Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop T-Bucket Electrical Wiring & Lights At Speedway Motors

Speedway Motors is your one stop shop for T-Bucket wiring and lighting. Make wiring your roadster simple with easy-to-use wiring harnesses and step by step instructions. Finally, finish off your T-Bucket project with specialty headlights, LED tail lights and vintage cowl lights. Let Speedway Motors eliminate any and all of your roadster electrical system problems!

Featured Products
Heavy Duty Turn Signal Switch
Heavy Duty Turn Signal Switch
x
            

For early autos not equipped with right and left turn signals. Chrome plated finish. Switch works with 6 or 12 volt systems. Includes wiring diagram. Clamps to any steering column with included stainless hose clamp. Switch has four-way flashers and does not self cancel.

You will need to purchase a three-prong flasher to use with this switch (part number 910-64046). For LED light applications, you will also need a LED dummy load resistor (part number 910-03030).

910-62860 Instructions (PDF)

Black Dietz Type Headlights, Standard Bulb
Black Dietz Type Headlights, Standard Bulb
x
            

Our universal fit Deitz-type 7" headlights feature black painted housings with chrome rings. Has a 12 volt sealed beam bulb with both high & low beams. "Drilled" mounting stud measures 1/2"-13. The pre-wired plug has 3 wires with 6" leads.

1928-1931 Ford Model A Stainless Tail Lights
1928-1931 Ford Model A Stainless Tail Lights
x
            

Polished stainless steel housing with glass lenses. An excellent replacement or addition to your Model 'A' Ford. Left tail light has lenses on the bottom to illuminate a license plate. Choose left or right. 12 volt operation.

  • 3.851" diameter
  • 3" depth
  • 3.851" height
  • 1-3/4" mount 

Wire colors:

  • Housing - Ground
  • Tail - Black
  • Stop - Green

These tail lights have two bulbs in them that are of a single filament style. 

Universal Headlight Switch With Hi/Low
Universal Headlight Switch With Hi/Low
x
            

This headlight switch has four positions. In is off, out one notch is park lights, out another notch is lows beams, and all the way out is high beams. Screw type terminals. 3/8" mounting hole.

910-80154 Instructions (PDF) 

"T-Bucket, Electrical, Lighting and Body" Page 1 of 11

  • Modern Driveline Reverse Switch Harness for GM T5 and T56 Transmissions
    Modern Driveline Reverse Switch Harness for GM T5 and T56 Transmissions
    x
                

    These harnesses for transmission neutral safety switch/reverse light switches are designed for use with GM T5 and T56 transmissions.

    • Factory style
    • For GM T5 and T56 transmissions

     

  • Halogen Tail Light Bulbs, 1157 Offset Mounting Pins
    Halogen Tail Light Bulbs, 1157 Offset Mounting Pins
    x
                

    Those other super bright, super high powered tail light bulbs may be easy to see, but they also generate enough heat to discolor your lens and burn the paint.

    Halogen tail light bulbs are brighter than standard bulbs, but use less energy, which means they burn cooler. 12 volt only.

    This bulb is shorter than a 1157 bulb and measures only 1-3/4" from bottom to end of the tip. From the pin to tip is 1-1/2".



     

  • Tall Model T Cowl-Tail Lights, Black
    Tall Model T Cowl-Tail Lights, Black
    x
                

    Features a 12 volt dual element bulb and can be used as a tail light or a cowl light. 9-1/2" tall with 3" diameter lens. Specify red or amber lens.

    Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

    Cowl Light Installation Instructions (PDF)

  • 1932 Ford Stainless Tail Lights
    From: $29.99
    Product Rating: 4.67 Stars
    1932 Ford Stainless Tail Lights
    x
                

    These are an exact duplicate of the original 1932 Ford glass lens tail lights. Left light has a lens to illuminate license plate. Choose left or right.

    • 12 volt bulb
    • Highly polished stainless steel housing & rim
    • Cloth braided wire loom
    • Stainless steel screws
    • Glass red lens
    • 3-7/8" diameter, 2-3/8" depth
    • 2-11/16" overall depth (includes the wire retainer on the back of the lamp)

     

  • Fuse Block for Glass Fuses
    $9.99
    Product Rating: 5.00 Stars
    Fuse Block for Glass Fuses
    x
                

    Allows easy installation of extra fuses or for use in basic electrical systems. Accepts 7 glass fuses. Also included is two connector strips, one ties three fuses to a common power source and one ties two fuses to a common power source.

  • Lokar CC-1600U Carbureted Cruise Control Cable, Black
    Lokar CC-1600U Carbureted Cruise Control Cable, Black
    x
                
    • Lokar cruise control cable is for use with Rostra control kits. Kit includes 4 foot stainless outer housing designed with a specialty extruded liner for extended life of the cable and 5 feet of stainless inner wire, which replaces black plastic cable in Rostra kits. Cables are u-cut-to-fit inside and outside of the firewall. All billet aluminum fittings, stainless hold down clip and mounting bracket. Mount cable to carburetor with Lokar's stainless carburetor bracket and return springs.
    • For Use w/Rostra Control Kits
    • Stainless Housing
    • 5 in. Stainless Inner Wire/4 in. Outer Housing
    • U-Cut-To-Fit Inside And Outside Of Firewall
    • Billet Aluminum Fittings
    • Incl. Hold Down Clip/Mounting Bracket
    • Made In The U.S.A.
    • Lifetime Warranty
  • Speedway 7 Inch Fluted Replacement Headlights w/ Amber Turn Signal
    Speedway 7 Inch Fluted Replacement Headlights w/ Amber Turn Signal
    x
                

    Speedway's 7" replacement Fluted H4 Headlights allow you to have "the look" with out breaking the bank. Features a chrome plated plastic reflector with a glass lens and an "amber" turn signal lens. Includes a H4 Halogen bulb.

    These headlights have a separate 94-style single filament bulb which can be used as a turn signal or a running lamp (not both). 

    • 6-5/8" headlight O.D.
    • Wiring pigtail for turn/running light is included
    • Wiring pigtail for headlight NOT included
    • Uses common 3-prong headlight plug-in

    Headlight Wiring Chart (GIF)

    Installation Instructions (PDF)  

  • Lokar SP-1503HT Ford Speedometer Drive Cable Kit, Stainless
    Lokar SP-1503HT Ford Speedometer Drive Cable Kit, Stainless
    x
                

    The finishing touch to your mechanical (cable-drive) speedometer installation in your Ford. Kit includes a 7 ft. long braided stainless steel housing and 7' inner cable (you trim to length), billet aluminum fitting ends and instructions.

    Works with all cable-drive aftermarket and original equipment speedometers that have a male 5/8"-18 threaded connection. The transmission end has the standard Ford end with retaining clamp.

  • Lokar SP-1506U Early Ford Speedo Cable Kit w/Ford End, Black Housing
    Lokar SP-1506U Early Ford Speedo Cable Kit w/Ford End, Black Housing
    x
                Premium housing designed with a specially extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing are "U-Cut-to-Fit". Kit comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included)
    Lokar Speedometer Cables are designed to work with most cable driven aftermarket speedometer gauges (such as Auto Meter, Stewart Warner, VDO, Classic Instruments, etc.) or factory speedometer with a 5/8-18 male thread at the speedo.
    Lokar Speedometer Cables are designed to fit into the transmission gear adapter (not supplied in Chevy or Chrysler Lokar Kit). Customer must have the trans end adapter and speedometer gear for all Chevy and Chrysler applications. For Ford applications, the gear adapter is supplied in the Lokar Kit. Customer must supply the speedo gear and speedo gear retainer clip.
    • All Lokar Speedometer Cables are seven feet (7') long
    • Designed to be "U-Cut-to-Fit".
    • Additional length cable in black or stainless housing is available upon request for an additional charge.
    • Must have a 3/4 - 20 female thread at the speedometer
  • Lokar XBAG-6109 Midnight Series Oval Billet Aluminum Dimmer Cover
    Lokar XBAG-6109 Midnight Series Oval Billet Aluminum Dimmer Cover
    x
                
    • Oval Billet Aluminum Dimmer Cover – Brushed
    • Black Anodized Billet Aluminum 
    • Made In The U.S.A.

     

  • Universal Headlight Mount
    $19.99
    Product Rating: 4.00 Stars
    Universal Headlight Mount
    x
                
    • 5/16" mounting holes 2" center to center
    • 1/2" ID sleeve for light mounting bolt
    • Great for headlights and taillights
    • Use with mounting cups 91061034
  • 1932 Ford Tail Light LED Conversion Lens
    1932 Ford Tail Light LED Conversion Lens
    x
                These direct replacement tail light lenses will convert your 1932 Ford Deuce tail lights to powerful and bright LED lights. Choose left or right sides.
    • 17 Super Bright Red LEDs
    • Drivers side (Left side) includes a 4 LED White License Light (primary picture)
    • Epoxy coated, fully sealed electronics
    • Two 1156 plugs
    • Solid state circuit board for 12V systems 
    1932 Ford LED Tail Light Conversion Instructions (pdf)
  • 1937-1938 Chevy Blue Dot Tail Light Lens, Passenger Car
    1937-1938 Chevy Blue Dot Tail Light Lens, Passenger Car
    x
                

    These red glass tail light lens are replacements for your 1937-1938 Chevy passenger car.  They feature the classic Lynx-Eye blue dot in the center.

    • Original replacements
    • 1937-1938 Chevy passenger car only
    • Classic Lynx-Eye blue dot in center
    • Red glass lens
    • Sold each
  • Safety Kill Switch
    $19.99
    Product Rating: 5.00 Stars
    Safety Kill Switch
    x
                

    This is the best kill switch we've found! Works with standard ignition only. Water resistant with O-ring shaft seal. Pull on, push off with silver contacts.

    20 amp rating at 12 VDC.

  • Speedway 2005-2006 LS2/4L65E Wiring Harness, Extended
    Speedway 2005-2006 LS2/4L65E Wiring Harness, Extended
    x
                

    Take the fear out of electronic fuel injection! These engine wiring harnesses are designed to make your engine transplant effortless. Each new harness contains in-depth application-specific instruction sheets, clearly marked factory GM connectors, labeled GXL jacketed wire, GM color coding, and pre-fitted corrugated slit loom for an extra value and professional look. All un-needed emissions wiring is eliminated to make the install as simple and reliable as possible.

    2005-2006 LS2/E40 24X Reluctor and 4L65E Transmission

    • Made from premium grade GXL jacketed automotive wire
    • Most wiring is larger gauge than stock application for durability
    • No splices to reduce points of failure
    • All primary grounding is done at the head or block and grounding points are isolated from each other to reduce electrical interference and minimize ground looping
    • Harness wiring matches GM wiring configuration and jacket colors follow GM color coding for easy identification
    • All electrical connectors are made by Delphi or Packard and are direct fit for GM cars and trucks
    • Can be installed to run engine in 20 minutes, but figure 4-6 hours for a professional installation
    • Diagnostic connector or OBD2 port for connection to scanners and tuning tools
    • Made in the USA.
  • Billet Specialties 32121 Standard Horn Button - No Logo
    Billet Specialties 32121 Standard Horn Button - No Logo
    x
                  
    • Precision machined 6061-T6 billet aluminum
    • Fully polished
    • Stainless internal hardware
  • 1940 Ford Red Glass Tail Light Lens, Passenger Car
    1940 Ford Red Glass Tail Light Lens, Passenger Car
    x
                

    Replace those old, cracked, or missing tail lights with these reproduction red glass lens.  They are replacement tail light lens for your 1940 Ford passenger car.

    • Original reproduction
    • 1940 Ford passenger car only
    • Red glass lens
    • Sold each

     

     

  • 1938-1939 Ford Blue Dot Tail-Stop Lights
    1938-1939 Ford Blue Dot Tail-Stop Lights
    x
                

    Polished stainless steel rim taillights for 1938-1939 Ford. These taillights have a blue dot glass lens, single 1157 dual filament bulb, and match the original tail lights closely.

    For 12 volt systems only. Mounting gasket sold separately.

     

  • Tall Model T Cowl-Tail Lights - Chrome
    Tall Model T Cowl-Tail Lights - Chrome
    x
                

    Fully spun, chrome steel. Model T style cowl light is 9-1/2" tall with 3-1/2" diameter lens. Dual element bulb. Available with amber or red lens. 12 volts.

    Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

     

    Model T Tail Light Assembly Instructions (pdf)


  • Modern Driveline GM Reverse Lock Out Wiring Harness, T-56 Transmission
    Modern Driveline GM Reverse Lock Out Wiring Harness, T-56 Transmission
    x
                New reverse lockout connector for LS1 and LT1 vehicles equipped with a T56 6 speed manual transmission.    
    • Manufactured from original GM components
    • Terminals crimped with proper GM tooling
    • GM's quality standards
    • Fits GM applications
  • Lokar CC-1603HT Tuned-Port Cruise Control Cable, Stainless
    Lokar CC-1603HT Tuned-Port Cruise Control Cable, Stainless
    x
                
    • Lokar cruise control cable is for use with Rostra control kits. Kit includes 4 foot stainless outer housing designed with a specialty extruded liner for extended life of the cable and 5 feet of stainless inner wire, which replaces black plastic cable in Rostra kits. Cables are u-cut-to-fit inside and outside of the firewall. All billet aluminum fittings, stainless hold down clip and mounting bracket. Mount cable to carburetor with Lokar's stainless carburetor bracket and return springs.
    • For Use w/Rostra Control Kits
    • Stainless Steel Housing
    • 5 in. Stainless Inner Wire/4 in. Outer Housing
    • U-Cut-To-Fit Inside And Outside Of Firewall
    • Billet Aluminum Fittings
    • Incl. Hold Down Clip/Mounting Bracket
    • Made In The U.S.A.
    • Lifetime Warranty
  • Painless Wiring 70402 Two Wire Weatherpack Connectors
    Painless Wiring 70402 Two Wire Weatherpack Connectors
    x
                

    A real water-tight connection. Each number consists of one male and one female component. Accepts 14 - 16 gauge wire.

  • Universal Headlight Switch With Hi/Low
    Universal Headlight Switch With Hi/Low
    x
                

    This headlight switch has four positions. In is off, out one notch is park lights, out another notch is lows beams, and all the way out is high beams. Screw type terminals. 3/8" mounting hole.

    910-80154 Instructions (PDF) 

  • Ford 1933-1936 Car/1945-1952 Pickup Tail Light Lens, Red Glass
    Ford 1933-1936 Car/1945-1952 Pickup Tail Light Lens, Red Glass
    x
                These reproduction red glass tail light lens are for 1933-1936 Ford cars  and 1945-1952 pickup trucks.  They are for the passenger side and feature specs of the originals. 
    • OEM replacement
    • Red glass lens
    • 1933-1936 Ford cars and 1945-1952 pickups
    • Fit passenger side
    • Sold each
  • Lokar SP-1505HT Pre-1948 Ford Speedometer Cable Kit, Stainless Housing
    Lokar SP-1505HT Pre-1948 Ford Speedometer Cable Kit, Stainless Housing
    x
                Premium housing designed with a specially extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing are "U-Cut-to-Fit". Kit comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included)
    Lokar Speedometer Cables are designed to work with most cable driven aftermarket speedometer gauges (such as Auto Meter, Stewart Warner, VDO, Classic Instruments, etc.) or factory speedometer with a 5/8-18 male thread at the speedo.
    Lokar Speedometer Cables are designed to fit into the transmission gear adapter (not supplied in Chevy or Chrysler Lokar Kit). Customer must have the trans end adapter and speedometer gear for all Chevy and Chrysler applications. For Ford applications, the gear adapter is supplied in the Lokar Kit. Customer must supply the speedo gear and speedo gear retainer clip.
    • All Lokar Speedometer Cables are seven feet (7') long
    • Designed to be "U-Cut-to-Fit".
    • Additional length cable in black or stainless housing is available upon request for an additional charge.
    • Must have a 3/4 - 20 female thread at the speedometer
  • Universal Stainless Steel Headlight Mounting Cup
    Universal Stainless Steel Headlight Mounting Cup
    x
                Use these stainless steel cone mounting cups to add style to your headlight/taillight application while supporting the light shell at the base.  Available in a plain finish as well. (91061034)
    • Great for headlights and taillights
    • Designed for use with universal mounting bracket (91061026)
  • 1950 Pontiac Red Tail Light Assembly
    1950 Pontiac Red Tail Light Assembly
    x
                

    The 1950 Pontiac clean round shape and domed lens of the tail light have been a staple on hot rods for more than five decades. This beautiful taillight assembly is a faithful reproduction of that classic design and features a glass lens just like the original. This taillight makes a perfect finishing touch on a wide variety of street rods and customs – or you could even use it on a '50 Pontiac!

    • Classic shape and design
    • Easily adaptable to a variety of vehicles
    • Red glass lens
    • Chrome bezel
    • Rubber mount gasket included
    • Single 1157 dual-filament bulb
  • Painless Wiring 60218 1999-2005 GM Vortec Engine Harness, Extended
    Painless Wiring 60218 1999-2005 GM Vortec Engine Harness, Extended
    x
                Please view the product's page for more information
            
  • Tribute T Headlight Bracket Mount Kit
    Tribute T Headlight Bracket Mount Kit
    x
                These headlight mount kits are designed for use with our Tribute T kit cars but will also work as a universal kit for a variety of other applications.  They accept Dietz style headlights.
    • 5/16" mounting holes 2" center to center
    • 1/2" ID sleeve for light mounting bolt
    • Great for headlights and taillights
    • Accepts Dietz style headlights
    • Kit includes:
      • (2) mounting cups
      • (2) rubber mount pads
      • (4) mounting bolts
  • Universal Dash Harness for Mechanical Speedometer
    Universal Dash Harness for Mechanical Speedometer
    x
                

    If you want to keep your under-dash area organized or you think that you will need to remove gauges from time to time, then you need to install this universal gauge harness. It will connect to all major brand gauges including Auto Meter and VDO and works with most dash layouts and sizes.

    Includes all connections for volt meter, oil pressure, temperature, tachometer, speedometer and fuel gauges, plus high beams and turn signals. For cable drive speedometer only.

    Universal Dash Mechanical Speedometer Wiring Instructions (PDF) 

  • Modern Driveline Electric Speedometer Harness for Ford TKO Transmission
    Modern Driveline Electric Speedometer Harness for Ford TKO Transmission
    x
                

    This is a new electric speedometer pigtail harness connector for Ford TKO 500, 600 transmissions.

    • Manufactured from quality components
    • Factory quality standards
    • Fits Ford applications
    • TKO 500, 600 transmissions

     

  • Replacement Quartz Halogen H-4 Headlight Bulb, 12 Volt
    Replacement Quartz Halogen H-4 Headlight Bulb, 12 Volt
    x
                

    Quartz halogen H-4 bulb directly replaces standard-type 12 volt bulbs for improved night time visibility. Has a 60 watt high beam, 55 watt low beam.

    Wiring Chart (GIF)

  • Modern Driveline Electric Speedometer Harness for GM TKO Transmission
    Modern Driveline Electric Speedometer Harness for GM TKO Transmission
    x
                

    This is a new electric speedometer pigtail harness connector for GM TKO transmissions.

    • Manufactured from quality components
    • Factory quality standards
    • Fits GM applications
    • TKO transmissions
  • 1938-1939 Lincoln Zephyr LED Tail Lights
    1938-1939 Lincoln Zephyr LED Tail Lights
    x
                

    These tail lights are flat on the back for easy mounting to most any surface, as each only needs 3 holes (1/4" Diameter) drilled in the mount surface. Wired for tail light, stoplight, and turn signals. 12V. Includes base gasket.

    • Ground - Green
    • Tail - Black
    • Stop - Red
    • Turn - Yellow (pulsing)
  • 1938-1939 Ford Red Tail-Stop Lights
    1938-1939 Ford Red Tail-Stop Lights
    x
                

    Polished stainless steel rim taillights for 1938-1939 Ford. These taillights have a glass lens, single 1157 dual-filament bulb, and match the original tail lights closely.

    For 12 volt systems only.

     

  • Speedway 2007-2008 LS2/LS3/LS7 Engine Wiring Harness
    Speedway 2007-2008 LS2/LS3/LS7 Engine Wiring Harness
    x
                

    Take the fear out of electronic fuel injection! These engine wiring harnesses are designed to make your engine transplant effortless. Each new harness contains in-depth application-specific instruction sheets, clearly marked factory GM connectors, labeled GXL jacketed wire, GM color coding, and pre-fitted corrugated slit loom for an extra value and professional look. All un-needed emissions wiring is eliminated to make the install as simple and reliable as possible.

    2007-2008 LS2/LS3/LS7 - E38 58X Reluctor w/ Non Electric Transmission

    • Made from premium grade GXL jacketed automotive wire
    • Most wiring is larger gauge than stock application for durability
    • No splices to reduce points of failure
    • All primary grounding is done at the head or block and grounding points are isolated from each other to reduce electrical interference and minimize ground looping
    • Harness wiring matches GM wiring configuration and jacket colors follow GM color coding for easy identification
    • All electrical connectors are made by Delphi or Packard and are direct fit for GM cars and trucks
    • Can be installed to run engine in 20 minutes, but figure 4-6 hours for a professional installation
    • Diagnostic connector or OBD2 port for connection to scanners and tuning tools
    • Made in the USA.
  • Painless Wiring 60103 1990-92 GM TPI Speed Density Engine Harness
    Painless Wiring 60103 1990-92 GM TPI Speed Density Engine Harness
    x
                

    Take advantage of GM's electronic engine management system with this Painless Wiring Harness. Complete stand alone harness allows you to install late model GM fuel injected engine and correct computer into almost any chassis. Harness includes all needed connections for fuel injection operation: ECM, MAP, O2, TPS, ESC, IAC, IAT, CTS, Knock, Injectors, OBD1 w/SES light, VSS and TCC solenoid. 

    This standard length harness allows four feet from the back of the intake manifold to where the fuseblock and ECM mount. Perfect for those that plan to mount these components under or behind the dash or glove box.

    Besides the obvious economy and driveability benefits, check out these other great features that make it easy and painless to install:
    • Foolproof factory connections
    • ALDL (diagnostic) plug
    • Computer controlled fuel pump provision
    • Wired for 2004R or 700R4 transmission and EGR solenoid
    • GM color code
    • Closed loop design

    1990-1992 GM TPI Wiring Instructions (PDF)

  • Stainless License Plate Light
    Stainless License Plate Light
    x
                
    • Fully polished stainless steel housing
    • 12 volt operation
    • Mounting hardware included
    • Uses common replaceable wedge-type dashlight bulb
  • Ford 1933-1936 Car/1945-1952 Pickup Tail Light Lens, Blue Dot, Red Glass
    Ford 1933-1936 Car/1945-1952 Pickup Tail Light Lens, Blue Dot, Red Glass
    x
                

    These replacement red glass tail light lens are for 1933-1936 Ford cars and 1945-1952 pickup trucks.  They are for the passenger side and feature the classic Lynx-Eye blue dot in the center.  Gives a bright lavender appearance when brake light comes on.

    • Original replacement
    • Red glass lens
    • Classic Lynx-Eye blue dot in center
    • 1933-1936 Ford cars and 1945-1952 pickups
    • Sold each
  • Small Model T Aluminum Cowl Lights
    Small Model T Aluminum Cowl Lights
    x
                

    Small style, 7-1/2" tall with 3" diameter lens. Polished aluminum. Dual element bulb. Choose red, blue dot or amber lens. 12 volts.

    Note: Does NOT come with brackets.

    916-62003 Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 11