Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop T-Bucket Electrical Wiring & Lights At Speedway Motors

Speedway Motors is your one stop shop for T-Bucket wiring and lighting. Make wiring your roadster simple with easy-to-use wiring harnesses and step by step instructions. Finally, finish off your T-Bucket project with specialty headlights, LED tail lights and vintage cowl lights. Let Speedway Motors eliminate any and all of your roadster electrical system problems!

Featured Products
Universal Headlight Switch With Hi/Low
Universal Headlight Switch With Hi/Low
SKU-91080154
x
            

This headlight switch has four positions. In is off, out one notch is park lights, out another notch is lows beams, and all the way out is high beams. Screw type terminals. 3/8" mounting hole.

910-80154 Instructions (PDF) 

Heavy Duty Turn Signal Switch
Heavy Duty Turn Signal Switch
SKU-91062860
x
            

For early autos not equipped with right and left turn signals. Chrome plated finish. Switch works with 6 or 12 volt systems. Includes wiring diagram. Clamps to any steering column with included stainless hose clamp. Switch has four-way flashers and does not self cancel.

You will need to purchase a three-prong flasher to use with this switch (part number 910-64046). For LED light applications, you will also need a LED dummy load resistor (part number 910-03030).

910-62860 Instructions (PDF)

Black Dietz Type Headlights, Standard Bulb
Black Dietz Type Headlights, Standard Bulb
SKU-91101008
x
            

Our universal fit Deitz-type 7" headlights feature black painted housings with chrome rings. Has a 12 volt sealed beam bulb with both high & low beams. "Drilled" mounting stud measures 1/2"-13. The pre-wired plug has 3 wires with 6" leads.

1928-1931 Ford Model A Stainless Tail Lights
1928-1931 Ford Model A Stainless Tail Lights
SKU-91127001
x
            

Polished stainless steel housing with glass lenses. An excellent replacement or addition to your Model 'A' Ford. Left tail light has lenses on the bottom to illuminate a license plate. Choose left or right. 12 volt operation.

  • 3.851" diameter
  • 3" depth
  • 3.851" height
  • 1-3/4" mount 

Wire colors:

  • Housing - Ground
  • Tail - Black
  • Stop - Green

These tail lights have two bulbs in them that are of a single filament style. 

"T-Bucket, Electrical, Lighting and Body" Page 1 of 12

  • Modern Driveline Reverse Switch Harness for GM T5, T56 Transmissions
    Modern Driveline Reverse Switch Harness for GM T5, T56 Transmissions
    SKU-91070002
    x
                

    These harnesses for transmission neutral safety switch/reverse light switches are designed for use with GM T5 and T56 transmissions.

    • Factory style
    • For GM T5 and T56 transmissions

     

  • Halogen Tail Light Bulbs, 1157 Offset Mounting Pins
    Halogen Tail Light Bulbs, 1157 Offset Mounting Pins
    SKU-91131016
    x
                

    Those other super bright, super high powered tail light bulbs may be easy to see, but they also generate enough heat to discolor your lens and burn the paint.

    Halogen tail light bulbs are brighter than standard bulbs, but use less energy, which means they burn cooler. 12 volt only.

    This bulb is shorter than a 1157 bulb and measures only 1-3/4" from bottom to end of the tip. From the pin to tip is 1-1/2".



     

  • Tall Model T Cowl-Tail Lights, Black
    Tall Model T Cowl-Tail Lights, Black
    SKU-91117400
    x
                

    Features a 12 volt dual element bulb and can be used as a tail light or a cowl light. 9-1/2" tall with 3" diameter lens. Specify red or amber lens.

    Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

    Cowl Light Installation Instructions (PDF)

  • 1932 Ford Stainless Tail Lights
    From: $29.99
    Product Rating: 4.67 Stars
    1932 Ford Stainless Tail Lights
    SKU-91137005
    x
                

    These are an exact duplicate of the original 1932 Ford glass lens tail lights. Left light has a lens to illuminate license plate. Choose left or right.

    • 12 volt bulb
    • Highly polished stainless steel housing & rim
    • Cloth braided wire loom
    • Stainless steel screws
    • Glass red lens
    • 3-7/8" diameter, 2-3/8" depth
    • 2-11/16" overall depth (includes the wire retainer on the back of the lamp)

     

  • Fuse Block for Glass Fuses
    $9.99
    Product Rating: 5.00 Stars
    Fuse Block for Glass Fuses
    SKU-91064004
    x
                

    Allows easy installation of extra fuses or for use in basic electrical systems. Accepts 7 glass fuses. Also included is two connector strips, one ties three fuses to a common power source and one ties two fuses to a common power source.

  • MSD 8183 2-Pin Deutsch Connector, 16 gauge
    New
    MSD 8183 2-Pin Deutsch Connector, 16 gauge
    SKU-5478183
    x
                There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

    Installation Instructions (PDF)

  • Lokar CC-1600U Carbureted Cruise Control Cable, Black
    Lokar CC-1600U Carbureted Cruise Control Cable, Black
    SKU-491CC1600U
    x
                
    • Lokar cruise control cable is for use with Rostra control kits. Kit includes 4 foot stainless outer housing designed with a specialty extruded liner for extended life of the cable and 5 feet of stainless inner wire, which replaces black plastic cable in Rostra kits. Cables are u-cut-to-fit inside and outside of the firewall. All billet aluminum fittings, stainless hold down clip and mounting bracket. Mount cable to carburetor with Lokar's stainless carburetor bracket and return springs.
    • For Use w/Rostra Control Kits
    • Stainless Housing
    • 5 in. Stainless Inner Wire/4 in. Outer Housing
    • U-Cut-To-Fit Inside And Outside Of Firewall
    • Billet Aluminum Fittings
    • Incl. Hold Down Clip/Mounting Bracket
    • Made In The U.S.A.
    • Lifetime Warranty
  • Speedway 7 Inch Fluted Replacement Headlights w/ Amber Turn Signal
    Speedway 7 Inch Fluted Replacement Headlights w/ Amber Turn Signal
    SKU-9106121
    x
                

    Speedway's 7" replacement Fluted H4 Headlights allow you to have "the look" with out breaking the bank. Features a chrome plated plastic reflector with a glass lens and an "amber" turn signal lens. Includes a H4 Halogen bulb.

    These headlights have a separate 94-style single filament bulb which can be used as a turn signal or a running lamp (not both). 

    • 6-5/8" headlight O.D.
    • Wiring pigtail for turn/running light is included
    • Wiring pigtail for headlight NOT included
    • Uses common 3-prong headlight plug-in

    Headlight Wiring Chart (GIF)

    Installation Instructions (PDF)  

  • MSD 8961 MSD High Current Relay, SPST
    $26.99
    $29.99
    New
    MSD 8961 MSD High Current Relay, SPST
    SKU-5478961
    x
                MSDs High Current Relays are what you need to activate accessories that draw high current. These Relays are very reliable due to the fully automated manufacturing process and sophisticated coil winding procedure. The SPST High Current Relay is rated at 30 amps with an input voltage of 12 volts DC. The relay is ideal for use with the MSD RPM Activated Switch when 12 volts are responsible for activating a high current device such as a nitrous solenoid.The DPST relay is also rated at 30 amps with a 12 volt input voltage. This Relay is the best choice when 12 volts are required to activate multiple high current devices at the same time such as multiple stage nitrous solenoids.

    Installation Instructions (PDF)

  • MSD 8190 10 Male Pins and Seals
    $8.99
    $9.99
    New
    MSD 8190 10 Male Pins and Seals
    SKU-5478190
    x
                Male pins and seals for use with Weathertight Connectors.
            
  • MSD 8187 4-Pin Deutsch Connector, 12-14 gauge
    New
    MSD 8187 4-Pin Deutsch Connector, 12-14 gauge
    SKU-5478187
    x
                There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

    Installation Instructions (PDF)

    • Sealed Connectors
  • MSD 8184 2-Pin Deutsch Connector, 12-14 gauge
    New
    MSD 8184 2-Pin Deutsch Connector, 12-14 gauge
    SKU-5478184
    x
                There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

    Installation Instructions (PDF)

    • Waterproof
    • Quick Connect
  • MSD 8910 Tach Adapter
    $42.99
    $50.99
    New
    MSD 8910 Tach Adapter
    SKU-5478910
    x
                If, after installing an MSD Ignition Control, your ta�chometer, fuel pump relay or electronic fuel injection (in foreign vehicles) doesnt operate correctly, your ap�plication may require a Tach Adapter. This is due to the trigger signal not being strong enough to trigger both the MSD and the factorys components.There are a few Tach Adapters available and for more information see pages 152 and 153. Each Adapter is simple to wire in and will have your MSD and vehicle firing away in no time! If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series Ignition with its white wire or points terminal, you will need the PN 8910 Tach Adapter. The PN 8910 will correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off the tach output terminal of the MSD Ignition Unit.

    Installation Instructions (PDF)

    Installation Instructions (PDF)

    • Lokar SP-1503HT Ford Speedometer Drive Cable Kit, Stainless
      Lokar SP-1503HT Ford Speedometer Drive Cable Kit, Stainless
      SKU-491SP1503HT
      x
                  

      The finishing touch to your mechanical (cable-drive) speedometer installation in your Ford. Kit includes a 7 ft. long braided stainless steel housing and 7' inner cable (you trim to length), billet aluminum fitting ends and instructions.

      Works with all cable-drive aftermarket and original equipment speedometers that have a male 5/8"-18 threaded connection. The transmission end has the standard Ford end with retaining clamp.

    • Lokar SP-1506U Early Ford Speedo Cable Kit w/Ford End, Black Housing
      Lokar SP-1506U Early Ford Speedo Cable Kit w/Ford End, Black Housing
      SKU-491SP1506U
      x
                  Premium housing designed with a specially extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing are "U-Cut-to-Fit". Kit comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included)
      Lokar Speedometer Cables are designed to work with most cable driven aftermarket speedometer gauges (such as Auto Meter, Stewart Warner, VDO, Classic Instruments, etc.) or factory speedometer.
      Lokar Speedometer Cables are designed to fit into the transmission gear adapter (not supplied in Chevy or Chrysler Lokar Kit). Customer must have the trans end adapter and speedometer gear for all Chevy and Chrysler applications. For Ford applications, the gear adapter is supplied in the Lokar Kit. Customer must supply the speedo gear and speedo gear retainer clip.
      • All Lokar Speedometer Cables are seven feet (7') long
      • Designed to be "U-Cut-to-Fit".
      • Additional length cable in black or stainless housing is available upon request for an additional charge.
      • Must have a 3/4 - 20 female thread at the speedometer
    • Lokar XBAG-6109 Midnight Series Oval Billet Aluminum Dimmer Cover
      Lokar XBAG-6109 Midnight Series Oval Billet Aluminum Dimmer Cover
      SKU-491XBAG6109
      x
                  
      • Oval Billet Aluminum Dimmer Cover – Brushed
      • Black Anodized Billet Aluminum 
      • Made In The U.S.A.

       

    • Universal Headlight Mount
      $19.99
      Product Rating: 4.00 Stars
      Universal Headlight Mount
      SKU-91061026
      x
                  
      • 5/16" mounting holes 2" center to center
      • 1/2" ID sleeve for light mounting bolt
      • Great for headlights and taillights
      • Use with mounting cups 91061034
    • 1932 Ford Tail Light LED Conversion Lens
      1932 Ford Tail Light LED Conversion Lens
      SKU-91137026
      x
                  These direct replacement tail light lenses will convert your 1932 Ford Deuce tail lights to powerful and bright LED lights. Choose left or right sides.
      • 17 Super Bright Red LEDs
      • Drivers side (Left side) includes a 4 LED White License Light (primary picture)
      • Epoxy coated, fully sealed electronics
      • Two 1156 plugs
      • Solid state circuit board for 12V systems 
      1932 Ford LED Tail Light Conversion Instructions (pdf)
    • 1937-1938 Chevy Blue Dot Tail Light Lens, Passenger Car
      1937-1938 Chevy Blue Dot Tail Light Lens, Passenger Car
      SKU-91062191
      x
                  

      These red glass tail light lens are replacements for your 1937-1938 Chevy passenger car.  They feature the classic Lynx-Eye blue dot in the center.

      • Original replacements
      • 1937-1938 Chevy passenger car only
      • Classic Lynx-Eye blue dot in center
      • Red glass lens
      • Sold each
    • Safety Kill Switch
      $19.99
      Product Rating: 4.50 Stars
      Safety Kill Switch
      SKU-91364384
      x
                  

      This is the best kill switch we've found! Works with standard ignition only. Water resistant with O-ring shaft seal. Pull on, push off with silver contacts.

      20 amp rating at 12 VDC.

    • MSD 8180 6- Pin Deutsch Connector, 16 gauge
      New
      MSD 8180 6- Pin Deutsch Connector, 16 gauge
      SKU-5478180
      x
                  There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

      Installation Instructions (PDF)

      • Waterproof
      • Heat Shrinkable
      • Battery Quick Disconnects
      • Special Tools
      • Perma-Seal
      • Weather Pack
      • Deutsch
      • Quick Connect
    • MSD 8956 Window RPM Activated Switch
      $87.99
      $112.99
      New
      MSD 8956 Window RPM Activated Switch
      SKU-5478956
      x
                  These RPM-Activated Switches will perform a variety of different functions from turning on a bulb or solenoid to activating an MSD Timing Control at a desired rpm.The RPM-Activated Switch, PN 8950, has two activation wires; one to ground a circuit and the other to open a circuit. Simply plug in an rpm module and wire the Switch to the circuit you want to activate. When the engine rpm reaches that amount, the circuit is activated and will remain on until the rpm falls below that amount.The RPM Window Switch, PN 8956, has two rpm adjustments; one to activate a circuit, while the other deactivates the same circuit. This Switch will supply then remove ground to a circuit. This is a great feature to deactivate nitrous before the engines rev limit is reached. Both Switches can be used with stock inductive ignitions or an MSD Ignition and can handle up to 1.5 amps. No rpm modules are supplied so they must be ordered from the selection of Modules shown here. For use on 4, 6, or 8-cylinder engines.

      Installation Instructions (PDF)

      • 2 RPM Adjustments
      • Activate a circuit
      • Deactivate a circuit
    • Speedway 2005-2006 LS2/4L65E Wiring Harness, Extended
      Speedway 2005-2006 LS2/4L65E Wiring Harness, Extended
      SKU-91050064
      x
                  

      Take the fear out of electronic fuel injection! These engine wiring harnesses are designed to make your engine transplant effortless. Each new harness contains in-depth application-specific instruction sheets, clearly marked factory GM connectors, labeled GXL jacketed wire, GM color coding, and pre-fitted corrugated slit loom for an extra value and professional look. All un-needed emissions wiring is eliminated to make the install as simple and reliable as possible.

      2005-2006 LS2/E40 24X Reluctor and 4L65E Transmission

      • Made from premium grade GXL jacketed automotive wire
      • Most wiring is larger gauge than stock application for durability
      • No splices to reduce points of failure
      • All primary grounding is done at the head or block and grounding points are isolated from each other to reduce electrical interference and minimize ground looping
      • Harness wiring matches GM wiring configuration and jacket colors follow GM color coding for easy identification
      • All electrical connectors are made by Delphi or Packard and are direct fit for GM cars and trucks
      • Can be installed to run engine in 20 minutes, but figure 4-6 hours for a professional installation
      • Diagnostic connector or OBD2 port for connection to scanners and tuning tools
      • Made in the USA.
    • Billet Specialties 32121 Standard Horn Button - No Logo
      Billet Specialties 32121 Standard Horn Button - No Logo
      SKU-91013246
      x
                    
      • Precision machined 6061-T6 billet aluminum
      • Fully polished
      • Stainless internal hardware
    • 1940 Ford Red Glass Tail Light Lens, Passenger Car
      1940 Ford Red Glass Tail Light Lens, Passenger Car
      SKU-91062179
      x
                  

      Replace those old, cracked, or missing tail lights with these reproduction red glass lens.  They are replacement tail light lens for your 1940 Ford passenger car.

      • Original reproduction
      • 1940 Ford passenger car only
      • Red glass lens
      • Sold each

       

       

    • 1938-1939 Ford Blue Dot Tail-Stop Lights
      1938-1939 Ford Blue Dot Tail-Stop Lights
      SKU-91137016
      x
                  

      Polished stainless steel rim taillights for 1938-1939 Ford. These taillights have a blue dot glass lens, single 1157 dual filament bulb, and match the original tail lights closely.

      For 12 volt systems only. Mounting gasket sold separately.

       

    • Tall Model T Cowl-Tail Lights - Chrome
      Tall Model T Cowl-Tail Lights - Chrome
      SKU-91117401
      x
                  

      Fully spun, chrome steel. Model T style cowl light is 9-1/2" tall with 3-1/2" diameter lens. Dual element bulb. Available with amber or red lens. 12 volts.

      Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

       

      Model T Tail Light Assembly Instructions (pdf)


    • Modern Driveline GM Reverse Lock Out Wiring Harness, T-56 Transmission
      Modern Driveline GM Reverse Lock Out Wiring Harness, T-56 Transmission
      SKU-91070003
      x
                  New reverse lockout connector for LS1 and LT1 vehicles equipped with a T56 6 speed manual transmission.    
      • Manufactured from original GM components
      • Terminals crimped with proper GM tooling
      • GM's quality standards
      • Fits GM applications
    • MSD 8920 Tach Adapter, Magnetic Trigger
      $60.99
      $77.99
      New
      MSD 8920 Tach Adapter, Magnetic Trigger
      SKU-5478920
      x
                  If, after installing an MSD Ignition Control, your ta�chometer, fuel pump relay or electronic fuel injection (in foreign vehicles) doesnt operate correctly, your ap�plication may require a Tach Adapter. This is due to the trigger signal not being strong enough to trigger both the MSD and the factorys components.There are a few Tach Adapters available and for more information see pages 152 and 153. Each Adapter is simple to wire in and will have your MSD and vehicle firing away in no time! If you are using the magnetic pick-up input (green and violet wires) to trigger your MSD Ignition, you will need the PN 8920 Tach Adapter. The PN 8920 will correct the operation of most voltage-triggered tachometers that do not work directly off the tach output terminal of the MSD Control. This Adapter should also be used on current-triggered tachs (hooked in series with the ignition switch).

      Installation Instructions (PDF)

      • If you are connecting a tachometer to an MSD Ignition, or your application is equipped with electronic fuel injection then you may need to use this Tach/Fuel Injection Adapter to ensure correct operation. This Adapter will correct the operation of most tachometers and fuel injection pump relays that do not work directly off of the MSD Ignitions 12 volt square wave tach output terminal.
    • Lokar CC-1603HT Tuned-Port Cruise Control Cable, Stainless
      Lokar CC-1603HT Tuned-Port Cruise Control Cable, Stainless
      SKU-491CC1603HT
      x
                  
      • Lokar cruise control cable is for use with Rostra control kits. Kit includes 4 foot stainless outer housing designed with a specialty extruded liner for extended life of the cable and 5 feet of stainless inner wire, which replaces black plastic cable in Rostra kits. Cables are u-cut-to-fit inside and outside of the firewall. All billet aluminum fittings, stainless hold down clip and mounting bracket. Mount cable to carburetor with Lokar's stainless carburetor bracket and return springs.
      • For Use w/Rostra Control Kits
      • Stainless Steel Housing
      • 5 in. Stainless Inner Wire/4 in. Outer Housing
      • U-Cut-To-Fit Inside And Outside Of Firewall
      • Billet Aluminum Fittings
      • Incl. Hold Down Clip/Mounting Bracket
      • Made In The U.S.A.
      • Lifetime Warranty
    • Painless Wiring 70402 Two Wire Weatherpack Connectors
      Painless Wiring 70402 Two Wire Weatherpack Connectors
      SKU-91012212
      x
                  

      A real water-tight connection. Each number consists of one male and one female component. Accepts 14 - 16 gauge wire.

    • Universal Headlight Switch With Hi/Low
      Universal Headlight Switch With Hi/Low
      SKU-91080154
      x
                  

      This headlight switch has four positions. In is off, out one notch is park lights, out another notch is lows beams, and all the way out is high beams. Screw type terminals. 3/8" mounting hole.

      910-80154 Instructions (PDF) 

    • Ford 1933-1936 Car/1945-1952 Pickup Tail Light Lens, Red Glass
      Ford 1933-1936 Car/1945-1952 Pickup Tail Light Lens, Red Glass
      SKU-91062181
      x
                  These reproduction red glass tail light lens are for 1933-1936 Ford cars  and 1945-1952 pickup trucks.  They are for the passenger side and feature specs of the originals. 
      • OEM replacement
      • Red glass lens
      • 1933-1936 Ford cars and 1945-1952 pickups
      • Fit passenger side
      • Sold each
    • MSD 8812 Universal, Push Button, Alt. Action Switch
      New
      MSD 8812 Universal, Push Button, Alt. Action Switch
      SKU-5478812
      x
                  This switch is designed to be used as an auxiliary ignition On/Off but�ton. It can be mounted to the steering wheel within easy reach of the driver and can be used in a Normally Open or Normally Closed position. Assembled and constructed for harsh racing conditions.

      Installation Instructions (PDF)

      • Lokar SP-1505HT Pre-1948 Ford Speedometer Cable Kit, Stainless Housing
        Lokar SP-1505HT Pre-1948 Ford Speedometer Cable Kit, Stainless Housing
        SKU-491SP1505HT
        x
                    Premium housing designed with a specially extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing are "U-Cut-to-Fit". Kit comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included)
        Lokar Speedometer Cables are designed to work with most cable driven aftermarket speedometer gauges (such as Auto Meter, Stewart Warner, VDO, Classic Instruments, etc.) or factory speedometer.
        Lokar Speedometer Cables are designed to fit into the transmission gear adapter (not supplied in Chevy or Chrysler Lokar Kit). Customer must have the trans end adapter and speedometer gear for all Chevy and Chrysler applications. For Ford applications, the gear adapter is supplied in the Lokar Kit. Customer must supply the speedo gear and speedo gear retainer clip.
        • All Lokar Speedometer Cables are seven feet (7') long
        • Designed to be "U-Cut-to-Fit".
        • Additional length cable in black or stainless housing is available upon request for an additional charge.
        • Must have a 3/4 - 20 female thread at the speedometer
      • Universal Stainless Steel Headlight Mounting Cup
        Universal Stainless Steel Headlight Mounting Cup
        SKU-91061035
        x
                    Use these stainless steel cone mounting cups to add style to your headlight/taillight application while supporting the light shell at the base.  Available in a plain finish as well. (91061034)
        • Great for headlights and taillights
        • Designed for use with universal mounting bracket (91061026)
      • 1950 Pontiac Red Tail Light Assembly
        1950 Pontiac Red Tail Light Assembly
        SKU-91137050
        x
                    

        The 1950 Pontiac clean round shape and domed lens of the tail light have been a staple on hot rods for more than five decades. This beautiful taillight assembly is a faithful reproduction of that classic design and features a glass lens just like the original. This taillight makes a perfect finishing touch on a wide variety of street rods and customs – or you could even use it on a '50 Pontiac!

        • Classic shape and design
        • Easily adaptable to a variety of vehicles
        • Red glass lens
        • Chrome bezel
        • Rubber mount gasket included
        • Single 1157 dual-filament bulb
      • Painless Wiring 60218 1999-2005 GM Vortec Engine Harness, Extended
        Painless Wiring 60218 1999-2005 GM Vortec Engine Harness, Extended
        SKU-91060218
        x
                    Please view the product's page for more information
                
      • Tribute T Headlight Bracket Mount Kit
        Tribute T Headlight Bracket Mount Kit
        SKU-7151813
        x
                    These headlight mount kits are designed for use with our Tribute T kit cars but will also work as a universal kit for a variety of other applications.  They accept Dietz style headlights.
        • 5/16" mounting holes 2" center to center
        • 1/2" ID sleeve for light mounting bolt
        • Great for headlights and taillights
        • Accepts Dietz style headlights
        • Kit includes:
          • (2) mounting cups
          • (2) rubber mount pads
          • (4) mounting bolts
      • Universal Dash Harness for Mechanical Speedometer
        Universal Dash Harness for Mechanical Speedometer
        SKU-91064025
        x
                    

        If you want to keep your under-dash area organized or you think that you will need to remove gauges from time to time, then you need to install this universal gauge harness. It will connect to all major brand gauges including Auto Meter and VDO and works with most dash layouts and sizes.

        Includes all connections for volt meter, oil pressure, temperature, tachometer, speedometer and fuel gauges, plus high beams and turn signals. For cable drive speedometer only.

        Universal Dash Mechanical Speedometer Wiring Instructions (PDF) 

      Goto Previous PagePrevious Page
      1 2 3 4 5 ... 12