Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop T-Bucket Steering At Speedway Motors

Let Speedway Motors "Steer" you in the right direction with the right steering components for your T-Bucket! From steering U-joints from Sweet Mfg. to the top steering columns and drop mounts from Ididit, we've got the best parts at the best prices around. Don't forget to add a Speedway Motors aluminum steering wheel for the feel behind the wheel that can't be duplicated.

"T-Bucket, Steering Box and Components" Page 1 of 2

  • Flaming River FR1541 Reversed Corvair Steering Box
    Flaming River FR1541 Reversed Corvair Steering Box
    x
                

    If you have tried to find a good used Corvair steering box, you know that the chances of finding a good one are slim to none. Don't bother! These brand new Corvair steering boxes have already been reversed. Designed for use on traditional steering cars and T-buckets, these boxes are constructed of modern high strength steel and needle bearings to ensure durability, which original boxes just can't offer. 

    Painted black. Does NOT include pitman arm. Ratio is 20:1.  

    Parallel Steering Set-Up Guide (GIF)

  • Vega Steering Box Mount for Ford Model T - 1934 Frames
    Vega Steering Box Mount for Ford Model T - 1934 Frames
    x
                Weld-on steering box mount. For cross steering. 
            
  • Speedway Corvair Pitman Arm
    From: $49.99
    Product Rating: 4.50 Stars
    Speedway Corvair Pitman Arm
    x
                

    This is our forged 'new design' Corvair pitman arm. It measures approximately 7" end to end, approximately 5-3/8" from the center of the big hole to the center of the small hole. The arm has a side-to-side offset approximately 1-7/8". The small hole fits an early Ford tie rod end (such as our 910-02909) and it is half tapered from both sides so that the drag link can be mounted from either side.


     

     

  • Vega Pitman Arm - Tapered for Tie Rod
    From: $49.99
    Product Rating: 5.00 Stars
    Vega Pitman Arm - Tapered for Tie Rod
    x
                These all new reproduction pitman arms feature a non-offset design, a double tapered "Ford" tie rod end hole (lets you attach the drag link on the top or on the bottom), and comes in gleaming stainless steel or plain steel. Perfect for a repro Vega steering box. 
            
  • Speedway Vega Cross Steering Box
    Speedway Vega Cross Steering Box
    x
                

    The Vega Manual Steering Box is the foundation of a cross steering system, which is the most popular steering system for modern Hot Rods. These boxes are compact, durable and are getting more scarce every day. 

    This unit bolts up to all normal Vega-type brackets and accepts Vega-spline u-joints, pitman arms and accessories. Durable cast iron and machined steel construction will give years of high-mileage service.

    • New castings and components
    • Faithful reproduction of size, shape and mounting hole locations
    • No core charge

    Cross Steering Guide (GIF)

    Note:  Vega steering box is not adjusted at the factory and therefore, it is necessary that the steering box be adjusted upon installation per the instructions as provided on the PDF instruction sheet.

    910-32204 Instructions (PDF)

  • Vega Steering Box Mount for 1935-41 Ford Frame
    Vega Steering Box Mount for 1935-41 Ford Frame
    x
                Vega steering box mount moves steering close to frame for header clearance. 1935-41 Ford. Bolt-in.
            
  • Vega Pitman Arm - Drilled for 5/8 Bolt
    Vega Pitman Arm - Drilled for 5/8 Bolt
    x
                These are all new reproduction pitman arms featuring a non-offset design and 5/8" diameter hole to be used in conjunction with a 5/8" spherical rod end. Comes in gleaming stainless steel or plain steel finish. Perfect for a repro Vega steering box.
            
  • Flaming River FR1541C Chrome Reversed Corvair Steering Box
    Flaming River FR1541C Chrome Reversed Corvair Steering Box
    x
                

    If you are building or updating a T-bucket that has a reversed Corvair steering box, a little chrome may be in order. These beautifully chromed works of art function just as good as they look. Both units feature a strong cast steel case, needle bearings, and precision gears with a 20:1 ratio.

    • All new components - not rebuilt
    • Manufactured from steel for improved strength
    • All NEW sealed needle bearing design
    • Longer life and less vibration vs. stock-style units
    • 20:1 steering ratio
    • 5/8"-36 spline input shaft

     

  • Flaming River FR1541TEC Chrome Tech-T Reversed Corvair Steering Box
    Flaming River FR1541TEC Chrome Tech-T Reversed Corvair Steering Box
    x
                

    If you are building or updating a T-bucket that has a reversed Corvair steering box, a little chrome may be in order. These beautifully chromed works of art function just as good as they look. Both units feature a strong cast steel case, needle bearings, and precision gears with a 20:1 ratio.

    • All new components - not rebuilt
    • Manufactured from steel for improved strength
    • All NEW sealed needle bearing design
    • Longer life and less vibration vs. stock-style units
    • 20:1 steering ratio
    • 5/8"-36 spline input shaft

     

  • Flaming River FR1500TC Chrome Tech-V Vega Steering Box
    Flaming River FR1500TC Chrome Tech-V Vega Steering Box
    x
                

    If you are building or updating a hot rod that has a Vega steering box, a little chrome may be in order. These beautifully chromed works of art are all new and function just as good as they look. All units feature a strong steel case, precision 20:1 ratio gears, and roller needle bearings which far outlast the original OEM-style bushing design of the 70's.

    • 30% Stronger worm & nut than OEM unit
    • 30% Stronger sector than OEM unit
    • Stronger pressure casting (Not sand cast)
    • Sealed needle bearing design
    • Bigger gears

    Vega Cross Steering Guide (GIF)

  • 2 Inch Offset Vega Pitman Arm for Nova Gasser
    2 Inch Offset Vega Pitman Arm for Nova Gasser
    x
                These steel pitman arms measure 5-3/4" between centers with a 2 inch drop. They fit Saginaw Vega 140 style steering box and work with Vega cross-steering applications and Nova gasser style set-ups.
    • Steel pitman arm
    • 5-3/4" between centers with a 2" drop
    • Fits Saginaw Vega 140 style steering box
    • Vega cross-steering applications
  • Flaming River FR1500C Chrome Vega Steering Box
    Flaming River FR1500C Chrome Vega Steering Box
    x
                

    If you are building or updating a hot rod that has a Vega steering box, a little chrome may be in order. These beautifully chromed works of art are all new and function just as good as they look. All units feature a strong steel case, precision 20:1 ratio gears, and roller needle bearings which far outlast the original OEM-style bushing design of the 70's.

    • 30% Stronger worm & nut than OEM unit
    • 30% Stronger sector than OEM unit
    • Stronger pressure casting (Not sand cast)
    • Sealed needle bearing design
    • Bigger gears

    Vega Cross Steering Guide (GIF)

  • Speedway Chrome Vega Cross Steering Box
    Speedway Chrome Vega Cross Steering Box
    x
                

    Our chrome Vega steering box bolts up to all normal Vega-type brackets and accepts Vega spline U-joints, pitman arms, and accessories.

    • Durable cast iron and machined steel construction
    • Givse years of high-mileage service
    • Faithful reproduction of size, shape and mounting hole locations
    • No core charge

     

  • Reversed Corvair Steering Gear Box
    New
    Reversed Corvair Steering Gear Box
    x
                

    If you have tried to find a good used Corvair steering box, you know that the chances of finding a good one are slim to none. Don't bother! These brand new Corvair steering boxes have already been reversed. Designed for use on traditional steering cars and T-buckets, these boxes are constructed of modern high strength steel and needle bearings to ensure durability, which original boxes just can't offer. 

     Parallel Steering Set-Up Guide (GIF)

  • Weld-On Corvair Steering Box Mount, 2 Inch Tall
    Weld-On Corvair Steering Box Mount, 2 Inch Tall
    x
                
    This universal steel bracket is designed to mount reversed Corvair steering boxes onto a variety of chassis using "traditional" style Ford steering. Works well with T-Buckets. Bracket measures 2" tall from the top of the frame to the steering box mounting surface.
    • Heavy gauge steel construction
    • Stylish lightening holes lend competition feel
    • Works with Corvair steering boxes
    • Welding required
    • Steering Box NOT Included
  • Steer Clear Steering Box Drop, Brushed Finish
    Steer Clear Steering Box Drop, Brushed Finish
    x
                

    Finally, a solution to the age old steering column/pedals problem. This nifty box provides unlimited options for steering shaft clearance so a high performance engine and headers will fit. Allows you to safely reposition the steering column higher, giving you more room for your feet and pedals.

    • Chain driven action
    • Improved road feel versus typical U-joint setups
    • Mounts on the inside or outside of your firewall
    • Four reinforced through-holes assure a strong, secure installation
    • Uses common 3/4"-36 spline U-joints and couplers
    • 4-1/2" wide X 1-1/2" thick(less shafts) X 4" longer than offsets

    Available in 8", 10", 12", 14" or 16" offsets.

    2006 Best Engineered New Product at SEMA

  • Weld-On Corvair Steering Box Mount, 4 Inch Tall
    Weld-On Corvair Steering Box Mount, 4 Inch Tall
    x
                
    This universal steel bracket is designed to mount reversed Corvair steering boxes onto a variety of chassis using "traditional" style Ford steering. Works well with T-Buckets. Bracket measures 4" tall from the top of the frame to the steering box mounting surface.
    • Heavy gauge steel construction
    • Stylish lightening holes lend competition feel
    • Works with Corvair steering boxes
    • Welding required
    • Steering Box NOT Included

    Note: There is a tightening tolerance when installing this mount. All three bolts must be started (threaded partially) into the holes before final tightening/securing of application. If installed with only one bolt tightened at a time, mounting holes will not line up properly.

  • Steer Clear Steering Box Drop, Polished Finish
    Steer Clear Steering Box Drop, Polished Finish
    x
                

    Finally, a solution to the age old steering column/pedals problem. This nifty box provides unlimited options for steering shaft clearance so a high performance engine and headers will fit. Allows you to safely reposition the steering column higher, giving you more room for your feet and pedals.

    • Chain driven action
    • Improved road feel versus typical U-joint setups
    • Mounts on the inside or outside of your firewall
    • Four reinforced through-holes assure a strong, secure installation
    • Uses common 3/4"-36 spline U-joints and couplers

    Available in 8", 10", 12", 14" or 16" offsets.

    2006 Best Engineered New Product at SEMA

  • Garage Sale - Steer Clear Steering Box Drop, Brushed Finish, 10 Inch Drop
    Garage Sale
    Garage Sale - Steer Clear Steering Box Drop, Brushed Finish, 10 Inch Drop
    x
                Please view the product's page for more information
            
  • Garage Sale - GM 800 Steering Box Case
    $49.99
    $99.99
    Garage Sale
    Garage Sale - GM 800 Steering Box Case
    x
                

    This is garage sale priced because it is the case only.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 1955-1957 Chevy Manual Steering Pitman Arm
    Garage Sale
    Garage Sale - 1955-1957 Chevy Manual Steering Pitman Arm
    x
                

    This 1955-1957 Chevy passenger car pitman arm is a direct replacement for original manual steering box arms (GM part # 3719487). Can also be used with GM 500 series power steering conversion boxes. 

     

    This is garage sale priced because it has a hairline crack.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 1965-1991 GM 525 Manual Steering Box
    Garage Sale
    Garage Sale - 1965-1991 GM 525 Manual Steering Box
    x
                Please view the product's page for more information
            
  • Garage Sale - 1964-88 GM Power Steering Box, 3/4 Inch 30-Spline Input
    Garage Sale
    Garage Sale - 1964-88 GM Power Steering Box, 3/4 Inch 30-Spline Input
    x
                Please view the product's page for more information
            
  • Garage Sale - 1964-88 GM Power Steering Box, 3/4"-30 Spine Input
    Garage Sale
    Garage Sale - 1964-88 GM Power Steering Box, 3/4"-30 Spine Input
    x
                

    Remanufactured GM 800 Series power steering boxes have a 16:1 ratio and were used in midsize GM cars from 1964-1988. Painted black and include -6 AN fittings to make it easier to fabricate hoses if needed. Pitman arm not included. No core return is required.

    Note: Not compatible with OEM 45° flare fittings.

     

    This item is garage sale priced because ithas been installed.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Vega Pitman Arm - Tapered for Tie Rod
    Garage Sale
    Garage Sale - Vega Pitman Arm - Tapered for Tie Rod
    x
                Please view the product's page for more information
            
  • Garage Sale - 1978-1988 GM Metric Pitman Arm
    Garage Sale
    Garage Sale - 1978-1988 GM Metric Pitman Arm
    x
                

    This is garage sale priced because it is dirty from being test fitted.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

     

    We all know how hard it is to find GM pitman arms and they're a pain to take off. These 1978-1988 GM Metric pitman arms are used. We clean and inspect each one. 

  • Garage Sale - 1964-88 GM Power Steering Box, 3/4 Inch 30-Spline Input
    Garage Sale
    Garage Sale - 1964-88 GM Power Steering Box, 3/4 Inch 30-Spline Input
    x
                Please view the product's page for more information
            
  • Garage Sale - 1964-88 GM Power Steering Box, 3/4 Inch 30-Spline Input
    Garage Sale
    Garage Sale - 1964-88 GM Power Steering Box, 3/4 Inch 30-Spline Input
    x
                

    Remanufactured GM 800 Series power steering boxes have a 16:1 ratio and were used in midsize GM cars from 1964-1988. Painted black and include -6 AN fittings to make it easier to fabricate hoses if needed. Pitman arm not included. No core return is required.

    Note: Not compatible with OEM 45° flare fittings.

     

    This is garage sale priced because it has been used.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - Speedway Chrome Vega Cross Steering Box
    Garage Sale
    Garage Sale - Speedway Chrome Vega Cross Steering Box
    x
                Please view the product's page for more information
            
  • Garage Sale - Total Performance Corvair Seal
    Garage Sale
    Garage Sale - Total Performance Corvair Seal
    x
                

    Total Performance Corvair oil seal. Sold as each. 0.875" X 1.25" X 0.188"

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Steer Clear Steering Box Drop, Brushed Finish, 8 Inch Drop
    Garage Sale
    Garage Sale - Steer Clear Steering Box Drop, Brushed Finish, 8 Inch Drop
    x
                Please view the product's page for more information
            
  • Garage Sale - Tribute T Steering Box Mount
    Garage Sale
    Garage Sale - Tribute T Steering Box Mount
    x
                

    This steering box is garage sale priced becuase we now use a weld on box mount, this one is a bolt on.

       NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

    This is the same steering box mount that is used on the Speedway Tribute T.

  • Garage Sale - Speedway Vega Cross Steering Box
    Garage Sale
    Garage Sale - Speedway Vega Cross Steering Box
    x
                Please view the product's page for more information
            
  • Garage Sale - Vega Pitman Arm - Drilled For 5/8 Bolt, SS Finish
    Garage Sale
    Garage Sale - Vega Pitman Arm - Drilled For 5/8 Bolt, SS Finish
    x
                

    These are all new reproduction pitman arms featuring a non-offset design and 5/8" diameter hole to be used in conjunction with a 5/8" spherical rod end. Comes in gleaming stainless steel  finish. Perfect for a repro Vega steering box.

     

    This pitman arm is garage sale priced because it was ding and scratched in shipping. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

     

  • Garage Sale - Flaming River FR1500C Chrome Vega Steering Box
    Garage Sale
    Garage Sale - Flaming River FR1500C Chrome Vega Steering Box
    x
                Please view the product's page for more information
            
  • Garage Sale - Timken 060931VB Corvair Worm Seal
    Garage Sale
    Garage Sale - Timken 060931VB Corvair Worm Seal
    x
                

    Timken seal part number 060931VB for Corvair. Sold as each.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - 1964-88 GM Power Steering Box, 3/4 Inch 30-Spline Input
    Garage Sale
    Garage Sale - 1964-88 GM Power Steering Box, 3/4 Inch 30-Spline Input
    x
                

    This steering box is garage sale priced because it as been installed and returned.  This one will need to be properly adjusted prior to use. 

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

    Remanufactured GM 800 Series power steering boxes have a 16:1 ratio and were used in midsize GM cars from 1964-1988. Painted black and include -6 AN fittings to make it easier to fabricate hoses if needed. Pitman arm not included. No core return is required.

    Note: Not compatible with OEM 45° flare fittings.

  • Garage Sale - Sweet Mfg. 208-12250 1964-88 GM Power Steering Box, 12:1, .250 Valve
    Garage Sale
    Garage Sale - Sweet Mfg. 208-12250 1964-88 GM Power Steering Box, 12:1, .250 Valve
    x
                

    These Sweet 700 Series Sportsman power steering boxes have new quick ratio gear sets in them which significantly speeds up the steering. This steering box features new inner working components with a re-manufactured housing. Fits most 1964-1988 GM passenger cars.

    -6 AN hose fittings. 13/16" 36-spline input.

    When using a steering quickener, we recommend using a .185 valve steering box. Anything higher will be extremely hard to steer!

    IMCA Approved  

     

    This is garage sale priced because it has been used. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - 1978-88 GM Metric Pitman Arm
    Garage Sale
    Garage Sale - 1978-88 GM Metric Pitman Arm
    x
                

    This pitman arm is garage sale priced because it has been installed and returned. 

      NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

    We all know how hard it is to find GM pitman arms and they're a pain to take off. These 1978-1988 GM Metric pitman arms are used. We clean and inspect each one. 

  • Garage Sale - Steer Clear Steering Box Drop, Polished Finish, 12 Inch
    Garage Sale
    Garage Sale - Steer Clear Steering Box Drop, Polished Finish, 12 Inch
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2