Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 45

Products

Brake

Shop T-Bucket Brakes At Speedway Motors

Nobody knows T-Bucket brakes like Speedway Motors! With the most experience in the T-Bucket brakes business, you can be assured that you are getting quality components for the most critical part of your car from top brands like Wilwood and AFCO . Speedway has disc and drum brake kits that are sure to provide the stopping power you need. We also have a huge selection of master cylinders, brake rotors, brake bleeders and brake pedals, plus the brake lines, fittings and proportioning valves you need to complete any brake system rebuild or upgrade.

Featured Products
  • Wilwood 15A-10154K 9225 PolyMatrix A Brake Pad Set, 1.00 Inch Thick
    New
    Wilwood 15A-10154K 9225 PolyMatrix A Brake Pad Set, 1.00 Inch Thick
    (Part #83515A10154K)
    x
                
    • Ultimate high friction pad with aggressive initial response
    • Immediate low tempeature response.
    • Low wear rate
    • Ultimate high friction pad with aggressive initial response
    • Immediate cold response with highest friction values at all temperatures.
    • Severe duty use on oval tracks, road courses, and other applications that require immediate high torque response.
    • Long wear rate for sustained high heat braking.
    • Compatible with all iron and steel rotors.

    Compound Data Sheet (PDF)

  • Wilwood 15B-3993K 7520 PolyMatrix B Brake Pad Set, GN III, .80 In
    New
    Wilwood 15B-3993K 7520 PolyMatrix B Brake Pad Set, GN III, .80 In
    (Part #83515B3993K)
    x
                
    • Medium-high friction, good cold response
    • Gently rising torque curve, predictable engagemnet
    • Low wear rate at medium temperatures, increasing to moderate at high temperature.
    • Medium-high friction, good cold response
    • Traditional favorite for asphalt LM's, modifieds, and sprints.
    • Modifieds, late models, and other hard braking dirt applications.
    • Intermediate weight road course, auto-cross, rally.
    • Beds easily and fully compatible with all iron and steel.

    Compound Data Sheet (PDF)

  • Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    (Part #91031831)
    x
                

    Brass adapter.

    Straight 3/8"-24 IFF to 1/8" NPT Male Adapter

  • Weld-On 1978-88 GM Flat Mount Caliper Bracket
    Weld-On 1978-88 GM Flat Mount Caliper Bracket
    (Part #91641009)
    x
                

    These caliper brackets mount flat and must be welded onto your 3" diameter axle tube. Designed to mount a 1978-1988 GM metric car front caliper for use with an 11.75" diameter rotor. Brackets are 1/4" thick.

    IMCA APPROVED

  • 12 x 2 Brake Drum for Bendix Style 1937-48 Ford Brakes
    12 x 2 Brake Drum for Bendix Style 1937-48 Ford Brakes
    (Part #91065400)
    x
                We offer these new iron 12" x 2" brake drums with a 5 on 5-1/2" bolt circle, which are impossible to find elsewhere. Use this brake drum with our Bendix Style self-energizing 12" x 1-3/4" or 12" x 2" backing plate assemblies for 1937-1948 Ford.
            
  • Lokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finish
    Lokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finish
    (Part #4917000)
    x
                

    This Lokar Floor Mount Emergency Hand Brake features a chrome plated steel e brake handle and is designed after the automotive industry standards. The ratchet cut gear plate and lock are heat treated for strength and safety. Special feature includes 4-point mounting capabilities for floor mount or side mounting for custom applications.

    Comes complete with clevis for installation with Lokar Emergency Brake Cables, Lokar # EC-80FU, Speedway Motors # 491-80FU suggested below. Cables are sold separately.

    Lokar Install Tip:  Every think about mounting the floor mount hand brake sideways in front of your seat?  You can!

  • Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    (Part #6176702)
    x
                

    We offer these premium-quality weld-in bungs for a variety of uses. They're CNC-machined from steel and are great for oil or fuel tanks, radiators, valve covers, manifolds, and rear axle housings.

    Female weld bung fittings available in steel.  1/4 Inch NPT works well with rubber round pedal pad (part number 91031200) to mount pedal stud. 

    Threaded Steel Weld Bung Fitting

    • 1/4 Inch NPT

    Fitting Thread Application Chart (GIF)

     

  • 3/16 Inch Steel Brake Line
    From: $1.99
    Product Rating: 4.67 Stars
    3/16 Inch Steel Brake Line
    (Part #91031800)
    x
                If you choose to use inverted flare hardware on your car, Speedway can save you time, effort, and money. 

    These 3/16" mild steel "hard" lines bend easily and smoothly with hand tools, already have a double flare on each end, have male fittings threaded 3/8"-24 installed and have a 45° inverted flare.

    Double wall, copper plated steel brake line. High burst strength. Resistant to vibration and fatigue. 3/16" O.D. tubing. Each end flared with 3/8"-24 fitting. Seven different precut lengths available.

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings

Filter

"T-Bucket, Brake" Page 1 of 45

Page 1 of 45

  • Wilwood 140-7140-DP FDL Rear Brake Kit, New Big Ford 2.50 Off
    New
    Wilwood 140-7140-DP FDL Rear Brake Kit, New Big Ford 2.50 Off
    (Part #8351407140DP)
    x
                This group of FDL Pro-Series rear disc kits provides a complete solution for popular muscle car rear axles that require a parking brake. Forged billet Dynalite four piston calipers, 12.19"  one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application.

    Installation Instructions (PDF)

  • Lokar BAG-6005 Billet Aluminum Brake Pad w/Rubber, Brushed
    Lokar BAG-6005 Billet Aluminum Brake Pad w/Rubber, Brushed
    (Part #491BAG6005)
    x
                
    • Made to cover the factory brake pad. Billet aluminum construction with hardware included. Made in the U.S.A. Lifetime warranty.
    • Designed w/1/2 X 20 Thread
    • Incl. 1/2 X 20 Stud In Kit
    • Can Be Mounted Centered Or Off Center
    • Rubber Insert Designed Pad
    • Made In The U.S.A.
    • Lifetime Warranty
  • Wilwood 160-8747 GT 48 Curved Vane Spec 37 Iron Rotor, 12.6 Inch
    New
    Wilwood 160-8747 GT 48 Curved Vane Spec 37 Iron Rotor, 12.6 Inch
    (Part #8351608747)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for moderate temperature racing to street use.
  • Mild Steel -3 AN Brake Line Kit
    Mild Steel -3 AN Brake Line Kit
    (Part #6178560)
    x
                

    This brake line kit bridges the gap between our stainless steel -3 AN kit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3 AN fittings to plumb your brake lines. 

    Since we don't know what calipers and master cylinder you will be using, these fittings are sold separately.

     
    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings
  • Wilwood 160-12292 GT 36 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
    New
    Wilwood 160-12292 GT 36 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
    (Part #83516012292)
    x
                Wilwood's GT 36 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest braking available.
    • Spec-37 Heavy wall Castings
    • Suitable for high temperature racing to street use.
  • Wilwood 120-8000-RSP BNSL6R Caliper,RH, 1.62/1.12/1.12 Pist, 1.25 Disc
    New
    Wilwood 120-8000-RSP BNSL6R Caliper,RH, 1.62/1.12/1.12 Pist, 1.25 Disc
    (Part #8351208000RSP)
    x
                The billet SL6R series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. These calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power in extreme environments over a broad range of vehicle applications. The key to the superior performance of the SL6R comes from the extremely durable and efficient body design. Starting at 4.84 pounds it is the product of computer generated solid modeling and FEA stress analysis technology. Full length stiffening ribs and a reinforced radial transition from the piston bore housings to the closed end bridges has produced the strongest SL caliper bodies ever built. When compared to open bridge calipers that use tube or stand spacers between the body halves, the closed end bridge design is measurably stronger with less separation or deflection under load. Additional strength and resistance to deflection comes from the four high-strength steel end bridge bolts. A fifth center bridge bolt provides even more overall strength and easy access to the pads without the need to remove the caliper from the mount.    A unique six-piston differential bore configuration provides balanced loading for even pad wear in sustained high heat environments. The standard SL6R calipers feature one-piece stainless steel pistons. Stainless is used for its slow he
            
  • Aluminum Tube Nut Coupler, AN4 1/4 Inch
    Aluminum Tube Nut Coupler, AN4 1/4 Inch
    (Part #6176056)
    x
                

    Use these tube nut couplers in conjunction with our tube sleeves (sold seperately) to seal bulkhead fittings to fuel cells, oil tanks and other applications using hard line fitting situations. You need to flare the tube to 37° to match the AN fittings. Not for use with 45° flared lines.

    Fitting Thread Application Chart (GIF)

  • Wilwood 160-11837-B GT 48 Curved Vane Spec 37 Iron Rotor, 11.75 Inch
    New
    Wilwood 160-11837-B GT 48 Curved Vane Spec 37 Iron Rotor, 11.75 Inch
    (Part #83516011837B)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for high temperature racing to street use.
  • Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    (Part #83512013529BK)
    x
                

    The Forged Billet Dynalite-M is specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Black Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Wilwood 160-2979 GT 48 Curved Vane Spec 37 Iron Rotor, 12.72 Inch
    New
    Wilwood 160-2979 GT 48 Curved Vane Spec 37 Iron Rotor, 12.72 Inch
    (Part #8351602979)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for moderate temperature racing to street use.
  • Replacement Carbon Steel Brake Rotors
    Replacement Carbon Steel Brake Rotors
    (Part #715DB206)
    x
                For use on our spindle mount wire wheels. Bolts to back side of spindle mont wheels. Rotors are made from 3/16" carbon steel, and are 10" in diameter. These rotors are ground for flatness and have been clear zinc plated.
            
  • Wilwood 160-7100 SRP 30 Vane Iron Rotor, 11 Inch
    New
    Wilwood 160-7100 SRP 30 Vane Iron Rotor, 11 Inch
    (Part #8351607100)
    x
                SRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the holes and slots will reduce pad glaze and disperse gasses and heat generated during the pad to rotor interface. The holes and slots also inhibit irregular pad compound build-up on the rotor faces resulting in smoother engagement and improved pedal response in all conditions. The material removed also contributes to lower rotating and unsprung suspension weight.
    • Premium grade, medium weight castings.
    • Suitable for moderate temperature racing to street use.
    • For ultimate durability in racing use comparable ULHP or GT rotors.
  • Stainless Steel Brake Line, 3/16 Inch
    Stainless Steel Brake Line, 3/16 Inch
    (Part #6178510)
    x
                

    Our 3/16" stainless steel tubing is made from 304 grade (rated at 6000 psi) which is double annealed to allow easy flaring.

    NOTE: This line is intended to be used in conjunction with 37 degree AN # 3 style fittings which make use of a single flare. Stainless steel line will not work with 45 degree double flare 3/8"-24 flare nuts. We strongly suggest that the 37 degree single flare (flaring tool # 910-89524) be used when flaring this line for the AN # 3 tube nuts and sleeves.

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

    Brake System Builder Tip (GIF)

  • Wilwood 160-11839-B GT 48 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
    New
    Wilwood 160-11839-B GT 48 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
    (Part #83516011839B)
    x
                Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
    • Spec-37 Heavy wall Castings
    • Suitable for high temperature racing to street use.
  • Lokar X70-BHR Midnight Series Black Billet Hand Brake Boot Ring
    Lokar X70-BHR Midnight Series Black Billet Hand Brake Boot Ring
    (Part #491X70BHR)
    x
                Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, OR billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings also available in black anodized.
    • Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
    • It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
    • The Hand Brake Boots are available in transmount or floor mount styles.
    • All boots hug the shifter lever and there are no unsightly pull ties or laces.
  • Wilwood 15A-5740K 9725 PolyMatrix A Brake Pad Set, .98 Inch Thick
    New
    Wilwood 15A-5740K 9725 PolyMatrix A Brake Pad Set, .98 Inch Thick
    (Part #83515A5740K)
    x
                
    • Ultimate high friction pad with aggressive initial response
    • Immediate low tempeature response.
    • Low wear rate
    • Ultimate high friction pad with aggressive initial response
    • Immediate cold response with highest friction values at all temperatures.
    • Severe duty use on oval tracks, road courses, and other applications that require immediate high torque response.
    • Long wear rate for sustained high heat braking.
    • Compatible with all iron and steel rotors.

    Compound Data Sheet (PDF)

  • Stainless Steel Drilled Brake Rotor for Spindle Mount Wheel
    Stainless Steel Drilled Brake Rotor for Spindle Mount Wheel
    (Part #715DB206SS)
    x
                

    For extra stopping power and good looks. Bolts to the back side of spindle mount wheels. Brake rotors are shown here polished.

    • 10" O.D.
    • 3/16" thick
    • The center hole diameter is 2.691"
    • The bolt pattern contains four 5/16" holes on a 3.375" circle
  • Lokar 70-BHBT Billet Hand Brake Boot Ring with Transmount Boot
    Lokar 70-BHBT Billet Hand Brake Boot Ring with Transmount Boot
    (Part #49170BHBT)
    x
                
    • Lokar shifter boots are black Naugahyde and all sets include a boot, polished stainless base ring, or billet aluminum ring with ball-milled edge and stainless screws. Available in transmount style or floor mount style. Boot hugs the hand brake lever.
    • Black Naugahyde
    • Boot Hugs The Hand Brake Lever
    • Made In The U.S.A.
    • Lifetime Warranty
  • Lokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finish
    Lokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finish
    (Part #4917000)
    x
                

    This Lokar Floor Mount Emergency Hand Brake features a chrome plated steel e brake handle and is designed after the automotive industry standards. The ratchet cut gear plate and lock are heat treated for strength and safety. Special feature includes 4-point mounting capabilities for floor mount or side mounting for custom applications.

    Comes complete with clevis for installation with Lokar Emergency Brake Cables, Lokar # EC-80FU, Speedway Motors # 491-80FU suggested below. Cables are sold separately.

    Lokar Install Tip:  Every think about mounting the floor mount hand brake sideways in front of your seat?  You can!

  • Wilwood 160-7106-BK SRP-BLK 32 Vane Iron Rotor, 12.19 Inch
    New
    Wilwood 160-7106-BK SRP-BLK 32 Vane Iron Rotor, 12.19 Inch
    (Part #8351607106BK)
    x
                SRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the holes and slots will reduce pad glaze and disperse gasses and heat generated during the pad to rotor interface. The holes and slots also inhibit irregular pad compound build-up on the rotor faces resulting in smoother engagement and improved pedal response in all conditions. The material removed also contributes to lower rotating and unsprung suspension weight.
    • Premium grade, medium weight castings.
    • Suitable for moderate temperature racing to street use.
    • For ultimate durability in racing use comparable ULHP or GT rotors.
Goto Previous PagePrevious Page
1 2 3 4 5 ... 45