Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 34

Products

Cooling

Shop T-Bucket Cooling At Speedway Motors

Speedway Motors wants to make sure your T-Bucket stays as cool as it looks! Our T-Bucket aluminum radiators and short water pumps will keep the temperature down while you cruise the town. Top it off with a polished radiator cap, dog bone cap, winged radiator cap, cooling fan, and fan shroud. Give your T-Bucket a vintage look with a Model T motor meter and Model T filler neck. Speedway also offers all the radiator hoses, pulley spacers, and support brackets needed to complete the job.

Featured Products
  • Speedway Electric Cooling Fan
    From: $29.99
    Product Rating: 1.00 Stars
    Speedway Electric Cooling Fan
    (Part #910158)
    x
                

    Help your engine keep cool by adding an electric cooling fan to your radiator. Electric fans are far more efficient than mechanical engine driven fans because they free up horsepower and only run when you want them to (when used with a fan controller, not included). Plus, most electric fans can be mounted ahead of the radiator or behind the radiator, with the more efficient location being on the engine side of the radiator.

    • Choose your size diameter (10", 12", 14", 16")
    • CFM Ratings per size:
      • 10" - 800 CFM
      • 12" - 1000 to 1100 CFM
      • 14" - 1200 to 1300 CFM
      • 16" - 1750 to 1850 CFM

    Note: These fan CFM ratings are based on 13 volt input (normal for auto voltage) and on variance in motors used.  Some fans may run better than others depending on your specific application.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Aluminum Fan Spacers with Bolts
    Aluminum Fan Spacers with Bolts
    (Part #91015720)
    x
                Aluminum fan spacers are required for maximum air transfer.  Fan should be 2" - 4" from radiator.  Spacers available from 1/2" to 2-1/2" thick in 1/4" increments.  Complete with bolts.  Fits 5/8" shaft. 
            
  • 1949-1953 Flathead Ford V8 Water Pump Gaskets
    1949-1953 Flathead Ford V8 Water Pump Gaskets
    (Part #91015537)
    x
                

    Whether you're installing original Flathead water pumps or Speedway's all-new redesigned pumps, you'll need fresh gaskets to seal them to the block. These gaskets are for 1949-1953 Ford Flathead V8 water pumps. Sold as a pair.

  • Orange Thermal Sleeve
    From: $7.99
    Orange Thermal Sleeve
    (Part #70400)
    x
                

    Looking for a durable way to protect your hoses or wires from excessive heat? If so, this thermal sleeve is sure bet. It features a soft knitted fiberglass interior that won't chafe which is coated with a thick layer of silicone. When combined, the materials will withstand 500°F of continuous heat, or 2000°F for a short duration. The sleeving is even designed to shed sparks while resisting hydraulic fluids and lubricating oil. Exposure to open flames will char the silicone coating but won't scorch the fiberglass inner layer.

    Great for electrical wires, cables and fluid lines. Available in 3/4", 1" & 2" I.D. sizes and each is sold by the foot.

  • Modular Electric Water Pump Adapters for Small Block Chevy
    Modular Electric Water Pump Adapters for Small Block Chevy
    (Part #911885)
    x
                

    Check out our adapters for our newest Small Block Chevy high volume electric water pump. These engine water pump adapters are machined from billet aluminum and the fit & finish is excellent. 

    • Aluminum
    • Polished
    • Sold as a Pair
    • Designed to work with our modular electric water pump housing (911880)
  • 13 Inch Stainless Steel Expansion Tank
    13 Inch Stainless Steel Expansion Tank
    (Part #91102213)
    x
                

    2" outside diameter, 1⁄4" O.D. nipples - works with any radiator. Stops loss of coolant and prevents pulling air into system when cooling off. Polished stainless steel expansion reservoir tank with screw-on cap.

    • Heavy wall construction
    • Billet screw in cap
    • Clear neoprene seal

    911-02213 Instructions (PDF)

  • SPAL Thermoswitch Relay and Wiring Harness Kit
    SPAL Thermoswitch Relay and Wiring Harness Kit
    (Part #91064028)
    x
                

    This easy to use cooling fan relay kit includes a labeled wiring harness, 40 amp relay, fuse holder and coolant sensor. Available with 185° on/165° off or 195° on/175° off. Works great with the Spal Pulse-Width Fan Controller.

    • Relay wiring kits are a must-have when installing an electric fan
    • Designed to safely integrate with OEM wiring
    • Waterproof 40/50 Amp relay
    • Printed wires (for ease of installation)
    • 3/8" NPT (National Pipe Thread) stainless steel switch
    • Optional switched override capability
    910-64028 Instructions (PDF)
  • King Chrome 1966-86 Small Block Chevy Water Neck Bolt Kit
    King Chrome 1966-86 Small Block Chevy Water Neck Bolt Kit
    (Part #91303810)
    x
                A bolt kit for a 1966-1986 S/B Chevy water neck. All feature that unique King Chrome premium chrome plating. Fits Small Block Chevy (SBC).
            

Filter

"T-Bucket, Cooling" Page 1 of 34

Page 1 of 34

  • SPAL Thermoswitch Relay and Wiring Harness Kit
    SPAL Thermoswitch Relay and Wiring Harness Kit
    (Part #91064028)
    x
                

    This easy to use cooling fan relay kit includes a labeled wiring harness, 40 amp relay, fuse holder and coolant sensor. Available with 185° on/165° off or 195° on/175° off. Works great with the Spal Pulse-Width Fan Controller.

    • Relay wiring kits are a must-have when installing an electric fan
    • Designed to safely integrate with OEM wiring
    • Waterproof 40/50 Amp relay
    • Printed wires (for ease of installation)
    • 3/8" NPT (National Pipe Thread) stainless steel switch
    • Optional switched override capability
    910-64028 Instructions (PDF)
  • Model T Dog Bone Radiator Cap, Chrome, Drilled
    Model T Dog Bone Radiator Cap, Chrome, Drilled
    (Part #91112205)
    x
                These Dog Bone caps are a reproduction of an original aftermarket  accessory that were available during the Model T era. These cast chrome  caps have a hole drilled in them for use with Jr. Moto-Meters and are 6-1/2”  long. The Dog bone style makes removing your radiator cap easier by  giving you a more convenient area to grip and to twist turn the hot cap,  as the  arms are outboard and they cool off in the air. Many people  like using it to add some style to your Model T.

    Model T Dog Bone Radiator Cap

    • Fits 1909-1927 Ford Model T radiators
    • Screws into stock filler necks
    • 6-1/2" long (end to end)
    • Drilled for Motor Meters
    • Chrome finish

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles

  • 15 Inch Stainless Steel Expansion Tank
    $32.99
    $34.99
    Product Rating: 4.72 Stars
    15 Inch Stainless Steel Expansion Tank
    (Part #91102215)
    x
                

    2" outside diameter, 1⁄4" O.D. nipples - works with any radiator. Stops loss of coolant and prevents pulling air into system when cooling off. Polished stainless steel expansion reservoir tank with screw-off cap.

    • Heavy wall construction
    • Billet screw in cap
    • Clear neoprene seal

    911-02215 Instructions (PDF)

  • Walker 347 Radiator Transmission Cooler 45 Degree Fittings
    Walker 347 Radiator Transmission Cooler 45 Degree Fittings
    (Part #820347)
    x
                1/8" NPT and screw into most standard radiator transmission coolers. 45° for 5/16" steel line. 
            
  • AFCO 1923 T-Bucket Aluminum Radiator, Chevy Engine
    AFCO 1923 T-Bucket Aluminum Radiator, Chevy Engine
    (Part #10680167)
    x
                Please view the product's page for more information
            
  • Speedway Adjustable Small Block Chevy Aluminum Short Water Pump
    Speedway Adjustable Small Block Chevy Aluminum Short Water Pump
    (Part #91015582)
    x
                

    Speedway's adjustable water pump is tried, tested and true. It has great flow, superior quality and standard features that are typically only available on water pumps costing twice as much. State-of-the-art aluminum casting and a precision impeller provide equal flow to both cylinder banks. If you're using a cog belt on your race car, this is the pump you want since it's adjustable. The 1/2" mount holes in this pump are larger than normal, allowing it to be moved up or down slightly to help with belt tension.

    • Adjustable mounting holes
    • High flow and pressure rates
    • Adjustable cam stop
    • Extra-thick fan hub
    • 3/4" inch heavy duty bearing
    • Pressed-fit and set-screw-retained fan hub
    • Large-diameter shaft and reinforced housing make it ideal for oval-track applications

    910-15582 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump

  • U-Weld-It Custom Aluminum Radiator Kit, 26 x 19 Inch
    U-Weld-It Custom Aluminum Radiator Kit, 26 x 19 Inch
    (Part #910601)
    x
                
    Build and design your own radiator with these aluminum u-weld-it kits.  They come with everything you need to create a custom radiator to fit your specific application.  These radiators can be used as either a cross-flow or down-flow.
    • Overall Dimensions:  25-5/8" x 19-9/16" x 3-1/8"
    • Core Dimensions:  21" x 18" x 2-1/4"

    Kit Includes:

    • (1) 1-1/2" Hose connection
    • (1) 1-3/4" Hose connection
    • (1) Billet Aluminum filler neck
    • (1) Overflow tube
    • (1) Weld-on Bung
    • (1) Draincock

    Note: This kit requires aluminum welding and fabrication.  Kit is sold as an unfinished product.  Standard warranties DO NOT APPLY.

  • Mr Gasket 2471S Thermocap Radiator Cap, 16 Lb.
    Mr Gasket 2471S Thermocap Radiator Cap, 16 Lb.
    (Part #5502471S)
    x
                

    How handy is this! The built-in calibrated thermometer on this chrome-plated 16 lb. radiator cap makes it easy to check your coolant temp - and to know when its safe to remove the cap. Fits radiators on most domestic vehicles.

    • Helps to prevent burn injuries
    • Integrated coolant reclamation valve works great with your coolant recovery system
    • Your radiator can reclaim coolant from your overflow bottle
    • Wide 30° to 270° F temperature range
    • Calibrated in centigrade and Fahrenheit
    • Color-coded temperature ranges
    • Chromed crown with a colored trim ring

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles

  • Walker 345 Radiator Transmission Cooler 90 Degree Fittings
    Walker 345 Radiator Transmission Cooler 90 Degree Fittings
    (Part #820345)
    x
                1/8" NPT and screw into most standard radiator transmission coolers.  90° for 5/16" steel line. 
            
  • Model T Filler Neck, Chrome
    $39.99
    Product Rating: 5.00 Stars
    Model T Filler Neck, Chrome
    (Part #91112221)
    x
                

    1917-1927 Model T style radiator filler neck designed for use with hex radiator caps or dog bone radiator caps. Solder it onto your radiator or secure it with a long bolt through the center of the grille shell.

    • Base is 2.935"
    • Height is 2.5"

    NOTE: Gull wing caps (91112206, 91112207, 91112208, and 91112209) do not fit these Model T Filler Necks.

  • Walker 346 Radiator Transmission Cooler Steel Line Straight Fittings
    Walker 346 Radiator Transmission Cooler Steel Line Straight Fittings
    (Part #820346)
    x
                1/8" NPT and screw into most standard radiator transmission coolers. Straight for 5/16" steel line. 
            
  • Plain Aluminum 348/409 Big Block Chevy Water Pump, Mechanical, Short
    Plain Aluminum 348/409 Big Block Chevy Water Pump, Mechanical, Short
    (Part #91015563)
    x
                

    If you are spending the money to build a 348 or 409 Chevy engine you had just as well put a high performance aluminum water pump on it. Threaded on top for heater hose fitting. Barbed hose fitting included. Comes with gaskets.

    • Threaded on top for heater hose fitting
    • Barbed hose fitting included
    • Comes with gaskets
    • Plain aluminum finish
  • Aluminum Upper Pulley Screw Kit
    Aluminum Upper Pulley Screw Kit
    (Part #91015440)
    x
                Set of four tapered seat bolts to properly secure upper aluminum water pump pulleys. Flat head cap. Black oxide finish. 
            
  • Griffin Radiators 4-227BX-HAC Flathead V8 1927 Ford Aluminum Radiator
    Griffin Radiators 4-227BX-HAC Flathead V8 1927 Ford Aluminum Radiator
    (Part #91734421)
    x
                

    Griffin Aluminum radiators give superior cooling over a brass/copper radiator. Features 2 rows of 1" tubes furnace brazed into the core which provides 40% greater tube-to-fin contact over a copper/brass radiator.

    • Built-in HD automatic transmission oil cooler
    • Hood support brackets are included
    • Brackets on side for gille shell
    • Brackets on top for support rods
    • Includes "dummy" filler neck

    Griffin Flathead Radiator Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Model T Hex Radiator Cap, Brass, Undrilled
    Model T Hex Radiator Cap, Brass, Undrilled
    (Part #91112215)
    x
                Screws into the top of stock Model T filler necks or our repros. Brass.
            
  • Gates 26501 Vulco-Flex Green Stripe Radiator Hose, 1-3/4 x 13-1/2 Inch
    Gates 26501 Vulco-Flex Green Stripe Radiator Hose, 1-3/4 x 13-1/2 Inch
    (Part #39526501)
    x
                

    Gates Vulco-Flex "Green Stripe" heavy duty radiator hoses include an internal spiral wire bonded to the I.D. of the hose, which prevents collapsing and kinking while positively retaining the spring.

    • Designed to replace straight or curved coolant hoses
    • Excellent flexibility, yet collapse and kink resistant
    • Heat resistant construction throughout
    • Approved for marine applications
  • Standard Transmission Cooler
    $19.99
    Product Rating: 5.00 Stars
    Standard Transmission Cooler
    (Part #91023101)
    x
                

    Use this 4-pass standard transmssion cooler in place of radiator lower tank cooler, or as a supplement to it.

    • 5" Tall x 16-3/4" Wide x 3/4" Thick
    • Includes 4 ft. rubber hose (3/8" I.D.), 4 stainless hose clamps and nylon mounting kit

    Transmission Cooler Installation Instructions (PDF)

  • Model T Gull Wing Cap, Brass, Undrilled
    Model T Gull Wing Cap, Brass, Undrilled
    (Part #91112206)
    x
                

    Graceful, swept-back wing shape adds class and style to any Model T. Screws onto radiator filler neck.*

    *NOTE: Cap does not fit our Model T filler neck 91112221 or 91112220.

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles.  

  • Gates 25478 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 17 Inch
    Gates 25478 Vulco-Flex II Flexible Radiator Hose, 1-1/2 x 17 Inch
    (Part #39525478)
    x
                

    Gates Vulco-Flex II radiator hoses include an interanl spiral wire which prevents collapsing and kinking. The spiral wire is retained within a groove on the inside of the hose.

    • Will bend in almost any direction
    • Replicates the angles of original equipment coolant hose
    • Improved sealing surface for greater leak resistance and increased flexibility
  • Modular Electric Water Pump Adapters for Big Block Ford
    Modular Electric Water Pump Adapters for Big Block Ford
    (Part #911889)
    x
                
    Check out our adapters for our newest Big Block Ford high volume electric water pump. These engine water pump adapters are machined from billet aluminum and the fit & finish is excellent. 
    • Aluminum
    • Polished
    • Sold as a Pair
    • Designed to work with our modular electric water pump housing (911880)
Goto Previous PagePrevious Page
1 2 3 4 5 ... 34