Air and Fuel Delivery
Speedway Motors stocks all the best names in T-Bucket carburetors and intake manifolds! Plus, we have a great selection of fuel cells, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N and R2C. Speedway can fuel your need for speed!
$1.99More InfoOpen 4 Barrel Carburetor Base Gasket(Part #55054)x
Open base gaskets.
From: $4.99More InfoSure Seal O-Ring Air Cleaner Spacer(Part #91011063)x
This unique sealing ring spacer has O-ring on the carburetor side to prevent dust from entering past the filter base. Also allows you to raise the filter up for additional clearance.
Available in three heights: 1/2", 1" or 2".
$119.99More InfoNewFST RPM300 Flo-Max Fuel Filter System with 1/2 Inch NPT Ports(Part #910117300)x
This fuel filter system from FST Performance was engineered to combine high efficiency fuel filtration in the smallest possible design. Its fuel flow capabilities and low fuel restriction make this the most innovative and efficient system built. This filter features a unique multiport design that provides a dual inlet and outlet port that allows installation flexibility.
- The RPM300 is the filter system of choice with Jeep owners and has become very popular as an 'in-line' fuel filter for most pleasure boats
- Ports: 4 multi-directional (2-IN & 2-Out) 1/2inch NPT (Pipe) thread
- Fuel Flow: 300 GPH
- Filtration efficiency:187sq inches of 4 micron, water separating media
- Burst: 250psi
- Height: 4.25
- Width: 3
- Depth: 3-3/4
- Weight: 19 oz.
- Base / manifold mounting holes: 7/16"
- For high performance, street, racing, off-road, and marine applications
NewFST RF500 Fuel/Water Separator Filter - 4 Micron for RPM300 and RPM350(Part #910117301)x
This fuel/water separator filter from FST Performance is a replacement for your RPM300 or RPM350 filter system. This item is sold individually.
Note: All FST replacement spin-on filters are only compatible with a specific FST Performance filter base systems. Using with any other filter base, or other application, could cause filter damage, fuel leakage, filter bursting, or improper fuel flow and voids any and all warranty.
From: $10.99More InfoAluminum Fuel Line, 3/8 Inch O.D.(Part #91011430)x
Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing will save weight and money.
- Use with tube nut couplers, sleeves and 37° flared AN fittings
- Rated to 250 psi
- Not recommended for high pressure (brake) applications
- Available in 10 ft., 20 ft., or 30 ft. coils
Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.
$9.99More InfoFuel Filter Mounting Bracket(Part #910117)x
These fuel filter mounting brackets are CNC machined aluminum. Available in 1-3/8", 1-1/2", or 1-3/4" round tubing.
These brackets are designed to be used with our filters. Hole is 2" inner diameter.
$7.99$10.00More InfoSpeedway Fuel Cell Foam, 14 x 4 x 6 Inch(Part #6007050)x
Compatible with gasoline, E85, or alky fuels (not recommended for use with nitro-methane). This fuel cell safety foam keeps weight transfer/shift to a minimum, which provides you with more responsive and predictable handling. Can be cut and stacked as needed.
Blocks are sold EACH.
$24.99More InfoAfco 4# Fuel Pressure Sending Unit (1/8 Inch Pipe)(Part #10685284)x
Afco 4# Fuel Pressure Sending Unit
- 1/8 Inch Pipe
"T-Bucket, Air and Fuel Delivery" Page 1 of 50
Page 1 of 50
$13.99More InfoAFCO 10171 Bushing Kit w/ RH Threaded Female Rod End(Part #10610171)x
AFCO Throttle Rod Components
$39.99More InfoTribute T Integral Fuel Tank Mount / Riser(Part #91633050)x
Use this integral tank mount & riser to complete your tribute-t fuel tank installation.
- Set of 2
- Plain aluminum finish
$231.99More InfoWeiand 7530 Team G Chevy Small Block Manifold(Part #8057530)x
The Weiand Team G is a 360° single-plane, open plenum manifold developed for competition S/B Chevy V8s. Features an isolated plenum and isolated water cross-over to keep the incoming air/fuel charge cooler for improved power. Effective power range is 2800-7200 RPM.
Square carburetor mounting flange.
MPD Racing 94-73800 BLACK Fuel Shut Off Valve for Fuel Filter, -12 AN(Part #546738)x
Replacement fuel shut off valve for Speedway aluminum fuel filters. Has a -12 AN outlet with O-ring. Teflon sealed ball valve inside.
$109.99More InfoJAZ Fuel Cell Fuel Level Sending Unit, 0-90 Ohm, 8 Inch(Part #458890)x
These bolt-in fuel level sending units from JAZ Products feature a positive seal and a 2.3" O.D. bung. For GM gauges with 0-90 ohm range.
Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.
$389.99More InfoEdelbrock 1413 Performer 4 Barrel Carburetor, 800 CFM, Electric Choke(Part #3251413)x
Please view the product's page for more information
$179.99More InfoAeromotive 11140 340 Stealth Fuel Pump, Centered Inlet(Part #91011140)x
The Aeromotive 340 Stealth Fuel Pump is a high-output, in-tank, electric fuel pump that fits most popular EFI applications. It is a compact, lightweight pump that bolts into many existing hanger assemblies.
What sets the 340 Stealth Pump apart is its superior flow throughout a wide pressure range. Compared to other popular aftermarket pumps, at 40 psi the 340 boasts more than 340 lph. That’s over 30% more flow, making it ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the OE configuration. The 340 is also perfect for use as a universal replacement for applications that require more flow to support forced air power adders such as turbo and supercharged applications.
- Fits most vehicles where popular aftermarket pumps are applicable
- Designed for in-tank use only
- Can be used in carbureted or EFI applications
- Turbine pump mechanism increases durability and can be used in pulse modulated applications
910-11140 Instructions (PDF)
$17.99$21.95More InfoLokar XSRK-4001 Black Stainless Steel Carburetor Bracket(Part #49104001)x
Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads. Design provides improved clearance on Edelbrock carbs. Design includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.
- Mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads
- Stainless steel
- Improved clearance on Edelbrock carbs
- Includes tension screw to prevent bracket movement under extreme pressure
$249.99More InfoKinsler Fuel Injection 5800 Spun Aluminum Tank, 2 Gallon(Part #473500)x
Beautiful, brush-finished .080" wall spun aluminum tank with a knurled, billet aluminum, non-vented screw-on cap. Two female 3/8" NPT fittings on top, one female 3/4" NPT fitting on the bottom.
Mounting brackets sold separately.
$103.99More InfoWaterman 935566D Dash Mount Fuel Shut Off Valve, -6 AN(Part #9109355661)x
Dash mount is AN6 male with offset style handle. Fuel cell ball valve mounts in plate. Required for many Sprint cars. They are designed to be plumbed inline and mount close to the driver.
- Engineered specifically for sprint car applications
- -6 AN male to male fuel shut off valve
- Designed to be plumbed inline and mount close to the driver
Fuel Pump Push Rod Bushing for 1949-53 Ford and Mercury Flathead V8(Part #56052664)x
These fuel pump push rod bushings for 1949-1953 Ford & Mercury Flathead V8 are 1-9/16" long. They work perfect with our push rod (56052662).
- Fuel pump push rod bushing
- For 1949-1953 Ford & Mercury Flathead V-8
- 1-9/16" long
- For push rod (56052662)
$421.99More InfoHolley 0-80670 Avenger 670 CFM 4 Barrel Carburetor, Electric Choke(Part #42580670)x
The Holley Street Avenger Model 4150 four barrel carb is the ultimate vacuum secondary street performance upgrade. This 4 barrel carb is street ready right out of the box and features a calibrated electric choke, air and fuel adjustments and built in fuel filters. There are clear sights for easy float adjustments, adjustable vacuum secondaries and four vacuum ports. Plus it has a million mile power valve, is 100% wet flow tested and includes fittings.
- No Trouble quick change vacuum secondaries - up to 6% more acceleration or 5% better fuel economy with simple spring change (springs included)
- Vacuum secondaries allow use on wide variety of vehicles
- Tuneable fuel metering system
- Dual feed fuel inlet
- 1 timed (spark) port, 2 full vacuum, and 1 PCV port
- Ford A/T kickdown, does not work with A.O.D. transmissions
- Calibrated for monster low-end torque, awesome acceleration, & unmatched top-end horsepower
- Bolt on & go design
- Electric choke
$179.99More InfoNewOTB Gear 4660 Orbit Cast Spun Aluminum Air Cleaner(Part #9104660)x
This Orbit cast heavy aluminum spun air cleaner from OTB Gear has a truly unique look. The spun shell can be painted or clear coated.
- Polished casting countersunk into heavy wall satin aluminum spinning
- Outer shell can be painted or clear coated
- Washable permanent filter
- Fits standard 5" four bbl. Carb
- Diameter 12" - height 4-1/2"
- Made in the USA
$129.99More InfoOTB Gear 4461 Orbit Style Air Cleaner, Offset Base, Polished(Part #2474461)xThe inspiration for "Orbit" came from the the '30's - '40's Ford horn button design. But repeating rings were a very popular design theme by a number of auto builders. Got twin 4's with real tight spacing? The selection of air cleaners for you has been pretty slim, right? Many manifolds out there position the carbs with only 6-7/16" center to center. This variation features a 1/4" offset base to deal with this problem - a simple solution to an old issue. If spacing this tight isn't your problem, we have a straight base also. If running twin carbs, check your center to center spacing. We use our Platinum Series air filter with A-356 aircraft grade castings for a show quality product. The filter media is a medium gray, washable oiled cloth. Prefer to have an unpolished finish? You can have that too. Hardware furnished includes a polished stainless socket drive top screw. Diameter 6-3/4" - Height 4-1/2". Fits carbs with the typical 5" base.
- Washable Filter Media
- 1/4" Offset base plate
- Fits carbs with standard 5-1/8" neck
- Diameter 6-3/4"
- Height 4-1/2"
- Hardware furnished includes a polished stainless socket drive top screw
- Priced and sold as single assembly - purchase 2 for a twin carb application
$149.99More InfoEdelbrock 5001 Small Block Chevy Torker II Intake Manifold(Part #3255001)x
Designed for 1955-86 high-performance 262-400 c.i.d. small-block Chevy V8s operating in the 2500-6500 RPM range. The Torker II is an updated version of original Torker offering better performance. Manifold accepts late-model waterneck, air-conditioning, alternator and H.E.I. distributor.
Will fit Corvette and 1987 and later stock aluminum heads. Will NOT fit 1987 and later cast iron heads and will NOT cover port openings of Chevrolet Bowtie or LT1 heads.
NOT intended for use on heavy vehicles (trucks, vans etc.).
$44.99More InfoSpeedway Aluminum Fuel Log for Demon Carburetor(Part #91011600)x
Ensures adequate fuel pressure to carburetor and helps eliminate fuel starvation problems. Fuel pressure is regulated after carburetor has been supplied and not before. Must use return fuel line to take full advantage of benefits.
Features AN8 inlet and two AN8 outlets. Threaded 3/4" NPT (plugged) on back that can be used for a return line. Also has 1/8" NPT outlet for fuel pressure gauge, fittings sold separately.
$1,789.99$1,989.99More Info(3) 9 Super 7 Carbs on Small Block Chevy Edelbrock Vortec Intake, Chrome(Part #925123)x
This kit uses the Edelbrock S/B Chevy '96-up Vortec-style 3x2 intake with 3-bolt carbs. It includes a progressive linkage to give you excellent driveability and economy, with power when you need it. It includes three Speedway 9 Super 7® carbs, the intake manifold, air cleaners, linkage kit, fuel block, fittings, and red fuel line.
From: $29.99More InfoSpeedway Holley Mechanical Fuel Pump Fuel Line Kit(Part #6174090)x
This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.
Fitting sizes listed indicate fuel pump outlet fitting size.
Style Choice Guide:
- ALU - aluminum fittings with blue hose
- SS - aluminum fittings with stainless hose
- STL - steel fittings with blue hose
$64.99More InfoFlamed Billet-Style Oval Air Cleaners(Part #91011037)x
Theses highly polished aluminum air cleaners have the look of billet without the expense. Available with flame top.
Measures 3" high, 8-3/8" wide. Fits 5-1/8" single quad air horns.
$999.99More InfoEdelbrock Big Block Chevy Dual Quad Set-Up, Rectangular Port(Part #92519917)x
There is nothing sweeter looking or sounding than a dual quad on a Chevy! This one kit gets you two manual choke Edelbrock carbs, an Edelbrock unpolished intake manifold, fuel line and special progressive linkage. Just add a suggested air cleaner to finish your installation.
- 1500-6000 RPM
- Will clear HEI distributors
- Will not fit tall-deck truck blocks
- Has 6-7/16" carb centers
Overall Height from the bottom of the intake to the top of the air cleaners below:
Height from bottom of intake to carb mounting surface: 4.899"
- Port exit dimensions: 1.66" x 2.30