Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Let Speedway Motors "Steer" you in the right direction with the right steering components for your T-Bucket! From steering U-joints from Sweet Mfg. to the top steering columns and drop mounts from Ididit, we've got the best parts at the best prices around. Don't forget to add a Speedway Motors aluminum steering wheel for the feel behind the wheel that can't be duplicated.

"T-Bucket, Steering Arms" Page 1 of 1

  • Hoop Style Steering Arm, Ford Spindle
    Hoop Style Steering Arm, Ford Spindle
    x
                

    Hoop style steering arm features boss for 7° tapered tie rod end, but can be drilled for 5/8" rod end. Available for 1937-48 Ford car spindle  applications.

    Steering Arm End Chart (GIF)

  • 1937-48 Ford Steering Arms, 3-3/4 Inch Drop
    1937-48 Ford Steering Arms, 3-3/4 Inch Drop
    x
                

    These forged steel steering arms will attach to all 1937-48 Ford spindles but their greater drop, 3-3/4" from spindle mount holes means they work best on 1935-48 Ford cars (with spring-over front axle). Clears most radius rods and wishbones. These steering arms accept 11/16" Ford 7 degree "tapered" tie rod ends (both the top and bottom are tapered to allow tie rods to mount above or below arm as needed). You can drill-through with a 5/8" bit to use spherical rod ends.

    Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.

    Steering Arm Ends Guide (GIF)

    Cross Steering Guide (GIF)

  • Chevy Flat Plate Steering Arms, Plain
    Chevy Flat Plate Steering Arms, Plain
    x
                

    For cross steering when using 1949-54 Chevy spindles. These flat plate arms have 5/8" holes for spherical rod end use only.

    Note:  Uses a 45.5" eye to eye tie rod link when used with a 48" wide axle / Chevy spindle.

    Steering Arm Ends Guide (GIF)

    Cross Steering Guide (GIF)

  • 1937-48 Ford Steering Arms, 1-3/4 Inch Drop
    1937-48 Ford Steering Arms, 1-3/4 Inch Drop
    x
                

    These 1-3/4" drop forged steel steering arms are popular on Model T - 1934 Fords with 4" dropped axles and four-bar or hairpin radius rod suspensions. Will attach to '37-'48 Ford spindles and accept 11/16" Ford "tapered" tie rod ends (both the top and bottom are tapered to allow tie rods to mount above or below arm as needed). You can drill-through with a 5/8" bit to use spherical rod ends.

    Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.

     Steering Arm Ends Guide (GIF)

     Cross Steering Guide (GIF)

  • Pitman Arm Self Locking Nut, Corvair Steering Box
    Pitman Arm Self Locking Nut, Corvair Steering Box
    x
                
            
  • Ford Upper Steering Arm, Plain, 6-1/4 Inch, Tapered
    Ford Upper Steering Arm, Plain, 6-1/4 Inch, Tapered
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). This design is available in 6-1/4" or 7-3/4" lengths. The longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. Tapered end accepts 11/16" tie rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Ford Upper Steering Arm, Plain, 7-3/4 Inch, Tapered
    Ford Upper Steering Arm, Plain, 7-3/4 Inch, Tapered
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). This design is available in 6-1/4" or 7-3/4" lengths. The longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. Tapered end accepts 11/16" tie rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Ford Upper Steering Arm, Plain, 7-3/4 Inch, 5/8 Hole
    Ford Upper Steering Arm, Plain, 7-3/4 Inch, 5/8 Hole
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). These longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. 5/8" end accepts spherical rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Garage Sale - Ford Dog Leg Upper Steering Arm, Chrome, Tapered
    Garage Sale
    Garage Sale - Ford Dog Leg Upper Steering Arm, Chrome, Tapered
    x
                Please view the product's page for more information
            
  • Ford Dog Leg Upper Steering Arm, Chrome, 5/8 Hole
    Ford Dog Leg Upper Steering Arm, Chrome, 5/8 Hole
    x
                
    • Provides clearance for 90° grease zerk at upper kingpin boss of stock Ford spindles
    • 3-3/8" spindle mount centers
    • Fits '37-'48 Ford applications
    • 5/8" end accepts spherical rod end 
    • 6-1/4" long from center of hole to spindle mount surface

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Garage Sale - Upper Steering Arm for 1937-48 Ford Spindles, Zinc Plated with 5/8 Inch Bolt
    Garage Sale
    Garage Sale - Upper Steering Arm for 1937-48 Ford Spindles, Zinc Plated with 5/8 Inch Bolt
    x
                

    Early Ford Flame cut Design are 6-1/4".

    Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle.
    The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    These zinc plated arms are designed to have a 5/8" bolt run through the arm.

    These arms are garage sale clearance items because we have discontinued them from our current product line.

    No Warranty, No Returns on Garage Sale items.

  • 2 Inch Offset Vega Pitman Steering Arm, Drilled for 5/8 Inch Bolt, Zinc Finish
    New
    2 Inch Offset Vega Pitman Steering Arm, Drilled for 5/8 Inch Bolt, Zinc Finish
    x
                These steel replacement Vega pitman steering arms have a 2 inch  offset/drop and work ideally with Saginaw  Vega 140 style steering box.  They have a zinc finish and are durable  enough to hold up on your stock  or custom application. 
    • Steel pitman arm
    • Drilled for 5/8" bolt
    • 5-3/4" Between centers with a 2" drop
    • Fits Saginaw Vega 140 style steering box
    • Vega cross-steering applications
  • Ford Upper Steering Arm, Chrome, 6-1/4 Inch, Tapered
    Ford Upper Steering Arm, Chrome, 6-1/4 Inch, Tapered
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). This design is available in 6-1/4" or 7-3/4" lengths. The longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. Tapered end accepts 11/16" tie rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Ford Upper Steering Arm, Chrome, 6-1/4 Inch, 5/8 Hole
    Ford Upper Steering Arm, Chrome, 6-1/4 Inch, 5/8 Hole
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). This design is available in 6-1/4" or 7-3/4" lengths. The longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. 5/8" end accepts spherical rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Ford Flat Plate Steering Arms, Chrome
    Ford Flat Plate Steering Arms, Chrome
    x
                

    For cross steering when using 1937-48 Ford spindles. These have 5/8" hole for spherical rod end use only.

    Note: Uses a 47" eye to eye tie rod link when used with a 48" wide axle / Ford spindle.

    Steering Arm Ends Guide (GIF)

    Cross Steering Guide (GIF)

  • Garage Sale - Total Performance Slide Arm Bracket
    Garage Sale
    Garage Sale - Total Performance Slide Arm Bracket
    x
                

    Mild steel slide arm bracket from Total Performance. Includes two pins.  

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Ford Flat Tie Rod Steering Arms, Chrome
    Ford Flat Tie Rod Steering Arms, Chrome
    x
                

    Fits 1937-48 Ford style spindles. The arms attach with bolts through the lower 2 backing-plate-mounting holes on spindle. Ford arms use a 48" eye to eye tie rod link when used with a 48" wide axle / Ford spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Hoop Style Steering Arm, Chevy Spindle
    Hoop Style Steering Arm, Chevy Spindle
    x
                

    Hoop style steering arm features boss for 7° tapered tie rod end, but can be drilled for 5/8" rod end. Fits 1949-54 Chevy car spindle applications. Measures 6-1/4" from center of hole to spindle mounting surface (where it is cut down for threads).

    Steering Arm End Chart (GIF)

  • 2 Inch Offset Vega Pitman Steering Arm, Tapered for Tie Rod, Polished Stainless
    New
    2 Inch Offset Vega Pitman Steering Arm, Tapered for Tie Rod, Polished Stainless
    x
                These steel replacement Vega pitman steering arms have a 2 inch  offset/drop and work ideally with Saginaw  Vega 140 style steering box.  They have a polished stainless steel finish and are durable  enough to hold up on your stock  or custom application. 
    • Steel pitman arm
    • Tapered for tie rod end
    • 5-3/4" Between centers with a 2" drop
    • Fits Saginaw Vega 140 style steering box
    • Vega cross-steering applications
  • Ford Lower Tie Rod Steering Arms, Chrome, Tapered
    Ford Lower Tie Rod Steering Arms, Chrome, Tapered
    x
                

    These 1937-1948 Ford lower tie rod steering arms are sold in pairs. Arms should only be used with a straight axle application and NOT a dropped tube axle. They will not clear a dropped axle. Has 3-3/8" eye-to-eye centers on mount bolt holes.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Ford Lower Tie Rod Steering Arms, Plain, Tapered
    Ford Lower Tie Rod Steering Arms, Plain, Tapered
    x
                

    These 1937-1948 Ford lower tie rod steering arms are sold in pairs. Arms should only be used with a straight axle application and NOT a dropped tube axle. They will not clear a dropped axle. Has 3-3/8" eye-to-eye centers on mount bolt holes.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Garage Sale - Total Performance Cast Steel Steering Arms
    Garage Sale
    Garage Sale - Total Performance Cast Steel Steering Arms
    x
                

    Total Performance cast steel steering arms. Comes in a pair. 

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Ford Lower Tie Rod Steering Arms, Chrome, 5/8-18 Hole
    Ford Lower Tie Rod Steering Arms, Chrome, 5/8-18 Hole
    x
                

    These 1937-1948 Ford lower tie rod steering arms are sold in pairs. Arms should only be used with a straight axle application and NOT a dropped tube axle. They will not clear a dropped axle. Has 3-3/8" eye-to-eye centers on mount bolt holes.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • 2 Inch Offset Vega Pitman Steering Arm, Tapered for Tie Rod, Zinc Finish
    New
    2 Inch Offset Vega Pitman Steering Arm, Tapered for Tie Rod, Zinc Finish
    x
                These steel replacement Vega pitman steering arms have a 2 inch offset/drop and work ideally with Saginaw  Vega 140 style steering box. They have a zinc finish and are durable  enough to hold up on your stock or custom application. 
    • Steel pitman arm
    • Tapered for tie rod end
    • 5-3/4" Between centers with a 2" drop
    • Fits Saginaw Vega 140 style steering box
    • Vega cross-steering applications
  • Chevy Flat Tie Rod Steering Arms, Chrome
    Chevy Flat Tie Rod Steering Arms, Chrome
    x
                For 1949-54 Chevy passenger car spindles. The arms attach with bolts through the lower 2 backing plate mounting holes (3-1/8" center-to-center) on spindle. The distance between the mounting holes to the center of the tie rod hole is 6 inches. 

    Note: Chevy arms use a 46" eye to eye tie rod link when used with a 48" wide axle / Chevy spindle. 

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Garage Sale - Total Performance Steering Arm
    Garage Sale
    Garage Sale - Total Performance Steering Arm
    x
                

    Steer V style steering arm from Total Performance. The two holes on one end are for 7/16" hardware and have a 3-1/8" center to center measurement. The single hole is for 1/2" hardware. Arm is 6-1/4" in total length and 4-1/4" in total width. 

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Ford Upper Steering Arm, Plain, 6-1/4 Inch, 5/8 Hole
    Ford Upper Steering Arm, Plain, 6-1/4 Inch, 5/8 Hole
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). This design is available in 6-1/4" or 7-3/4" lengths. The longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. 5/8" end accepts spherical rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Chevy Flat Plate Steering Arms, Chrome
    Chevy Flat Plate Steering Arms, Chrome
    x
                

    For cross steering when using 1949-54 Chevy spindles. These flat plate arms have 5/8" holes for spherical rod end use only.

    Note:  Uses a 45.5" eye to eye tie rod link when used with a 48" wide axle / Chevy spindle.

    Steering Arm Ends Guide (GIF)

    Cross Steering Guide (GIF)

  • Garage Sale - Chrome Straight Ford Gasser Upper Steering Arms
    Garage Sale
    Garage Sale - Chrome Straight Ford Gasser Upper Steering Arms
    x
                

    These beautifully chrome plate upper steering arms are designed for a gasser style front end. They are flat so they will not work with our Speedway kits. 

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - 1937-48 Ford Upper Steering Arm - Chrome
    Garage Sale
    Garage Sale - 1937-48 Ford Upper Steering Arm - Chrome
    x
                

    Early Ford flame cut design are 6-1/4". Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle. These chrome arms are designed to have a 5/8" bolt run through the arm.  For 1937-48 Ford spindles.

     

    Clearance item!!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Chevy Flat Upper Steering Arm, Chrome
    Chevy Flat Upper Steering Arm, Chrome
    x
                Perfect for that traditional steering car. 6-1/2" long and drilled for a 5/8" rod end. Center to center measurement of the mounting holes is 3.125".  These have .475" mounting holes.

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Ford Dog Leg Upper Steering Arm, Plain, Tapered
    Ford Dog Leg Upper Steering Arm, Plain, Tapered
    x
                
    • Provides clearance for 90° grease zerk at upper kingpin boss of stock Ford spindles
    • Can be re-formed
    • 3-3/8" spindle mount centers
    • Fits '37-'48 Ford applications
    • Tapered end accepts 11/16" tie rod end
    • 6-1/4" long from center of hole to spindle mount surface

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)