Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 8

Products

Manual Transmission

Shop T-Bucket Manual Transmission At Speedway Motors

Shift into high gear with manual transmission parts from Speedway Motors.  Featuring shifters, boots, and tons of unique shifting knobs.  And with a 98% in-stock rate and same day shipping, you can bet you'll get your roadster parts fast!

Featured Products
  • GM 700R4 Flexplate/Flywheel Dust Cover-Chrome
    GM 700R4 Flexplate/Flywheel Dust Cover-Chrome
    (Part #9109587)
    x
                

    These chrome-plated flexplate/flywheel covers are for 1982 and newer GM 700-R4, 4L60 and 4L60E automatic overdrive transmissions.  They are stock replacement torque converter inspection covers.

    • Chrome-plated steel
    • For 1982 and newer GM 700R4, 4L60 and 4L60E automatic overdrive transmissions
    • Stock replacement
  • Flathead V8 to Ford C4 Transmission Basic Adapter Kit
    Flathead V8 to Ford C4 Transmission Basic Adapter Kit
    (Part #91628901)
    x
                

    If you have access to your own transmission and parts or you wish to adapt an AOD, Ford C-4 or Ford C-6, this basic adapter set is what you need. Includes: starter nose cone, flexplate, bellhousing adapter and instructions. Choice of 157 or 164 flexplate. Use with 302-351W transmission. For Ford C4 and Ford C6 transmission application.

    916-28901 Instructions (pdf)

  • Replacement Pushrod for Manual Master Cylinder
    Replacement Pushrod for Manual Master Cylinder
    (Part #91631946)
    x
                

    This replacement pushrod for manual master cylinders fits our Dual Feed Master Cylinder 910-31420.

    • Overall Length:  6"
    • Threaded Length:  5-3/8"
    • Threads:  3/8" Fine

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Quick Time RM-6023PB Adapter Bellhousing for S/B Chevy to GM T-56 LS1
    New
    Quick Time RM-6023PB Adapter Bellhousing for S/B Chevy to GM T-56 LS1
    (Part #9106023)
    x
                

    This SFI certified 6.1  bellhousing fits your Small Block and Big Block Chevy to your T56 LS-1 Chevy transmission. Its high quality steel construction allows it to be light weight and still provide protection that you want!

    • Small Block Chevy
    • Big Block Chevy
    • 1992-96 LT1
    • SFI Certified 6.1
    • Includes full engine plate, pivot ball, and Grade 8 bolts

    Note: This housing eliminates the need for hydraulics. It uses Chevy push-style fork (not included).




  • Speedway Hot Rod Shifter Boots
    Speedway Hot Rod Shifter Boots
    (Part #91021801)
    x
                

    Each Speedway hot rod shifter boot kit includes a black vinyl boot, polished stainless base ring and stainless screws.

    Base ring has 4" inside diameter and 5" outside diameter.
       

  • ARP Fasteners 200-2802 Chevy Flywheel Bolts
    ARP Fasteners 200-2802 Chevy Flywheel Bolts
    (Part #1012002802)
    x
                

    Flywheel bolts play an important role in the performance and safety of race cars and street machines alike. That’s why the fastener experts at ARP develop special bolts that are far superior to OEM hardware. Forged from aerospace alloy and heat-treated prior to thread rolling and machining.

    Fits Chevrolet 90° V6 & 265-454 Chevy V8 with 2-pc rear seal. Set of 6 bolts.

    • Exclusive, flat, 12-point head design
    • Larger than stock shank diameter for increased strength and improved flywheel register
    • Originally developed for NASCAR Winston Cup competition
    • Has a 200,000 psi rating
  • Chevy Engine to Early Ford Transmission Adapter Kit
    Chevy Engine to Early Ford Transmission Adapter Kit
    (Part #7200392)
    x
                

    Small Block, Big Block Chevy and 90° V6 engine to Ford (1932-1948), Mercury (1939-1950), and Ford pick-up truck (1932-1952) transmission.

    Aluminum, 1 piece bellhousing with pilot bearing adaptor. 3-5/8" thick.

    Note: Use 168 tooth (large) Chevy flywheel redrilled to accept Ford clutch. Use old Ford release bearing and a Chevy 1955-1961 style 3 bolt "bellhousing-mount" starter from a manual transmission car.

    720-0392 Instructions (PDF)

  • ARP Fasteners 150-2201 Ford 289-460V8 Pressure Plate Bolt Kit
    ARP Fasteners 150-2201 Ford 289-460V8 Pressure Plate Bolt Kit
    (Part #1011502201)
    x
                

    The importance of pressure plate bolts in racing or hi-performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed a special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chromoly and hardened to a nominal tensile strength of 180,000 psi. 

     

    • Large diameter, low-profile design
    • 1/2" diameter head
    • .780" underhead length
    • Complete set with washers
    • Fits 1985 and earlier Ford 289-460

     

Filter

"T-Bucket, Manual Transmission" Page 1 of 8

Page 1 of 8

  • Flathead V8 to Ford C4 Transmission Basic Adapter Kit
    Flathead V8 to Ford C4 Transmission Basic Adapter Kit
    (Part #91628901)
    x
                

    If you have access to your own transmission and parts or you wish to adapt an AOD, Ford C-4 or Ford C-6, this basic adapter set is what you need. Includes: starter nose cone, flexplate, bellhousing adapter and instructions. Choice of 157 or 164 flexplate. Use with 302-351W transmission. For Ford C4 and Ford C6 transmission application.

    916-28901 Instructions (pdf)

  • Unpainted Shift Knob - Jet Fighter Norm
    Unpainted Shift Knob - Jet Fighter Norm
    (Part #910944)
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. Can be used as automatic shift knob or manual shift knob.
            
  • Lokar 70-BAF3 Deluxe Top Rect Shifter Boot w/ 5/8 Inch Sliding Bezel
    Lokar 70-BAF3 Deluxe Top Rect Shifter Boot w/ 5/8 Inch Sliding Bezel
    (Part #49170BAF3)
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot Rings Sold Separately
  • Unpainted Shift Knob - Helmet Skull
    Unpainted Shift Knob - Helmet Skull
    (Part #910945)
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. Can be used as automatic shift knob or manual shift knob.
            
  • Tremec GM TKO 5-Speed to 1949-53 Ford Flathead Engine Conversion Kit
    New
    Tremec GM TKO 5-Speed to 1949-53 Ford Flathead Engine Conversion Kit
    (Part #91028908)
    x
                Please view the product's page for more information
            
  • Ram Clutches 78125HD Heavy Duty Chevy Hydraulic Release Bearing Kit
    Ram Clutches 78125HD Heavy Duty Chevy Hydraulic Release Bearing Kit
    (Part #60578126)
    x
                

    These hydraulic clutch release bearings are offered in new HD versions to offer the upmost in durability and long life over factory hydraulic systems. Full adjustability means easy setup with any aftermarket clutch, single or dual disc.

    • Compressed Length: 1.75"
    • Travel: .70"
    • Inlet Fitting: -3 AN
    • Sold Individually

    Terms and Policy (PDF)

  • Lokar X70-BFR Midnight Series Billet Rectangular Shifter Boot Ring
    Lokar X70-BFR Midnight Series Billet Rectangular Shifter Boot Ring
    (Part #491X70BFR)
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, OR billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings also available in black anodized.
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
  • Lokar X70-BAF1 Black Alum Hi-Top Rect. Shifter Boot w/Bezel, 3/8 In-24
    Lokar X70-BAF1 Black Alum Hi-Top Rect. Shifter Boot w/Bezel, 3/8 In-24
    (Part #491X70BAF1)
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Accel 77-150 Lakewood Chevy Engine to GM Manual Trans Adapter Bellhousing
    Accel 77-150 Lakewood Chevy Engine to GM Manual Trans Adapter Bellhousing
    (Part #55077150)
    x
                

    This product connects Small Block and Big Block Chevy engines to transmissions using the GM standard pattern such as the Muncie, Saginaw, Borg Warner T10 and Tremec TKO transmissions. This bellhousing is designed to fit GM full and midsized vehicles from 1958-1987.

    • Excellent choice for Street Rods, Street Machines, or Trucks (where SFI bellhousing is not necessary)
    • Does not include or accept an engine block plate
    • Steel Construction
    • Hardware Included
    • Sold Individually

    Note:  This bellhousing is not S.F.I. certified which is required by many sanctioning bodies for cars running 11.49 or faster in the quarter mile.

     

  • Ram Clutches 1512-12 Lightweight Flywheel, 1986-Up Small Block Chevy
    New
    Ram Clutches 1512-12 Lightweight Flywheel, 1986-Up Small Block Chevy
    (Part #605151212)
    x
                

    Every billet flywheel from Ram Clutches is engineered from SFI certified material. These flywheels are digitally balanced to the proper factory specifications.

    • Lightweight
    • 153 tooth
    • External balance 12.1 lbs
    • 1986-Up Small Block Chevy
    • Steel Material
    • Made in the USA

    Terms and Policy (PDF)

  • Ram Clutches 1510-12 Steel Flywheel, Small/Big Block Chevy, 153-Tooth
    New
    Ram Clutches 1510-12 Steel Flywheel, Small/Big Block Chevy, 153-Tooth
    (Part #605151012)
    x
                

    This lightweight flywheel is for your early Small and Big Block Chevy using 10.5" solid or 'unsprung' clutch disk. These flywheels use segmented friction inserts that provide durability as well as resistance to warpage or distortion.

    • Steel Material
    • 12.1 pounds
    • Internal Engine Balance
    • Small and Big Block Chevy
    • 153-Tooth
    • Must be used with Ram flywheel bolts set # 605-530

    Terms and Policy (PDF)

  • Speedway Transmission Mount E-Brake Boots
    Speedway Transmission Mount E-Brake Boots
    (Part #91021803)
    x
                Each Speedway transmission mount emergency brake boot kit includes a black naugahyde boot, polished stainless base ring and stainless screws. 

    Base ring is 6-1/4" x 2-1/2" outside diameter and 5-1/4" x 1-1/2" inside diameter.
  • Quick Time RM-6070 Adapter Bellhousing, Mopar 318/360 to Muncie Trans
    Quick Time RM-6070 Adapter Bellhousing, Mopar 318/360 to Muncie Trans
    (Part #9106070)
    x
                

    These durable bellhousings are perfect for mating your custom built engine and transmission.  They are designed to fit small block Mopar engines to Muncie/Jerico style transmissions. They are built from high grade steel with over 80,000 PSI strength, which is over two times the strength of any other steel bellhousing.

    • Fits Engine: Mopar 318 / 360
    • Fits Transmission: Muncie / Richmond / Falcon / Bert / Jerico 4-5 speed / Brinn / Saginaw / Chevy TKO 500-600 / BW-T10
    • Transmission bore diameter: 4.685"
    • Flywheel: 130 tooth
    • Weight: 22lbs
    • Clutch: 10.5"
    • SFI: 6.1
    • Included hardware:
      • Fork bracket
      • Full engine plate and grade 8 bolts

    9106070 Mopar to Muncie Bellhousing Instructions (PDF)

  • ARP Fasteners 150-2201 Ford 289-460V8 Pressure Plate Bolt Kit
    ARP Fasteners 150-2201 Ford 289-460V8 Pressure Plate Bolt Kit
    (Part #1011502201)
    x
                

    The importance of pressure plate bolts in racing or hi-performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed a special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chromoly and hardened to a nominal tensile strength of 180,000 psi. 

     

    • Large diameter, low-profile design
    • 1/2" diameter head
    • .780" underhead length
    • Complete set with washers
    • Fits 1985 and earlier Ford 289-460

     

  • Lokar 70-BAF2 Hi-Top Rect Shifter Boot w/ 3/8 Inch - 16 Threaded Bezel
    Lokar 70-BAF2 Hi-Top Rect Shifter Boot w/ 3/8 Inch - 16 Threaded Bezel
    (Part #49170BAF2)
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Ram 98794T Powergrip 1986-00 Mustang 5.0L Clutch Set, 10.5 x 1-1/8-26
    Ram 98794T Powergrip 1986-00 Mustang 5.0L Clutch Set, 10.5 x 1-1/8-26
    (Part #60598794)
    x
                

    As engine power and torque levels increase, Powergrip Clutch sets are sure to meet the challenge. Powergrip utilizes a unique blend of 900 and 300 series friction materials and increased clamp loads to give you the holding power needed for aggressive street driving.

    • Muscle car performance clutch for up to 550 HP
    • Organic and metallic disc friction surfaces
    • 8-spring hub with Ram Polycoil damper springs to handle greater shock loads
    • Meets all SFI specifications
    • Smoot, comfortable driver control
    • Includes: pressure plate, disc, release bearing, alignment tool

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

Goto Previous PagePrevious Page
1 2 3 4 5 ... 8