Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 12

Products

Fasteners and Hardware

Shop T-Bucket Hardware At Speedway Motors

Let Speedway Motors help you assemble your T-Bucket project the correct way with the right fasteners and hardware. With various sizes and styles of rivets, nuts, bolts, and tie wraps, Speedway Motors is sure to have what need for your T-Bucket project needs.

Featured Products
  • Goodridge SS902-07 Stat-O-Seal Sealing Washer, -4 AN
    Goodridge SS902-07 Stat-O-Seal Sealing Washer, -4 AN
    (Part #6179061)
    x
                

    Goodridge Stat-O-Seals are the best sealing washers available. Synthetic rubber O-ring bonded to an aluminum crush washer. Provides the advantages of an O-ring seal, but with the ease of fittings. Will withstand temperatures from -85°F to 450°F.

    AN Fitting Thread Chart (GIF)

  • Stainless Steel Headlight Conduit Set, 12 Inch
    Stainless Steel Headlight Conduit Set, 12 Inch
    (Part #91131401)
    x
                Finish off your headlight wiring with these attractive and affordable polished stainless steel lengths of conduit. Conduit can be used to hide and protect fragile headlight, taillight or horn wires that are exposed to the elements. Two-piece set includes polished stainless ferrules to secure the conduit. Conduit measures 12" long with 3/8" I.D.
            
  • Tube Seal End, Red Anodized, -6 AN, 5/8 Inch I/D
    Tube Seal End, Red Anodized, -6 AN, 5/8 Inch I/D
    (Part #6172026)
    x
                

    Tube seal ends are designed for street applications. Connect stainless hose to outlet with low pressure indicator (not exceeding 50 psi when using AN hose size 4-12 and under 25 psi with sizes 16-32).

     

  • Tru Rivets, 3/16 Inch Large Head
    From: $9.99
    Product Rating: 4.47 Stars
    Tru Rivets, 3/16 Inch Large Head
    (Part #91004)
    x
                Large head 3/16" aluminum pop rivets with steel shank. 1/4" to 3/8" grip range. Available in red, white, pepsi (light) blue, chevron blue, yellow, black, and orange. Box of 250.
            
  • Painless 70959 3/4 Inch ClassicBraid Wire Sleeving, 6 Feet
    Painless 70959 3/4 Inch ClassicBraid Wire Sleeving, 6 Feet
    (Part #91070959)
    x
                

    This 3/4" ClassicBraid from Painless Performance has a smooth new look that will transform your engine and give you that factory installed look. Its woven construction gives you excellent blockage against mud and dirt while giving you adequate drainage for optimum wiring protection.

    • Made in the USA
    • Continuous Temperature Rating -94° to 257°F
    • Melting Point 482°F
    • Resistant to Automotive Chemicals & Fluids
    • Great For Auto, Marine, RV, Aircraft, Power Sports, & More
    • 6' Long
  • Painless 70960 1 Inch ClassicBraid Wire Sleeving, 12 Feet
    Painless 70960 1 Inch ClassicBraid Wire Sleeving, 12 Feet
    (Part #91070960)
    x
                

    This 1" ClassicBraid from Painless Performance has a smooth new look that will transform your engine and give you that factory installed look. Its woven construction gives you excellent blockage against mud and dirt while giving you adequate drainage for optimum wiring protection.

    • Made in the USA
    • Continuous Temperature Rating -94° to 257°F
    • Melting Point 482°F
    • Resistant to Automotive Chemicals & Fluids
    • Great For Auto, Marine, RV, Aircraft, Power Sports, & More
    • 12' long
  • Universal Drive Shaft U-Bolts, 1-1/16 Inch Cap
    Universal Drive Shaft U-Bolts, 1-1/16 Inch Cap
    (Part #91048319)
    x
                Speedway universal drive shaft U-bolts are forged steel for 50% more strength than standard units. Fits U-joints with 1-1/16" diameter caps.
            
  • Goodridge SS902-09 Stat-O-Seal Sealing Washers, -6 AN
    Goodridge SS902-09 Stat-O-Seal Sealing Washers, -6 AN
    (Part #6179062)
    x
                

    Goodridge Stat-O-Seals are the best sealing washers available. Synthetic rubber O-ring bonded to an aluminum crush washer. Provides the advantages of an O-ring seal, but with the ease of fittings. Will withstand temperatures from -85°F to 450°F.

    AN Fitting Thread Chart (GIF)

Filter

"T-Bucket, Fasteners and Hardware" Page 1 of 12

Page 1 of 12

  • 1949-53 Flathead Stainless Steel Spark Plug Wire Looms
    1949-53 Flathead Stainless Steel Spark Plug Wire Looms
    (Part #91612002)
    x
                

    Polished stainless steel tubes accommodate wires up to 7 mm. Attaches to intake manifold of 1949-1953 flathead Ford V8's. Will not work with oil fill/vent tube on '49-'53 engines without modification (may use '48-older vent/fill which was part of the fuel pump stand).

  • CON2R 7-002 Chrome Wing Nut, 1/4-20 Thread, 2-1/4 Across, 1-1/2 Tall
    CON2R 7-002 Chrome Wing Nut, 1/4-20 Thread, 2-1/4 Across, 1-1/2 Tall
    (Part #910322)
    x
                

    This wing nut is for-sure an attention getter. Perfect topper for the air cleaner on a big four barrel, on top of your tri-power pots or an accent piece wherever you need it.

  • Zip Tie Wraps, Stainless Steel Tooth, Black, 100 per Bag
    Zip Tie Wraps, Stainless Steel Tooth, Black, 100 per Bag
    (Part #940048)
    x
                

    These zip ties are made in the U.S.A. and feature a stainless steel securing tooth. They come 100 to a package and are perfect for securing loose wiring and hoses or can help serve as temporary fixes to many odd jobs and projects.

    • Stainless Tooth Tie Wraps feature super strong self-locking, stainless steel tooth, one piece design, standard size head.
    • Black Tie Wraps are UV resistant. Recommended for outdoor usage.
    • Metal Detectable
    • Temperature Ratings 185 F / 85 C.
    • UL Flame Rating 94V-2.
    • Minimum installation temperature is greater than 32 F or 0 C.
    • Made From Nylon 6/6.
    • Choose from lengths of 4", 5.5", 7.3", and 11.4"
    • 100 per Bag
  • Mag Daddy 3/4 Inch Medium Cable Daddy Magnetic Wire Fasteners, 5-Pack
    Mag Daddy 3/4 Inch Medium Cable Daddy Magnetic Wire Fasteners, 5-Pack
    (Part #91033243)
    x
                These medium Mag Daddy™ fasteners are designed to hold up to 10  unshielded Cat 5 Cables.  Rated at 16 lbs., these black fasteners  feature a magnetic bond for easy installation and removal without the  use of screws, wires, or zip-ties.
    • Easy Installation
    • Plastic lasts 20x longer than Nylon 6.6
    • Rotates 360°
    • Reusable
    • Take wires in and out
    • Sold in sets of 5 

    Suggested locations for use: Steel, Beams, Purlins, Ceiling Decks, Drop Ceiling Channels, Metal Joists, Frame Rail, Screw Heads, Metal Washer, etc.

    91033243 Cable Daddy Information/Instructions (PDF) 

  • Speed Fast Stainless Safety Wire, .032 Inch
    Speed Fast Stainless Safety Wire, .032 Inch
    (Part #91089407)
    x
                Speed Fast 304 stainless steel safety wire. Sold in one pound rolls and comes with a handy belt clip.
            
  • Quik-Latch Products QL-25-SP Mini Quick-Latch, Polished Aluminum
    Quik-Latch Products QL-25-SP Mini Quick-Latch, Polished Aluminum
    (Part #91007156)
    x
                

    These small latches can be used for multi-purpose quick release latching. Center release button stays in the down position until re-latched. Each latch body has a 1-1/4" O.D. and is supplied with one mounting stud, two threaded nuts, and two washers. Mounting cup (sold seperately) is used to mount the stud underneath the panel. Mounting cup can be easily riveted or bolted to the back side of any panel.

    • Diameter of Latch Body:  1.23"
    • Length of Latch Body:  0.57"
    • 1/4"-20 Thread
    • Length of Mounting Stud:  2.13"

    Works great for:

    • T-Bucket bed covers
    • Hood pins
    • Deck lids
    • Air cleaner stud
    • Removeable body panels
  • Mag Daddy 1/2 In Large Cable Daddy Magnetic Wire/Cable Fasteners
    Mag Daddy 1/2 In Large Cable Daddy Magnetic Wire/Cable Fasteners
    (Part #91062423)
    x
                Mag Daddy Cable-Daddy™ fasteners are designed to  easily secure all wires and cables in a variety of environments. These  magnetic fasteners adhere to most all metal surfaces with an absurd 23  lbs. of retention force! Mag Daddy Cable-Daddy™ fasteners are the best  solution to wire and cable management. They're offered in a choice of  three sizes to meet your requirements. Whether you need to hold a brake  line in place or quickly organize wires or cables, Mad Daddy Cable-Daddy™  fasteners are the perfect fix.
    • Black rectangular cable hold-down
    • 23 lbs. of retention force
    • Magnet base is 26mm x 11mm with a total height of 18.5mm
    • Holds up to 20 unshielded Cat 5 Cables
    • Easy Installation
    • Plastic lasts 20x longer than Nylon 6.6
    • Ability to Rotate 360°
    • Re-usability
    • Take in and out wires
    • Sold in packs of 5

    Locations: Steel, Beams, Purlins, Ceiling Decks, Drop Ceiling Channels, Metal Joists, Frame Rail, Screw Heads, Metal Washer, etc.

    91062423 Cable Daddy Information/Instructions (PDF)

  • Tire Grinding Disc, 7 Inch Nail Head
    Tire Grinding Disc, 7 Inch Nail Head
    (Part #91082081)
    x
                
    • 7" diameter
    • Nail head design
    • Very aggressive, check sanctioning body rules before use

    NOTE: Use extreme caution - serious injury can result from the use of discs. When powered by a buffer, these discs can cut your arm or leg off.

    • Never use in a loose tire
    • Never use on a tire that is not inflated and fastened
    • Do not use while wearing loose fitted clothing
    • Use eye and face protection
  • Painless 70956 1/8 Inch ClassicBraid Wire Sleeving, 20 Feet
    Painless 70956 1/8 Inch ClassicBraid Wire Sleeving, 20 Feet
    (Part #91070956)
    x
                

    This ClassicBraid has a smooth texture and appearance that will transform your engine bay and give you that factory installed look. Its tight woven construction gives you an excellent blockade against mud and dirt while keeping adequate drainage for optimum wiring protection. 

    • Made in the USA
    • Continuous Temperature Rating -94° to 257°F
    • Melting Point 482°F
    • Resistant to Automotive Chemicals & Fluids
    • Great For Auto, Marine, RV, Aircraft, Power Sports, & More
    • 20' long
  • Tube Seal End, Red Anodized, -24 AN, 1-7/8 Inch I/D
    Tube Seal End, Red Anodized, -24 AN, 1-7/8 Inch I/D
    (Part #6172023)
    x
                Tube seal ends are designed for street applications. Connect stainless  hose to outlet with low pressure indicator (not exceeding 50 psi when  using AN hose size 4-12 and under 25 psi with sizes 16-32).
            
  • Aluminum Allen Pipe Plugs, 1/4 Inch NPT
    Aluminum Allen Pipe Plugs, 1/4 Inch NPT
    (Part #6176204)
    x
                

    Allen pipe plugs are precision machined to ensure precise thread engagement. These lightweight aluminum plug fittings are designed to match up with all performance hose and hose ends. Blue anodized finish.

    AN Thread Sizing Guide (GIF)

    Fitting Thread Application Chart (GIF)

  • Tube Seal End, Chrome, -20 AN, 1-5/8 Inch I/D
    Tube Seal End, Chrome, -20 AN, 1-5/8 Inch I/D
    (Part #6172222)
    x
                Tube seal ends are designed for street applications. Connect stainless  hose to outlet with low pressure indicator (not exceeding 50 psi when  using AN hose size 4-12 and under 25 psi with sizes 16-32).
            
  • AFCO 80745 Twister Pliers
    $49.99
    $50.99
    AFCO 80745 Twister Pliers
    (Part #10680745)
    x
                
    • Utilizes end bearing for faster, smoother twisting
    • Great for use in small areas where a second pull is required
  • Tri-Bar Wing Nut, Chrome
    $1.99
    Tri-Bar Wing Nut, Chrome
    (Part #9102179)
    x
                

    Wing nut is approximately 5/8” tall with 1/4"-20 threads.

  • Russell Performance 662071 Endura Finish Aluminum Pipe Plug-3/4 In NPT
    Russell Performance 662071 Endura Finish Aluminum Pipe Plug-3/4 In NPT
    (Part #61766207)
    x
                

    Don't you just hate it when you have a polished intake or water pump and the only pipe plugs you can find are blue or steel? These Allen head aluminum plugs from Russell Performance have a durable anodized Endura finish.

    Fitting Thread Application Chart (GIF)

  • Plain Steel Sleeve for 5/8 Inch Rod Ends, Custom Length
    Plain Steel Sleeve for 5/8 Inch Rod Ends, Custom Length
    (Part #91631-999)
    x
                

    If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths along with custom, made-to-order lengths. Measurements are in assembled eye-to-eye lengths.

    To order:

    1. Use guide below to measure your finished length.
    2. The part number and length you order will be 3" longer than the sleeve you receive. (I.E., if you order a 48" part number, you will receive a 45" long sleeve.) This is the difference in length required to give you the correct finished center-to-center measurement.
    3. All sleeves will have internal RH thread in one end and LH thread in the other.

    Measuring Guide for Tie Rod/Drag Link (GIF)

  • Male Bullet Connectors, 16-14 Gauge
    Male Bullet Connectors, 16-14 Gauge
    (Part #91055670)
    x
                Secure loose/spliced wire ends to each other with these bullet connectors. 
    • Works with 16-14 gauge wire
    • Comes in a package of 100
  • Black Aluminum Jam Nuts, 5/16-24 Thread, 12 Pack
    Black Aluminum Jam Nuts, 5/16-24 Thread, 12 Pack
    (Part #3159496)
    x
                
    These jam nuts are made of 7075 aluminum alloy and are black anodized for corrosion resistance.
    • Fine thread for use with rod ends, heim joints, and clevis
    • Includes (6) RH and (6) LH threaded jam nuts
    • 5/16-24 Thread
    • 3/8" hex
    • Pack of 12
  • Black Aluminum Jam Nuts, 1/4-28 Thread, 12 Pack
    Black Aluminum Jam Nuts, 1/4-28 Thread, 12 Pack
    (Part #3159495)
    x
                
    These jam nuts are made of 7075 aluminum alloy and are black anodized for corrosion resistance.
    • Fine thread for use with rod ends, heim joints, and clevis
    • Includes (6) RH and (6) LH threaded jam nuts
    • 1/4-28 Thread
    • 3/8" hex
    • Pack of 12
  • HRP HRP6997 Mule Axle Rack Combo
    HRP HRP6997 Mule Axle Rack Combo
    (Part #9406997)
    x
                
    • Each set comes with 4 tube clamps
    • Mounts on front of mule, adjustable and easily removed
    • Aluminum construction
    • Powdercoated black
    • Set contains 2 brackets
Goto Previous PagePrevious Page
1 2 3 4 5 ... 12