Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop T-Bucket Manual Transmission At Speedway Motors

Shift into high gear with manual transmission parts from Speedway Motors.  Featuring shifters, boots, and tons of unique shifting knobs.  And with a 98% in-stock rate and same day shipping, you can bet you'll get your roadster parts fast!

"T-Bucket, Manual Transmission" Page 1 of 4

  • Flathead V8 to Ford C4 Transmission Basic Adapter Kit
    Flathead V8 to Ford C4 Transmission Basic Adapter Kit
    SKU-91628901
    x
                

    If you have access to your own transmission and parts or you wish to adapt an AOD, Ford C-4 or Ford C-6, this basic adapter set is what you need. Includes: starter nose cone, flexplate, bellhousing adapter and instructions. Choice of 157 or 164 flexplate. Use with 302-351W transmission. For Ford C4 and Ford C6 transmission application.

    916-28901 Instructions (pdf)

  • Unpainted Shift Knob - Jet Fighter Norm
    Unpainted Shift Knob - Jet Fighter Norm
    SKU-910944
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. Can be used as automatic shift knob or manual shift knob.
            
  • Lokar 70-BAF3 Deluxe Top Rect Shifter Boot w/ 5/8 Inch Sliding Bezel
    Lokar 70-BAF3 Deluxe Top Rect Shifter Boot w/ 5/8 Inch Sliding Bezel
    SKU-49170BAF3
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot Rings Sold Separately
  • Unpainted Shift Knob - Helmet Skull
    Unpainted Shift Knob - Helmet Skull
    SKU-910945
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. Can be used as automatic shift knob or manual shift knob.
            
  • Tremec GM TKO 5-Speed to 1949-53 Ford Flathead Engine Conversion Kit
    New
    Tremec GM TKO 5-Speed to 1949-53 Ford Flathead Engine Conversion Kit
    SKU-91028908
    x
                Please view the product's page for more information
            
  • Ram Clutches 78125HD Heavy Duty Chevy Hydraulic Release Bearing Kit
    New
    Ram Clutches 78125HD Heavy Duty Chevy Hydraulic Release Bearing Kit
    SKU-60578126
    x
                

    These hydraulic clutch release bearings are offered in new HD versions to offer the upmost in durability and long life over factory hydraulic systems. Full adjustability means easy setup with any aftermarket clutch, single or dual disc.

    • Compressed Length: 1.75"
    • Travel: .70"
    • Inlet Fitting: -3 AN
    • Sold Individually
  • Lokar X70-BFR Midnight Series Billet Rectangular Shifter Boot Ring
    Lokar X70-BFR Midnight Series Billet Rectangular Shifter Boot Ring
    SKU-491X70BFR
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, OR billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings also available in black anodized.
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
  • Lokar X70-BAF1 Black Alum Hi-Top Rect. Shifter Boot w/Bezel, 3/8 In-24
    Lokar X70-BAF1 Black Alum Hi-Top Rect. Shifter Boot w/Bezel, 3/8 In-24
    SKU-491X70BAF1
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Accel 77-150 Lakewood Chevy Engine to GM Manual Trans Adapter Bellhousing
    New
    Accel 77-150 Lakewood Chevy Engine to GM Manual Trans Adapter Bellhousing
    SKU-55077150
    x
                

    This product connects Small Block and Big Block Chevy engines to transmissions using the GM standard pattern such as the Muncie, Saginaw, Borg Warner T10 and Tremec TKO transmissions. This bellhousing is designed to fit GM full and midsized vehicles from 1958-1987.

    • Excellent choice for Street Rods, Street Machines, or Trucks (where SFI bellhousing is not necessary)
    • Does not include or accept an engine block plate
    • Steel Construction
    • Hardware Included
    • Sold Individually

    Note:  This bellhousing is not S.F.I. certified which is required by many sanctioning bodies for cars running 11.49 or faster in the quarter mile.

     

  • Ram Clutches 1512-12 Lightweight Flywheel, 1986-Up Small Block Chevy
    New
    Ram Clutches 1512-12 Lightweight Flywheel, 1986-Up Small Block Chevy
    SKU-605151212
    x
                

    Every billet flywheel from Ram Clutches is engineered from SFI certified material. These flywheels are digitally balanced to the proper factory specifications.

    • Lightweight
    • 153 tooth
    • External balance 12.1 lbs
    • 1986-Up Small Block Chevy
    • Steel Material
    • Made in the USA
  • Ram Clutches 1510-12 Steel Flywheel, Small/Big Block Chevy, 153-Tooth
    New
    Ram Clutches 1510-12 Steel Flywheel, Small/Big Block Chevy, 153-Tooth
    SKU-605151012
    x
                

    This lightweight flywheel is for your early Small and Big Block Chevy using 10.5" solid or 'unsprung' clutch disk. These flywheels use segmented friction inserts that provide durability as well as resistance to warpage or distortion.

    • Steel Material
    • 12.1 pounds
    • Internal Engine Balance
    • Small and Big Block Chevy
    • 153-Tooth
    • Must be used with Ram flywheel bolts set # 605-530
  • Speedway Transmission Mount E-Brake Boots
    Speedway Transmission Mount E-Brake Boots
    SKU-91021803
    x
                Each Speedway transmission mount emergency brake boot kit includes a black naugahyde boot, polished stainless base ring and stainless screws. 

    Base ring is 6-1/4" x 2-1/2" outside diameter and 5-1/4" x 1-1/2" inside diameter.
  • Quick Time RM-6070 Adapter Bellhousing, Mopar 318/360 to Muncie Trans
    Quick Time RM-6070 Adapter Bellhousing, Mopar 318/360 to Muncie Trans
    SKU-9106070
    x
                

    These durable bellhousings are perfect for mating your custom built engine and transmission.  They are designed to fit small block Mopar engines to Muncie/Jerico style transmissions. They are built from high grade steel with over 80,000 PSI strength, which is over two times the strength of any other steel bellhousing.

    • Fits Engine: Mopar 318 / 360
    • Fits Transmission: Muncie / Richmond / Falcon / Bert / Jerico 4-5 speed / Brinn / Saginaw / Chevy TKO 500-600 / BW-T10
    • Transmission bore diameter: 4.685"
    • Flywheel: 130 tooth
    • Weight: 22lbs
    • Clutch: 10.5"
    • SFI: 6.1
    • Included hardware:
      • Fork bracket
      • Full engine plate and grade 8 bolts

    9106070 Mopar to Muncie Bellhousing Instructions (PDF)

  • ARP Fasteners 150-2201 Ford 289-460V8 Pressure Plate Bolt Kit
    ARP Fasteners 150-2201 Ford 289-460V8 Pressure Plate Bolt Kit
    SKU-1011502201
    x
                

    The importance of pressure plate bolts in racing or hi-performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed a special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chromoly and hardened to a nominal tensile strength of 180,000 psi. 

     

    • Large diameter, low-profile design
    • 1/2" diameter head
    • .780" underhead length
    • Complete set with washers
    • Fits 1985 and earlier Ford 289-460

     

  • Lokar 70-BAF2 Hi-Top Rect Shifter Boot w/ 3/8 Inch - 16 Threaded Bezel
    Lokar 70-BAF2 Hi-Top Rect Shifter Boot w/ 3/8 Inch - 16 Threaded Bezel
    SKU-49170BAF2
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Ram 98794T Powergrip 1986-00 Mustang 5.0L Clutch Set, 10.5 x 1-1/8-26
    Ram 98794T Powergrip 1986-00 Mustang 5.0L Clutch Set, 10.5 x 1-1/8-26
    SKU-60598794
    x
                

    As engine power and torque levels increase, Powergrip Clutch sets are sure to meet the challenge. Powergrip utilizes a unique blend of 900 and 300 series friction materials and increased clamp loads to give you the holding power needed for aggressive street driving.

    • Muscle car performance clutch for up to 550 HP
    • Organic and metallic disc friction surfaces
    • 8-spring hub with Ram Polycoil damper springs to handle greater shock loads
    • Meets all SFI specifications
    • Smoot, comfortable driver control
    • Includes: pressure plate, disc, release bearing, alignment tool

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Lokar 70-BAF1 Hi-Top Rect Shifter Boot w/ 3/8 Inch - 24 Threaded Bezel
    Lokar 70-BAF1 Hi-Top Rect Shifter Boot w/ 3/8 Inch - 24 Threaded Bezel
    SKU-49170BAF1
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Lokar 70-CR2 Hi-Top Chrome Rnd. Shifter Boot, 3/8 Inch-16 Thread Bezel
    Lokar 70-CR2 Hi-Top Chrome Rnd. Shifter Boot, 3/8 Inch-16 Thread Bezel
    SKU-49170CR2
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Lokar 70-CBB1 Chrome Shifter Boot Bezel, 3/8 Inch - 24 Thread
    Lokar 70-CBB1 Chrome Shifter Boot Bezel, 3/8 Inch - 24 Thread
    SKU-49170CBB1
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
  • Unpainted Shift Knob - Grenade
    Unpainted Shift Knob - Grenade
    SKU-910943
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. Can be used as automatic shift knob or manual shift knob.
            
  • Lokar 70-CF1 Hi-Top Rect Shifter Boot, 3/8 Inch-24 Thread Chrome Bezel
    Lokar 70-CF1 Hi-Top Rect Shifter Boot, 3/8 Inch-24 Thread Chrome Bezel
    SKU-49170CF1
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Lokar X70-BAF2 Black Alum Hi-Top Rect. Shifter Boot w/Bezel, 3/8 In-16
    Lokar X70-BAF2 Black Alum Hi-Top Rect. Shifter Boot w/Bezel, 3/8 In-16
    SKU-491X70BAF2
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Hurst Shifters 5384106 Shifter Stick, T-5/T-56 Transmission, 10 Inch
    New
    Hurst Shifters 5384106 Shifter Stick, T-5/T-56 Transmission, 10 Inch
    SKU-4404106
    x
                These Hurst  bolt-on shifter sticks are perfect for use where a particular height or  offset is required. Constructed from high  strength steel, these are stamped with the Hurst name. All sticks  incorporate a 3/8" - 16 thread size.
    • Classic Hurst look
    • Designed to fit any Hurst shifter utilizing a two-bolt design
    • Chrome plated
  • Lokar SK-6879 Shifter Knob Adapter, 3/8-24 Thread
    Lokar SK-6879 Shifter Knob Adapter, 3/8-24 Thread
    SKU-4916879
    x
                This adapter allows you to use a shifter knob that has a 3/8"-24 thread. By pushing straight down on the knob, you can shift gears but retain the original safety features. 
            
  • Replacement Pilot Bushing, Chevy Engine to Ford Trans
    Replacement Pilot Bushing, Chevy Engine to Ford Trans
    SKU-7205000
    x
                

    Replacement pilot bushing for use with adapter 720-0392 for Chevy V8/V6 engines to Ford (1932-1948), Mercury (1939-1950), and Ford pick-up truck (1932-1952) transmissions.

    • Adapts Ford transmission to Chevy crankshaft
    • 1.093" O.D.
    • .671" I.D.
    • 1.45" long
  • Lokar X70-BFMB Billet Floor Mount Shifter Boot Ring w/Boot, Black
    Lokar X70-BFMB Billet Floor Mount Shifter Boot Ring w/Boot, Black
    SKU-49107071
    x
                

    Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum ring features a black anodized finish.

    It also includes a foam rubber seal to eliminate air flow from the floor through the boot.  All boots hug the shifter lever and there are no unsightly pull ties or laces.

    • Black Naugahyde construction
    • Foam rubber seal to eliminate air flow from the floor through the boot
    • Includes:
      • boot
      • billet aluminum ring with ball-milled edge
      • stainless screws

    Boot Ring Dimension Chart (Link)

  • Lokar 70-BAR2 Hi-Top Round Shifter Boot w/ 3/8 Inch-16 Threaded Bezel
    Lokar 70-BAR2 Hi-Top Round Shifter Boot w/ 3/8 Inch-16 Threaded Bezel
    SKU-49170BAR2
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Lokar 70-BAB3 Billet Aluminum Sliding Shifter Boot Bezel, 5/8 Inch
    Lokar 70-BAB3 Billet Aluminum Sliding Shifter Boot Bezel, 5/8 Inch
    SKU-49170BAB3
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boots Available To Cover Entire Shift Lever
  • Lokar X70-BAB2 Black Billet Alum Shifter Boot Bezel, 3/8 In-16 Thread
    Lokar X70-BAB2 Black Billet Alum Shifter Boot Bezel, 3/8 In-16 Thread
    SKU-491X70BAB2
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boots Available To Cover Entire Shift Lever
  • Lokar X70-BSR Midnight Series Black Billet Round Shifter Boot Ring
    Lokar X70-BSR Midnight Series Black Billet Round Shifter Boot Ring
    SKU-491X70BSR
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, OR billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings also available in black anodized.
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • The Hand Brake Boots are available in transmount or floor mount styles.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
  • Lokar X70-BAR3 Blk Deluxe Top Round Shifter Boot w/Sliding Alum Bezel
    Lokar X70-BAR3 Blk Deluxe Top Round Shifter Boot w/Sliding Alum Bezel
    SKU-491X70BAR3
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot Rings Sold Separately
  • Lokar X70-BHBF Billet Hand Brake Boot Ring w/Floor Mount Boot, Black
    Lokar X70-BHBF Billet Hand Brake Boot Ring w/Floor Mount Boot, Black
    SKU-49107072
    x
                

    Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings are available in black anodized.

    Lokar's Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever. It also includes a foam rubber seal to eliminate air flow from the floor through the boot.  All boots hug the shifter lever and there are no unsightly pull ties or laces.

    • Black Naugahyde construction
    • Rings available in black anodized
    • Foam rubber seal to eliminate air flow from the floor through the boot
    • Includes:
      • boot
      • billet aluminum ring with ball-milled edge
      • stainless screws

    Boot Ring Dimension Chart (Link)

  • Lokar 70-HRB Hot Rod Shifter Boot w/ Stainless Ring
    Lokar 70-HRB Hot Rod Shifter Boot w/ Stainless Ring
    SKU-4917001
    x
                Lokar shifter boots are black naugahyde and all sets  include a boot, polished stainless base ring, and stainless screws. Boot hugs the shifter lever and there are no unsightly pull ties or laces.
            
  • Lokar 70-BAB1 Billet Aluminum Shifter Boot Bezel, 3/8 Inch - 24 Thread
    Lokar 70-BAB1 Billet Aluminum Shifter Boot Bezel, 3/8 Inch - 24 Thread
    SKU-49170BAB1
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boots Available To Cover Entire Shift Lever
  • Unpainted Shift Knob - Ed Roth
    Unpainted Shift Knob - Ed Roth
    SKU-910942
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. This can fit as a automatic shift knob or a manual shift knob.
            
  • Lokar X70-BHRB Midnight Series Billet Round Shifter Boot Ring w/Boot
    Lokar X70-BHRB Midnight Series Billet Round Shifter Boot Ring w/Boot
    SKU-491X70BHRB
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, OR billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings also available in black anodized.
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • The Hand Brake Boots are available in transmount or floor mount styles.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
Goto Previous PagePrevious Page
1 2 3 4