Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop T-Bucket Headers & Exhaust At Speedway Motors

Now that your T-Bucket has the cool look you love, give it the great sound you love too! Speedway Motors has the T-Bucket headers and mufflers you need, at a price you can afford! Check out our huge inventory of chassis headers, roadster headers, lake-style headers and tight-fit block hugger headers, all available in chrome, stainless steel, or with durable ceramic AHC coating. With an awesome selection of performance mufflers, glasspacks, exhaust bends, and exhaust tips, Speedway Motors is your exhaust superstore!

"T-Bucket, Exhaust Headers" Page 1 of 11

  • Big Block Chevy, Block Hugger, Tight-Fit Headers, AHC Coated
    Big Block Chevy, Block Hugger, Tight-Fit Headers, AHC Coated
    x
                

    Rodders and racers are known for wedging big engines into small spaces, so these big-block Chevy shorty headers are designed for applications where space is limited. They offer great flow in a compact package and will fit where many other headers won’t. These block hugger headers make difficult installations easy. These shorty headers are ceramic coated headers.

    • Fits round-port cylinder heads
    • Compact design fits a wide variety of applications
    • Made from 16-gauge tubing
    • Includes reducers, gaskets, and bolts
    • 1-3/4” primary tube diameter
    • 2-1/2” collector diameter
    • Can be used with most oil filter systems and transmission/starter combinations
    • Will not fit '55-'57 Chevy cars, Camaros, or other modern vehicles which have a crossmember below the engine's center two exhaust ports
    • Fits standard deck big blocks only

    Header Dimesnions (GIF)

  • Dynatech Plain Steel Slip-On Collector, 2-1/8 x 3-1/2 x 8 Inch
    Dynatech Plain Steel Slip-On Collector, 2-1/8 x 3-1/2 x 8 Inch
    x
                Dynatech® slip-on race collectors offer great performance at an affordable  price. Changing  collector outlet size or length are popular ways to make tuning adjustments as  track conditions change (i.e. changing to a larger collector outlet size can aid  in "slick track" conditions).  
    • Race-ready to bolt on right out of the box
    • U-tabs are a direct bolt-on fit to all Dynatech® Drag Headers
    • Hi-temp black paint
    • Long-transition 4-into-1 design for maximum power
    • Listed by Primary I.D. x Collector O.D. x Length
    • Sold individually

    Note: O2 bung not included.

  • Hot Stuff Exhaust Manifold Dressing
    Hot Stuff Exhaust Manifold Dressing
    x
                Hot Stuff is more than just ordinary header paint. This space-age blend of stainless steel and ceramic compounds is the ideal coating for cast iron exhaust manifolds! It withstands 2400F° (manifolds rarely exceed 1200°F). Only minimal preparation is required. Easily applied with a small brush or a rag. Coating heat-cures by simply running the engine for 10 minutes. Leaves a durable, raw cast iron appearance.

    A 2 oz. container will do 2-4 exhaust manifolds on average. Not recommended for tube steel headers.

  • Dynatech Ceramic Coated Slip-On Collector, 2-3/8 x 4 x 12 Inch
    Dynatech Ceramic Coated Slip-On Collector, 2-3/8 x 4 x 12 Inch
    x
                

    Dynatech® slip-on race collectors offer great performance at an affordable price. Changing collector outlet size or length are popular ways to make tuning adjustments as track conditions change (i.e. changing to a larger collector outlet size can aid in "slick track" conditions).

    • Direct bolt-on fit to all Dynatech® Drag Headers
    • Durable Ceramic coating
    • Long-transition 4-into-1 design for maximum power
    • 18mm accessory bung (see Notes)
    • Listed by Primary I.D. x Collector O.D. x Length
    • Sold individually
  • Dynatech 730-10010 Stainless Steel Tight-Fit, Block Hugger Headers
    Dynatech 730-10010 Stainless Steel Tight-Fit, Block Hugger Headers
    x
                Please view the product's page for more information
            
  • Big Block Chevy Lake Style Headers, Stainless Steel
    Big Block Chevy Lake Style Headers, Stainless Steel
    x
                Please view the product's page for more information
            
  • Big Block Chevy Tight-Fit, Block Hugger Headers, Chrome
    Big Block Chevy Tight-Fit, Block Hugger Headers, Chrome
    x
                

    Rodders and racers are known for wedging big engines into small spaces, so these big-block Chevy tight-fit headers are designed for applications where space is limited. They offer great flow in a compact package and will fit where many other headers won’t. These shorty headers make difficult installations easy.

    • Fits round-port cylinder heads
    • Compact design fits a wide variety of applications
    • Made from 16-gauge tubing
    • Includes reducers, gaskets, and bolts
    • 1-3/4” primary tube diameter
    • 2-1/2” collector diameter
    • Can be used with most oil filter systems and transmission/starter combinations
    • Will not fit '55-'57 Chevy cars, Camaros, or other modern vehicles which have a crossmember below the engine's center two exhaust ports
    • Fits standard deck big blocks only

    Header Dimensions (GIF)

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

  • Small Block Ford 289-351W Lake Style Headers, AHC Coated
    Small Block Ford 289-351W Lake Style Headers, AHC Coated
    x
                

    Nostalgia-style street rods are hotter than ever, and nothing gives your vintage rod that authentic dry lakes competition look like a set of lakester headers. The small-block Ford lake header works great on early hoodless and fenderless rods like T-buckets, Model A's, and 1932-1934 Fords. The headers have vertical flanges so you can connect them to a muffled under-car exhaust when the end plates are on.  

    • Fits SBF 289-351W V8 and type "P" cylinder heads.
    • Hookups provided for under-chassis exhaust
    • Block-off plate allows you to easily uncork headers
    • 1-5/8" primary tube diameter
    • 3-1/2" collector cone diameter
    • AHC ceramic coated finish

    Header Dimensions (GIF)

    NOTE: Turn-outs NOT included. Headers come with end plates, but the turn outs are sold seperately.

  • Small Block Chevy Lake Style Headers, Polished Stainless
    Small Block Chevy Lake Style Headers, Polished Stainless
    x
                Now available in polished stainless steel! Nostalgia-style street rods are hotter than ever, and nothing gives your vintage rod that authentic dry lakes competition look like a set of lakester headers. These exposed small block Chevy headers work great on rods without hoods, but we’ve also seen them peeking through carefully trimmed hood sides. Each lakester header has a flange so you can connect it to a muffled under-car exhaust when the end plate is on.
    • Fits 265-400 c.i. with standard or Vortec heads including D-port ZZ-4 style heads (not LT-1)
    • 1-5/8" primary
    • Includes flange to connect 2” exhaust pipe
    • Removable end plates allow you to run open headers with ease
    • Headers come with end plates, but the turn-outs are NOT included
    • Includes gaskets and mounting hardware
    Stainless header tubing, when exposed to exhaust temperature, will cause the finish to change color which will vary with the exhaust temperature. Please note that the finish of the header, when the engine is started, will change to a light champagne color or a darker gold finish, and in some instances, may even turn dark blue or purple. These colors can be polished out using Blue-Away or Simi-Chrome polish, but please note that when the headers reach running temperature again, they will immediately change color.
  • Small Block Chevy Classic T-Bucket Headers, AHC Coated
    Small Block Chevy Classic T-Bucket Headers, AHC Coated
    x
                

    These small-block Chevy headers have a graceful, nostalgic shape that makes them perfect for T-bucket roadsters and similar hoodless street rods. The classic appearance is backed up by quality construction and an easy-breathing design that can help unlock your engine’s performance potential. These ceramic coated headers provide superior peformance and durability.

    • Fits 265-400 c.i. Small Block Chevy V8s
    • Exhaust is routed outside the frame rail and along the side of the car
    • Fits most angle plug heads
    • Extensions and mufflers sold separately
    • Includes gaskets and bolts

    Header Dimensions (GIF)

  • Flathead Center Dump Headers, Chrome
    Flathead Center Dump Headers, Chrome
    x
                

    Now available in CHROME! Improve the performance and exhaust note of your 1932-53 flathead Ford V8 with these affordable, high-quality tubular steel headers. They have a compact center-dump design. The center-dump design will not work on Ford cars with stock wishbones.

    Includes:

    • Block gaskets
    • Collector gaskets
    • Pair of companion 2-1/2" flanges for beginning the exhaust system (companion flanges fit 2-1/2" pipe).

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

    Not legal for sale or use in California on pollution controlled vehicles

     

     

  • Header Reducer Kit, 2-1/2 to 2 Inch
    Header Reducer Kit, 2-1/2 to 2 Inch
    x
                Each mild steel reducer comes with a welded-on 3-bolt flange, gaskets and bolts.
            
  • Speedway Small Block Chevy Classic Headers, Stainless
    Speedway Small Block Chevy Classic Headers, Stainless
    x
                

    These small-block Chevy headers have a graceful, nostalgic shape that makes them perfect for T-bucket roadsters and similar hoodless street rods. The classic appearance is backed up by quality construction and an easy-breathing design that can help unlock your engine’s performance potential.

    • Polished Stainless Steel
    • Fits 265-400 c.i. Small Block Chevy V8s
    • Exhaust is routed outside the frame rail and along the side of the car
    • Fits most angle plug heads
    • Extensions and mufflers sold separately
    • Includes gaskets and bolts

    Note: Stainless header tubing when exposed to exhaust temperature will cause the finish to change color which will vary with the exhaust temperature. Please note that the finish of the header when the engine is started, will change to a light champagne color to a darker gold finish and in some instance may even turn dark blue or purple. This can be polished back out when utilizing Blue-away or Simi-chrome polish, but please note that when the headers reach running temperature again, they

  • Big Block Chevy Sprint Style Headers, Chrome
    Big Block Chevy Sprint Style Headers, Chrome
    x
                

    Modeled after headers used on sprint cars and other open-wheel racers, these big-block Chevy Sprint headers have an aggressive competition style and quality construction that makes them a popular choice for T-bucket roadsters and other early fender-less street rods. They route the exhaust outside the frame rail and along the side of the car.

    • Aggressive competition-influenced design
    • Great style for early roadsters
    • Manufactured from durable 16-gauge steel
    • Fits 396-502 standard deck blocks
    • Extensions and mufflers are sold separately

    Header Dimensions (GIF)

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

    Not legal for sale or use in California on pollution controlled vehicles

     

  • LS1 Block Hugger Tight-Fit Headers, Stainless Steel
    LS1 Block Hugger Tight-Fit Headers, Stainless Steel
    x
                

    Many rodders are looking to install Chevy’s powerful and efficient LS1 / LS6 Small Block V8 in their street rods, customs and classic trucks. These shorty headers can make those installations easier in a variety of applications, and help produce more power as well.

    An oxygen sensor bung is included with these block hugger headers, but not installed, for those who want to keep the engine’s electronic fuel injection. Includes bolts, gaskets, and reducers.

    LS1 Header Dimensions (GIF)

  • Small Block Ford Sprint Roadster Headers, Stainless Steel
    Small Block Ford Sprint Roadster Headers, Stainless Steel
    x
                
    Add a touch of class to your T roadster project with these S/B Ford sprint roadster headers. Routes the exhaust over and outside the frame rail.
    • Fits 289, 302, 351 Windsor V8.
    • Features 1-5/8" primaries and 3-1/2" collectors. 
    • Header gaskets and stainless steel header bolts are included.

    Header Dimensions (GIF)

    NOTE: Stainless header tubing when exposed to exhaust temperature will cause the finish to change color which will vary with the exhaust temperature. Please note that the finish of the header when the engine is started, will change to a light champagne color to a darker gold finish and in some instance may even turn dark blue or purple. This can be polished back out when utilizing Blue-away or Simi-chrome polish, but please note that when the headers reach running temperature again, they will immediately change color.   

  • Big Block Chevy Tight-Fit Block Hugger Headers, Stainless
    Big Block Chevy Tight-Fit Block Hugger Headers, Stainless
    x
                Please view the product's page for more information
            
  • Dynatech Ceramic Coated Slip-On Collector, 2 x 3-1/2 x 12 Inch
    Dynatech Ceramic Coated Slip-On Collector, 2 x 3-1/2 x 12 Inch
    x
                

    Dynatech® slip-on race collectors offer great performance at an affordable price. Changing collector outlet size or length are popular ways to make tuning adjustments as track conditions change (i.e. changing to a larger collector outlet size can aid in "slick track" conditions).

    • Direct bolt-on fit to all Dynatech® Drag Headers
    • Durable Ceramic coating
    • Long-transition 4-into-1 design for maximum power
    • 18mm accessory bung (see Notes)
    • Listed by Primary I.D. x Collector O.D. x Length
    • Sold individually
  • Small Block Chevy Lake Style Header Kit, 1-5/8 Tube, 3-1/2 Inch Cone
    Small Block Chevy Lake Style Header Kit, 1-5/8 Tube, 3-1/2 Inch Cone
    x
                

    Vintage style street rods are hotter than ever, and nothing gives your fenderless rod an authentic dry lakes competition look like a set of lakester headers. These lake style header kits allow you to build your own weld up headers and tailor them to your vehicle. All tubing comes pre-bent. Tapered cones can be trimmed as needed. Lakester header kit includes parts to complete both sides.

    • 5/16" thick flanges
    • 16 ga. pre-bent tubing
    • Collector flanges w/ block-off plates
    • Flanges for connecting an under-car exhaust system (2.5" O.D.)
    • Gaskets & bolts
  • Thermo Tec 12002 Hi-Heat Header Wrap Coating, Aluminum
    Thermo Tec 12002 Hi-Heat Header Wrap Coating, Aluminum
    x
                

    To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface, extend the life of wrap by protecting it from friction, and seal the pores to minimize the penetration of harmful liquids.

    The coating also works excellent as a paint directy on metal surfaces.                 

    CANNOT BE SHIPPED BY AIR!

  • Small Block Chevy Lake Style Headers, AHC Coated
    Small Block Chevy Lake Style Headers, AHC Coated
    x
                

    Nostalgia-style street rods are hotter than ever, and nothing gives your vintage rod that authentic dry lakes competition look like a set of lakester headers. The exposed small block Chevy lakester header works great on rods without hoods, but we’ve also seen them peeking through carefully trimmed hood sides. The headers have flanges so you can connect them to a muffled under-car exhaust when the end plates are on. These ceramic coated headers feature superior performance and durability.

    • Fits 265-400 c.i. with standard or Vortec heads including D-port ZZ-4 style heads (not LT-1) 
    • Includes flange to connect 2” exhaust pipe
    • Removable end plates allow you to run open headers with ease
    • Includes gaskets and mounting hardware

    NOTE: Turn-outs NOT included. Headers come with end plates (turn outs sold seperately).

    Header Dimensions (GIF)

    Lake Style Headers Diagram (GIF) 

  • Thermo Tec 11023 Header Wrap, 2 Inch x 100 Ft, Black Color
    Thermo Tec 11023 Header Wrap, 2 Inch x 100 Ft, Black Color
    x
                

    Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

    Installation Instructions (PDF)

    Typical Small Block Chevy Headers Need:

    • (2)  704-11002/11022 Wraps
    • (1)  704-13101 Strap Kit
    • (2)  70412001 High Heat Coatings

    Typical Big Block Chevy and 180 Degree Headers Need:

    • (2-3)  704-11002/11022 Wraps
    • (1)     704-13101 Strap Kit
    • (2-3)  704-12001 High Heat Coatings

     

  • Dynatech 783-21230 Plain Steel Slip-On Collector, 1-5/8 x 3 x 12 Inch
    Dynatech 783-21230 Plain Steel Slip-On Collector, 1-5/8 x 3 x 12 Inch
    x
                Dynatech® slip-on race collectors offer great performance at an affordable  price. Changing  collector outlet size or length are popular ways to make tuning adjustments as  track conditions change (i.e. changing to a larger collector outlet size can aid  in "slick track" conditions).  
    • Race-ready to bolt on right out of the box
    • U-tabs are a direct bolt-on fit to all Dynatech® Drag Headers
    • Hi-temp black paint
    • Long-transition 4-into-1 design for maximum power
    • Listed by Primary I.D. x Collector O.D. x Length
    • Sold individually

    Note: O2 bung not included.

  • Small Block Chevy Hugger Headers for Angle Plug Heads, AHC Coated
    Small Block Chevy Hugger Headers for Angle Plug Heads, AHC Coated
    x
                

    These tight-fit headers are designed to be used with standard exhaust port Small Block Chevy heads that have angle spark plugs. Features 1-5/8" primary tubes and 2-1/2" collectors with 2-1/4" outlets. Comes with bolts, gaskets and reducers. The port openings on the header are round and work fine on heads with round or rectangle ports.

    These shorty headers feature our unique AHC ceramic coating. Armor Hot Coating (AHC) is a heat resistant, ceramic coating applied to the outside of the header. This coating will reflect heat, which helps retain more heat within the header tube while simultaneously speeding up the exhaust flow. Not only will this coating help you make more horsepower, it also keeps your headers rust-free, looking great, and lasting longer (when properly maintained). If you are looking for a show-quality finish for your headers, this is it! Our AHC  ceramic coated headers will withstand exhaust temperatures of up to 1300° F.

    Header Dimensions (GIF)

  • Small Block Ford Classic Roadster Headers, Plain
    Small Block Ford Classic Roadster Headers, Plain
    x
                

    These small-block Ford headers have a classic, race-inspired shape that makes them perfect for T-bucket roadsters and similar hood-less street rods. The clean looks are backed up by quality construction and an easy-breathing design that can help unlock your Ford V8’s performance potential.

    • For early street rod applications without hood sides 
    • Routes exhaust outside the frame rail and along the side of the car
    • Manufactured from durable 16-gauge steel
    • Fits 289, 302 and 351 Windsor Ford V8s

    Header Dimensions (GIF)

  • Big Block Chevy Lake Style Header Kit, 1-7/8 Tube, 4 Inch Cone
    Big Block Chevy Lake Style Header Kit, 1-7/8 Tube, 4 Inch Cone
    x
                

    Vintage style street rods are hotter than ever, and nothing gives your fenderless rod an authentic dry lakes competition look like a set of lakester headers. These lake style header kits allow you to build your own weld up headers and tailor them to your vehicle. Lakester header kit includes parts to complete both sides.

    The kits include flange plates, pre-bent tubing, collector plates, block-off plates, gaskets, bolts and flanges for connecting an under-car exhaust system. Big block kits have 1-7/8" primaries. All tubing comes pre-bent. The 30" tapered cones can be trimmed as needed.

  • Big Block Chevy Lake Style Headers, Plain Steel Finish
    Big Block Chevy Lake Style Headers, Plain Steel Finish
    x
                

    Give your street rod a nostalgia look and help uncork its performance potential with these lakester headers for big-block Chevy V8s. The lakester header works great on early hoodless and fenderless rods like T-buckets, Model A's and 1932-1934 Fords. Vertical flanges allow you to connect the lake style headers to a muffled under-car exhaust when the end plates are on.

    • Fits 396-502 B/B Chevy
    • Hookups provided for under-chassis exhaust (2-1/2" O.D.)
    • Block-off plate allows you to easily uncork headers
    • 1-7/8" primaries, 4" collectors

    Header Dimensions (GIF)

    NOTE: Turn-outs NOT included. Headers come with end plates, but the turn outs are sold seperately.

     

  • Dynatech Ceramic Coated Slip-On Collector, 2-1/8 x 4 x 12 Inch
    Dynatech Ceramic Coated Slip-On Collector, 2-1/8 x 4 x 12 Inch
    x
                

    Dynatech® slip-on race collectors offer great performance at an affordable price. Changing collector outlet size or length are popular ways to make tuning adjustments as track conditions change (i.e. changing to a larger collector outlet size can aid in "slick track" conditions).

    • Direct bolt-on fit to all Dynatech® Drag Headers
    • Durable Ceramic coating
    • Long-transition 4-into-1 design for maximum power
    • 18mm accessory bung (see Notes)
    • Listed by Primary I.D. x Collector O.D. x Length
    • Sold individually
  • Small Block Chevy Lake Style Headers, Chrome
    Small Block Chevy Lake Style Headers, Chrome
    x
                Now available in CHROME!

    Nostalgia-style street rods are hotter than ever, and nothing gives your vintage rod that authentic dry lakes competition look like a set of lakester headers. These exposed small block Chevy headers work great on rods without hoods, but we’ve also seen them peeking through carefully trimmed hood sides. Each lakester header has a flange so you can connect it to a muffled under-car exhaust when the end plate is on.
    • Fits 265-400 c.i. with standard or Vortec heads including D-port ZZ-4 style heads (not LT-1)
    • 1-5/8" primary
    • Includes flange to connect 2” exhaust pipe
    • Removable end plates allow you to run open headers with ease
    • Includes gaskets and mounting hardware

    NOTE: Turn-outs NOT included. Headers come with end plates, but the turn outs are sold separately.

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

    Not legal for sale or use in California on pollution controlled vehicles

     

  • Tru-Ram   Small Block Chevy Exhaust Manifolds, Cast Iron
    Tru-Ram Small Block Chevy Exhaust Manifolds, Cast Iron
    x
                

    If you're looking for the power of headers, a distinctive look and the dependability of cast iron, we have the hot setup for small-block Chevys: the Tru-Ram® exhaust manifold. We started with a clean slate and designed an exhaust manifold that will give you looks and performance never before available in cast iron.

    • Provides a tight-fit for steering and clearance issues
    • Flows better than original Corvette manifolds
    • Same performance as tube headers with classic ram horn styling
    • Offers a distinctive look
    • 2-1/2" collector uses standard reducers or tight tube extensions
    • Includes mounting hardware and gaskets
    • Tru-Ram Dimension Chart (GIF)

    Header Dimension Chart

    Note: The exhaust port size is square and large enough for most round port heads. It measures 1.375" x 1.375" and should be sufficient for most small block cylinder heads. Variation in location of spark plugs on aftermarket heads makes it impossible to verify that the Tru-Ram® will fit all heads on the market, but it will clear most straight and angle plug heads.

  • Small Block Ford Sprint Roadster Headers, Chrome
    Small Block Ford Sprint Roadster Headers, Chrome
    x
                

    Add a touch of class to your T roadster project with these S/B Ford sprint roadster headers. Routes the exhaust over and outside the frame rail. Fits 289, 302, 351 Windsor V8. Features 1-5/8" primaries and 3-1/2" collectors.  Header gaskets and plain finish header bolts are included.

    Header Dimensions (GIF)

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

    Not legal for sale or use in California on pollution controlled vehicles

     

  • Dynatech Ceramic Coated Slip-On Collector, 1-7/8 x 3 x 12 Inch
    Dynatech Ceramic Coated Slip-On Collector, 1-7/8 x 3 x 12 Inch
    x
                

    Dynatech® slip-on race collectors offer great performance at an affordable price. Changing collector outlet size or length are popular ways to make tuning adjustments as track conditions change (i.e. changing to a larger collector outlet size can aid in "slick track" conditions).

    • Direct bolt-on fit to all Dynatech® Drag Headers
    • Durable Ceramic coating
    • Long-transition 4-into-1 design for maximum power
    • 18mm accessory bung (see Notes)
    • Listed by Primary I.D. x Collector O.D. x Length
    • Sold individually
  • GM LS1 Lake Style Header Kit, 1-5/8 Tube, 4 Inch Cone
    GM LS1 Lake Style Header Kit, 1-5/8 Tube, 4 Inch Cone
    x
                Vintage style street rods are hotter than ever, and nothing gives your  fenderless rod an authentic dry lakes competition look like a set of  lakester headers. These lake style header kits allow you to build your  own weld up headers and tailor them to your vehicle. Lakester header kit includes  parts to complete both sides.

    Includes flange plates, pre-bent tubing, collector plates, block-off plates, gaskets, bolts and flanges for connecting an under-car exhaust system. Small block kits use 1-5/8" primary pipes. All tubing comes pre-bent. The 30" tapered cones can be trimmed as needed.

  • Small Block Chevy Sprint Roadster Headers, Chrome
    Small Block Chevy Sprint Roadster Headers, Chrome
    x
                

    Modeled after headers used on sprint cars and other open-wheel racers, these small-block Chevy Sprint Roadster headers have an aggressive style that makes them our most popular headers for T-bucket roadsters. Designed for early street rods without hood sides, they route the exhaust over and outside the frame rail, along the side of the car.

    • Beautiful chrome plated finish
    • Fits standard or Vortec head Small Block Chevy (not D-port style heads)
    • Fits most angle plug heads
    • Extensions and mufflers are sold separately
    • 1-5/8” primary tubes
    • 3-1/2” collectors

    Header Dimensions (GIF)

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

    Not legal for sale or use in California on pollution controlled vehicles

     

  • Big Block Chevy Lake Style Headers, Chrome
    Big Block Chevy Lake Style Headers, Chrome
    x
                Please view the product's page for more information
            
  • Small Block Chevy Hugger Headers for Angle Plug Heads, Chrome
    Small Block Chevy Hugger Headers for Angle Plug Heads, Chrome
    x
                

    These tight-fit headers are designed to be used with standard exhaust port Small Block Chevy heads that have angle spark plugs. Features 1-5/8" primary tubes and 2-1/2" collectors with 2-1/4" outlets. Comes with bolts, gaskets and reducers. The port openings on the header are round and work fine on heads with round or rectangle ports.

    • Designed to be used with standard exhaust port S/B Chevy heads that have angle spark plugs
    • 1-5/8" primary tubes and 2-1/2" collectors
    • Complete with reducers, gaskets, and bolts

    Header Dimensions (GIF)

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

    Not legal for sale or use in California on pollution controlled vehicles

  • Dynatech Ceramic Coated Slip-On Collector, 2-1/8 x 3-1/2 x 12 Inch
    Dynatech Ceramic Coated Slip-On Collector, 2-1/8 x 3-1/2 x 12 Inch
    x
                

    Dynatech® slip-on race collectors offer great performance at an affordable price. Changing collector outlet size or length are popular ways to make tuning adjustments as track conditions change (i.e. changing to a larger collector outlet size can aid in "slick track" conditions).

    • Direct bolt-on fit to all Dynatech® Drag Headers
    • Durable Ceramic coating
    • Long-transition 4-into-1 design for maximum power
    • 18mm accessory bung (see Notes)
    • Listed by Primary I.D. x Collector O.D. x Length
    • Sold individually
  • Small Block Ford Block Hugger Tight-Fit Headers, Plain
    Small Block Ford Block Hugger Tight-Fit Headers, Plain
    x
                

    For years it seemed like installing a 289-302-351W Ford in your street rod was a far bigger challenge than using a small-block Chevy. One significant problem was finding compact shorty headers. Well, problem solved! These tight-fit headers are designed to hug tight against your small block Ford V8 and can make seemingly impossible installations much easier to tackle. 

    For factory style oval port heads. Will work with GT40P heads. Includes 2.5" collector reducers to 2.25" pipe, gaskets and bolts.

    • Must be used with 910-67210 (auto trans) or 910-9504 (3/8" throw manual trans) style mini starter or equivalent compact starter
    • We recommend motor mounts 270-2221 (Left) and 270-2220 (Right)
    • Left mount may need to be ground 1/4” to provide clearance for collector
    • Fits engines with forward sump oil pans

    Tight-Fit Header Instructions (PDF)

    Header Dimension Chart

     

  • Flathead Ford V8 Lake Style Headers, Plain Steel Finish
    Flathead Ford V8 Lake Style Headers, Plain Steel Finish
    x
                

    Nostalgia-style street rods are hotter than ever, and nothing gives your vintage rod that authentic dry lakes competition look like a set of lakester headers. The exposed flathead Ford V8 lakester header works great on rods without hoods, but we’ve also seen them peeking through carefully trimmed hood sides. The headers have flanges so you can connect them to a muffled under-car exhaust when the end plates are on.

    • 3-1/2" diameter x 22" long cone
    • 1-3/4" primaries
    • Includes flange to connect 2” exhaust pipe
    • Removable end plates allow you to run open headers with ease
    • Includes gaskets and mounting hardware

    NOTE: Turn-outs NOT included. Headers come with end plates, but the turn outs are sold seperately.

     

  • Flathead Center Dump Headers, Stainless
    Flathead Center Dump Headers, Stainless
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 11