Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Shift into high gear with manual transmission parts from Speedway Motors.  Featuring shifters, boots, and tons of unique shifting knobs.  And with a 98% in-stock rate and same day shipping, you can bet you'll get your roadster parts fast!

"T-Bucket, Manual Transmission" Page 1 of 3

  • Big Block Chevy Balancing Plate
    Big Block Chevy Balancing Plate
    x
                

    Lets you balance your Big Block Chevy 454 engine with a 350 flywheel (manual transmission flywheel or automatic transmission flex plate) and a bolt-on balancing plate.

    • Allows use of lighter 350 flywheel to rev quicker
    • Fits between the crankshaft and flexplate
    • Correctly balances the engine without resorting to a big heavy flywheel
    • Precision stamped steel plate
    • Road and race tested

    Note: The weight welded to this plate is positioned to the block side of the plate.

  • ARP Fasteners 200-2802 Chevy Flywheel Bolts
    ARP Fasteners 200-2802 Chevy Flywheel Bolts
    x
                

    Flywheel bolts play an important role in the performance and safety of race cars and street machines alike. That’s why the fastener experts at ARP develop special bolts that are far superior to OEM hardware. Forged from aerospace alloy and heat-treated prior to thread rolling and machining.

    Fits Chevrolet 90° V6 & 265-454 Chevy V8 with 2-pc rear seal. Set of 6 bolts.

    • Exclusive, flat, 12-point head design
    • Larger than stock shank diameter for increased strength and improved flywheel register
    • Originally developed for NASCAR Winston Cup competition
    • Has a 200,000 psi rating
  • Replacement Pushrod for Manual Master Cylinder
    Replacement Pushrod for Manual Master Cylinder
    x
                

    This replacement pushrod for manual master cylinders fits our Dual Feed Master Cylinder 910-31420.

    • Overall Length:  6"
    • Threaded Length:  5-3/8"
    • Threads:  3/8" Fine

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • GM 700R4 Flexplate/Flywheel Dust Cover-Chrome
    GM 700R4 Flexplate/Flywheel Dust Cover-Chrome
    x
                

    These chrome-plated flexplate/flywheel covers are for 1982 and newer GM 700-R4, 4L60 and 4L60E automatic overdrive transmissions.  They are stock replacement torque converter inspection covers.

    • Chrome-plated steel
    • For 1982 and newer GM 700R4, 4L60 and 4L60E automatic overdrive transmissions
    • Stock replacement
  • Flathead V8 to Ford C4 Transmission Basic Adapter Kit
    Flathead V8 to Ford C4 Transmission Basic Adapter Kit
    x
                

    If you have access to your own transmission and parts or you wish to adapt an AOD, Ford C-4 or Ford C-6, this basic adapter set is what you need. Includes: starter nose cone, flexplate, bellhousing adapter and instructions. Choice of 157 or 164 flexplate. Use with 302-351W transmission. For Ford C4 and Ford C6 transmission application.

    916-28901 Instructions (pdf)

  • Lokar SK-6878 Shift Knob Adapter, 3/8-16 Thread
    Lokar SK-6878 Shift Knob Adapter, 3/8-16 Thread
    x
                This adapter allows you to use a shifter knob that has a 3/8"-16 thread. By pushing straight down on the knob, you can shift gears but retain the original safety features. 
            
  • Lokar SK-6879 Shifter Knob Adapter, 3/8-24 Thread
    Lokar SK-6879 Shifter Knob Adapter, 3/8-24 Thread
    x
                This adapter allows you to use a shifter knob that has a 3/8"-24 thread. By pushing straight down on the knob, you can shift gears but retain the original safety features. 
            
  • Speedway Hot Rod Shifter Boots
    Speedway Hot Rod Shifter Boots
    x
                

    Each Speedway hot rod shifter boot kit includes a black vinyl boot, polished stainless base ring and stainless screws.

    Base ring has 4" inside diameter and 5" outside diameter.
       

  • Chevy Turbo 350/400 Flywheel Cover Bolt Kit
    Chevy Turbo 350/400 Flywheel Cover Bolt Kit
    x
                Flywheel cover bolt kit for Small Block Chevy (SBC) Turbo 350 and 400. 
            
  • Unpainted Shift Knob - Jet Fighter Norm
    Unpainted Shift Knob - Jet Fighter Norm
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. Can be used as automatic shift knob or manual shift knob.
            
  • Unpainted Shift Knob - Helmet Skull
    Unpainted Shift Knob - Helmet Skull
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. Can be used as automatic shift knob or manual shift knob.
            
  • Speedway Transmission Mount E-Brake Boots
    Speedway Transmission Mount E-Brake Boots
    x
                Each Speedway transmission mount emergency brake boot kit includes a black naugahyde boot, polished stainless base ring and stainless screws. 

    Base ring is 6-1/4" x 2-1/2" outside diameter and 5-1/4" x 1-1/2" inside diameter.
  • Quick Time RM-6070 Adapter Bellhousing, Mopar 318/360 to Muncie Trans
    New
    Quick Time RM-6070 Adapter Bellhousing, Mopar 318/360 to Muncie Trans
    x
                

    These durable bellhousings are perfect for mating your custom built engine and transmission.  They are designed to fit small block Mopar engines to Muncie/Jerico style transmissions. They are built from high grade steel with over 80,000 PSI strength, which is over two times the strength of any other steel bellhousing.

    • Fits Engine: Mopar 318 / 360
    • Fits Transmission: Muncie / Richmond / Falcon / Bert / Jerico 4-5 speed / Brinn / Saginaw / Chevy TKO 500-600 / BW-T10
    • Transmission bore diameter: 4.685"
    • Flywheel: 130 tooth
    • Weight: 22lbs
    • Clutch: 10.5"
    • SFI: 6.1
    • Included hardware:
      • Fork bracket
      • Full engine plate and grade 8 bolts

    9106070 Mopar to Muncie Bellhousing Instructions (PDF)

  • ARP Fasteners 150-2201 Ford 289-460V8 Pressure Plate Bolt Kit
    ARP Fasteners 150-2201 Ford 289-460V8 Pressure Plate Bolt Kit
    x
                

    The importance of pressure plate bolts in racing or hi-performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed a special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chromoly and hardened to a nominal tensile strength of 180,000 psi. 

     

    • Large diameter, low-profile design
    • 1/2" diameter head
    • .780" underhead length
    • Complete set with washers
    • Fits 1985 and earlier Ford 289-460

     

  • Ram 98794T Powergrip 1986-00 Mustang 5.0L Clutch Set, 10.5 x 1-1/8-26
    New
    Ram 98794T Powergrip 1986-00 Mustang 5.0L Clutch Set, 10.5 x 1-1/8-26
    x
                

    As engine power and torque levels increase, Powergrip Clutch sets are sure to meet the challenge. Powergrip utilizes a unique blend of 900 and 300 series friction materials and increased clamp loads to give you the holding power needed for aggressive street driving.

    • Muscle car performance clutch for up to 550 HP
    • Organic and metallic disc friction surfaces
    • 8-spring hub with Ram Polycoil damper springs to handle greater shock loads
    • Meets all SFI specifications
    • Smoot, comfortable driver control
    • Includes: pressure plate, disc, release bearing, alignment tool

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Unpainted Shift Knob - Grenade
    Unpainted Shift Knob - Grenade
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. Can be used as automatic shift knob or manual shift knob.
            
  • Lokar X70-BFMB Billet Floor Mount Shifter Boot Ring w/Boot, Black
    Lokar X70-BFMB Billet Floor Mount Shifter Boot Ring w/Boot, Black
    x
                

    Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum ring features a black anodized finish.

    It also includes a foam rubber seal to eliminate air flow from the floor through the boot.  All boots hug the shifter lever and there are no unsightly pull ties or laces.

    • Black Naugahyde construction
    • Foam rubber seal to eliminate air flow from the floor through the boot
    • Includes:
      • boot
      • billet aluminum ring with ball-milled edge
      • stainless screws

    Boot Ring Dimension Chart (Link)

  • Lokar X70-BHBF Billet Hand Brake Boot Ring w/Floor Mount Boot, Black
    Lokar X70-BHBF Billet Hand Brake Boot Ring w/Floor Mount Boot, Black
    x
                

    Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings are available in black anodized.

    Lokar's Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever. It also includes a foam rubber seal to eliminate air flow from the floor through the boot.  All boots hug the shifter lever and there are no unsightly pull ties or laces.

    • Black Naugahyde construction
    • Rings available in black anodized
    • Foam rubber seal to eliminate air flow from the floor through the boot
    • Includes:
      • boot
      • billet aluminum ring with ball-milled edge
      • stainless screws

    Boot Ring Dimension Chart (Link)

  • Lokar 70-HRB Hot Rod Shifter Boot
    Lokar 70-HRB Hot Rod Shifter Boot
    x
                Lokar shifter boots are black naugahyde and all sets  include a boot, polished stainless base ring, and stainless screws. Boot hugs the shifter lever and there are no unsightly pull ties or laces.
            
  • Unpainted Shift Knob - Ed Roth
    Unpainted Shift Knob - Ed Roth
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. This can fit as a automatic shift knob or a manual shift knob.
            
  • Cast Resin Shift Knob - Top Fuel
    Cast Resin Shift Knob - Top Fuel
    x
                Row through those gears in style with this character shift knobs. 3/8" threaded insert. Fully painted. Can be used as an automatic shift knob or a manual shift knob.
            
  • Ram 88794HDT 1986-00 Mustang 5.0L Clutch Set, 10.5 x 1-1/8-26
    New
    Ram 88794HDT 1986-00 Mustang 5.0L Clutch Set, 10.5 x 1-1/8-26
    x
                

    HDX Clutch sets are the performance upgrade for your daily driver/hot rod. Pressure plates feature increased clamp loads and Ram Clutches' 200 Series organic clutch disc use a premium organic facing material that greatly increases rotational structure.

    • Great driveability and performance up to 450 HP
    • 10.5 x 1-1/8-26
    • Smooth, chatter free operation
    • Premium organic composite disc friction material
    • Exclusive 8-spring hub assembly for added load capacity
    • Designed for 1986-00 Mustang 5.0L
    • Includes: Pressure plate, disc, release bearing, alignment tool

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Speedway Rectangular Shifter Boot
    $24.99
    $30.00
    Speedway Rectangular Shifter Boot
    x
                Each Speedway hot rod shifter boot kit includes a black vinyl boot, polished stainless base ring and stainless screws. 
    • 6.75" x 5.25" Rectangular frame
    • Black vinyl stitched boot
    • Screws included
  • Chevy Engine to Early Ford Transmission Adapter Kit
    Chevy Engine to Early Ford Transmission Adapter Kit
    x
                

    Small Block, Big Block Chevy and 90° V6 engine to Ford (1932-1948), Mercury (1939-1950), and Ford pick-up truck (1932-1952) transmission.

    Aluminum, 1 piece bellhousing with pilot bearing adaptor. 3-5/8" thick.

    Note: Use 168 tooth (large) Chevy flywheel redrilled to accept Ford clutch. Use old Ford release bearing and a Chevy 1955-1961 style 3 bolt "bellhousing-mount" starter from a manual transmission car.

    720-0392 Instructions (PDF)

  • Cast Resin Shift Knob - Frankie
    Cast Resin Shift Knob - Frankie
    x
                Row through those gears in style with this character shift knobs. 3/8" threaded insert. Fully painted. Can be used as automatic shift knob or manual shift knob.
            
  • Cast Resin Shift Knob - Devil
    Cast Resin Shift Knob - Devil
    x
                Row through those gears in style with this character shift knobs. 3/8" threaded insert. Fully painted. Can be used as automatic shift knob or manual shift knob.
            
  • Cast Resin Shift Knob - Helmet Skull
    Cast Resin Shift Knob - Helmet Skull
    x
                

    Row through those gears in style with this character shift knobs. 3/8" threaded insert. Fully painted. Can be used as automatic shift knob or manual shift knob.

  • Chevy Flywheel Cover Bolt Kit, Stainless Steel
    Chevy Flywheel Cover Bolt Kit, Stainless Steel
    x
                                    These stainless steel bolt kits will dress up your engine and resist corrosion. Allen head unless specified.             
            
  • Unpainted Shift Knob - Top Fuel
    Unpainted Shift Knob - Top Fuel
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. Can be used as automatic shift knob or manual shift knob.
            
  • Quick Time RM-6066 Adapter Bellhousing, 5.0/5.8 Ford to Muncie Trans
    New
    Quick Time RM-6066 Adapter Bellhousing, 5.0/5.8 Ford to Muncie Trans
    x
                

    These durable bellhousings are perfect for mating your custom built engine and transmission.  They are designed to fit 5.0/5.8 Ford engines to Muncie/Jerico style transmissions. They are built from high grade steel with over 80,000 PSI strength, which is over two times the strength of any other steel bellhousing.

    • Fits Engine: Ford 289 / 302 / 351W / 351C
    • Fits Transmission: Muncie / Richmond / Jerico 4-5 speed / Saginaw / Chevy TKO 500-600 / BW-T10
    • Flywheel: 157 tooth
    • Weight: 22lbs
    • Clutch: 10.5"
    • SFI: 6.1
    • Included hardware:
      • Pivot ball
      • Shifter fork brackets
      • Full engine plate and grade 8 bolts

    9106066 Ford to Muncie Bellhousing Instructions (PDF)

  • SFI-Rated Steel Flywheel for 1986-1992 Chevrolet 305-350 V8 Small Block
    SFI-Rated Steel Flywheel for 1986-1992 Chevrolet 305-350 V8 Small Block
    x
                These  SFI-Rated Flywheels are engineered to handle extreme duty applications  and designed to take the punishment of today's high horsepower engines. These billet steel flywheels are CAD engineered and precision CNC machined  to strict tolerances. The choice of 5 out of 6 winning engine builders  at the Engine Master Challenge four years running, these billet steel  flywheels were awarded "Best New Product of the Year" at the 2006 Hotrod  & Restoration Show.                                
    • SFI 1.1 approved
    • High carbon steel ring gear
    • 1 piece rear seal
    • 29 lbs
    • External balance
    • Removable counterweight
    • 153 teeth
    • SFI certified
    • Clutch Application Notes:
      • Fits 10″, 10.5″, 10.95″ B & B Diaph
      • 10″ & 10.5″ Long
      • 10″ Diaph
    • Engine Applications:
      • Chevrolet
      • 305-350 (1986-1992)
  • Speedway Large Square Shifter Boot
    $15.99
    $25.00
    Speedway Large Square Shifter Boot
    x
                Speedway shifter boots are designed to accommodate the additional length, width, and height of floor modifications in shifter installations. Large  5-1/4 " x 6-1/2 " square boot for 3- or 4-speed shifter.
            
  • Garage Sale - Ram Clutches 2.3 Ford 7-7/8 Inch Racing Clutch Pressure Plate
    Garage Sale
    Garage Sale - Ram Clutches 2.3 Ford 7-7/8 Inch Racing Clutch Pressure Plate
    x
                

    Ram designed their 7-7/8" Clutch specifically for the rigors of racing - its not just a reworked stock clutch. Weighs 8.5 pounds

    Pressure plate only, disc and flywheel are sold seperate. 

     

    This pressure plate is garage sale priced because it has been bolted on and returned.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS    

  • Garage Sale - Metalic 9.5" Clutch Disk, 1" -24 Spline
    Garage Sale
    Garage Sale - Metalic 9.5" Clutch Disk, 1" -24 Spline
    x
                

    Metalic 9-1/2",  6 pad clutch disc with sprung 1" -24 spline hub.  

     

    This clutch disc is garage sale priced because we don't usually offer this disc.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Walnut Round Shifter Knob With Ford Script
    Garage Sale
    Garage Sale - Walnut Round Shifter Knob With Ford Script
    x
                

    This shifter knob is garage sale priced because it is different than what we currently offer.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

    Walnut round style shifter knob with Ford script.  5/16"-24 Threads

  • Garage Sale - Ram Coupler Adaptor Ring
    $25.99
    $35.99
    Garage Sale
    Garage Sale - Ram Coupler Adaptor Ring
    x
                

    Adaptor ring for a Ram coupler.

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

Goto Previous PagePrevious Page
1 2 3