with column shift. Can be reworked to fit other makes of cars.

    Note: Column drop length shown is measured from the centerline of the column to the column drop mount surface.

  • Ididit 1130330020 Tilt Wheel Steering Column w/ Shift, 33 Inch, Chrome
    Ididit 1130330020 Tilt Wheel Steering Column w/ Shift, 33 Inch, Chrome
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 33" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1333C Instructions (PDF)

  • Speedway Universal Steering Column Mount, 2 Inch
    Speedway Universal Steering Column Mount, 2 Inch
    x
                These versatile mounts install at any angle to solidly mount your steering column.
    • Available in 2" diameter
    • Choose from black or stainless steel
  • Ididit 1130280020 Tilt Wheel Steering Column w/ Shift, 28 Inch, Chrome
    Ididit 1130280020 Tilt Wheel Steering Column w/ Shift, 28 Inch, Chrome
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1328C Instructions (PDF)

  • Ididit 1300280010 28 Inch Plain Floor Shift Collapsible Tilt Steering Column
    Ididit 1300280010 28 Inch Plain Floor Shift Collapsible Tilt Steering Column
    x
                
    The Ididit Collapsible Series columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit.
    • Paintable steel
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Ididit 1300320020 32 Inch Chrome Floor Shift Collapsable Tilt Steering Column
    Ididit 1300320020 32 Inch Chrome Floor Shift Collapsable Tilt Steering Column
    x
                The Ididit Collapsible Series columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit. Available a chrome plated finish.
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 5-1/2 Inch Drop
    Speedway Steering Column Drop Mount, 1-3/4 Inch Hole, 5-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two hex screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 5-1/2 Inch drop
    • 2-7/8" mount hole spacing
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

  • Tribute T Steering Column Kit
    $299.99
    Product Rating: 5.00 Stars
    Tribute T Steering Column Kit
    x
                Please view the product's page for more information
            
  • Lokar DUK-2201 Steering Column Dress-Up Kit, Polished Aluminum
    Lokar DUK-2201 Steering Column Dress-Up Kit, Polished Aluminum
    x
                

    3-piece Seamless Steering Column Dress-Up Kit. Unique one-piece solid billet aluminum design. Kit includes Turn Signal Lever, Tilt Steering Lever and Emergency Flasher Knob. Kit fits all GM, 1969 through 1976 Chrysler, and all aftermarket columns with single screw design.

    • No steel and chrome combinations.
    • Appearance is smooth and sleek. 
    • Adds class and style to any column.
  • Flaming River FR20001SS 1-3/4 Inch Tilt Floor Shift Column, Stainless
    Flaming River FR20001SS 1-3/4 Inch Tilt Floor Shift Column, Stainless
    x
                

    Don't you wish you had a little more room than that roadster column gives you? This 30" tilt column has a 1-3/4 " tube diameter so it can replace your existing column easily. It accepts the normal '69-'94 GM steering wheel adapters, 1" DD u-joints, as well as common GM turn signal connectors.

    • All new components (not from a junkyard)
    • Made of 304 grade stainless steel tubing
    • For use with floor shifters (no column shift provisions)
    • Includes Billet Dress Up Kit (tilt/turn signal levers and hazard knob)
    • GM wiring (4-1/4" connector)
    • Made in the USA

     

  • Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 3-1/2 Inch Drop
    Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 3-1/2 Inch Drop
    x
                

    These billet polished aluminum column drops fit Speedway Nostalgia columns, Hot Rod columns, our stainless steel columns, or your custom 1-3/4" O.D. column. Mount hole spacing is 2-7/8". For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through.  A hinge at the upper end allows multiple choices of mounting angles.

    • 1-3/4 Inch diameter hole
    • 3-1/2 Inch drop
    • Mount hole spacing is 2-7/8".
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included

    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

     

Goto Previous PagePrevious Page
1 2 3 4