Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop T-Bucket Electrical Wiring & Lights At Speedway Motors

Speedway Motors is your one stop shop for T-Bucket wiring and lighting. Make wiring your roadster simple with easy-to-use wiring harnesses and step by step instructions. Finally, finish off your T-Bucket project with specialty headlights, LED tail lights and vintage cowl lights. Let Speedway Motors eliminate any and all of your roadster electrical system problems!

Featured Products
Heavy Duty Turn Signal Switch
Heavy Duty Turn Signal Switch
x
            

For early autos not equipped with right and left turn signals. Chrome plated finish. Switch works with 6 or 12 volt systems. Includes wiring diagram. Clamps to any steering column with included stainless hose clamp. Switch has four-way flashers and does not self cancel.

You will need to purchase a three-prong flasher to use with this switch (part number 910-64046). For LED light applications, you will also need a LED dummy load resistor (part number 910-03030).

910-62860 Instructions (PDF)

Black Dietz Type Headlights, Standard Bulb
Black Dietz Type Headlights, Standard Bulb
x
            

Our universal fit Deitz-type 7" headlights feature black painted housings with chrome rings. Has a 12 volt sealed beam bulb with both high & low beams. "Drilled" mounting stud measures 1/2"-13. The pre-wired plug has 3 wires with 6" leads.

1928-1931 Ford Model A Stainless Tail Lights
1928-1931 Ford Model A Stainless Tail Lights
x
            

Polished stainless steel housing with glass lenses. An excellent replacement or addition to your Model 'A' Ford. Left tail light has lenses on the bottom to illuminate a license plate. Choose left or right. 12 volt operation.

  • 3.851" diameter
  • 3" depth
  • 3.851" height
  • 1-3/4" mount 

Wire colors:

  • Housing - Ground
  • Tail - Black
  • Stop - Green

These tail lights have two bulbs in them that are of a single filament style. 

Universal Headlight Switch With Hi/Low
Universal Headlight Switch With Hi/Low
x
            

This headlight switch has four positions. In is off, out one notch is park lights, out another notch is lows beams, and all the way out is high beams. Screw type terminals. 3/8" mounting hole.

910-80154 Instructions (PDF) 

"T-Bucket, Electrical, Lighting and Body" Page 1 of 11

  • Modern Driveline Reverse Switch Harness for GM T5 and T56 Transmissions
    Modern Driveline Reverse Switch Harness for GM T5 and T56 Transmissions
    x
                

    These harnesses for transmission neutral safety switch/reverse light switches are designed for use with GM T5 and T56 transmissions.

    • Factory style
    • For GM T5 and T56 transmissions

     

  • Tall Model T Cowl-Tail Lights, Black
    Tall Model T Cowl-Tail Lights, Black
    x
                

    Features a 12 volt dual element bulb and can be used as a tail light or a cowl light. 9-1/2" tall with 3" diameter lens. Specify red or amber lens.

    Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

    Cowl Light Installation Instructions (PDF)

  • Universal Headlight Mount
    $19.99
    Product Rating: 4.75 Stars
    Universal Headlight Mount
    x
                
    • 5/16" mounting holes 2" center to center
    • 1/2" ID sleeve for light mounting bolt
    • Great for headlights and taillights
    • Use with mounting cups 91061034
  • Safety Kill Switch
    $19.99
    Product Rating: 5.00 Stars
    Safety Kill Switch
    x
                

    This is the best kill switch we've found! Works with standard ignition only. Water resistant with O-ring shaft seal. Pull on, push off with silver contacts.

    20 amp rating at 12 VDC.

  • Painless Wiring 70402 Two Wire Weatherpack Connectors
    Painless Wiring 70402 Two Wire Weatherpack Connectors
    x
                

    A real water-tight connection. Each number consists of one male and one female component. Accepts 14 - 16 gauge wire.

  • Stainless License Plate Light
    Stainless License Plate Light
    x
                
    • Fully polished stainless steel housing
    • 12 volt operation
    • Mounting hardware included
    • Uses common replaceable wedge-type dashlight bulb
  • Universal Specialty Light, Double Filament Bulb, Amber Lens
    Universal Specialty Light, Double Filament Bulb, Amber Lens
    x
                

    Double filament bulbs work great for custom taillights, brake or turn signals. Chrome housing measures 2-1/2" long and 1-3/4" wide. Wires feed through a 3/8” bolt that threads into the main housing. The chrome washer and rubber washer are 7/8” O.D.

    This accessory light uses double filament replacement bulb 316-2012.

  • 1926-27 T Headlamp Plug
    $21.99
    1926-27 T Headlamp Plug
    x
                

    This plug fits into the headlamp socket. The round part covers the wire ends. Double contact. Will fit most 1915-1927 headlamps but is intended for use with our '26-'27 lamps 911-12012.

  • 1938-1939 Ford Tail Light Frenching Bucket
    1938-1939 Ford Tail Light Frenching Bucket
    x
                

    These all steel buckets allow you to "French" your 1938-1939 Ford tail lights into the body. Welding & bodywork required.

    1938-1939 Ford Tail Light Installation Instructions (PDF)

  • Mechanical Speedometer Universal Dash Gauge Harness
    Mechanical Speedometer Universal Dash Gauge Harness
    x
                

    If you want to keep your under-dash area organized or you think that you will need to remove gauges from time to time, then you need to install this universal gauge harness. It will connect to all major brand gauges including Auto Meter and VDO and works with most dash layouts and sizes.

    Includes all connections for volt meter, oil pressure, temperature, tachometer, and fuel gauges, plus high beams and turn signals. Plus, the purpose of each wire is printed directly on it for a fool-proof installation.

    • Fits all dash layouts
    • Omega style harness
    • Color coded and labeled for intended circuit
    • Note: excludes Speedo sender wiring

    One harness has 9 wires that are 18-1/4" long and the other harness has 26 wires with the longest wire 30-3/4" long .

  • Universal Windshield Wiper Switch for Single Motor
    Universal Windshield Wiper Switch for Single Motor
    x
                

    These easy-to-use universal windshield wiper switches feature OFF/PARK, LOW and HIGH and are for use with single motor wiper set-ups.

    • 3-position switch 
    • Requires a 7/16" mounting hole
    • (4) blade style terminals

    910-64056 Instructions (PDF)

  • Model T Cowl or Tail Light Brackets for 9-1/2 Inch Lamp
    Model T Cowl or Tail Light Brackets for 9-1/2 Inch Lamp
    x
                

    Mounts to side of 9-1/2" tall lamps and any flat surface. Conceals wiring. Available in brass or chrome.

    Note: This is the bracket only (hardware NOT included).

  • Headlight Cone Mounting Cups
    Headlight Cone Mounting Cups
    x
                Headlight cone mounting cups for universal headlight mount 91061026.
            
  • LED 1157 Tail Light Bulb, 1 Inch, Red
    LED 1157 Tail Light Bulb, 1 Inch, Red
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The bulbs appear to be clear, but are red when illuminated.

    LED taillight bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LEDs will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.)

     

  • 1928-1931 Ford Model A Stainless Tail Lights
    1928-1931 Ford Model A Stainless Tail Lights
    x
                

    Polished stainless steel housing with glass lenses. An excellent replacement or addition to your Model 'A' Ford. Left tail light has lenses on the bottom to illuminate a license plate. Choose left or right. 12 volt operation.

    • 3.851" diameter
    • 3" depth
    • 3.851" height
    • 1-3/4" mount 

    Wire colors:

    • Housing - Ground
    • Tail - Black
    • Stop - Green

    These tail lights have two bulbs in them that are of a single filament style. 

  • Painless Wiring 40008 Four Wire Quick Connect Terminal
    Painless Wiring 40008 Four Wire Quick Connect Terminal
    x
                

    Make your own locking quick connect plugs easily and quickly. Each kit contains one male and one female component. Accept 10 - 20 gauge wire.

  • Painless Wiring 30001 Universal 12 Circuit Fuse Block
    Painless Wiring 30001 Universal 12 Circuit Fuse Block
    x
                

    Use this Painless 12 Circuit OEM style pre-wired fuse block to replace your existing fuse block or as a starting point for custom wiring. All you have to do is terminate your circuit wire and attach it to the fuse block. Pre-wired and labeled for the following circuits: A/C-Heat, gauges/dash instruments, brake lights, headlights, coil, horn, dome lights, radio, electric fan, turn signals, hazards, wipers and alternator.

    Has accessory outlets, offers a compact size and includes easy-to-follow instructions makes any job painless. Kit includes mounting bracket, fuses, flashers, horn relay, terminals and full instructions.

    12 Circuit ATO Fuse Block Installation Instructions (PDF)

     

  • Lokar EHB-7001 Emergency Brake Warning Light Switch
    Lokar EHB-7001 Emergency Brake Warning Light Switch
    x
                

    This emergency brake warning switch kit triggers your dash light or buzzer to alert you when your emergency brake is engaged.

    Kit includes a switch, stainless trigger, 2 electrical terminals, e-clip and pin and 2 mounting bolts.

    Works with floormount hand brake levers only (491-7000 & 491-07000).

  • Tridon Replacement Turn Signal Flasher Unit, 3-Prong
    Tridon Replacement Turn Signal Flasher Unit, 3-Prong
    x
                

    These state-of-the-art electronic flashers work with standard bulbs. 12 volt operation (will not work on 6 volt systems). Made in the U.S.A.

    • Replacement for turn signal
    • Works with standard bulbs
    • 12 volt operation only
    • 3-Prong
    • Made in the U.S.A.

    Flasher function:

    • The X terminal is the + 12v input
    • The P terminal output drives the flasher indicator
    • The L terminal drives the load (bulbs)

    Note: We recommend the use of our grounded LED flashers for use with LED's (910-64112 3-prong).

  • Lokar SP-1500U GM Speedometer Drive Cable Kit, Black
    Lokar SP-1500U GM Speedometer Drive Cable Kit, Black
    x
                

    The finishing touch to your mechanical (cable-drive) speedometer installation in your GM or Mopar. Includes a 7 ft. long glossy black vinyl housing and inner cable (you trim to length) with billet aluminum ends, and instructions.

    Works with all cable-drive aftermarket and original equipment speedometers that have a male 5/8"-18 thread connection. Has a 7/8"-18 end for the transmission.

  • MSD 8985 Timing Tapes
    $5.99
    Product Rating: 4.50 Stars
    MSD 8985 Timing Tapes
    x
                

    MSD's timing tape set comes with eight different tapes to fit balancers from 5-1/4" to 8" diameters.

    MSD Rebate (Link)

  • Universal Mechanical Brake Light Switch
    Universal Mechanical Brake Light Switch
    x
                

    Our mechanical brake light switch is "closed" in the at rest position. It breaks the circuit when pushed. Mounts near your brake pedal and the arm can be bent as needed. 42 amp max rating.

    Use for your street rod, truck, or muscle car!

  • Moroso 26100 Distributor Timing Indicator
    Moroso 26100 Distributor Timing Indicator
    x
                

    Fast and accurate method of adjusting ignition timing without use of a timing light. Change timing quickly between heats. Fits all Chevy V8 and 90° V6 distributors. May require minor modification to some manifolds.

    545-26100 Instructions (PDF)

  • DPDT Momentary Toggle Switch
    $14.99
    DPDT Momentary Toggle Switch
    x
                

    Universal heavy duty 3-position momentary toggle switch. Features a nickel-plated brass switch, phenolic housing, and plated steel cap. Rated at 25A at 12V, 15A at 24V, and 10A at 36V DC.

    • Mounting Stem:  15/32" -32 thread, 15/32" long, and fits panels up to 9/32"
    • Six Screw Terminals:  6-32 screws
    • Electrical Rating:  25A at 12V, 15A at 24V, and 10A at 36V DC

    Works great as a linear actuator switch!

    Note: Up=Momentary On, Center=Off, Down=Momentary On.

  • Painless Wiring 60101 GM Throttle Body Injection Engine Harness
    Painless Wiring 60101 GM Throttle Body Injection Engine Harness
    x
                The GM Throttle Body Injection system this Painless Performance harness operates is a perfect upgrade for those fed up with their carburetor fueled engine. Complete stand alone harness allows you to install late model GM fuel injected engine and correct computer into almost any chassis. Harness includes all connections for fuel injection operation: ECM, MAP, O2, TPS, ESC, IAC, IAT, CTS, Knock, Injectors, OBD1 w/SES light, VSS and TCC solenoid. 

    This standard length harness allows four feet from the back of the intake manifold to where the fuseblock and ECM mount. Perfect for those that plan to mount these components under the dash or in the glove box.

    Besides the obvious economy and driveability benefits, check out these other great features that make it easy and painless to install:
    • Foolproof factory connections
    • ALDL (diagnostic) plug
    • Computer controlled fuel pump provision
    • GM color code
    • Closed loop design

    GM Throttle Body Injection Wiring Instructions (PDF)

  • Universal Specialty Light, Single Filament Bulb, Amber Lens
    Universal Specialty Light, Single Filament Bulb, Amber Lens
    x
                

    Light features a 12 volt single filament bulb with a chrome 1-3/4" long x 1-1/4" wide housing. Mounting stud diameter is 3/8".

    This accessory light uses single filament replacement bulb 316-2089.

  • Painless Wiring 30201 Hot Shot Relay
    Painless Wiring 30201 Hot Shot Relay
    x
                

    This relay kit allows you to turn over the engine from the engine compartment for adjusting valves. It also overcomes starting problems due to an overheated starter or worn out electrical system by boosting amperage to the starter solenoid every time the vehicle is started.

    This kit includes:

    • Bump start switch with mounting bracket
    • 30 Amp heavy duty relay
    • Relay base with wire harness
    • 30 Amp circuit breaker
    • Crimp-on terminals
    • Mounting hardware

    Hot Shot Relay Kit Installation Instructions (PDF)

  • Interior-License Plate Light
    Interior-License Plate Light
    x
                Chrome plated. 12 volt. Measures 1-1/4" diameter. 
            
  • Replacement Lens for Tri-Bar Headlights 91101004
    Replacement Lens for Tri-Bar Headlights 91101004
    x
                

    These replacement tri-bar headlight lens feature a 7" diameter. Curved lens is fluted for superior driving vision. They are replacement for our tri-bar headlight assemblies (91101004).

    • 7" diameter
    • Curved lens is fluted for superior driving vision
    • Replacement for tri-bar headlight (91101004)
  • Double Throw Toggle Switch with Boot
    Double Throw Toggle Switch with Boot
    x
                

    Single pole, double throw. On-On configuration. Plastic housing with steel plate. Rubber boot protects switch from dirt and moisture. This toggle switch requires a 1/2" hole to mount it.

    • Three terminals
    • Two toggle positions
    • Rated for 25 amps at 12 volts DC

     

  • Painless Wiring 40024 Jamb Tac Door Jamb Connector, 4 Wire
    Painless Wiring 40024 Jamb Tac Door Jamb Connector, 4 Wire
    x
                No more ugly wires! Don't wire it... Jamb Tac it! These spring loaded electrical contacts eliminate those ugly wires running into your doors. One pair contains enough parts for one door. One piece installs in the door and one piece installs in the door jam.

    The contact buttons on these jamb tac kits are adjustable in length or depth from 0" to 3/8".
  • 1938-39 Ford Red LED Tail-Stop Lights
    1938-39 Ford Red LED Tail-Stop Lights
    x
                

    Each of these complete 1938-39 Ford LED taillights are optimized for visibility and proper fit on the car. Taillights include a pressure cast polished stainless bezel, glass lens, and stainless steel hardware.

    • 28 super-bright LEDs
    • Glass lens
    • Epoxy coated, fully-sealed electronics
    • Stainless steel rim and black housing 

    911-37014 Instructions (PDF)

  • Speedway GM Engine Wiring Harness, 1999-02 LS1
    Speedway GM Engine Wiring Harness, 1999-02 LS1
    x
                

    Take the fear out of electronic fuel injection! These engine wiring harnesses are designed to make your engine transplant effortless. Each new harness contains in-depth application-specific instruction sheets, clearly marked factory GM connectors, labeled GXL jacketed wire, GM color coding, and pre-fitted corrugated slit loom for an extra value and professional look. All un-needed emissions wiring is eliminated to make the install as simple and reliable as possible. Standard length harnesses are 54" from the back of the engine to the PCM connectors.

    1999-2002 LS1

    • Made from premium grade GXL jacketed automotive wire
    • Most wiring is larger gauge than stock application for durability
    • No splices to reduce points of failure
    • All primary grounding is done at the head or block and grounding points are isolated from each other to reduce electrical interference and minimize ground looping
    • Harness wiring matches GM wiring configuration and jacket colors follow GM color coding for easy identification
    • All electrical connectors are made by Delphi or Packard and are direct fit for GM cars and trucks
    • Can be installed to run engine in 20 minutes, but figure 4-6 hours for a professional installation
    • Diagnostic connector or OBD2 port for connection to scanners and tuning tools
    • Made in the USA.
  • Electrical 4 Terminal Block Strip
    $4.99
    $5.99
    Electrical 4 Terminal Block Strip
    x
                

    Connect all the wires in your panel or enclosure in one convenient place. Also known as barrier terminal strips, these blocks have screw terminals—just loosen a screw and wrap a stripped wire end around it (or use a spade terminal) and tighten the screw. All have four mounting holes. Color is black. UL recognized and CSA certified.

    • Phenolic block 
    • Tin-plated brass terminals
    • Ni-plated steel screws
    • Amps Per Circuit: 20A
    • For Wire Size, AWG: 22-12
    • Screw Terminal Size: #6-32
    • Center-to-Center:  0.38"
    • Mount Hole Diameter:  0.17"

    Note: These are terminal strips and are NOT intended for use as ground strips. To be used as a ground strip, all terminals on one side would need to be pigtailed together.

  • Lokar HL-1900 Anchor-Tight Stainless Steel Headlight Braid
    Lokar HL-1900 Anchor-Tight Stainless Steel Headlight Braid
    x
                

    No, this is not just another headlight conduit! This is Lokar's design technology for "U-Cut-to-Fit", non-kinking stainless steel headlight braid. Designed with threaded steel studs to insure that you won't experience any of the typical separation between braid and fitting that shows unsightly wires out in the open. Pull, tug or bump your headlight braid and it will stay in place, leaving you with protected wires and a clean set up. Kit comes complete with two 14" flexible braided stainless steel Teflon-lined housings, threaded STEEL studs, billet aluminum fittings, aluminum grill shell washers and four 26" headlight wires.

    • Non-kinking stainless steel
    • Threaded steel studs to insure no separation between braid and fitting
    • Comes complete with:
      • (2)Two 14" flexible braided stainless steel Teflon-lined housings
      • Threaded STEEL studs
      • Billet aluminum fittings
      • Aluminum grill shell washers
      • (4)Four 26" headlight wires
  • Black Deitz Type 7 Inch Headlight Bucket
    Black Deitz Type 7 Inch Headlight Bucket
    x
                
    • Universal application headlight bucket
    • Accepts 7" diameter headlights
    • Black painted steel
  • Eyelid Headlight Trim
    $8.99
    Product Rating: 5.00 Stars
    Eyelid Headlight Trim
    x
                This eyelid trim fits 7" diameter, sealed beam head lamps (6 or 12 volt) as used by most 2- headlamp systems, 1940 and newer.  Each is constructed of chrome plated steel and fits under the edge of the headlamps' retaining ring. Installs in minutes with simple hand tools. 

    Great for cars, truck, motorcycles, anything with 7" round, sealed beam headlamps!

    Cat Eyes and Eyelids, while not recommended for highway use, only slightly affect actual light output.

  • Windshield Stop Light Prism
    $9.99
    Product Rating: 3.61 Stars
    Windshield Stop Light Prism
    x
                Whether you're running a chopped coupe or just looking for that nostalgic look......you gotta get one of these stop light prisms!  Just mount it on your windshield and you can see the traffic light without breaking your neck. Traffic light viewer attaches to your windshield with the suction cup base.
            
  • Universal Headlight Switch
    $11.99
    Product Rating: 4.77 Stars
    Universal Headlight Switch
    x
                

    This universal 3-position headlight switch features Off, Park, and Headlight/tailight. Screw type terminals. 7/16" mounting hole.

    Has a 15 amp per circuit rating at 12 volts.

    Universal Headlight Switch Instructions (PDF)

  • Universal Ignition Switch
    $14.99
    Product Rating: 4.86 Stars
    Universal Ignition Switch
    x
                

    This universal, 4 position ignition switch features ACC, OFF, IGN/ACC, and IGN/START. Screw type terminals. 3/4" mounting hole and 2 keys included.

    • Requires 2-3/8" of space behind dash for clearance
    • Fits 3/4" to 7/8" hole
    • Terminals: 4 screw
    • Actuators: coded tumbler lock, 2 keys
    • Sealed terminal insulator: no
    • O-ring seal in stem: no
    • Ground terminal: no
    • Mounting stem: 3/4"-20
    • Case material: diecast zinc
    • Mounting panel thickness: 3/8"
    • Amperage ratings (current ratings at 12V DC)
      •  Accessory: 10A
      • Ign/Run: 10A
      • Start: 5A
Goto Previous PagePrevious Page
1 2 3 4 5 ... 11