Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop T-Bucket Manual Transmission At Speedway Motors

Shift into high gear with manual transmission parts from Speedway Motors.  Featuring shifters, boots, and tons of unique shifting knobs.  And with a 98% in-stock rate and same day shipping, you can bet you'll get your roadster parts fast!

"T-Bucket, Manual Transmission" Page 1 of 4

  • Flathead V8 to Ford C4 Transmission Basic Adapter Kit
    Flathead V8 to Ford C4 Transmission Basic Adapter Kit
    SKU-91628901
    x
                

    If you have access to your own transmission and parts or you wish to adapt an AOD, Ford C-4 or Ford C-6, this basic adapter set is what you need. Includes: starter nose cone, flexplate, bellhousing adapter and instructions. Choice of 157 or 164 flexplate. Use with 302-351W transmission. For Ford C4 and Ford C6 transmission application.

    916-28901 Instructions (pdf)

  • Unpainted Shift Knob - Jet Fighter Norm
    Unpainted Shift Knob - Jet Fighter Norm
    SKU-910944
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. Can be used as automatic shift knob or manual shift knob.
            
  • Lokar 70-BAF3 Deluxe Top Rect Shifter Boot w/ 5/8 Inch Sliding Bezel
    Lokar 70-BAF3 Deluxe Top Rect Shifter Boot w/ 5/8 Inch Sliding Bezel
    SKU-49170BAF3
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot Rings Sold Separately
  • Unpainted Shift Knob - Helmet Skull
    Unpainted Shift Knob - Helmet Skull
    SKU-910945
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. Can be used as automatic shift knob or manual shift knob.
            
  • Lokar X70-BFR Midnight Series Billet Rectangular Shifter Boot Ring
    Lokar X70-BFR Midnight Series Billet Rectangular Shifter Boot Ring
    SKU-491X70BFR
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, OR billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings also available in black anodized.
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
  • Lokar X70-BAF1 Black Alum Hi-Top Rect. Shifter Boot w/Bezel, 3/8 In-24
    Lokar X70-BAF1 Black Alum Hi-Top Rect. Shifter Boot w/Bezel, 3/8 In-24
    SKU-491X70BAF1
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Speedway Transmission Mount E-Brake Boots
    Speedway Transmission Mount E-Brake Boots
    SKU-91021803
    x
                Each Speedway transmission mount emergency brake boot kit includes a black naugahyde boot, polished stainless base ring and stainless screws. 

    Base ring is 6-1/4" x 2-1/2" outside diameter and 5-1/4" x 1-1/2" inside diameter.
  • Quick Time RM-6070 Adapter Bellhousing, Mopar 318/360 to Muncie Trans
    Quick Time RM-6070 Adapter Bellhousing, Mopar 318/360 to Muncie Trans
    SKU-9106070
    x
                

    These durable bellhousings are perfect for mating your custom built engine and transmission.  They are designed to fit small block Mopar engines to Muncie/Jerico style transmissions. They are built from high grade steel with over 80,000 PSI strength, which is over two times the strength of any other steel bellhousing.

    • Fits Engine: Mopar 318 / 360
    • Fits Transmission: Muncie / Richmond / Falcon / Bert / Jerico 4-5 speed / Brinn / Saginaw / Chevy TKO 500-600 / BW-T10
    • Transmission bore diameter: 4.685"
    • Flywheel: 130 tooth
    • Weight: 22lbs
    • Clutch: 10.5"
    • SFI: 6.1
    • Included hardware:
      • Fork bracket
      • Full engine plate and grade 8 bolts

    9106070 Mopar to Muncie Bellhousing Instructions (PDF)

  • ARP Fasteners 150-2201 Ford 289-460V8 Pressure Plate Bolt Kit
    ARP Fasteners 150-2201 Ford 289-460V8 Pressure Plate Bolt Kit
    SKU-1011502201
    x
                

    The importance of pressure plate bolts in racing or hi-performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed a special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chromoly and hardened to a nominal tensile strength of 180,000 psi. 

     

    • Large diameter, low-profile design
    • 1/2" diameter head
    • .780" underhead length
    • Complete set with washers
    • Fits 1985 and earlier Ford 289-460

     

  • Lokar 70-BAF2 Hi-Top Rect Shifter Boot w/ 3/8 Inch - 16 Threaded Bezel
    Lokar 70-BAF2 Hi-Top Rect Shifter Boot w/ 3/8 Inch - 16 Threaded Bezel
    SKU-49170BAF2
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Ram 98794T Powergrip 1986-00 Mustang 5.0L Clutch Set, 10.5 x 1-1/8-26
    Ram 98794T Powergrip 1986-00 Mustang 5.0L Clutch Set, 10.5 x 1-1/8-26
    SKU-60598794
    x
                

    As engine power and torque levels increase, Powergrip Clutch sets are sure to meet the challenge. Powergrip utilizes a unique blend of 900 and 300 series friction materials and increased clamp loads to give you the holding power needed for aggressive street driving.

    • Muscle car performance clutch for up to 550 HP
    • Organic and metallic disc friction surfaces
    • 8-spring hub with Ram Polycoil damper springs to handle greater shock loads
    • Meets all SFI specifications
    • Smoot, comfortable driver control
    • Includes: pressure plate, disc, release bearing, alignment tool

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Lokar 70-BAF1 Hi-Top Rect Shifter Boot w/ 3/8 Inch - 24 Threaded Bezel
    Lokar 70-BAF1 Hi-Top Rect Shifter Boot w/ 3/8 Inch - 24 Threaded Bezel
    SKU-49170BAF1
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Lokar 70-CR2 Hi-Top Chrome Rnd. Shifter Boot, 3/8 Inch-16 Thread Bezel
    Lokar 70-CR2 Hi-Top Chrome Rnd. Shifter Boot, 3/8 Inch-16 Thread Bezel
    SKU-49170CR2
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Lokar 70-CBB1 Chrome Shifter Boot Bezel, 3/8 Inch - 24 Thread
    Lokar 70-CBB1 Chrome Shifter Boot Bezel, 3/8 Inch - 24 Thread
    SKU-49170CBB1
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
  • Unpainted Shift Knob - Grenade
    Unpainted Shift Knob - Grenade
    SKU-910943
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. Can be used as automatic shift knob or manual shift knob.
            
  • Lokar 70-CF1 Hi-Top Rect Shifter Boot, 3/8 Inch-24 Thread Chrome Bezel
    Lokar 70-CF1 Hi-Top Rect Shifter Boot, 3/8 Inch-24 Thread Chrome Bezel
    SKU-49170CF1
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Lokar X70-BAF2 Black Alum Hi-Top Rect. Shifter Boot w/Bezel, 3/8 In-16
    Lokar X70-BAF2 Black Alum Hi-Top Rect. Shifter Boot w/Bezel, 3/8 In-16
    SKU-491X70BAF2
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Lokar SK-6879 Shifter Knob Adapter, 3/8-24 Thread
    Lokar SK-6879 Shifter Knob Adapter, 3/8-24 Thread
    SKU-4916879
    x
                This adapter allows you to use a shifter knob that has a 3/8"-24 thread. By pushing straight down on the knob, you can shift gears but retain the original safety features. 
            
  • Replacement Pilot Bushing, Chevy Engine to Ford Trans
    Replacement Pilot Bushing, Chevy Engine to Ford Trans
    SKU-7205000
    x
                

    Replacement pilot bushing for use with adapter 720-0392 for Chevy V8/V6 engines to Ford (1932-1948), Mercury (1939-1950), and Ford pick-up truck (1932-1952) transmissions.

    • Adapts Ford transmission to Chevy crankshaft
    • 1.093" O.D.
    • .671" I.D.
    • 1.45" long
  • Lokar X70-BFMB Billet Floor Mount Shifter Boot Ring w/Boot, Black
    Lokar X70-BFMB Billet Floor Mount Shifter Boot Ring w/Boot, Black
    SKU-49107071
    x
                

    Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum ring features a black anodized finish.

    It also includes a foam rubber seal to eliminate air flow from the floor through the boot.  All boots hug the shifter lever and there are no unsightly pull ties or laces.

    • Black Naugahyde construction
    • Foam rubber seal to eliminate air flow from the floor through the boot
    • Includes:
      • boot
      • billet aluminum ring with ball-milled edge
      • stainless screws

    Boot Ring Dimension Chart (Link)

  • Lokar 70-BAR2 Hi-Top Round Shifter Boot w/ 3/8 Inch-16 Threaded Bezel
    Lokar 70-BAR2 Hi-Top Round Shifter Boot w/ 3/8 Inch-16 Threaded Bezel
    SKU-49170BAR2
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot rings sold seperately
  • Lokar 70-BAB3 Billet Aluminum Sliding Shifter Boot Bezel, 5/8 Inch
    Lokar 70-BAB3 Billet Aluminum Sliding Shifter Boot Bezel, 5/8 Inch
    SKU-49170BAB3
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boots Available To Cover Entire Shift Lever
  • Lokar X70-BAB2 Black Billet Alum Shifter Boot Bezel, 3/8 In-16 Thread
    Lokar X70-BAB2 Black Billet Alum Shifter Boot Bezel, 3/8 In-16 Thread
    SKU-491X70BAB2
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boots Available To Cover Entire Shift Lever
  • Lokar X70-BSR Midnight Series Black Billet Round Shifter Boot Ring
    Lokar X70-BSR Midnight Series Black Billet Round Shifter Boot Ring
    SKU-491X70BSR
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, OR billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings also available in black anodized.
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • The Hand Brake Boots are available in transmount or floor mount styles.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
  • Lokar X70-BAR3 Blk Deluxe Top Round Shifter Boot w/Sliding Alum Bezel
    Lokar X70-BAR3 Blk Deluxe Top Round Shifter Boot w/Sliding Alum Bezel
    SKU-491X70BAR3
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boot Rings Sold Separately
  • Lokar X70-BHBF Billet Hand Brake Boot Ring w/Floor Mount Boot, Black
    Lokar X70-BHBF Billet Hand Brake Boot Ring w/Floor Mount Boot, Black
    SKU-49107072
    x
                

    Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings are available in black anodized.

    Lokar's Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever. It also includes a foam rubber seal to eliminate air flow from the floor through the boot.  All boots hug the shifter lever and there are no unsightly pull ties or laces.

    • Black Naugahyde construction
    • Rings available in black anodized
    • Foam rubber seal to eliminate air flow from the floor through the boot
    • Includes:
      • boot
      • billet aluminum ring with ball-milled edge
      • stainless screws

    Boot Ring Dimension Chart (Link)

  • Lokar 70-HRB Hot Rod Shifter Boot w/ Stainless Ring
    Lokar 70-HRB Hot Rod Shifter Boot w/ Stainless Ring
    SKU-4917001
    x
                Lokar shifter boots are black naugahyde and all sets  include a boot, polished stainless base ring, and stainless screws. Boot hugs the shifter lever and there are no unsightly pull ties or laces.
            
  • Lokar 70-BAB1 Billet Aluminum Shifter Boot Bezel, 3/8 Inch - 24 Thread
    Lokar 70-BAB1 Billet Aluminum Shifter Boot Bezel, 3/8 Inch - 24 Thread
    SKU-49170BAB1
    x
                
    • Designed To Attach To Top Of Shifter Lever
    • Doubles As A Jam Nut
    • Screws Directly On the Shifter Thread
    • Receiver Groove For Easy Boot Attachment
    • Boots Available To Cover Entire Shift Lever
  • Unpainted Shift Knob - Ed Roth
    Unpainted Shift Knob - Ed Roth
    SKU-910942
    x
                Show your crafty side and finish these as cast knobs to your specs. Must be drilled for insert, not included. This can fit as a automatic shift knob or a manual shift knob.
            
  • Lokar X70-BHRB Midnight Series Billet Round Shifter Boot Ring w/Boot
    Lokar X70-BHRB Midnight Series Billet Round Shifter Boot Ring w/Boot
    SKU-491X70BHRB
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, OR billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings also available in black anodized.
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • The Hand Brake Boots are available in transmount or floor mount styles.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
  • Cast Resin Shift Knob - Top Fuel
    Cast Resin Shift Knob - Top Fuel
    SKU-910941
    x
                Row through those gears in style with this character shift knobs. 3/8" threaded insert. Fully painted. Can be used as an automatic shift knob or a manual shift knob.
            
  • Lokar 70-BFR Billet Rectangular Shifter Boot Ring
    Lokar 70-BFR Billet Rectangular Shifter Boot Ring
    SKU-49170BFR
    x
                Rectangular shifter boot ring from Lokar. Billet aluminum rectangular ring with ball-milled edge and stainless screws. 
  • Ram 88794HDT 1986-00 Mustang 5.0L Clutch Set, 10.5 x 1-1/8-26
    Ram 88794HDT 1986-00 Mustang 5.0L Clutch Set, 10.5 x 1-1/8-26
    SKU-60588794
    x
                

    HDX Clutch sets are the performance upgrade for your daily driver/hot rod. Pressure plates feature increased clamp loads and Ram Clutches' 200 Series organic clutch disc use a premium organic facing material that greatly increases rotational structure.

    • Great driveability and performance up to 450 HP
    • 10.5 x 1-1/8-26
    • Smooth, chatter free operation
    • Premium organic composite disc friction material
    • Exclusive 8-spring hub assembly for added load capacity
    • Designed for 1986-00 Mustang 5.0L
    • Includes: Pressure plate, disc, release bearing, alignment tool

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Lokar 70-BCLB Classic Shifter Boot with Billet Boot Ring
    Lokar 70-BCLB Classic Shifter Boot with Billet Boot Ring
    SKU-49170BCLB
    x
                
    • Black naugahyde. Includes foam rubber seal. Eliminates air flow from floor through boot. Designed with polished stainless bezel on top of boot. No unsightly pull ties or laces. Boot hugs shifter lever. Made in the U.S.A. Lifetime warranty.
    • Black Naugahyde
    • Incl. Foam Rubber Seal
    • Eliminates Air Flow From Floor Through Boot
    • Designed w/Polished Stainless Bezel On Top Of Boot
    • No Unsightly Pull Ties Or Laces
    • Boot Hugs Shifter Lever
    • Made In The U.S.A.
    • Lifetime Warranty
  • Speedway Rectangular Shifter Boot
    $24.99
    $30.00
    Product Rating: 4.00 Stars
    Speedway Rectangular Shifter Boot
    SKU-91021804
    x
                Each Speedway hot rod shifter boot kit includes a black vinyl boot, polished stainless base ring and stainless screws. 
    • 6.75" x 5.25" Rectangular frame
    • Black vinyl stitched boot
    • Screws included
  • Chevy Engine to Early Ford Transmission Adapter Kit
    Chevy Engine to Early Ford Transmission Adapter Kit
    SKU-7200392
    x
                

    Small Block, Big Block Chevy and 90° V6 engine to Ford (1932-1948), Mercury (1939-1950), and Ford pick-up truck (1932-1952) transmission.

    Aluminum, 1 piece bellhousing with pilot bearing adaptor. 3-5/8" thick.

    Note: Use 168 tooth (large) Chevy flywheel redrilled to accept Ford clutch. Use old Ford release bearing and a Chevy 1955-1961 style 3 bolt "bellhousing-mount" starter from a manual transmission car.

    720-0392 Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3 4