Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop T-Bucket Hardware At Speedway Motors

Let Speedway Motors help you assemble your T-Bucket project the correct way with the right fasteners and hardware. With various sizes and styles of rivets, nuts, bolts, and tie wraps, Speedway Motors is sure to have what need for your T-Bucket project needs.

Featured Products
Tru Rivets, 3/16 Inch Large Head
From: $9.99
Product Rating: 4.47 Stars
Tru Rivets, 3/16 Inch Large Head
x
            Large head 3/16" aluminum pop rivets with steel shank. 1/4" to 3/8" grip range. Available in red, white, pepsi (light) blue, chevron blue, yellow, black, and orange. Box of 250.
        
Plain Steel Sleeves for 5/8 Inch Rod Ends
Plain Steel Sleeves for 5/8 Inch Rod Ends
x
            

If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths along with custom, made-to-order lengths. Measurements are in assembled eye-to-eye lengths.

To order:

  1. Use guide below to measure your finished length.
  2. The part number and length you order will be 3" longer than the sleeve you receive. (I.E., if you order a 48" part number, you will receive a 45" long sleeve.) This is the difference in length required to give you the correct finished center-to-center measurement.
  3. All sleeves will have internal RH thread in one end and LH thread in the other.

Measuring Guide for Tie Rod/Drag Link (GIF)

Large Head 3/16 Inch Exploding Rivets
Large Head 3/16 Inch Exploding Rivets
x
            

Ok, they don’t really explode, but the back side splits into folds so you don’t normally need to use a back-up washer with them. They work great where it’s hard to reach the back side. Choose small or large head and the color of your choice. Plain, Black, White, Red, Orange, Yellow, Pepsi (light) Blue or Chevron (dark) Blue.

  • Box of 250
  • Large head is 5/8 O.D.
  • Aluminum pop rivet with aluminum shank

Color Chart (GIF)

Small Head 3/16 Inch Exploding Rivets
Small Head 3/16 Inch Exploding Rivets
x
            

Ok, they don’t really explode, but the back side splits into folds so you don’t normally need to use a back-up washer with them. They work great where it’s hard to reach the back side. Choose small or large head and the color of your choice. Plain, Black, White, Red, Orange, Yellow, Pepsi (light) Blue or Chevron (dark) Blue.

  • Box of 250
  • Small head is 3/8 O.D.
  • Aluminum pop rivet with aluminum shank

Color Chart (GIF)

"T-Bucket, Fasteners and Hardware" Page 1 of 7

  • Speed Fast Stainless Safety Wire, .032 Inch
    Speed Fast Stainless Safety Wire, .032 Inch
    x
                Speed Fast 304 stainless steel safety wire. Sold in one pound rolls and comes with a handy belt clip.
            
  • 3/16 Inch Back Up Washers
    $8.99
    3/16 Inch Back Up Washers
    x
                Use with our pop rivets for added strength. 3/16" aluminum. Box of 500. 
            
  • JAZ Products 720-000-01 Engine Stand Drip Tray
    JAZ Products 720-000-01 Engine Stand Drip Tray
    x
                
    • Helps keep your shop floor clean during engine disassembly
    • Designed to fit most three and four leg engine stands 
    • Made from durable black plastic for long service 
    • Cleans easily with soap and water or in a solvent tank 
    • Big enough to catch debris from a big block 
    • Small enough to stay out of your way
  • Russell Performance 662061 Endura Finish Aluminum Pipe Plug-1/2 In NPT
    Russell Performance 662061 Endura Finish Aluminum Pipe Plug-1/2 In NPT
    x
                

    Don't you just hate it when you have a polished intake or water pump and the only pipe plugs you can find are blue or steel? These Allen head aluminum plugs from Russell Performance have a durable anodized Endura finish.

    Fitting Thread Application Chart (GIF)

  • Safety Wire Twister Plier Tool, 9 Inch
    Safety Wire Twister Plier Tool, 9 Inch
    x
                Precision-made safety wire pliers for quick wiring. Clamp jaws over wire end, pull knurled twister. Positive locking spring loaded handles.
            
  • Tru Rivets, 3/16 Inch Large Head
    From: $9.99
    Product Rating: 4.47 Stars
    Tru Rivets, 3/16 Inch Large Head
    x
                Large head 3/16" aluminum pop rivets with steel shank. 1/4" to 3/8" grip range. Available in red, white, pepsi (light) blue, chevron blue, yellow, black, and orange. Box of 250.
            
  • 7/16 Inch to AN3 Banjo Fitting
    7/16 Inch to AN3 Banjo Fitting
    x
                7/16 Inch to AN3 Banjo Fitting
            
  • Stainless Steel Headlight Conduit Set, 12 Inch
    Stainless Steel Headlight Conduit Set, 12 Inch
    x
                Finish off your headlight wiring with these attractive and affordable polished stainless steel lengths of conduit. Conduit can be used to hide and protect fragile headlight, taillight or horn wires that are exposed to the elements. Two-piece set includes polished stainless ferrules to secure the conduit. Conduit measures 12" long with 3/8" I.D.
            
  • Plastic AN Cap and Plug Kit - 72 Pieces
    Plastic AN Cap and Plug Kit - 72 Pieces
    x
                

    If you don't have one of these kits, get one now. Includes six each cap and plug for AN 3, AN 4, AN 6, AN 8, AN 10 and AN 12.

  • Tube Seal End, Red Anodized, -6 AN, 5/8 Inch I/D
    Tube Seal End, Red Anodized, -6 AN, 5/8 Inch I/D
    x
                

    Tube seal ends are designed for street applications. Connect stainless hose to outlet with low pressure indicator (not exceeding 50 psi when using AN hose size 4-12 and under 25 psi with sizes 16-32).

     

  • AN Fitting Plug Economy Pack
    $15.99
    AN Fitting Plug Economy Pack
    x
                

    These AN fitting plugs have always been hard-to-find items. Plugs are used when sealing spare race engines against dirt and water during transportation and storage. Each plug is reusable. Use on oil, fuel, or coolant lines.

    Economy packs contain one four pack each of -4 AN, -6 AN, -8 AN, -10 AN, and -12 AN size.

  • Split Wire Loom Conduit Tubing, 3/8 Inch Diameter, 12 Ft. Long
    Split Wire Loom Conduit Tubing, 3/8 Inch Diameter, 12 Ft. Long
    x
                

    This plastic split wire loom allows you to clean up that ugly wiring under the hood for a more professional look. This tubing will group and protect your wires from damage.  Simply lay out and insert wires, which will remain inside even with flex.  Choose from 5 colors to customize your engine bay: black, dark blue, purple, red, or yellow. 

    • 12 ft. long
    • 3/8" diameter
    • Plastic split conduit
    • More professional appearance
    • Groups and protects wires against damage 
    • Retains wires under flex and adjustment
    • Comes with zip-ties to secure wire loom
    • Choose: black, dark blue, purple, red, or yellow
  • 14 Gauge Primary Automotive Electrical Accessory Wire, 100 Foot Roll
    14 Gauge Primary Automotive Electrical Accessory Wire, 100 Foot Roll
    x
                

    Designed for interior, engine bay, and chassis wiring jobs, our accessory wire is high-quality automotive wire with a stranded-copper core.  It resists grease, oil, acids, and diesel fumes, and meets SAE automotive specs.  To give your wiring project a professional look, this top-notch wire is available in a variety of colors.

    14 Gauge Primary Automotive Wire

    • High temperature
    • 14 gauge
    • Multi-strand wire
    • 100 ft. roll
    • Choose from colors; black, blue, orange, purple, red and yellow.
  • 26 Compartment Organizer
    $8.99
    26 Compartment Organizer
    x
                
    • Plastic storage cas
    • 26 compartments with clear cover
  • Plain Steel Sleeves for 5/8 Inch Rod Ends
    Plain Steel Sleeves for 5/8 Inch Rod Ends
    x
                

    If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths along with custom, made-to-order lengths. Measurements are in assembled eye-to-eye lengths.

    To order:

    1. Use guide below to measure your finished length.
    2. The part number and length you order will be 3" longer than the sleeve you receive. (I.E., if you order a 48" part number, you will receive a 45" long sleeve.) This is the difference in length required to give you the correct finished center-to-center measurement.
    3. All sleeves will have internal RH thread in one end and LH thread in the other.

    Measuring Guide for Tie Rod/Drag Link (GIF)

  • Aluminum Flare Fitting Cap, Blue, -6 AN
    Aluminum Flare Fitting Cap, Blue, -6 AN
    x
                

    Aluminum caps to seal 37° flare AN male fittings. Blue anodized finish.

    Fitting Thread Application Chart (GIF)

  • Ididit 2503300040 Universal Billet Aluminum Knob, 10-32 Thread
    Ididit 2503300040 Universal Billet Aluminum Knob, 10-32 Thread
    x
                

    Universal billet aluminum switch knobs work great as a headlight switch knob, dash knob, door knobs, lock knob, wiper knob, or a radio knob. The 10-32 versions are threaded.

    • Maximum Diameter:  3/4"
    • Minimum Diameter:  1/2"
    • Height:  1-1/8"
  • Universal Drive Shaft U-Bolts, 1-1/16 Inch Cap
    Universal Drive Shaft U-Bolts, 1-1/16 Inch Cap
    x
                Speedway universal drive shaft U-bolts are forged steel for 50% more strength than standard units. Fits U-joints with 1-1/16" diameter caps.
            
  • Stallard Chassis Sprint 1/4 Inch Set Screw Shaft Collar/Retainer Ring
    Stallard Chassis Sprint 1/4 Inch Set Screw Shaft Collar/Retainer Ring
    x
                

    These Stallard shaft collar retainer rings are designed for use on steering shafts and sway bars.

    Micro Sprint Set Screw Collar

    • 1/4" I.D.
    • 1/2" O.D.
    • Throttle rod stop collar
  • Easy Release Snap Fasteners
    $3.99
    Product Rating: 5.00 Stars
    Easy Release Snap Fasteners
    x
                Perfect hold down for access doors and panels. Bag of four.  
            
  • Valve Cover Studs, Set of 8
    $7.99
    Product Rating: 5.00 Stars
    Valve Cover Studs, Set of 8
    x
                1/4"-20 thread, 1-1/2" long studs come with nylocks and washers. Set of 8 are included.
            
  • Steel Jam Nuts, 3/4 Inch-16 NF Fine Thread, Pack/6
    Steel Jam Nuts, 3/4 Inch-16 NF Fine Thread, Pack/6
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium steel (zinc-coated for corrosion prevention), and they're available with either right hand or left hand threads.

    These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 3/4 Inch-16 NF Fine Thread
    • Sold in bags of six nuts.
    • Choose left or right thread.
  • Standard Windshield Wing Nut, Chrome
    Standard Windshield Wing Nut, Chrome
    x
                

    Fits Model T - 1936 Ford roadsters. Fits 3/8" UNF stud.

    Windshield Mount Guide (GIF)

  • Billet Aluminum Spark Plug Wire Linear Dividers, Ball Milled
    Billet Aluminum Spark Plug Wire Linear Dividers, Ball Milled
    x
                These billet spark plug wire guides offer a clean alternative to the ignition  wire dilemma by routing the wires in a simple straight-forward fashion. Their  aluminum construction features a polished finish that will make your motor stand out while keeping the  wires safely off the hot exhaust. They are a universal fit and should work with most Ford, GM, and Mopar V-8 engines. These billet wire looms feature adjustable tabs that attach to the base of the valve covers with their  mounting bolts.  Use up to 8mm wire on nearly any V8 engine.
    • Internal grooves conceal and divide spark plug wires up to 8 MM in diameter
    • Adjustable mounting tabs allow installation on nearly any V8 engine
    • Polished aluminum
    • Smooth design
  • OEM Style Ford Tapered Nuts for Front Spring Perch
    OEM Style Ford Tapered Nuts for Front Spring Perch
    x
                Axle perch nut for 1928-1948 Ford style front axle perches. 5/8"-18 tapered castle nut.
            
  • Swedged Aluminum Throttle Linkage Tubes, 3/16 Inch (10-32) Thread
    Swedged Aluminum Throttle Linkage Tubes, 3/16 Inch (10-32) Thread
    x
                

    This swedged throttle linkage tubing is tapped 3/16" (10-32) LH and RH thread. One end of the throttle rod will have left hand threads, and the other end will have right hand threads. Made of 5/16" x 0.049 round aluminum tubing.

    Note: When measuring for your tube length, you will want to allow 1.5" in length for the rod ends (3/4" of length for each end when calculating your eye-to-eye measurement. For instance, an eye-to-eye length of 11.5" would require a 10" swedged tube.

  • HDPE Sealing Washers for Bulkhead Fittings
    HDPE Sealing Washers for Bulkhead Fittings
    x
                

    Use these HDPE (High Density Polyethylene) washers to seal bulkhead fittings to fuel cells, oil tanks and other low pressure situations. Order by AN size needed.

    Fitting Thread Application Chart (GIF)

  • Split Wire Loom Conduit Tubing, 1/4 Inch Diameter, 20 Ft. Long
    Split Wire Loom Conduit Tubing, 1/4 Inch Diameter, 20 Ft. Long
    x
                

    This plastic split wire loom allows you to clean up that ugly wiring under the hood for a more professional look. This tubing will group and protect your wires from damage.  Simply lay out and insert wires, which will remain inside even with flex.  Choose from 5 colors to customize your engine bay: black, dark blue, purple, red, or yellow. 

    • 20 ft. long
    • 1/4" diameter
    • Plastic split conduit
    • More professional appearance
    • Groups and protects wires against damage 
    • Retains wires under flex and adjustment
    • Comes with zip-ties to secure wire loom
    • Choose: black, dark blue, purple, red, or yellow
  • Small Aluminum Tru-Rivets, 3/16 Inch
    From: $8.99
    Small Aluminum Tru-Rivets, 3/16 Inch
    x
                
    • 3/16" aluminum pop rivet, steel shank, 1/4-3/8" grip range
    • Available in red, white, pepsi blue, chevron blue, yellow, black, orange, and plain
  • Stainless Steel Double Adjuster, 5/8-18 Threads, 4-1/4 Inch Length
    Stainless Steel Double Adjuster, 5/8-18 Threads, 4-1/4 Inch Length
    x
                These stainless steel double adjusters can be used with female rod ends to build tie rods or other components. 1-3/4" long on each side, with 5/8"-18 LH and RH threads. 3/4" width across the flats.
            
  • Safety Wire Twister Plier Tool, 6 Inch
    Safety Wire Twister Plier Tool, 6 Inch
    x
                Precision-made safety wire pliers for quick wiring. Clamp jaws over wire end, pull knurled twister. Positive locking spring loaded handles.
            
  • AN Fitting Cap Economy Pack
    $15.99
    AN Fitting Cap Economy Pack
    x
                

    These AN fitting caps have always been hard-to-find items. Caps are used when sealing spare race engines against dirt and water during transportation and storage.

    Each cap is reusable. Use on oil, fuel, or coolant lines. Four caps per package.

    Economy packs contain one five pack of AN4, AN6, AN8, AN10 and AN12.

     

  • Tube Seal End, Chrome, -6 AN, 5/8 Inch I/D
    Tube Seal End, Chrome, -6 AN, 5/8 Inch I/D
    x
                Tube seal ends are designed for street applications. Connect stainless  hose to outlet with low pressure indicator (not exceeding 50 psi when  using AN hose size 4-12 and under 25 psi with sizes 16-32).
            
  • Aluminum Allen Pipe Plugs, 1/2 Inch NPT
    Aluminum Allen Pipe Plugs, 1/2 Inch NPT
    x
                

    Allen pipe plugs are precision machined to ensure precise thread engagement. These lightweight aluminum plug fittings are designed to match up with all performance hose and hose ends. Blue anodized finish.

    AN Thread Sizing Guide (GIF)

    Fitting Thread Application Chart (GIF)

  • Goodridge SS902-07 Stat-O-Seal Sealing Washer, -4 AN
    Goodridge SS902-07 Stat-O-Seal Sealing Washer, -4 AN
    x
                

    Goodridge Stat-O-Seals are the best sealing washers available. Synthetic rubber O-ring bonded to an aluminum crush washer. Provides the advantages of an O-ring seal, but with the ease of fittings. Will withstand temperatures from -85°F to 450°F.

    AN Fitting Thread Chart (GIF)

  • Door Wiring Loom Conduit Kit
    $79.99
    Product Rating: 4.50 Stars
    Door Wiring Loom Conduit Kit
    x
                

    These looms go between the door and door jam and allow you to run wires or cables through them. Made of Teflon lined stainless steel braided hose with double adjustable billet aluminum ends.

    910-69270 Instructions (PDF)

  • Small Head 3/16 Inch Exploding Rivets
    Small Head 3/16 Inch Exploding Rivets
    x
                

    Ok, they don’t really explode, but the back side splits into folds so you don’t normally need to use a back-up washer with them. They work great where it’s hard to reach the back side. Choose small or large head and the color of your choice. Plain, Black, White, Red, Orange, Yellow, Pepsi (light) Blue or Chevron (dark) Blue.

    • Box of 250
    • Small head is 3/8 O.D.
    • Aluminum pop rivet with aluminum shank

    Color Chart (GIF)

  • Mag Daddy 1 Inch Large Cable Daddy Magnetic Wire/Cable Fasteners, 4-Pack
    Mag Daddy 1 Inch Large Cable Daddy Magnetic Wire/Cable Fasteners, 4-Pack
    x
                These large Mag Daddy™ fasteners are designed to hold up to 20 unshielded Cat 5 Cables.  Rated at 22 lbs., these black fasteners feature a magnetic bond for easy installation and removal without the use of screws, wires, or zip-ties.
    • Easy Installation
    • Plastic lasts 20x longer than Nylon 6.6
    • Rotates 360°
    • Reusable
    • Take wires in and out
    • Sold in sets of 4 

    Suggested locations for use: Steel, Beams, Purlins, Ceiling Decks, Drop Ceiling Channels, Metal Joists, Frame Rail, Screw Heads, Metal Washer, etc.

    91033241 Cable Daddy Information/Instructions (PDF) 

  • Garage Sale - Premium 14 Inch Tie Wraps
    Garage Sale
    Garage Sale - Premium 14 Inch Tie Wraps
    x
                

    High quality wire ties available in black, blue, and red.  These are extra strong 14 inch long ties that are packaged of 100. 

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Aluminum Flare Fitting Cap, Blue, -8 AN
    Aluminum Flare Fitting Cap, Blue, -8 AN
    x
                

    Aluminum caps to seal 37° flare AN male fittings. Blue anodized finish.

    Fitting Thread Application Chart (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5 6 7