Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop T-Bucket Brakes At Speedway Motors

Nobody knows T-Bucket brakes like Speedway Motors! With the most experience in the T-Bucket brakes business, you can be assured that you are getting quality components for the most critical part of your car from top brands like Wilwood and AFCO . Speedway has disc and drum brake kits that are sure to provide the stopping power you need. We also have a huge selection of master cylinders, brake rotors, brake bleeders and brake pedals, plus the brake lines, fittings and proportioning valves you need to complete any brake system rebuild or upgrade.

Featured Products
Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2In
Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2In
SKU-91031945
x
            

Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car and 1937-47 1/2 ton Ford spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Ford/Mopar wheel bolt pattern of 5 on 4-1/2".

910-31945 Instructions (PDF)

Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
SKU-91031921
x
            

If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM emergency brake calipers, brake pads and hardware.

  • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
  • For Ford passenger car axles ONLY 
  • Fits axle with maximum flange diameter of 6-1/4" O.D.
  • For 15" and larger wheel applications ONLY

NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

Axle Flange Identification Chart (GIF)

910-31921 Instructions (PDF)

Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
SKU-91631926
x
            

Designed for a clean and simple install onto Model T, Model A, and 1932 Ford frame. The included 1" bore remanufactured master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The outlet ports are 3/8"-24 IFF. The bracket can be bolted or welded to the left frame rail (boxed or stock).

Kit includes a dual feed master cylinder, frame bracket, and a steel pedal arm w/ pad that can be easily modified for driver comfort.

Note: Will NOT work in conjunction with the factory clutch pedal. Intended for use with an Automatic Transmission.

916-31926 Instructions (PDF) 

Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

Basic Brake Kit 1978-88 GM Caliper to Early Ford Spindles
Basic Brake Kit 1978-88 GM Caliper to Early Ford Spindles
SKU-7024475
x
            Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car spindles. No machine work needed. Please see below for suggested 1973-77 GM type 11" brake rotor part #'s required.

Kit Includes:
  • GM to Ford brake brackets
  • 1978-Up hardware
  • Bearing and seal adapters
  • Seals
  • Inner bearing cups
  • Inner bearing cones
  • Spacers
  • Instructions
  • Does not include dust caps, washers or spindle nuts

This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for Street Rods based on 1932-48 Fords. However, for or a T bucket or early roadster, you might consider the Wilwood kits shown below.

702-4475 Instructions (PDF)

"T-Bucket, Brake" Page 1 of 21

  • Wilwood 140-7140-DP FDL Rear Brake Kit, New Big Ford 2.50 Off
    New
    Wilwood 140-7140-DP FDL Rear Brake Kit, New Big Ford 2.50 Off
    SKU-8351407140DP
    x
                Please view the product's page for more information
            
  • Lokar BAG-6005 Billet Aluminum Brake Pad w/Rubber, Brushed
    Lokar BAG-6005 Billet Aluminum Brake Pad w/Rubber, Brushed
    SKU-491BAG6005
    x
                
    • Made to cover the factory brake pad. Billet aluminum construction with hardware included. Made in the U.S.A. Lifetime warranty.
    • Designed w/1/2 X 20 Thread
    • Incl. 1/2 X 20 Stud In Kit
    • Can Be Mounted Centered Or Off Center
    • Rubber Insert Designed Pad
    • Made In The U.S.A.
    • Lifetime Warranty
  • Mild Steel -3 AN Brake Line Kit
    Mild Steel -3 AN Brake Line Kit
    SKU-6178560
    x
                

    This brake line kit bridges the gap between our stainless steel -3 AN kit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3 AN fittings to plumb your brake lines. 

    Since we don't know what calipers and master cylinder you will be using, these fittings are sold separately.

     
    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings
  • Aluminum Tube Nut Coupler, AN4 1/4 Inch
    Aluminum Tube Nut Coupler, AN4 1/4 Inch
    SKU-6176056
    x
                

    Use these tube nut couplers in conjunction with our tube sleeves (sold seperately) to seal bulkhead fittings to fuel cells, oil tanks and other applications using hard line fitting situations. You need to flare the tube to 37° to match the AN fittings. Not for use with 45° flared lines.

    Fitting Thread Application Chart (GIF)

  • Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    New
    Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    SKU-83512013529BK
    x
                

    The Forged Billet Dynalite-M is specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Black Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Replacement Carbon Steel Brake Rotors
    Replacement Carbon Steel Brake Rotors
    SKU-715DB206
    x
                For use on our spindle mount wire wheels. Bolts to back side of spindle mont wheels. Rotors are made from 3/16" carbon steel, and are 10" in diameter. These rotors are ground for flatness and have been clear zinc plated.
            
  • Stainless Steel Brake Line, 3/16 Inch
    Stainless Steel Brake Line, 3/16 Inch
    SKU-6178510
    x
                

    Our 3/16" stainless steel tubing is made from 304 grade (rated at 6000 psi) which is double annealed to allow easy flaring.

    NOTE: This line is intended to be used in conjunction with 37 degree AN # 3 style fittings which make use of a single flare. Stainless steel line will not work with 45 degree double flare 3/8"-24 flare nuts. We strongly suggest that the 37 degree single flare (flaring tool # 910-89524) be used when flaring this line for the AN # 3 tube nuts and sleeves.

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

    Brake System Builder Tip (GIF)

  • Lokar X70-BHR Midnight Series Black Billet Hand Brake Boot Ring
    Lokar X70-BHR Midnight Series Black Billet Hand Brake Boot Ring
    SKU-491X70BHR
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, OR billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings also available in black anodized.
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • The Hand Brake Boots are available in transmount or floor mount styles.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
  • Stainless Steel Drilled Brake Rotor for Spindle Mount Wheel
    Stainless Steel Drilled Brake Rotor for Spindle Mount Wheel
    SKU-715DB206SS
    x
                

    For extra stopping power and good looks. Bolts to the back side of spindle mount wheels. Brake rotors are shown here polished.

    • 10" O.D.
    • 3/16" thick
    • The center hole diameter is 2.691"
    • The bolt pattern contains four 5/16" holes on a 3.375" circle
  • Lokar 70-BHBT Billet Hand Brake Boot Ring with Transmount Boot
    Lokar 70-BHBT Billet Hand Brake Boot Ring with Transmount Boot
    SKU-49170BHBT
    x
                
    • Lokar shifter boots are black Naugahyde and all sets include a boot, polished stainless base ring, or billet aluminum ring with ball-milled edge and stainless screws. Available in transmount style or floor mount style. Boot hugs the hand brake lever.
    • Black Naugahyde
    • Boot Hugs The Hand Brake Lever
    • Made In The U.S.A.
    • Lifetime Warranty
  • Lokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finish
    Lokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finish
    SKU-4917000
    x
                

    This Lokar Floor Mount Emergency Hand Brake features a chrome plated steel e brake handle and is designed after the automotive industry standards. The ratchet cut gear plate and lock are heat treated for strength and safety. Special feature includes 4-point mounting capabilities for floor mount or side mounting for custom applications.

    Comes complete with clevis for installation with Lokar Emergency Brake Cables, Lokar # EC-80FU, Speedway Motors # 491-80FU suggested below. Cables are sold separately.

    Lokar Install Tip:  Every think about mounting the floor mount hand brake sideways in front of your seat?  You can!

  • Wilwood 140-2111-B Rear Brake Kit - Olds/Pontiac, 2.91 Offset
    Wilwood 140-2111-B Rear Brake Kit - Olds/Pontiac, 2.91 Offset
    SKU-8351402111
    x
                

    Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the uncommon Olds/Pontiac rear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

    • Piston Area (in²): 3
    • 1/8" NPT inlet
    • Minimum Wheel Diameter (in): 15
    • BP-10 Smart pads

    These kits do not have emergency brake provisions.

    Dynalite Rear Axle Kit Installation Instructions (PDF)

    Exploded Installation Schematic 

    Kit fits some 15" wheels. Check wheel clearance diagram in kit installation instructions before purchase.

    Axle Flange Identification Chart 

  • Lokar EC-8001U120 E-Brake Universal Connector Cable, 120 Inch, Black
    Lokar EC-8001U120 E-Brake Universal Connector Cable, 120 Inch, Black
    SKU-491EC8001U120
    x
                
    • Quality One-Piece Aluminum Adjusters
    • Aluminum Ferrule To Eliminate Fraying Of Housing
    • Extruded Liner For Extended Life Of The Cable
    • Stainless Inner Cable Resists Moisture
    • Allow Rear End Backing Plate Fitting To Be Removed
    • U-Cut-To-Fit Outer Housings
    • Black Housing
  • 90 Degree -3 AN to 1/8 NPT Steel Adapter Fitting
    90 Degree -3 AN to 1/8 NPT Steel Adapter Fitting
    SKU-6174279
    x
                

    Brake Adaptor.

    • 1/8" NPT

     

  • DOT Braided Stainless Brake Hoses, Mustang II, 7/16-24
    DOT Braided Stainless Brake Hoses, Mustang II, 7/16-24
    SKU-6178565
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • Goodridge 15 Inch Braided Brake Line with 90 Degree End
    Goodridge 15 Inch Braided Brake Line with 90 Degree End
    SKU-91031898
    x
                

    These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    • Stainless steel
    • 90° fitting on one end and a straight fitting on the other
    • Brake lines, clutch lines and gauge lines
    • Available with AN3 or AN4 fittings
    • Sold individually

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Lokar EC-80THT216 Univ. Transmount E-Brake Cables, 216 In, Stainless
    Lokar EC-80THT216 Univ. Transmount E-Brake Cables, 216 In, Stainless
    SKU-491EC80THT216
    x
                Transmount emergency brake cables for use with Lokar's transmount emergency hand brake and includes bracket for mounting cables to hand brake. Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless steel inner cable resists moisture. Design allows rear end backing plate fittings to be removed without removing brake cables. Lokar cables also feature adjustable cable lock and clevis. Kit includes two 8 foot outer housings that u-cut-to-fit and are available in stainless housing or black housing. Application fits 8 and 9 inch Fords, Chevy, Chrysler and Lincoln Versailles drum and disc brakes.
    • Quality One-Piece Aluminum Adjusters
    • Aluminum Ferrule To Eliminate Fraying
    • Extruded Liner For Extended Life Of The Cable
    • Stainless Inner Cable Resists Moisture
    • Allow Rear End Backing Plate Fitting To Be Removed
    • Black Housing
  • 7/16 Inch to AN4 Banjo Fitting
    7/16 Inch to AN4 Banjo Fitting
    SKU-6174063
    x
                7/16 Inch to AN4 Banjo Fitting
            
  • Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    SKU-6176702
    x
                

    We offer these premium-quality weld-in bungs for a variety of uses. They're CNC-machined from steel and are great for oil or fuel tanks, radiators, valve covers, manifolds, and rear axle housings.

    Female weld bung fittings available in steel.  1/4 Inch NPT works well with rubber round pedal pad (part number 91031200) to mount pedal stud. 

    Threaded Steel Weld Bung Fitting

    • 1/4 Inch NPT

    Fitting Thread Application Chart (GIF)

     

  • Lokar BCA-9503 90 Billet Aluminum Direct Fit Brake & Clutch Pedal Arm
    Lokar BCA-9503 90 Billet Aluminum Direct Fit Brake & Clutch Pedal Arm
    SKU-491BCA9503
    x
                
    • Billet Brake And Clutch Arm
  • DOT Braided Stainless Brake Hoses, GM/Ford, 7/16-20
    DOT Braided Stainless Brake Hoses, GM/Ford, 7/16-20
    SKU-6178564
    x
                

    This line kit would be used to connect from "hard" lines on the rear axle to rear disc calipers when changing from drum to disc brakes. DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
    • Used to connect from hard line on rear axle to rear calipers when changing from drum to disc brakes

    Kit includes:

    • (2) 8" stainless steel srake lines w/ 7/16" banjo on one end 
    • (2) 7/16" banjo bolts w/ crush washers
    • (2) 3/8" x 24 IFF apapters to the hard lines
    • (2) frame tabs & clips
  • Airheart Brake 3025-9002 175 x One QC Caliper O-Ring Overhaul Kit
    Airheart Brake 3025-9002 175 x One QC Caliper O-Ring Overhaul Kit
    SKU-10730259002
    x
                

    Repair parts for Airheart disc brake calipers are hard to find! These O-ring overhaul kits will get you back on the track in a hurry. Each kit includes all neccessary parts for a rebuild.

  • Dual Outlet Master Cylinder Stainless Steel Dual Brake Line Kit
    Dual Outlet Master Cylinder Stainless Steel Dual Brake Line Kit
    SKU-91031802
    x
                

    This is a pair of steel or stainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.

    • Features tight 90° bends at the master cylinder end
    • Both ends of both lines are 3/8"-24 inverted flare nuts
    • The longer of the two lines measures app. 12" from the bend to the end
  • Lokar EC-80FUTB T-Bird Emergency Brake Cables, Black Housing
    Lokar EC-80FUTB T-Bird Emergency Brake Cables, Black Housing
    SKU-49108001
    x
                Please view the product's page for more information
            
  • Wilwood 260-13622 Remote Flange Mount Master Cylinder Kit, 1 In Bore
    New
    Wilwood 260-13622 Remote Flange Mount Master Cylinder Kit, 1 In Bore
    SKU-83526013622
    x
                Please view the product's page for more information
            
  • Blue Straight AN4 Flare Adapter to 1/4 Inch Aluminum Pipe Fitting
    Blue Straight AN4 Flare Adapter to 1/4 Inch Aluminum Pipe Fitting
    SKU-6176043
    x
                

    These straight flare adaptors connect 1/4" pipe to straight -4 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -4 AN to 1/4" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Blue anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Wilwood 140-7675 FDL 12.19 Inch Front Brake Hub Kit, 1967-72 GM
    Wilwood 140-7675 FDL 12.19 Inch Front Brake Hub Kit, 1967-72 GM
    SKU-8351407675
    x
                

    Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders.

    12.19" Big Brake Series features:

    • Forged 4-pistonDynalite Calipers - black finish
    • 12.19" diameter Ultralite HP 32 Vane rotors - plain finish
    • Wilwood BP-10SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Minimum wheel diameter of 16"

    All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.

    835-1407675 Instructions (PDF)

     

  • Wilwood 120-13529-RD Forged Dynalite-M Disc Brake Caliper, Red
    New
    Wilwood 120-13529-RD Forged Dynalite-M Disc Brake Caliper, Red
    SKU-83512013529RD
    x
                

    The Forged Billet Dynalite-M is further enhancement of the venerable Forged Dynalite series calipers. Specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Red Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Steel AN3 to AN3 90 Degree Adapter
    Steel AN3 to AN3 90 Degree Adapter
    SKU-6172500
    x
                Steel AN3 to AN3 90 degree adapter.
            
  • Lokar EC-80JAGHT Jag Rear Parking Brake Cables, Stainless Housing
    Lokar EC-80JAGHT Jag Rear Parking Brake Cables, Stainless Housing
    SKU-491EC80JAGHT
    x
                

    Kit is designed for use with Lokar's Floor Mount Emergency Hand Brake, and in conjunction with Lokar's Connector Cables. Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless inner cable resists moisture. Design allows rear end backing plate fittings to be removed without removing brake cables. Lokar cables also feature adjustable cable lock and clevis.

    • Kit is complete with cable bracket and spacers.
    • Kit includes two 8 foot outer housings that "U-Cut-to-Fit" and are available in stainless.
    • Application fits 8" and 9" Ford, Chevy, Chrysler and Lincoln Versailles drum ­­and disc brakes.
    • See chart for additional brake applications.
    • Call for other applications or custom configurations. 
  • Lokar EC-8001HT108 E-Hand Brake Universal Connector Cable, 108 Inch
    Lokar EC-8001HT108 E-Hand Brake Universal Connector Cable, 108 Inch
    SKU-491EC8001HT108
    x
                
    • Quality One-Piece Aluminum Adjusters
    • Aluminum Ferrule To Eliminate Fraying Of Housing
    • Extruded Liner For Extended Life Of The Cable
    • Stainless Inner Cable Resists Moisture
    • Allow Rear End Backing Plate Fitting To Be Removed
    • U-Cut-To-Fit Outer Housings
    • Black Housing
  • Aluminum Tube Nut Sleeve, -10 AN 5/8 Inch
    Aluminum Tube Nut Sleeve, -10 AN 5/8 Inch
    SKU-6176067
    x
                

    These tube nut sleeves, when used in conjunction with our tube nuts (sold seperately), allow you to attach hard lines to AN fittings. You need to flare the tube to 37° to match the AN fitting. Not for use with 45° flared lines.

    Fitting Thread Application Chart (GIF)

  • Lokar BCA-9505 180 Billet Direct Fit Auto Brake Pedal Arm, XL Pad
    Lokar BCA-9505 180 Billet Direct Fit Auto Brake Pedal Arm, XL Pad
    SKU-491BCA9505
    x
                
    • Billet Brake Pedal Arm
  • Lokar BFG-6013 Billet Aluminum XL Series Brake Pedal Pad w/Rubber
    Lokar BFG-6013 Billet Aluminum XL Series Brake Pedal Pad w/Rubber
    SKU-4916013
    x
                Lokar's billet aluminum brake pedal cover is EXTRA LARGE for those  seeking  more substance under foot.  These brake pedal pads mount with  a 1/2 - 20  stud built into the back of the pad. 
    • XL Series Pad Size, measures 3-3/4" wide x 2-3/4" tall
    • Rubber Insert Design Pad
    • Brushed Aluminum Finish

    Brake and Clutch Pedal Pad Installation Instructions (PDF)

  • Lokar EHB-7011 Trans Mount Emergency Hand Brake, 11 Inch
    Lokar EHB-7011 Trans Mount Emergency Hand Brake, 11 Inch
    SKU-4917011
    x
                

    Transmission mount emergency hand brake lever assembly. Ratchet cut gear plate and lock are heat treated for strength and safety. Lever's geometric design allows for comfortable leverage operation. E brake handle mounts to your Lokar shifter.

    Note: 11" Hand brake is suggested to be used with 16" and shorter shifters.  Use 16" hand brake with 23" and taller shifters.

    The tailmount, floor mount and cable operated transmission shifters do not offer the capability of mounting the transmount hand brake assemblies.  For these type of transmission shifters, the floor mounted hand brake assembly should be utilized.

     

  • Wilwood 150-8936K BP-10 GM Metric 1978-Up Brake Pads
    Wilwood 150-8936K BP-10 GM Metric 1978-Up Brake Pads
    SKU-8358936
    x
                

    Speedway Motors is your one-stop shop for GM 1978-Up Midsize caliper brake pads.

    • Medium friction, smooth engagement, low abrasion on iron rotors.
    • Flat torque curve.
    • Low to medium wear rate, increases as temperature increases.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side. 

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 21