Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 18

Products

Radiators

Shop T-Bucket Cooling At Speedway Motors

Speedway Motors wants to make sure your T-Bucket stays as cool as it looks! Our T-Bucket aluminum radiators and short water pumps will keep the temperature down while you cruise the town. Top it off with a polished radiator cap, dog bone cap, winged radiator cap, cooling fan, and fan shroud. Give your T-Bucket a vintage look with a Model T motor meter and Model T filler neck. Speedway also offers all the radiator hoses, pulley spacers, and support brackets needed to complete the job.

Featured Products
  • Universal Aluminum Radiator - 27 Inch Tall, Passenger Side Outlet
    Universal Aluminum Radiator - 27 Inch Tall, Passenger Side Outlet
    (Part #9175159)
    x
                

    These downflow aluminum radiators are for you guys that are building something a little different. They work great in many '30s, '40s & '50s medium width nose vehicles (be sure to measure before you order).

    • Built-in 7-plate automatic transmission cooler
    • Centered filler neck w/ hose nipple
    • 2 rows of 1" tubes
    • Trans Cooler ports:  1/2"-20 inverted flare

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.

  • 1917-1923 T-Bucket Aluminum Radiator
    From: $229.99
    Product Rating: 4.63 Stars
    1917-1923 T-Bucket Aluminum Radiator
    (Part #91015600)
    x
                

    These 1917-1923 T-Bucket radiators are built to work without a grille shell and look good doing it! Speedway T-bucket radiators do not use a conventional "pressure" radiator cap, rather they use the decorative "T" caps to seal the neck at the top of the radiator. A hidden pop-off valve (sold separately) is used for pressure control. Gasket # 91112222 is very helpful for sealing the decorative "T" caps.

    Features Chevy position outlets, auto transmission cooler, and approx. 1 gallon capacity. These accept "T" radiator caps and accessories, but are not included.

    1. The upper neck is left of center about 6".
    2. 4" upper tank thickness, 3" strap thicknes that encases the core, 2.25" core
    3. Uses 2 each 1" wide core tube
    4. Choose from buffed or polished

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.

     

  • Universal Aluminum Radiator, 26 Inch Tall, Passenger Side Outlet
    Universal Aluminum Radiator, 26 Inch Tall, Passenger Side Outlet
    (Part #9175161)
    x
                

    These downflow aluminum radiators are for you guys that are building something a little different. They work great in many '30s & '40s narrow nose vehicles (be sure to measure before you order).

    • Built-in 7-plate automatic transmission cooler
    • NO filler neck - must use inline hose filler
    • 2 rows of 1" tubes 

    Measurements are overall:

    • 16" wide
    • 26" tall
    • 2-1/4" thick
    • Core Width:  15"
    • Core Height:  21-1/4"
    • Top neck (inlet) is 1-1/2"
    • Lower neck (outlet) is 1-3/4"
    • Trans Cooler ports are 1/8" NPT

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.

  • Universal Aluminum Radiator - 27 Inch Tall, Driver Side Outlet
    Universal Aluminum Radiator - 27 Inch Tall, Driver Side Outlet
    (Part #9175160)
    x
                

    These downflow aluminum radiators are for you guys that are building something a little different. They work great in many '30s, '40s & '50s medium width nose vehicles (be sure to measure before you order).

    • Built-in 7-plate automatic transmission cooler
    • Centered filler neck w/ hose nipple
    • 2 rows of 1" tubes 

    Measurements are overall: 

    • 19-3/4" wide
    • 27" tall to the top of the tank
    • 28" tall overall (from the bottom to the top of the filler neck)
    • 2-1/4" thick
    • Top neck is 1-1/2" O.D.
    • Lower neck is 1-3/4" O.D.
    • Trans Cooler ports:  5/16" inverted flare
    • Core measures 18” wide x 22-1/4” tall

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.

  • Universal Aluminum Radiator - 26 Inch Tall, Driver Side Outlet
    Universal Aluminum Radiator - 26 Inch Tall, Driver Side Outlet
    (Part #9175163)
    x
                

    These downflow aluminum radiators are for you guys that are building something a little different. They work great in many '30s & '40s narrow nose vehicles (be sure to measure before you order).

    • Built-in 7-plate automatic transmission cooler
    • NO filler neck - must use inline hose filler
    • 2 rows of 1" tubes 

    Measurements are overall:

    • 16" wide
    • 26" tall
    • 2-1/4" thick
    • Core Width:  15"
    • Core Height:  21-1/4"
    • Top neck (inlet) is 1-1/2"
    • Lower neck (outlet) is 1-3/4"
    • Trans Cooler ports are 1/8" NPT

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.

  • Walker C-481-2 Cobra 1924-1927 Ford Model T Radiator for Chevy Engine
    Walker C-481-2 Cobra 1924-1927 Ford Model T Radiator for Chevy Engine
    (Part #820C4812)
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Chrome dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Ford Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Walker Z-481-1 Z-Series 1917-23 Ford Model T Radiator for Chevy Engine
    Walker Z-481-1 Z-Series 1917-23 Ford Model T Radiator for Chevy Engine
    (Part #820Z4811)
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Chrome dummy filler neck in OEM location - accepts stock type caps & accessories
    • Works with original, reproduction, steel or fiberglass grille shells
    • 4-row copper core w/ brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock

    Ford Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  


  • Walker C-481-1 Cobra 1917-1923 Ford Model T Radiator for Chevy Engine
    Walker C-481-1 Cobra 1917-1923 Ford Model T Radiator for Chevy Engine
    (Part #820C4811)
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Chrome dummy filler neck in OEM location - accepts stock caps & accessories 
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Ford Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

     

Filter

"T-Bucket, Radiators" Page 1 of 18

Page 1 of 18

  • Garage Sale - Walker BZ-489-1 Z-Series 1942-52 Ford F100 Radiator for Ford Engine
    Garage Sale
    Garage Sale - Walker BZ-489-1 Z-Series 1942-52 Ford F100 Radiator for Ford Engine
    (Part #UP9675)
    x
                Please view the product's page for more information
            
  • Garage Sale - AFCO Aluminum Radiator 1933-34 Ford Car
    Garage Sale
    Garage Sale - AFCO Aluminum Radiator 1933-34 Ford Car
    (Part #UP8291)
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    These radiators can cruise the fairgrounds with a high horsepower Big Block in the heat of the summer. No problem.

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age

    This Radiator is Garage Sale priced because it has some shipping damage.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • AFCO 1923 T-Bucket Aluminum Radiator, Chevy Engine
    AFCO 1923 T-Bucket Aluminum Radiator, Chevy Engine
    (Part #10680167)
    x
                Please view the product's page for more information
            
  • Garage Sale - AFCO 1942-48 Ford Aluminum Radiator, Ford Engine
    Garage Sale
    Garage Sale - AFCO 1942-48 Ford Aluminum Radiator, Ford Engine
    (Part #UP24635)
    x
                Please view the product's page for more information
            
  • Garage Sale - AFCO 80131FN Ford Radiator w/Heat Exchanger, 28-1/2 Inch
    Garage Sale
    Garage Sale - AFCO 80131FN Ford Radiator w/Heat Exchanger, 28-1/2 Inch
    (Part #AUP691)
    x
                Please view the product's page for more information
            
  • U-Weld-It Custom Aluminum Radiator Kit, 26 x 19 Inch
    U-Weld-It Custom Aluminum Radiator Kit, 26 x 19 Inch
    (Part #910601)
    x
                
    Build and design your own radiator with these aluminum u-weld-it kits.  They come with everything you need to create a custom radiator to fit your specific application.  These radiators can be used as either a cross-flow or down-flow.
    • Overall Dimensions:  25-5/8" x 19-9/16" x 3-1/8"
    • Core Dimensions:  21" x 18" x 2-1/4"

    Kit Includes:

    • (1) 1-1/2" Hose connection
    • (1) 1-3/4" Hose connection
    • (1) Billet Aluminum filler neck
    • (1) Overflow tube
    • (1) Weld-on Bung
    • (1) Draincock

    Note: This kit requires aluminum welding and fabrication.  Kit is sold as an unfinished product.  Standard warranties DO NOT APPLY.

  • Garage Sale - AFCO Custom Vertical Radiator, 21 X 17-7/8, Without Trans Cooler
    Garage Sale
    Garage Sale - AFCO Custom Vertical Radiator, 21 X 17-7/8, Without Trans Cooler
    (Part #AUP3678)
    x
                Please view the product's page for more information
            
  • Garage Sale - Walker Z-481-1 Z-Series 1917-23 Ford Model T Radiator for Chevy Engine
    Garage Sale
    Garage Sale - Walker Z-481-1 Z-Series 1917-23 Ford Model T Radiator for Chevy Engine
    (Part #UP52824)
    x
                Please view the product's page for more information
            
  • Garage Sale - AFCO Direct Fit 1960-78 Mopar A, B, E-Body Radiator, 22 X 22 Inch, Black
    Garage Sale
    Garage Sale - AFCO Direct Fit 1960-78 Mopar A, B, E-Body Radiator, 22 X 22 Inch, Black
    (Part #AUP2573)
    x
                Please view the product's page for more information
            
  • Garage Sale - 1949-53 Ford Aluminum Radiator, Ford Engine
    Garage Sale
    Garage Sale - 1949-53 Ford Aluminum Radiator, Ford Engine
    (Part #AUP1172)
    x
                Please view the product's page for more information
            
  • Garage Sale - AFCO 80103FNP Mopar B/C-Body Performance Aluminum Radiator - 17-1/2 X 25-3/4
    Garage Sale
    Garage Sale - AFCO 80103FNP Mopar B/C-Body Performance Aluminum Radiator - 17-1/2 X 25-3/4
    (Part #AUP2344)
    x
                

    With 2 rows of 1" cores, AFCO Performance Series Radiators are perfect for the street, the strip, or anything in between. These crossflow radiators feature 2" mounting flanges which can be easily adapted to many applications. They are 100% TIG welded, 100% pressure tested and use no epoxy or sealers.

    Instructions (PDF)

    NOT a direct fit - measure your application. May require some modifications and/or fabricating for proper fit.

    Fan/Shroud Assembly sold separately.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

     

    This radiator is garage sale priced because it is a custom size and it has some cosmetic blemishes.  This one does not have a drain built in to it. 

  • Garage Sale - 1917-23 T-Bucket Aluminum Polished Radiator
    Garage Sale
    Garage Sale - 1917-23 T-Bucket Aluminum Polished Radiator
    (Part #UP23162)
    x
                

    These 1917-1923 T-Bucket radiators are built to work without a grille shell and look good doing it! Speedway T-bucket radiators do not use a conventional "pressure" radiator cap, rather they use the decorative "T" caps to seal the neck at the top of the radiator. A hidden pop-off valve (sold separately) is used for pressure control. Gasket # 91112222 is very helpful for sealing the decorative "T" caps.

    Features Chevy position outlets, auto transmission cooler, and approx. 1 gallon capacity. These accept "T" radiator caps and accessories, but are not included.

    1. The upper neck is left of center about 6".
    2. Has a 3.875" upper tank thickness with a 3" core thickness.
    This radiator is garage sale priced because the filler neck was dented in to the top tank in shipping.  This one does have holes drilled in the mounting tabs.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
Goto Previous PagePrevious Page
1 2 3 4 5 ... 18