Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors is the T-Bucket source for body parts, gauges, and interior accessories! Find all the essential fiberglass body components, gauge sets by Stewart Warner and Auto Meter, and vintage gas caps, in our online catalog. While you are there, check out our full line of script emblems, rear view mirrors, windshields, fiberglass hoods and grilles. Don't forget about Speedway's vintage bucket seats and bomber seats for your traditional T-Bucket, too!

Featured Products
Lift Latch Lap Belt
$24.99
Product Rating: 4.63 Stars
Lift Latch Lap Belt
x
            Seat belts in six popular colors. Chrome lift latch with  standard belt.  Red, black, maroon, gray, dark blue, or tan.   Lap belts adjustable from 60" to 74". DOT approved. 

Includes 1.5" long mounting bolts and hardware. These are 1-13/16" wide.
Speedway Lightened Aluminum Hot Rod Bomber Seat
Speedway Lightened Aluminum Hot Rod Bomber Seat
x
            

Everybody loves our Bomber seats, but some wanted them with lightening holes. Just like the original, this one is hand made from .090" aluminum with a hand-formed bead. Measures 16" wide and 21" tall. Needs no upholstery. Weighs only 5.76 lbs!

Mounting brackets sold separately.

Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor
Deluxe 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor
x
            The all new Deluxe T frame is engineered to deliver the ultimate ride and  handling of any T-bucket chassis! An exclusive triangulated four-bar rear  suspension with coilover shocks and urethane bushings provides unparalleled  adjustability and traction control, plus better ride quality than any other  T-bucket chassis on the market. It's paired with urethane-bushed four-bars  supporting the spring-behind-axle front suspension. The Deluxe '23 T sets a new  standard for the next generation of T-buckets! 

Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

Chassis Exploded View (Link)

This product requires a 3-4 week build time.

Hagan M-ARM-N Fattie Noodle Rear-View Mirror Arms, Pair
New
Hagan M-ARM-N Fattie Noodle Rear-View Mirror Arms, Pair
x
            

Finish off your custom street rod right with these exterior rear-view mirror arms from Hagan Street Rods.  They bolt to your vehicle with two 10-24 screws and each arm raises the mirror up 4" and out from body 4".  Comes in a show polished finish.

  • Arms are 5-1/2" 
  • Mount base is 1" x 1/2"
  • Mount holes are 5/8" apart
  • Comes with rubber gasket
  • Sold in pairs

"T-Bucket, Body" Page 1 of 23

  • 1928-31 Model A Front Crossmember
    1928-31 Model A Front Crossmember
    x
                

    These replacement 1928-31 Model 'A' Ford front crossmembers lower a Model A chassis 2" below a stock crossmember. Replaces a cracked original or use it to start your reproduction frame off right. Made of heavy, 7-gauge steel with clearance for 1-3/4" cross spring. Welds to frame boxing plates of original or repro chassis.

  • Universal Expanding Body Mounts
    Universal Expanding Body Mounts
    x
                

    If you are building a lightweight car like a "T" or an "A", mounting the body may present a problem. These neat expanding rubber universal body mounts allow you to drill a 3/4" hole in the top of the frame, insert a 3/8" coarse bolt, tighten, then the body is mounted.

    Not recommended for cars newer than 1934.

  • 1909-12 Ford Model T Brass Glass Setting Channel for Open Cars
    1909-12 Ford Model T Brass Glass Setting Channel for Open Cars
    x
                Fits Ford Model T Roadster and Touring open top applications. Designed to use 3/16" thick safety glass or Lexan. Channel holds glass in the original frames.
            
  • Rubber GM Transmission Cushion
    Rubber GM Transmission Cushion
    x
                

    OEM-style rubber transmission cushion for many '58-'82 GM transmissions including TH350 auto, Muncie, Saginaw, and others.

    • Meets or exceeds OEM specifications 
    • Rubber formulation provides abrasion resistance and aging stability
    • Tough, hardened steel plate & inserts
    • Chemlock® bonding agent ensures superior rubber-to-metal bond
  • Fiberglass T Transmission Tunnel
    Fiberglass T Transmission Tunnel
    x
                This is the trans tunnel we use in our T-Bucket kits. It measures 22-1/2" long, 19-1/2" wide at the front, 8" wide at the back, and 8" tall at the front. It has a 1" wide mounting flange around the perimeter.
            
  • No Club Lone Wolf Car Club Plaque
    No Club Lone Wolf Car Club Plaque
    x
                Complete the nostalgic look to your rod with this "Lone Wolf" plaque. Constructed of cast aluminum alloy that will not rust. Recessed background is finished in gloss black. No holes for mounting or hanging
            
  • Model T Glass Cap, Stainless Steel
    Model T Glass Cap, Stainless Steel
    x
                

    Stock style glass caps fit all Model T windshields.

    Sold each.

    Model T Glass Cap Illustration (GIF)

  • Speedway 5 Gauge Set
    $159.99
    Speedway 5 Gauge Set
    x
                
    • Stainless steel bezel
    • Backlit white face
    • Includes:
      • 3-3/8” Mechanical Speedometer       
      • 2-1/16” gauges
    • Mechanical oil pressure gauge and line kit
    • Voltmeter
    • Mechanical water temp gauge
    • Fuel gauge and sender
  • Lexan Wind Wings
    From: $29.99
    Product Rating: 4.50 Stars
    Lexan Wind Wings
    x
                  16" x 6". Choose from two colors of wind wing, smoke or clear. Wing wings sold in pairs.       
            
  • Extension For Peep Mirror
    $19.99
    Product Rating: 3.67 Stars
    Extension For Peep Mirror
    x
                

    You want peep mirrors, but they are too short? With this 1-1/2" longer extension, that problem has gone away. Chrome plated to match the peep mirror and machined to fit at both ends. 

    Mirror not included.

  • Standard 1923 T Roadster Body
    $469.99
    Standard 1923 T Roadster Body
    x
                

    Speedway's rugged one-piece body has a flat molded-in dash and a flat, smooth firewall. Also has body lip around the top edge to attach upholstery.

    • Total Length:  52"
    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"
    • The body weighs approximately 41 pounds

    This product is made to order. Please allow two to three weeks for lead time.

    Truck Freight Shipping Charges Apply - click here for details

  • Threaded Windshield Stud, 1928-36 Ford, 3/8 Inch X 3/8 Inch NF X 2 Inch
    Threaded Windshield Stud, 1928-36 Ford, 3/8 Inch X 3/8 Inch NF X 2 Inch
    x
                

    These threaded windshield studs feature a stop and include one stud and one cone nut. They are zinc plated for longevity. Fits 1928-31 Model A and 1932-36 Ford.

    • Steel material
    • (1) stud, (1) cone nut
    • Sold each

    Not included in our windshield kits.

  • T-Bucket Interior Kit For 1923 Deluxe Body W/ Door, Channeled
    T-Bucket Interior Kit For 1923 Deluxe Body W/ Door, Channeled
    x
                

    Completing that last important step in building your Speedway T-Bucket just got easier. This interior kit is designed for proper fit and easy installation, eliminating an expensive trip to the upholstery shop. Kit includes stiched side panels, ergonomic seat bottom cushion and riser, seat back cushion, plus fully sewn floor and firewall carpeting.

    Select from black or dark brown vinyl upholstery.

    Installation Instructions (PDF)

  • Stewart Warner 82310 Deluxe Ammeter Gauge, 2-1/16 Inch, 30-0-30 Amps
    Stewart Warner 82310 Deluxe Ammeter Gauge, 2-1/16 Inch, 30-0-30 Amps
    x
                Stewart Warner Deluxe 2-1⁄16" diameter ammeter gauges feature a black face, white letters and chrome bezel. A 12 volt light is included.
            
  • T Pick-Up Bed Cover
    $149.99
    Product Rating: 4.00 Stars
    T Pick-Up Bed Cover
    x
                

    Speedway Fiberglass bed cover for 20" T Pick-Up bed 900-2020. 

    This cover measures 44-1/2" X 17-1/2".  Both measurements are on center.

     

  • 4 Inch Peep Mirror
    $14.99
    Product Rating: 4.11 Stars
    4 Inch Peep Mirror
    x
                Our 4" diameter peep mirror clamps to the top edge of the door. Fits over a door edge that is app. 1/8" thick or thinner. Fits right or left side (reversible). A popular and universal mirror at a low cost. Sold each.
            
  • Ididit 2503000040 Universal Billet Aluminum Knob, 3/16 Inch Bore
    Ididit 2503000040 Universal Billet Aluminum Knob, 3/16 Inch Bore
    x
                

    Universal billet aluminum switch knobs work great as a headlight switch knob, dash knob, door knobs, lock knob, wiper knob, or a radio knob. These 3/16" versions are retained with a set screw.

  • Flatheads Forever Tag Topper
    $19.99
    Product Rating: 4.00 Stars
    Flatheads Forever Tag Topper
    x
                      Complete the nostalgic look to your rod with this trick license frame accent.       
            
  • Speedway Aluminum Hot Rod Bomber Seat
    From: $174.99
    Product Rating: 5.00 Stars
    Speedway Aluminum Hot Rod Bomber Seat
    x
                Hand formed from .090" aluminum, this aircraft bomber style seat has a 20 degree lay-back design for increased comfort. Seat measures 16" wide and 21" tall. Measures 4-1/8" from the top of the side rail to the bottom of the seat.

    Note: Seat mounting brackets are sold separately. They allow for approximately 6" of adjustment. No mounting holes have been drilled due to the unlimited number of possible combinations.

  • Rear View Mirror Glue
    $3.99
    Rear View Mirror Glue
    x
                

    Glue for your interior rear view mirror.

  • Rear End Fluid Level Checker
    $29.99
    Rear End Fluid Level Checker
    x
                

    Screws into fill hole. For better installation, drill hole below fill hole. Ideal for big quick change rear cover, 1/8" NPT.

    You will have to drill and tap rear cover 92547004 to use this level checker. 

  • Body Savers, .433 Inch Hole, 10/Bag
    Body Savers, .433 Inch Hole, 10/Bag
    x
                
    • Extend the life of your fiberglass body parts by eliminating ovaling
    • Mount using 1/8" rivets
    • 430 Stainless steel 
    • .433" diameter
    • Pack of 10
  • Budget Hinges, Steel
    $49.99
    Product Rating: 4.75 Stars
    Budget Hinges, Steel
    x
                

    Our bare finish, cast steel 1-5/8" by 3-3/4" two tongue design hinges include nylon washers. Sold in pairs (enough to do one door). Ideally suited for Model T, or lighter-weight door applications.

    Designed to be altered and drilled for various applications.

  • Replacement Lap Seat Belts
    $14.99
    Product Rating: 4.50 Stars
    Replacement Lap Seat Belts
    x
                Before you floor it...BUCKLE UP! These replacement seat belts will allow you to upgrade your car to a modern lap seat belt. Handy push button buckle is attached to 1-7/8" wide belt. This seatbelt allows the mounting tabs to be installed at different distances from the buckle and still allows the buckle to be positioned at a place (over the wearers' midsection) of the installers' choosing. 74" long to fit most applications. Black.

    Meets DOT and federal standards.

    910-72050 Instructions (PDF)

  • Clip-In Conversion Kit
    $19.99
    Product Rating: 4.00 Stars
    Clip-In Conversion Kit
    x
                

    Convert your harness from bolt-in to clip-in with this kit. All heavy duty hardware and snap hook. Two bolts, two washers, two clips.

    • Shank diameter is .434 or 7/16 X 20 threads per inch
    • Shank thread length is approximately 1 5/8"
    • Overall length including the eye is 3 1/8"
    • Washer diameter is 2 1/2" with 7/16" hole
    • Fits 2 inch wide belts

     

  • Speedway Universal 20 Circuit Wiring Harness
    Speedway Universal 20 Circuit Wiring Harness
    x
                Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

    Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

    • Harness has 20 circuits, of which 18 are fused
    • Taillight leads measure 17' long
    • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

    Wiring Harness Installation Instructions (PDF)

  • 1926-27 T Lower Rear Roll Pan
    $149.99
    Product Rating: 5.00 Stars
    1926-27 T Lower Rear Roll Pan
    x
                

    This lower rear roll pan mounts to the rear bottom side of the turtle deck portion of our '26-'27 T body. It rounds out the rough lower rear edge and gives a finished rear look. Easily molded onto the lower rear portion of the body to hide frame and rear suspension. Fits Speedway 1926-1927 fiberglass body only (modification required for other bodies).

    • 19" front-to-back
    • Adds approx. 2-1/2" depth to the bottom of the body 
    • 43 3/8” wide at the front 
    • 19” from front to back 
    • Bottom opening is 35 ¼ x 6 ½”
    • Pan is 3-1/8” deep or tall

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Ford Script Step Plate
    $54.99
    Product Rating: 4.00 Stars
    Ford Script Step Plate
    x
                Polished aluminum diamond style step plate with 'Ford' logo. 

    Any reference to the names Ford, Chevy, Mopar, Dodge, Plymouth - or any other car manufacturer is for fit, application and reference only!  In no way are we implying the part was manufactured by any car manufacturer.

  • Speedway Liquid Filled Fuel Pressure Gauge
    Speedway Liquid Filled Fuel Pressure Gauge
    x
                

    High quality, liquid-filled stainless steel fuel pressue gauge for remote mounting.

    • 0-15 psi
    • 1-3/4" face
    • 1/8" NPT connection

    910-11852 Instructions (PDF)

  • Sportsman Seat Upholstery Kit
    Sportsman Seat Upholstery Kit
    x
                

    Rugged black vinyl quilted upholstery for Sportsman economy fiberglass seat 900-7006.

  • 1915-31 Ford Windshield Swivel, Stainless
    1915-31 Ford Windshield Swivel, Stainless
    x
                

    These windshield swivels are for 1915-1931 Fords with round tubing windshield frames.

    Ford Windshield Swivel

    • Sold each
    • Stainless finish

    Windshield Mount Guide (GIF)

  • Engine Turned Aluminum Panels
    From: $34.99
    Product Rating: 4.67 Stars
    Engine Turned Aluminum Panels
    x
                You can now give your car the look you have been looking for with our engine turned aluminum panels.  These 0.063" thick aluminum panels are 6" wide and feature 1/2" swirls.
            
  • Universal Body To Frame Cushion Kit
    Universal Body To Frame Cushion Kit
    x
                Our universal body-to-frame cushioning liner mounts between the body and frame of your hot rod, making it ride as good as it looks. Liner measures 1/8" thick and 2" wide and comes in a 25 ft. length. Has an adhesive tape backing to keep it in place when mounting your body.
            
  • Speedway 6 Gauge Set
    $209.99
    Speedway 6 Gauge Set
    x
                
    • Stainless steel bezel
    • Backlit white face
    • Includes:
      • 3-3/8” Mechanical Speedometer       
      • 2-1/16” gauges
      • Six gauge set includes 3 3/8” electric tach as well
    • Mechanical oil pressure gauge and line kit
    • Voltmeter
    • Mechanical water temp gauge
    • Fuel gauge and sender
    • Tachometer NOT for use with solid core wires
    • Tachometer MUST be used with a resistor core wire wire and plugs
  • Warmseats Seat Heater, Waterproof Orange Unit
    Warmseats Seat Heater, Waterproof Orange Unit
    x
                

    Perfect for a roadster or any car without a heater.  These state of the art seat heaters are OEM applications.  Easy to install heaters fit between the foam and upholstery of the seats bottom and back.  The pre-wired heater has a Hi/Lo/Off switch and only draws 3-1/2 amps.  You will need one heater for each vehicle occupant.  12 volt.

  • Universal Wind Wing Brackets
    $79.99
    Product Rating: 5.00 Stars
    Universal Wind Wing Brackets
    x
                

    Universal wind wing brackets for most 1930-1935 Fords and others. Fully chrome plated.

    Designed to screw into windshield posts. Brackets only. Set of four. Glass not included.

    • 5/16" fine thread
    • Main body (or wing): 2-15/16"
    • From bottom mounting face to tip of main mounting body: 1-3/8"
Goto Previous PagePrevious Page
1 2 3 4 5 ... 23