Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 25

Products

Electrical, Lighting and Body

Shop T-Bucket Electrical Wiring & Lights At Speedway Motors

Speedway Motors is your one stop shop for T-Bucket wiring and lighting. Make wiring your roadster simple with easy-to-use wiring harnesses and step by step instructions. Finally, finish off your T-Bucket project with specialty headlights, LED tail lights and vintage cowl lights. Let Speedway Motors eliminate any and all of your roadster electrical system problems!

Featured Products
  • Speedway Universal 20 Circuit Wiring Harness
    Speedway Universal 20 Circuit Wiring Harness
    (Part #91064027)
    x
                Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

    Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

    • Harness has 20 circuits, of which 18 are fused
    • Taillight leads measure 17' long
    • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

    Wiring Harness Installation Instructions (PDF)

    Note: This kit includes ribbon plugs to connect to most GM and aftermarket columns, in addition to including plugs to connect to the ignition switch on "keyed" GM columns.

  • Lokar CCP-1603HT Tuned-Port Cut-To-Fit Cruise Control Cable, Stainless
    Lokar CCP-1603HT Tuned-Port Cut-To-Fit Cruise Control Cable, Stainless
    (Part #491CCP1603HT)
    x
                Lokar cruise control cable is for use with Rostra control kits. Kit includes 4 foot stainless outer housing designed with a specialty extruded liner for extended life of the cable and 5 feet of stainless inner wire, which replaces black plastic cable in Rostra kits. Cables are u-cut-to-fit inside and outside of the firewall. All billet aluminum fittings, stainless hold down clip and mounting bracket. Mount cable to carburetor with Lokar's stainless carburetor bracket and return springs.
    • For Use w/Rostra Control Kits
    • Stainless Steel Housing
    • 5 in. Stainless Inner Wire/4 in. Outer Housing
    • U-Cut-To-Fit Inside And Outside Of Firewall
    • Billet Aluminum Fittings
    • Made In The U.S.A.
    • Lifetime Warranty
  • Tridon Replacement Turn Signal Flasher Unit, 3-Prong
    Tridon Replacement Turn Signal Flasher Unit, 3-Prong
    (Part #91064046)
    x
                

    These state-of-the-art electronic flashers work with standard bulbs. 12 volt operation (will not work on 6 volt systems). Made in the U.S.A.

    • Replacement for turn signal
    • Works with standard bulbs
    • 12 volt operation only
    • 3-Prong
    • Made in the U.S.A.

    Flasher function:

    • The X terminal is the + 12v input
    • The P terminal output drives the flasher indicator
    • The L terminal drives the load (bulbs)

    Note: We recommend the use of our grounded LED flashers for use with LED's (910-64112 3-prong).

  • MSD 8171 4-Pin Weathertight Connector, 1 qty
    MSD 8171 4-Pin Weathertight Connector, 1 qty
    (Part #5478171)
    x
                If you need electrical connectors that are unaffected by water, chemicals, vibration, temperature or dirt, and that will not come apart accidently, then you need MSD Weathertight Connectors.The Weathertight connectors are molded from a special nylon material to withstand temperatures from -40° to +257°F and are indexed to prevent mismatching. Positive locks let you know when the connectors are completely joined by producing an audible CLICK. No click means no connection.For maximum electrical isolation, each terminal has its own tower so there is no chance of shorting between the wires. Each terminal tower utilizes self-lubricating silicone seals for protection against water, dust, oil, and other engine compartment fluids.
            
  • MSD 8174 1-Pin Weathertight Connector, 1 qty
    MSD 8174 1-Pin Weathertight Connector, 1 qty
    (Part #5478174)
    x
                If you need electrical connectors that are unaffected by water, chemicals, vibration, temperature or dirt, and that will not come apart accidentally, then you need MSD Weathertight Connectors.The Weathertight connectors are molded from a special nylon material to withstand temperatures from -40° to +257°F and are indexed to prevent mismatching. Positive locks let you know when the connectors are completely joined by producing an audible CLICK. No click means no connection.For maximum electrical isolation, each terminal has its own tower so there is no chance of shorting between the wires. Each terminal tower utilizes self-lubricating silicone seals for protection against water, dust, oil, and other engine compartment fluids.
            
  • Fuse Block Eight Push-in Fuses
    Fuse Block Eight Push-in Fuses
    (Part #91064060)
    x
                

    Allows easy installation of extra fuses. Accepts push-in style ATC and ATO fuses.

    • Black thermoplastic construction
    • Recessed contacts for extra safety
    • 25 amps max per circuit @ 12V to 24V DC
    • 150 amps max total for the block @ 12V DC
  • 1928-1931 Ford Model A Stainless Tail Lights
    1928-1931 Ford Model A Stainless Tail Lights
    (Part #91127001)
    x
                

    Polished stainless steel housing with glass lenses. An excellent replacement or addition to your Model 'A' Ford. Left tail light has lenses on the bottom to illuminate a license plate. Choose left or right. 12 volt operation.

    • 3.851" diameter
    • 3" depth
    • 3.851" height
    • 1-3/4" mount 

    Wire colors:

    • Housing - Ground
    • Tail - Black
    • Stop - Green

    These tail lights have two bulbs in them that are of a single filament style. 

  • Universal LED Indicator Light Bulbs, 5/32 Inch
    Universal LED Indicator Light Bulbs, 5/32 Inch
    (Part #91131050)
    x
                

    You can use these LED's for almost anything from dash lights to front turn signals. Simple push-in installation with bezel. Direct hook up for 6-12 volts and does not require a resistor.

    Available in amber, green and red colors.

Filter

"T-Bucket, Electrical, Lighting and Body" Page 1 of 25

Page 1 of 25

  • Modern Driveline Reverse Switch Harness - GM T5, T-56 Transmissions
    Modern Driveline Reverse Switch Harness - GM T5, T-56 Transmissions
    (Part #91070002)
    x
                

    These harnesses for transmission neutral safety switch/reverse light switches are designed for use with GM T5 and T56 transmissions.

    • Factory style
    • For GM T5 and T56 transmissions

     

  • Halogen Tail Light Bulbs, 1157 Offset Mounting Pins
    Halogen Tail Light Bulbs, 1157 Offset Mounting Pins
    (Part #91131016)
    x
                

    Those other super bright, super high powered tail light bulbs may be easy to see, but they also generate enough heat to discolor your lens and burn the paint.

    Halogen tail light bulbs are brighter than standard bulbs, but use less energy, which means they burn cooler. 12 volt only.

    This bulb is shorter than a 1157 bulb and measures only 1-3/4" from bottom to end of the tip. From the pin to tip is 1-1/2".



     

  • Tall Model T Cowl-Tail Lights, Black
    Tall Model T Cowl-Tail Lights, Black
    (Part #91117400)
    x
                

    Features a 12 volt dual element bulb and can be used as a tail light or a cowl light. 9-1/2" tall with 3" diameter lens. Specify red or amber lens.

    Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

    Cowl Light Installation Instructions (PDF)

  • 1932 Ford Stainless Tail Lights
    From: $29.99
    Product Rating: 4.67 Stars
    1932 Ford Stainless Tail Lights
    (Part #91137005)
    x
                

    These are an exact duplicate of the original 1932 Ford glass lens tail lights. Left light has a lens to illuminate license plate. Choose left or right.

    • 12 volt bulb
    • Highly polished stainless steel housing & rim
    • Cloth braided wire loom
    • Stainless steel screws
    • Glass red lens
    • 3-7/8" diameter, 2-3/8" depth
    • 2-11/16" overall depth (includes the wire retainer on the back of the lamp)

     

  • Fuse Block for Glass Fuses
    $9.99
    Product Rating: 5.00 Stars
    Fuse Block for Glass Fuses
    (Part #91064004)
    x
                

    Allows easy installation of extra fuses or for use in basic electrical systems. Accepts 7 glass fuses. Also included is two connector strips, one ties three fuses to a common power source and one ties two fuses to a common power source.

  • MSD 8183 2-Pin Deutsch Connector, 16 gauge
    MSD 8183 2-Pin Deutsch Connector, 16 gauge
    (Part #5478183)
    x
                There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

    Installation Instructions (PDF)

  • Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    New
    Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    (Part #91050302)
    x
                

    This heavy duty lightweight switch panel from Painless Performance is designed to mount to a roll bar using standard metal hose clamps. Lighted rocker switches are color coded for quick reference.  All of the circuits are individually fused and are easily accessible for quick testing and replacement. This kit comes complete with 18 ft. of TXL wire, using fully insulated terminals. Made in the USA!

    Installation Instructions (PDF) 

    The Kit Controls:

    • Start
    • Ignition
    • Fuel pump
    • Electric fan/water pump (Switch up position - fan on only / Switch middle position - all off / Switch down position - fan & water pump on)
    • Two accessories

     

     

  • Lokar CC-1600U Carbureted Cruise Control Cable, Black
    Lokar CC-1600U Carbureted Cruise Control Cable, Black
    (Part #491CC1600U)
    x
                
    • Lokar cruise control cable is for use with Rostra control kits. Kit includes 4 foot stainless outer housing designed with a specialty extruded liner for extended life of the cable and 5 feet of stainless inner wire, which replaces black plastic cable in Rostra kits. Cables are u-cut-to-fit inside and outside of the firewall. All billet aluminum fittings, stainless hold down clip and mounting bracket. Mount cable to carburetor with Lokar's stainless carburetor bracket and return springs.
    • For Use w/Rostra Control Kits
    • Stainless Housing
    • 5 in. Stainless Inner Wire/4 in. Outer Housing
    • U-Cut-To-Fit Inside And Outside Of Firewall
    • Billet Aluminum Fittings
    • Incl. Hold Down Clip/Mounting Bracket
    • Made In The U.S.A.
    • Lifetime Warranty
  • Speedway 7 Inch Fluted Replacement Headlights w/ Amber Turn Signal
    Speedway 7 Inch Fluted Replacement Headlights w/ Amber Turn Signal
    (Part #9106121)
    x
                

    Speedway's 7" replacement Fluted H4 Headlights allow you to have "the look" with out breaking the bank. Features a chrome plated plastic reflector with a glass lens and an "amber" turn signal lens. Includes a H4 Halogen bulb.

    These headlights have a separate 94-style single filament bulb which can be used as a turn signal or a running lamp (not both). 

    • 6-5/8" headlight O.D.
    • Wiring pigtail for turn/running light is included
    • Wiring pigtail for headlight NOT included
    • Uses common 3-prong headlight plug-in

    Headlight Wiring Chart (GIF)

    Installation Instructions (PDF)  

  • MSD 8961 MSD High Current Relay, SPST
    MSD 8961 MSD High Current Relay, SPST
    (Part #5478961)
    x
                MSDs High Current Relays are what you need to activate accessories that draw high current. These Relays are very reliable due to the fully automated manufacturing process and sophisticated coil winding procedure. The SPST High Current Relay is rated at 30 amps with an input voltage of 12 volts DC. The relay is ideal for use with the MSD RPM Activated Switch when 12 volts are responsible for activating a high current device such as a nitrous solenoid.The DPST relay is also rated at 30 amps with a 12 volt input voltage. This Relay is the best choice when 12 volts are required to activate multiple high current devices at the same time such as multiple stage nitrous solenoids.

    Installation Instructions (PDF)

  • MSD 8190 10 Male Pins and Seals
    MSD 8190 10 Male Pins and Seals
    (Part #5478190)
    x
                Male pins and seals for use with Weathertight Connectors.
            
  • MSD 8187 4-Pin Deutsch Connector, 12-14 gauge
    MSD 8187 4-Pin Deutsch Connector, 12-14 gauge
    (Part #5478187)
    x
                There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

    Installation Instructions (PDF)

    • Sealed Connectors
  • EMPI 16-2059 Bullet Light Assembly, Convex Red, Each
    EMPI 16-2059 Bullet Light Assembly, Convex Red, Each
    (Part #1412059)
    x
                

    EMPI Bullet lights feature a high power 12-Volt 50 watt halogen bulb with a mirror finish reflector. The compact (approximately 3-1/2" tall by 2-1/2" diameter) housing is made of precision machined aluminum.

    • Bullet Light w/ Red Lens
    • Precision machined aluminum housing
    • Mounts on flat or slightly rounded surfaces
    • Sold Each

  • MSD 8184 2-Pin Deutsch Connector, 12-14 gauge
    MSD 8184 2-Pin Deutsch Connector, 12-14 gauge
    (Part #5478184)
    x
                There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

    Installation Instructions (PDF)

    • Waterproof
    • Quick Connect
  • MSD 8910 Tach Adapter
    $50.99
    MSD 8910 Tach Adapter
    (Part #5478910)
    x
                If, after installing an MSD Ignition Control, your ta­chometer, fuel pump relay or electronic fuel injection (in foreign vehicles) doesnt operate correctly, your ap­plication may require a Tach Adapter. This is due to the trigger signal not being strong enough to trigger both the MSD and the factorys components.There are a few Tach Adapters available and for more information see pages 152 and 153. Each Adapter is simple to wire in and will have your MSD and vehicle firing away in no time! If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series Ignition with its white wire or points terminal, you will need the PN 8910 Tach Adapter. The PN 8910 will correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off the tach output terminal of the MSD Ignition Unit.

    Installation Instructions (PDF)

    Installation Instructions (PDF)

    • Lokar SP-1503HT Ford Speedometer Drive Cable Kit, Stainless
      Lokar SP-1503HT Ford Speedometer Drive Cable Kit, Stainless
      (Part #491SP1503HT)
      x
                  

      The finishing touch to your mechanical (cable-drive) speedometer installation in your Ford. Kit includes a 7 ft. long braided stainless steel housing and 7' inner cable (you trim to length), billet aluminum fitting ends and instructions.

      Works with all cable-drive aftermarket and original equipment speedometers that have a male 5/8"-18 threaded connection. The transmission end has the standard Ford end with retaining clamp.

       Ford Installation Instructions (PDF) 

    • Lokar SP-1506U Early Ford Speedo Cable Kit w/Ford End, Black Housing
      Lokar SP-1506U Early Ford Speedo Cable Kit w/Ford End, Black Housing
      (Part #491SP1506U)
      x
                  Premium housing designed with a specially extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing are "U-Cut-to-Fit". Kit comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included)
      Lokar Speedometer Cables are designed to work with most cable driven aftermarket speedometer gauges (such as Auto Meter, Stewart Warner, VDO, Classic Instruments, etc.) or factory speedometer.
      Lokar Speedometer Cables are designed to fit into the transmission gear adapter (not supplied in Chevy or Chrysler Lokar Kit). Customer must have the trans end adapter and speedometer gear for all Chevy and Chrysler applications. For Ford applications, the gear adapter is supplied in the Lokar Kit. Customer must supply the speedo gear and speedo gear retainer clip.
      • All Lokar Speedometer Cables are seven feet (7') long
      • Designed to be "U-Cut-to-Fit".
      • Additional length cable in black or stainless housing is available upon request for an additional charge.
      • Must have a 3/4 - 20 female thread at the speedometer
    • Lokar XBAG-6109 Midnight Series Oval Billet Aluminum Dimmer Cover
      Lokar XBAG-6109 Midnight Series Oval Billet Aluminum Dimmer Cover
      (Part #491XBAG6109)
      x
                  
      • Oval Billet Aluminum Dimmer Cover – Brushed
      • Black Anodized Billet Aluminum 
      • Made In The U.S.A.

       

    • Universal Headlight Mount
      $19.99
      Product Rating: 4.00 Stars
      Universal Headlight Mount
      (Part #91061026)
      x
                  
      • 5/16" mounting holes 2" center to center
      • 1/2" ID sleeve for light mounting bolt
      • Great for headlights and taillights
      • Use with mounting cups 91061034
    • 1932 Ford Tail Light LED Conversion Lens
      1932 Ford Tail Light LED Conversion Lens
      (Part #91137026)
      x
                  These direct replacement tail light lenses will convert your 1932 Ford Deuce tail lights to powerful and bright LED lights. Choose left or right sides.
      • 17 Super Bright Red LEDs
      • Drivers side (Left side) includes a 4 LED White License Light (primary picture)
      • Epoxy coated, fully sealed electronics
      • Two 1156 plugs
      • Solid state circuit board for 12V systems 
      1932 Ford LED Tail Light Conversion Instructions (pdf)
    Goto Previous PagePrevious Page
    1 2 3 4 5 ... 25