Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop T-Bucket Manual Transmission At Speedway Motors

Shift into high gear with manual transmission parts from Speedway Motors.  Featuring shifters, boots, and tons of unique shifting knobs.  And with a 98% in-stock rate and same day shipping, you can bet you'll get your roadster parts fast!

"T-Bucket, Manual Transmission" Page 1 of 4

  • Big Block Chevy Balancing Plate
    Big Block Chevy Balancing Plate
    x
                

    Lets you balance your Big Block Chevy 454 engine with a 350 flywheel (manual transmission flywheel or automatic transmission flex plate) and a bolt-on balancing plate.

    • Allows use of lighter 350 flywheel to rev quicker
    • Fits between the crankshaft and flexplate
    • Correctly balances the engine without resorting to a big heavy flywheel
    • Precision stamped steel plate
    • Road and race tested

    Note: The weight welded to this plate is positioned to the block side of the plate.

  • ARP Fasteners 200-2802 Chevy Flywheel Bolts
    ARP Fasteners 200-2802 Chevy Flywheel Bolts
    x
                

    Flywheel bolts play an important role in the performance and safety of race cars and street machines alike. That’s why the fastener experts at ARP develop special bolts that are far superior to OEM hardware. Forged from aerospace alloy and heat-treated prior to thread rolling and machining.

    Fits Chevrolet 90° V6 & 265-454 Chevy V8 with 2-pc rear seal. Set of 6 bolts.

    • Exclusive, flat, 12-point head design
    • Larger than stock shank diameter for increased strength and improved flywheel register
    • Originally developed for NASCAR Winston Cup competition
    • Has a 200,000 psi rating
  • Replacement Pushrod for Manual Master Cylinder
    Replacement Pushrod for Manual Master Cylinder
    x
                

    This replacement pushrod for manual master cylinders fits our Dual Feed Master Cylinder 910-31420.

    • Overall Length:  6"
    • Threaded Length:  5-3/8"
    • Threads:  3/8" Fine

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • GM 700R4 Flexplate/Flywheel Dust Cover-Chrome
    GM 700R4 Flexplate/Flywheel Dust Cover-Chrome
    x
                

    These chrome-plated flexplate/flywheel covers are for 1982 and newer GM 700-R4, 4L60 and 4L60E automatic overdrive transmissions.  They are stock replacement torque converter inspection covers.

    • Chrome-plated steel
    • For 1982 and newer GM 700R4, 4L60 and 4L60E automatic overdrive transmissions
    • Stock replacement
  • Flathead V8 to Ford C4 Transmission Basic Adapter Kit
    Flathead V8 to Ford C4 Transmission Basic Adapter Kit
    x
                

    If you have access to your own transmission and parts or you wish to adapt an AOD, Ford C-4 or Ford C-6, this basic adapter set is what you need. Includes: starter nose cone, flexplate, bellhousing adapter and instructions. Choice of 157 or 164 flexplate. Use with 302-351W transmission. For Ford C4 and Ford C6 transmission application.

    916-28901 Instructions (pdf)

  • Lokar SK-6878 Shift Knob Adapter, 3/8-16 Thread
    Lokar SK-6878 Shift Knob Adapter, 3/8-16 Thread
    x
                This adapter allows you to use a shifter knob that has a 3/8"-16 thread. By pushing straight down on the knob, you can shift gears but retain the original safety features. 
            
  • Lokar SK-6879 Shifter Knob Adapter, 3/8-24 Thread
    Lokar SK-6879 Shifter Knob Adapter, 3/8-24 Thread
    x
                This adapter allows you to use a shifter knob that has a 3/8"-24 thread. By pushing straight down on the knob, you can shift gears but retain the original safety features. 
            
  • Speedway Hot Rod Shifter Boots
    Speedway Hot Rod Shifter Boots
    x
                

    Each Speedway hot rod shifter boot kit includes a black vinyl boot, polished stainless base ring and stainless screws.

    Base ring has 4" inside diameter and 5" outside diameter.
       

  • Unpainted Shift Knob - Jet Fighter Norm
    Unpainted Shift Knob - Jet Fighter Norm
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. Can be used as automatic shift knob or manual shift knob.
            
  • Lokar 70-BAF3 Deluxe Top Rect Shifter Boot w/ 5/8 Inch Sliding Bezel
    New
    Lokar 70-BAF3 Deluxe Top Rect Shifter Boot w/ 5/8 Inch Sliding Bezel
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot Rings Sold Separately
  • Unpainted Shift Knob - Helmet Skull
    Unpainted Shift Knob - Helmet Skull
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. Can be used as automatic shift knob or manual shift knob.
            
  • Lokar X70-BFR Midnight Series Billet Rectangular Shifter Boot Ring
    New
    Lokar X70-BFR Midnight Series Billet Rectangular Shifter Boot Ring
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, OR billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings also available in black anodized.
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
  • Lokar X70-BAF1 Black Alum Hi-Top Rect. Shifter Boot w/Bezel, 3/8 In-24
    New
    Lokar X70-BAF1 Black Alum Hi-Top Rect. Shifter Boot w/Bezel, 3/8 In-24
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Speedway Transmission Mount E-Brake Boots
    Speedway Transmission Mount E-Brake Boots
    x
                Each Speedway transmission mount emergency brake boot kit includes a black naugahyde boot, polished stainless base ring and stainless screws. 

    Base ring is 6-1/4" x 2-1/2" outside diameter and 5-1/4" x 1-1/2" inside diameter.
  • Quick Time RM-6070 Adapter Bellhousing, Mopar 318/360 to Muncie Trans
    Quick Time RM-6070 Adapter Bellhousing, Mopar 318/360 to Muncie Trans
    x
                

    These durable bellhousings are perfect for mating your custom built engine and transmission.  They are designed to fit small block Mopar engines to Muncie/Jerico style transmissions. They are built from high grade steel with over 80,000 PSI strength, which is over two times the strength of any other steel bellhousing.

    • Fits Engine: Mopar 318 / 360
    • Fits Transmission: Muncie / Richmond / Falcon / Bert / Jerico 4-5 speed / Brinn / Saginaw / Chevy TKO 500-600 / BW-T10
    • Transmission bore diameter: 4.685"
    • Flywheel: 130 tooth
    • Weight: 22lbs
    • Clutch: 10.5"
    • SFI: 6.1
    • Included hardware:
      • Fork bracket
      • Full engine plate and grade 8 bolts

    9106070 Mopar to Muncie Bellhousing Instructions (PDF)

  • ARP Fasteners 150-2201 Ford 289-460V8 Pressure Plate Bolt Kit
    ARP Fasteners 150-2201 Ford 289-460V8 Pressure Plate Bolt Kit
    x
                

    The importance of pressure plate bolts in racing or hi-performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed a special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chromoly and hardened to a nominal tensile strength of 180,000 psi. 

     

    • Large diameter, low-profile design
    • 1/2" diameter head
    • .780" underhead length
    • Complete set with washers
    • Fits 1985 and earlier Ford 289-460

     

  • Lokar 70-BAF2 Hi-Top Rect Shifter Boot w/ 3/8 Inch - 16 Threaded Bezel
    New
    Lokar 70-BAF2 Hi-Top Rect Shifter Boot w/ 3/8 Inch - 16 Threaded Bezel
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Ram 98794T Powergrip 1986-00 Mustang 5.0L Clutch Set, 10.5 x 1-1/8-26
    Ram 98794T Powergrip 1986-00 Mustang 5.0L Clutch Set, 10.5 x 1-1/8-26
    x
                

    As engine power and torque levels increase, Powergrip Clutch sets are sure to meet the challenge. Powergrip utilizes a unique blend of 900 and 300 series friction materials and increased clamp loads to give you the holding power needed for aggressive street driving.

    • Muscle car performance clutch for up to 550 HP
    • Organic and metallic disc friction surfaces
    • 8-spring hub with Ram Polycoil damper springs to handle greater shock loads
    • Meets all SFI specifications
    • Smoot, comfortable driver control
    • Includes: pressure plate, disc, release bearing, alignment tool

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Lokar 70-BAF1 Hi-Top Rect Shifter Boot w/ 3/8 Inch - 24 Threaded Bezel
    New
    Lokar 70-BAF1 Hi-Top Rect Shifter Boot w/ 3/8 Inch - 24 Threaded Bezel
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Lokar 70-CR2 Hi-Top Chrome Rnd. Shifter Boot, 3/8 Inch-16 Thread Bezel
    New
    Lokar 70-CR2 Hi-Top Chrome Rnd. Shifter Boot, 3/8 Inch-16 Thread Bezel
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Lokar 70-CBB1 Chrome Shifter Boot Bezel, 3/8 Inch - 24 Thread
    New
    Lokar 70-CBB1 Chrome Shifter Boot Bezel, 3/8 Inch - 24 Thread
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
  • Unpainted Shift Knob - Grenade
    Unpainted Shift Knob - Grenade
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. Can be used as automatic shift knob or manual shift knob.
            
  • Lokar 70-CF1 Hi-Top Rect Shifter Boot, 3/8 Inch-24 Thread Chrome Bezel
    New
    Lokar 70-CF1 Hi-Top Rect Shifter Boot, 3/8 Inch-24 Thread Chrome Bezel
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Lokar X70-BAF2 Black Alum Hi-Top Rect. Shifter Boot w/Bezel, 3/8 In-16
    New
    Lokar X70-BAF2 Black Alum Hi-Top Rect. Shifter Boot w/Bezel, 3/8 In-16
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Lokar X70-BFMB Billet Floor Mount Shifter Boot Ring w/Boot, Black
    Lokar X70-BFMB Billet Floor Mount Shifter Boot Ring w/Boot, Black
    x
                

    Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum ring features a black anodized finish.

    It also includes a foam rubber seal to eliminate air flow from the floor through the boot.  All boots hug the shifter lever and there are no unsightly pull ties or laces.

    • Black Naugahyde construction
    • Foam rubber seal to eliminate air flow from the floor through the boot
    • Includes:
      • boot
      • billet aluminum ring with ball-milled edge
      • stainless screws

    Boot Ring Dimension Chart (Link)

  • Lokar 70-BAR2 Hi-Top Round Shifter Boot w/ 3/8 Inch-16 Threaded Bezel
    New
    Lokar 70-BAR2 Hi-Top Round Shifter Boot w/ 3/8 Inch-16 Threaded Bezel
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Lokar 70-BAB3 Billet Aluminum Sliding Shifter Boot Bezel, 5/8 Inch
    New
    Lokar 70-BAB3 Billet Aluminum Sliding Shifter Boot Bezel, 5/8 Inch
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boots Available To Cover Entire Shift Lever
  • Lokar X70-BAB2 Black Billet Alum Shifter Boot Bezel, 3/8 In-16 Thread
    New
    Lokar X70-BAB2 Black Billet Alum Shifter Boot Bezel, 3/8 In-16 Thread
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boots Available To Cover Entire Shift Lever
  • Lokar X70-BSR Midnight Series Black Billet Round Shifter Boot Ring
    New
    Lokar X70-BSR Midnight Series Black Billet Round Shifter Boot Ring
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, OR billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings also available in black anodized.
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • The Hand Brake Boots are available in transmount or floor mount styles.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
  • Lokar X70-BAR3 Blk Deluxe Top Round Shifter Boot w/Sliding Alum Bezel
    New
    Lokar X70-BAR3 Blk Deluxe Top Round Shifter Boot w/Sliding Alum Bezel
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot Rings Sold Separately
  • Lokar X70-BHBF Billet Hand Brake Boot Ring w/Floor Mount Boot, Black
    Lokar X70-BHBF Billet Hand Brake Boot Ring w/Floor Mount Boot, Black
    x
                

    Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings are available in black anodized.

    Lokar's Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever. It also includes a foam rubber seal to eliminate air flow from the floor through the boot.  All boots hug the shifter lever and there are no unsightly pull ties or laces.

    • Black Naugahyde construction
    • Rings available in black anodized
    • Foam rubber seal to eliminate air flow from the floor through the boot
    • Includes:
      • boot
      • billet aluminum ring with ball-milled edge
      • stainless screws

    Boot Ring Dimension Chart (Link)

  • Lokar 70-HRB Hot Rod Shifter Boot w/ Stainless Ring
    Lokar 70-HRB Hot Rod Shifter Boot w/ Stainless Ring
    x
                Lokar shifter boots are black naugahyde and all sets  include a boot, polished stainless base ring, and stainless screws. Boot hugs the shifter lever and there are no unsightly pull ties or laces.
            
  • Lokar 70-BAB1 Billet Aluminum Shifter Boot Bezel, 3/8 Inch - 24 Thread
    New
    Lokar 70-BAB1 Billet Aluminum Shifter Boot Bezel, 3/8 Inch - 24 Thread
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boots Available To Cover Entire Shift Lever
  • Unpainted Shift Knob - Ed Roth
    Unpainted Shift Knob - Ed Roth
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. This can fit as a automatic shift knob or a manual shift knob.
            
  • Lokar X70-BHRB Midnight Series Billet Round Shifter Boot Ring w/Boot
    New
    Lokar X70-BHRB Midnight Series Billet Round Shifter Boot Ring w/Boot
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, OR billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings also available in black anodized.
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • The Hand Brake Boots are available in transmount or floor mount styles.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
  • Cast Resin Shift Knob - Top Fuel
    Cast Resin Shift Knob - Top Fuel
    x
                Row through those gears in style with this character shift knobs. 3/8" threaded insert. Fully painted. Can be used as an automatic shift knob or a manual shift knob.
            
Goto Previous PagePrevious Page
1 2 3 4