Speedway Motors is the T-Bucket source for body parts, gauges, and interior accessories! Find all the essential fiberglass body components, gauge sets by Stewart Warner and Auto Meter, and vintage gas caps, in our online catalog. While you are there, check out our full line of script emblems, rear view mirrors, windshields, fiberglass hoods and grilles. Don't forget about Speedway's vintage bucket seats and bomber seats for your traditional T-Bucket, too!
$6.99More InfoBullet Shape License Plate Fasteners(Part #91004020)x
These bullet-shaped fasteners are chrome plated brass; over 1" long and 3/8" diameter at base. Washers, nut and 1 /4 " stud are bright plated to resist corrosion.
$24.99More InfoNewUniversal Adjustable Frame Rail Bracket(Part #91007211)x
This slick little universal adjustable frame rail bracket fits inside your un-boxed frame rail to mount just about anything you can think of. It works especially well for a steering shaft support heim and has a specially sized and angled slot just for that purpose. It's also no coincidence that the pre-drilled bolt holes also line up with most popular electric fuel pumps and fuel filter brackets.
- Plain mild steel
- Includes all necessary hardware for bracket installation
- Support heim not included
$119.99More InfoUniversal Long Fiberglass Floor Mount Console(Part #9001430)x
With these do-it-yourself interior components there's no limit to the creative uses you'll find! These fiberglass floor consoles allow you to customize your street rod's interior to suit your style.
- Fiberglass construction
- Long design floor mount console
- Can be painted, carpeted or upholstered
- 33.25" long x 8.5" wide x 6" tall
- Black gel coat
- Trim this flat bottomed console to custom fit your application
$16.99More InfoStandard Bear Jaw Door Latch(Part #91052860)x
Excellent modern replacement latch for all passenger car bodies. Modification to door is required to install latches. Choose left hand or right hand.
$167.99$197.99More InfoMSD 89631 Programmable Shift Light(Part #54789631)x
The most universal and easy to use shift light available! Our new compact Digital Shift Light can be installed on everything from 1-cylinder points-triggered engines to Modular Ford engines with coil-on-plug technology.The tiny digital controller inside the compact housing gives you the ability to program the rpm activation points through the easy-to-view LED panel and two programming buttons. When the engine reaches the activation rpm, the six red LEDs illuminate brightly to alert your senses into throwing the shifter at the exact rpm. The DSL can be installed on single cylinder engines up through 12-cylinders on stock ignitions or high-powered aftermarket systems.
- Installs with distributors, coil packs or coil-on-plug systems ranging from single to 12-cylinders
- Programmable from 100 - 15,900 rpm down to 10 rpm increments
- Six bright LEDs are easy to view in daylight and can be dimmed at night
- Supplied with an easy to install GMR pickup!
$8.99More InfoFender Welting(Part #75134601)x
Fender welting is a necessity for mounting fenders and body panels. Ours is made from black, crush grain vinyl and has a 3/16" diameter bead with a 1" flange. Comes in a 25 foot roll.
$159.99More InfoLizardSkin 50100 Ceramic Thermal & Sound Insulation, 2 Gallon(Part #91044050)x
LizardSkin is a revolutionary product that can lower the interior temperature of a vehicle from 25 to 30 degrees. With only a .040" thick application, LizardSkin can also lower the interior noise level by 10 - 12 decibels by forming a 100% sealed seamless membrane over 100% of the car's interior. LizardSkin can also be used on the exterior of a vehicle and when used in wheel wells it reduces the chance of starring from thrown rocks. Since it is impervious to moisture after drying, it helps to seal the surface to which it is applied.
Sold in two-gallon buckets. Each covers 45-50 sq. ft. at 0.040" thickness dry. Add their Sound Control, also a spray-on, water-based product, and dramatically reduce interior noise even more.
- Class A fire-rated
- Environmentally friendly solution
- Provides non-combustible thermal insulation
- Eliminates cut and paste waste
- Able to withstand temperatures up to 500°F
- Adheres to most any material
- Continuous protective moisture barrier
- One-part coating system
- Lightweight (around 0.1 lbs/ft2)
- No respirator needed; but dust mask/protective eyewear is recommended
- Easy spray-on application
- Can be easily applied to irregular surfaces and geometries
- Offers a protective, seamless membrane
- Fast clean up with soap and water
Spec Sheet (PDF)
$29.99More InfoAluminized Heat and Noise Insulation Shield, Double Sided(Part #91080249)x
Aluminized heat shield is constructed of two layers of 99.5% pure grade industrial aluminum, laminated to 3/8" fiber tech padding to achieve highest reflection of radiant heat and sound deadening.
- Insulates against heat, noise and cold
- Mold and mildew proof
- Fire retardent
- Reflects 97% of infrared energy
- Fiberglass reinforced
- Double-sided aluminum backing
- 4' x 6' sheet
"T-Bucket, Body" Page 1 of 44
Page 1 of 44
EMPI 62-2310 High Back Bucket Seat Cover, Black w/Square Pattern, Each(Part #1412310)x
Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly High Back bucket seat (141-2300). EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.
- Thick padded high grade vinyl construction
- Designed for use with EMPI's Poly High Back seat (141-2300)
- Black with square pattern
- Snap fasteners
- Dual harness slots
$29.99More InfoSpeedway Fuel Level Gauge with Sender, 2-1/16 Inch(Part #91065042)x
These fuel level gauge/sender kits feature a domed lens and a stainless steel bezel and a backlit white face. The fuel sender comes with seal and and all mounting hardware.
- Overall Diameter: 2.25"
- Overall Length: 9.25"
- Includes sender
- 240 ohms empty, 33 ohms full
- Stainless steel bezel
- Backlit white face
- Replacement light socket assembly available # 910-65071
Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.
$59.99$73.99More InfoAuto Meter 201009 Cobra Voltmeter Gauge, Short Sweep Electric, 2 Inch(Part #182201009)x
This vintage instrument series is designed to accurately re-create the period correct details of the instruments used in the original Cobra Roadster while incorporating the latest technology advancements in performance gauges from Auto Meter. These black dial face instruments feature incandescent through the dial backlighting with white pointers, traditional numbers and tick marks, and are finished with flat glass and scalloped chrome bezels.
- Short Sweep Electric Voltmeter
- 8-18 V
- Mounts in 2-1/16" Hole
- Includes mounting hardware and Incandescent Backlighting
- Requires 18 gauge electrical wire and ring or spade terminal connections for installation (not included)
$59.99More Info1928-31 Model A Front Crossmember(Part #91657011)x
These replacement 1928-31 Model 'A' Ford front crossmembers lower a Model A chassis 2" below a stock crossmember. Replaces a cracked original or use it to start your reproduction frame off right. Made of heavy, 7-gauge steel with clearance for 1-3/4" cross spring. Welds to frame boxing plates of original or repro chassis.
$739.99$799.99More InfoClassic Instruments Speedometer Gauge Set, V8 Speedster Face(Part #2751018)x
Tom Gale, formerly Chief Designer of the Daimler Chrysler Corporation, has led the Classic Instruments design team in the production of a beautiful new series. Designed with unique dial faces that are spun and engine turned aluminum. The pointers for this series is a new design and each pointer is chrome painted. The face has a chrome V8 emblem signifying American Hot Rod Heritage. The light diffusers have laser etched indices lining up with the indices on the gauge faces.
The V8 Red Steelie series features a vivid red background with spun aluminum numbers and accent graphics that brightly bounce off the red background. The series also features the uniquely designed pointer for the V8 line which is chrome plated and balanced for precision accuracy. Additional details within the instruments are laser etched markings on the light diffuser ring which add a level of dimension and functionality. The etching corresponds with the indices on the face and flow into a polished stainless high step bezel that is crimped around a optic grade curved lens to complete the overall design.
- Black "V8 Speedster" face design or Red "V8 Red Steelie" face design
- Kit includes 3-3/8" Speedo & Tach, 2-1/8" Fuel, Oil, Temp, Volts
- Standard GM sender pack included
$3.99More InfoUniversal Expanding Body Mounts(Part #715BM401)x
If you are building a lightweight car like a "T" or an "A", mounting the body may present a problem. These neat expanding rubber universal body mounts allow you to drill a 3/4" hole in the top of the frame, insert a 3/8" coarse bolt, tighten, then the body is mounted.
Not recommended for cars newer than 1934.
$129.99More InfoSprint Style Track T Fiberglass Nose(Part #9002093)x
Nose piece measures 24" high, 23-1/2" wide and 23-1/2" deep. Fiberglass construction. Use with Sprint Style cast aluminum grille.
This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.
$39.99More InfoEMPI 62-2408 Poly Low Back Bucket Seat Cover, Black w/Square Pattern(Part #1412408)x
Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly Low Back bucket seat (141-2400). EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.
- Thick padded high grade vinyl construction
- Designed for use with EMPI's Poly Low Back seat (141-2400)
- Black with square pattern
- Snap fasteners
- Dual harness slots
$48.99$65.88More InfoDEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet(Part #35610393)x
Reflect-A-GOLD is a metalized polyamide polymer laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and remove.
Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms – anything or area that needs protection from heat.
- For firewalls, bulkheads, engine covers, floors, seat bottoms & more
- Capable of handling continual temperatures up to 850°F
- Resists UV degradation for long-term performance
- Virtually NO clearance needed
- Adhesive protected by a release liner rated up to 325°F
- Light weight and flexible-Trim to size
- Space age polymer material
- Reflects up to 850°F! Reflecting 80% of heat!
- Ultra light weight and self adhesive
$399.99More InfoDeluxe '27 Bare Model T Frame(Part #7154600)x
These are great for the do-it-yourself fabricator and builder. These are the same frames as our frame assemblies, but have no suspension or steering mounts installed. You can build your own or adapt components you acquire separately.
- 1-1/2" x 3" rectangular steel tube rails
- 3" O.D. round tube front crossmember
- Designed for spring-behind front axles
- Front perch accommodates 1-3/4" wide spring
If you wish to add engine/suspension/steering mounts to your frame, simply purchase these items along with your frame.
This product requires a 3-4 week build time.
$199.99More InfoOmega Kustom 20235 8000 RPM Tach, 5 Inch, Tan Face(Part #91120235)x
$199.99More Info1909-12 Ford Model T Brass Glass Setting Channel for Open Cars(Part #55509900)x
Fits Ford Model T Roadster and Touring open top applications. Designed to use 3/16" thick safety glass or Lexan. Channel holds glass in the original frames.
$24.99More InfoStewart Warner 82311 Deluxe Ammeter Gauge, 2-1/16 Inch, 60-0-60 Amps(Part #66582311)x
Stewart Warner Deluxe 2-1⁄16" diameter ammeter gauges feature a black face, white letters and chrome bezel. A 12 volt light is included.
$141.99More InfoClassic Instruments AN80SHC All American Series Nickel Tach(Part #275202)x
Classic Instruments teamed up with Tom Gale, who was Chief Designer at Chrysler, to produce these beautiful gauges. They feature curved glass, polished stainless bezel, a raised logo and the vintage appearance you are looking for. The tach is 3-3/8".
$9.99More InfoRubber GM Transmission Cushion(Part #91018016)x
OEM-style rubber transmission cushion for many '58-'82 GM transmissions including TH350 auto, Muncie, Saginaw, and others.
- Meets or exceeds OEM specifications
- Rubber formulation provides abrasion resistance and aging stability
- Tough, hardened steel plate & inserts
- Chemlock® bonding agent ensures superior rubber-to-metal bond
$2.49$4.00More InfoReplacement Dash Light Bulb for 2-1/16 Inch Gauges(Part #91065072)x
Swap your burned out, broken, or faulty gauge bulbs in 2-1/16" size gauges with these replacement light bulbs. They are a 3 watt bulb with in-line straight securing pins for use in most gauges and select speedometers and tachs.
- Replacement dash/gauge bulbs
- Fits 2-1/16" O.D. gauges
- 12 volt
- 3 watt bulb
- Sold each
$379.99More Info1923-25 Model T Windshield Frame, Chrome(Part #55523002)x
Mr. Roadster '23-'25 Model T steel windshield frames are reproductions using the stock dimensions: bottom 38-1/2 " wide, 10-1/8" tall, top 37" wide, 10-1/4" tall. Includes slugs and glass caps. Channel kit is sold separately. No glass or windshield rubber is included with our windshield frames.
Builder's Tip: Speedway '23-'25 T bodies use a 39-5/8" wide windshield frame when using short posts. If using 3/16" glass or lexan, use with brass setting channel. If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.
From: $3,299.99More InfoBasic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor(Part #7152021)x
It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!
Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.
All of our T kits are also available with chrome suspension. This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.
Chassis Exploded View (Link)
This item requires a 3-4 week build time.
$119.99$157.95More InfoLokar IDP-2005 Polished Billet Arm Rest Door Pulls, Pair(Part #491IDP2005)x
Two screw installation, Stainless Screws included
- Deep pocket - 4 finger width
- Designed to recess in arm rest
- Mounting bracket included
- Sold in pairs
- Complements Lokar Door Handles, Pedals and Dash Inserts
$2,499.99More Info1923 T Deluxe Roadster Body with 20 Inch Pickup Bed, Unchanneled Floor(Part #7152552)x
Functional right hand door (hinged and latched), door sill, flat dashboard, recessed area for upholstery tack strip, molded firewall and lower body mounting flange.
This product is made to order. Please allow two to four weeks for lead time. Ships truck freight.
Truck Freight Shipping Charges Apply - click here for details