Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop T-Bucket Hardware At Speedway Motors

Let Speedway Motors help you assemble your T-Bucket project the correct way with the right fasteners and hardware. With various sizes and styles of rivets, nuts, bolts, and tie wraps, Speedway Motors is sure to have what need for your T-Bucket project needs.

Featured Products
Tru Rivets, 3/16 Inch Large Head
From: $9.99
Product Rating: 4.47 Stars
Tru Rivets, 3/16 Inch Large Head
SKU-91004
x
            Large head 3/16" aluminum pop rivets with steel shank. 1/4" to 3/8" grip range. Available in red, white, pepsi (light) blue, chevron blue, yellow, black, and orange. Box of 250.
        
Plain Steel Sleeves for 5/8 Inch Rod Ends
Plain Steel Sleeves for 5/8 Inch Rod Ends
SKU-91631
x
            

If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths along with custom, made-to-order lengths. Measurements are in assembled eye-to-eye lengths.

To order:

  1. Use guide below to measure your finished length.
  2. The part number and length you order will be 3" longer than the sleeve you receive. (I.E., if you order a 48" part number, you will receive a 45" long sleeve.) This is the difference in length required to give you the correct finished center-to-center measurement.
  3. All sleeves will have internal RH thread in one end and LH thread in the other.

Measuring Guide for Tie Rod/Drag Link (GIF)

Large Head 3/16 Inch Exploding Rivets
Large Head 3/16 Inch Exploding Rivets
SKU-910049
x
            

Ok, they don’t really explode, but the back side splits into folds so you don’t normally need to use a back-up washer with them. They work great where it’s hard to reach the back side. Choose small or large head and the color of your choice. Plain, Black, White, Red, Orange, Yellow, Pepsi (light) Blue or Chevron (dark) Blue.

  • Box of 250
  • Large head is 5/8 O.D.
  • Aluminum pop rivet with aluminum shank

Color Chart (GIF)

Small Head 3/16 Inch Exploding Rivets
Small Head 3/16 Inch Exploding Rivets
SKU-910044
x
            

Ok, they don’t really explode, but the back side splits into folds so you don’t normally need to use a back-up washer with them. They work great where it’s hard to reach the back side. Choose small or large head and the color of your choice. Plain, Black, White, Red, Orange, Yellow, Pepsi (light) Blue or Chevron (dark) Blue.

  • Box of 250
  • Small head is 3/8 O.D.
  • Aluminum pop rivet with aluminum shank

Color Chart (GIF)

"T-Bucket, Fasteners and Hardware" Page 1 of 6

  • 1949-53 Flathead Stainless Steel Spark Plug Wire Looms
    1949-53 Flathead Stainless Steel Spark Plug Wire Looms
    SKU-91612002
    x
                

    Polished stainless steel tubes accommodate wires up to 7 mm. Attaches to intake manifold of 1949-1953 flathead Ford V8's. Will not work with oil fill/vent tube on '49-'53 engines without modification (may use '48-older vent/fill which was part of the fuel pump stand).

  • CON2R 7-002 Chrome Wing Nut, 1/4-20 Thread, 2-1/4 Across, 1-1/2 Tall
    CON2R 7-002 Chrome Wing Nut, 1/4-20 Thread, 2-1/4 Across, 1-1/2 Tall
    SKU-910322
    x
                

    This wing nut is for-sure an attention getter. Perfect topper for the air cleaner on a big four barrel, on top of your tri-power pots or an accent piece wherever you need it.

  • Zip Tie Wraps, Stainless Steel Tooth, Black, 100 per Bag
    Zip Tie Wraps, Stainless Steel Tooth, Black, 100 per Bag
    SKU-940048
    x
                

    These zip ties are made in the U.S.A. and feature a stainless steel securing tooth. They come 100 to a package and are perfect for securing loose wiring and hoses or can help serve as temporary fixes to many odd jobs and projects.

    • Stainless Tooth Tie Wraps feature super strong self-locking, stainless steel tooth, one piece design, standard size head.
    • Black Tie Wraps are UV resistant. Recommended for outdoor usage.
    • Metal Detectable
    • Temperature Ratings 185 F / 85 C.
    • UL Flame Rating 94V-2.
    • Minimum installation temperature is greater than 32 F or 0 C.
    • Made From Nylon 6/6.
    • Choose from lengths of 4", 5.5", 7.3", and 11.4"
    • 100 per Bag
  • Mag Daddy 3/4 Inch Medium Cable Daddy Magnetic Wire Fasteners, 5-Pack
    Mag Daddy 3/4 Inch Medium Cable Daddy Magnetic Wire Fasteners, 5-Pack
    SKU-91033243
    x
                These medium Mag Daddy™ fasteners are designed to hold up to 10  unshielded Cat 5 Cables.  Rated at 16 lbs., these black fasteners  feature a magnetic bond for easy installation and removal without the  use of screws, wires, or zip-ties.
    • Easy Installation
    • Plastic lasts 20x longer than Nylon 6.6
    • Rotates 360°
    • Reusable
    • Take wires in and out
    • Sold in sets of 5 

    Suggested locations for use: Steel, Beams, Purlins, Ceiling Decks, Drop Ceiling Channels, Metal Joists, Frame Rail, Screw Heads, Metal Washer, etc.

    91033243 Cable Daddy Information/Instructions (PDF) 

  • Speed Fast Stainless Safety Wire, .032 Inch
    Speed Fast Stainless Safety Wire, .032 Inch
    SKU-91089407
    x
                Speed Fast 304 stainless steel safety wire. Sold in one pound rolls and comes with a handy belt clip.
            
  • Quik-Latch Products QL-25-SP Mini Quick-Latch, Polished Aluminum
    Quik-Latch Products QL-25-SP Mini Quick-Latch, Polished Aluminum
    SKU-91007156
    x
                

    These small latches can be used for multi-purpose quick release latching. Center release button stays in the down position until re-latched. Each latch body has a 1-1/4" O.D. and is supplied with one mounting stud, two threaded nuts, and two washers. Mounting cup (sold seperately) is used to mount the stud underneath the panel. Mounting cup can be easily riveted or bolted to the back side of any panel.

    • Diameter of Latch Body:  1.23"
    • Length of Latch Body:  0.57"
    • 1/4"-20 Thread
    • Length of Mounting Stud:  2.13"

    Works great for:

    • T-Bucket bed covers
    • Hood pins
    • Deck lids
    • Air cleaner stud
    • Removeable body panels
  • Mag Daddy 1/2 In Large Cable Daddy Magnetic Wire/Cable Fasteners
    Mag Daddy 1/2 In Large Cable Daddy Magnetic Wire/Cable Fasteners
    SKU-91062423
    x
                Mag Daddy Cable-Daddy™ fasteners are designed to  easily secure all wires and cables in a variety of environments. These  magnetic fasteners adhere to most all metal surfaces with an absurd 23  lbs. of retention force! Mag Daddy Cable-Daddy™ fasteners are the best  solution to wire and cable management. They're offered in a choice of  three sizes to meet your requirements. Whether you need to hold a brake  line in place or quickly organize wires or cables, Mad Daddy Cable-Daddy™  fasteners are the perfect fix.
    • Black rectangular cable hold-down
    • 23 lbs. of retention force
    • Magnet base is 26mm x 11mm with a total height of 18.5mm
    • Holds up to 20 unshielded Cat 5 Cables
    • Easy Installation
    • Plastic lasts 20x longer than Nylon 6.6
    • Ability to Rotate 360°
    • Re-usability
    • Take in and out wires
    • Sold in packs of 5

    Locations: Steel, Beams, Purlins, Ceiling Decks, Drop Ceiling Channels, Metal Joists, Frame Rail, Screw Heads, Metal Washer, etc.

    91062423 Cable Daddy Information/Instructions (PDF)

  • Tire Grinding Disc, 7 Inch Nail Head
    Tire Grinding Disc, 7 Inch Nail Head
    SKU-91082081
    x
                
    • 7" diameter
    • Nail head design
    • Very aggressive, check sanctioning body rules before use

    NOTE: Use extreme caution - serious injury can result from the use of discs. When powered by a buffer, these discs can cut your arm or leg off.

    • Never use in a loose tire
    • Never use on a tire that is not inflated and fastened
    • Do not use while wearing loose fitted clothing
    • Use eye and face protection
  • Tube Seal End, Red Anodized, -24 AN, 1-7/8 Inch I/D
    Tube Seal End, Red Anodized, -24 AN, 1-7/8 Inch I/D
    SKU-6172023
    x
                Tube seal ends are designed for street applications. Connect stainless  hose to outlet with low pressure indicator (not exceeding 50 psi when  using AN hose size 4-12 and under 25 psi with sizes 16-32).
            
  • Aluminum Allen Pipe Plugs, 1/4 Inch NPT
    Aluminum Allen Pipe Plugs, 1/4 Inch NPT
    SKU-6176204
    x
                

    Allen pipe plugs are precision machined to ensure precise thread engagement. These lightweight aluminum plug fittings are designed to match up with all performance hose and hose ends. Blue anodized finish.

    AN Thread Sizing Guide (GIF)

    Fitting Thread Application Chart (GIF)

  • Tube Seal End, Chrome, -20 AN, 1-5/8 Inch I/D
    Tube Seal End, Chrome, -20 AN, 1-5/8 Inch I/D
    SKU-6172222
    x
                Tube seal ends are designed for street applications. Connect stainless  hose to outlet with low pressure indicator (not exceeding 50 psi when  using AN hose size 4-12 and under 25 psi with sizes 16-32).
            
  • AFCO 80745 Twister Pliers
    $49.99
    $50.99
    AFCO 80745 Twister Pliers
    SKU-10680745
    x
                
    • Utilizes end bearing for faster, smoother twisting
    • Great for use in small areas where a second pull is required
  • Tri-Bar Wing Nut, Chrome
    $1.99
    Tri-Bar Wing Nut, Chrome
    SKU-9102179
    x
                

    Wing nut is approximately 5/8” tall with 1/4"-20 threads.

  • Russell Performance 662071 Endura Finish Aluminum Pipe Plug-3/4 In NPT
    Russell Performance 662071 Endura Finish Aluminum Pipe Plug-3/4 In NPT
    SKU-61766207
    x
                

    Don't you just hate it when you have a polished intake or water pump and the only pipe plugs you can find are blue or steel? These Allen head aluminum plugs from Russell Performance have a durable anodized Endura finish.

    Fitting Thread Application Chart (GIF)

  • Plain Steel Sleeve for 5/8 Inch Rod Ends, Custom Length
    Plain Steel Sleeve for 5/8 Inch Rod Ends, Custom Length
    SKU-91631-999
    x
                

    If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths along with custom, made-to-order lengths. Measurements are in assembled eye-to-eye lengths.

    To order:

    1. Use guide below to measure your finished length.
    2. The part number and length you order will be 3" longer than the sleeve you receive. (I.E., if you order a 48" part number, you will receive a 45" long sleeve.) This is the difference in length required to give you the correct finished center-to-center measurement.
    3. All sleeves will have internal RH thread in one end and LH thread in the other.

    Measuring Guide for Tie Rod/Drag Link (GIF)

  • Male Bullet Connectors, 16-14 Gauge
    Male Bullet Connectors, 16-14 Gauge
    SKU-91055670
    x
                Secure loose/spliced wire ends to each other with these bullet connectors. 
    • Works with 16-14 gauge wire
    • Comes in a package of 100
  • Black Aluminum Jam Nuts, 5/16-24 Thread, 12 Pack
    Black Aluminum Jam Nuts, 5/16-24 Thread, 12 Pack
    SKU-3159496
    x
                
    These jam nuts are made of 7075 aluminum alloy and are black anodized for corrosion resistance.
    • Fine thread for use with rod ends, heim joints, and clevis
    • Includes (6) RH and (6) LH threaded jam nuts
    • 5/16-24 Thread
    • 3/8" hex
    • Pack of 12
  • Black Aluminum Jam Nuts, 1/4-28 Thread, 12 Pack
    Black Aluminum Jam Nuts, 1/4-28 Thread, 12 Pack
    SKU-3159495
    x
                
    These jam nuts are made of 7075 aluminum alloy and are black anodized for corrosion resistance.
    • Fine thread for use with rod ends, heim joints, and clevis
    • Includes (6) RH and (6) LH threaded jam nuts
    • 1/4-28 Thread
    • 3/8" hex
    • Pack of 12
  • HRP HRP6997 Mule Axle Rack Combo
    HRP HRP6997 Mule Axle Rack Combo
    SKU-9406997
    x
                
    • Each set comes with 4 tube clamps
    • Mounts on front of mule, adjustable and easily removed
    • Aluminum construction
    • Powdercoated black
    • Set contains 2 brackets
  • Tube Seal End, Chrome, -10 AN, 13/16 Inch I/D
    Tube Seal End, Chrome, -10 AN, 13/16 Inch I/D
    SKU-6172219
    x
                Tube seal ends are designed for street applications. Connect stainless  hose to outlet with low pressure indicator (not exceeding 50 psi when  using AN hose size 4-12 and under 25 psi with sizes 16-32).
            
  • Aluminum Flare Fitting Cap, Blue, -8 AN
    Aluminum Flare Fitting Cap, Blue, -8 AN
    SKU-6176197
    x
                

    Aluminum caps to seal 37° flare AN male fittings. Blue anodized finish.

    Fitting Thread Application Chart (GIF)

  • 3/16 Inch Back Up Washers
    $8.99
    3/16 Inch Back Up Washers
    SKU-91004000
    x
                Use with our pop rivets for added strength. 3/16" aluminum. Box of 500. 
            
  • Male Aluminum 37 Degree AN Flare Weld Bung Fitting, -8 AN
    Male Aluminum 37 Degree AN Flare Weld Bung Fitting, -8 AN
    SKU-6177208
    x
                We offer these premium-quality weld-in bungs for a variety of uses.     They're CNC-machined from solid aluminum  and are great for oil or fuel  tanks,   radiators, valve covers, manifolds,  and rear axle housings.  

    Aluminum male 37° AN flare weld bung fitting.

    • -8 AN
    • Aluminum

    Fitting Thread Application Chart (GIF)

     

  • Mag Daddy Large Zip-Daddy Magnetic Cable/Wire Fasteners, 23lb, 5-Pack
    Mag Daddy Large Zip-Daddy Magnetic Cable/Wire Fasteners, 23lb, 5-Pack
    SKU-91062422
    x
                Mag Daddy Zip-Daddys™ are designed to eliminate the problem of pesky tangled wires. These magnetic fasteners can be used again and again to hold up wires and cables in hard-to-reach areas, ending the hunt for places to zip-tie your wires! Mag Daddy Zip-Daddy™ fasteners contain a number of wires, as well as bundles.
    • Black rectangular zip wire hold-down
    • 23 lbs. of retention force
    • Magnet base is 26mm x 11mm with a total height of 10.5mm
    • Holds Standard Zip Ties
    • Easy Installation
    • Ability to Rotate 360 Degrees
    • Plastic Lasts 20x longer than Nylon 6.6
    • Reusable
    • Sold in packs of 5

    Locations: Steel, Beams, Purlins, Ceiling Decks, Drop Ceiling Channels, Metal Joists, Frame Rail, Screw Heads, Metal Washer, etc.

    91062422 Zip Daddy Information/Instructions (PDF)

  • Tube Seal End, Red Anodized, -10 AN, 7/8 Inch I/D
    Tube Seal End, Red Anodized, -10 AN, 7/8 Inch I/D
    SKU-6172019
    x
                Tube seal ends are designed for street applications. Connect stainless  hose to outlet with low pressure indicator (not exceeding 50 psi when  using AN hose size 4-12 and under 25 psi with sizes 16-32).
            
  • JAZ Products 720-000-01 Engine Stand Drip Tray
    JAZ Products 720-000-01 Engine Stand Drip Tray
    SKU-4587200
    x
                
    • Helps keep your shop floor clean during engine disassembly
    • Designed to fit most three and four leg engine stands 
    • Made from durable black plastic for long service 
    • Cleans easily with soap and water or in a solvent tank 
    • Big enough to catch debris from a big block 
    • Small enough to stay out of your way
  • Billet Aluminum Spark Plug Wire Linear Dividers, Ball Milled
    Billet Aluminum Spark Plug Wire Linear Dividers, Ball Milled
    SKU-91061040
    x
                These billet spark plug wire guides offer a clean alternative to the ignition  wire dilemma by routing the wires in a simple straight-forward fashion. Their  aluminum construction features a polished finish that will make your motor stand out while keeping the  wires safely off the hot exhaust. They are a universal fit and should work with most Ford, GM, and Mopar V-8 engines. These billet wire looms feature adjustable tabs that attach to the base of the valve covers with their  mounting bolts.  Use up to 8mm wire on nearly any V8 engine.
    • Internal grooves conceal and divide spark plug wires up to 8 MM in diameter
    • Adjustable mounting tabs allow installation on nearly any V8 engine
    • Polished aluminum
    • Smooth design
  • Goodridge 936-08DCH Tube Seal End, Chrome, -8 AN, 11/16 Inch I/D
    Goodridge 936-08DCH Tube Seal End, Chrome, -8 AN, 11/16 Inch I/D
    SKU-6172227
    x
                Tube seal ends are designed for street applications. Connect stainless  hose to outlet with low pressure indicator (not exceeding 50 psi when  using AN hose size 4-12 and under 25 psi with sizes 16-32).
            
  • Fully Insulated Male Connectors, 16-14 Gauge
    Fully Insulated Male Connectors, 16-14 Gauge
    SKU-91055672
    x
                Secure loose/spliced wire ends to each other with these connectors. 
    • Fully insulated push-on terminals
    • Works with 16-14 gauge wire
    • Comes in a package of 100
  • Black Aluminum Jam Nuts, 10-32 Thread, 12 Pack
    Black Aluminum Jam Nuts, 10-32 Thread, 12 Pack
    SKU-3159494
    x
                
    These jam nuts are made of 7075 aluminum alloy and are black anodized for corrosion resistance.
    • Fine thread for use with rod ends, heim joints, and clevis
    • Includes (6) RH and (6) LH threaded jam nuts
    • 10-32 Thread
    • 3/8" hex
    • Pack of 12
  • Safety Wire Twister Plier Tool, 9 Inch
    Safety Wire Twister Plier Tool, 9 Inch
    SKU-91089405
    x
                Precision-made safety wire pliers for quick wiring. Clamp jaws over wire end, pull knurled twister. Positive locking spring loaded handles.
            
  • Goodridge SS902-12 Stat-O-Seal Sealing Washers, -8 AN
    Goodridge SS902-12 Stat-O-Seal Sealing Washers, -8 AN
    SKU-6179063
    x
                

    Goodridge Stat-O-Seals are the best sealing washers available. Synthetic rubber O-ring bonded to an aluminum crush washer. Provides the advantages of an O-ring seal, but with the ease of fittings. Will withstand temperatures from -85°F to 450°F.

    AN Fitting Thread Chart (GIF)

  • Steel Jam Nut, 3/8 Inch-24 Fine Thread, Zinc Coated
    Steel Jam Nut, 3/8 Inch-24 Fine Thread, Zinc Coated
    SKU-1750243
    x
                

    If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium quality steel (zinc-coated for corrosion prevention), and they're available with right hand threads.

    These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

    • 3/8 Inch-24 RH NF Fine Thread
    • Available in right hand thread.
    • Works with -3 AN bulkhead tee adapter brake fittings
  • Universal Drive Shaft U-Bolts, 1-1/8 Inch Cap
    Universal Drive Shaft U-Bolts, 1-1/8 Inch Cap
    SKU-91048314
    x
                Speedway universal driveshaft U-bolts are forged steel for 50% more strength than standard units. Fits U-joints with 1-1/8" diameter caps.
            
  • Painless Wiring 10308 18 Circuit Modular Wiring Harness
    Painless Wiring 10308 18 Circuit Modular Wiring Harness
    SKU-91010308
    x
                

    Designed for those with a T-Bucket or Roadster with minimized needs. This compact, streamlined, simple to install harness has all the basic circuitry needs: headlights, tail lights, brake lights, turn signals, hazards, horn, gauges, wipers, radio, electric fan, electric choke and one accessory circuit. Each wire is color-coded and printed the entire length for ease of installation. As an added plus, the fuse block is modular so if you decide at some point to add additional accessories to your bucket, you can easily snap another four circuits into place. Also included are connectors to GM/Ididit/Flaming River Columns for ignition switch and turn signals and a heavy-duty lead for a high-output alternator.

    This wiring harness is just a nice simple basic harness that will work well in a variety of vehicles. It’s for “minimalist” vehicles with no power windows, no power door locks, no power seats... just the basics. Works well in any of the Speedway kit cars.

    18 Circuit Modular T-Bucket Wiring Instructions (PDF)

  • Speedway 1985-89 Tuned Port Mass Air Engine Harness
    Speedway 1985-89 Tuned Port Mass Air Engine Harness
    SKU-91008589
    x
                

    Take the fear out of electronic fuel injection! These engine wiring harnesses are designed to make your engine transplant effortless. Each new harness contains in-depth application-specific instruction sheets, clearly marked factory GM connectors, labeled GXL jacketed wire, GM color coding, and pre-fitted corrugated slit loom for an extra value and professional look. All un-needed emissions wiring is eliminated to make the install as simple and reliable as possible.

    • Made from premium grade GXL jacketed automotive wire
    • Most wiring is larger gauge than stock application for durability
    • No splices to reduce points of failure
    • All primary grounding is done at the head or block and grounding points are isolated from each other to reduce electrical interference and minimize ground looping
    • Harness wiring matches GM wiring configuration and jacket colors follow GM color coding for easy identification
    • All electrical connectors are made by Delphi or Packard and are direct fit for GM cars and trucks
    • OBD1 diagnostic port for connection to scanners and tuning tools
    • Made in the USA.
Goto Previous PagePrevious Page
1 2 3 4 5 6