McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Phone

800.979.0122

Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 5

Suspension

Browse our wining racing and performance auto parts.

MORE
Suspension
X

Shop Suspension At Speedway Motors

Nothing beats a car with the right suspension set-up. Whether it's on the track or on the street, Speedway Motors is ready to set you up with the suspension components you need. From leaf springs and coil-overs to torsion bars and shocks, our techs can get you the set up you want on pretty much anything with wheels!

Suspension Kits

Products
Featured Products
  • Product Rating: 4.20 Stars
    $229.99
    Quick View Details
    x
                

    Features heavy wall 21-1/2" rods with plain steel brackets. Exclusive sandwich-style brackets give greater bar support and incorporate a multi-position lower coil-over mount. 

    Complete kit includes: mild steel rods, steel brackets, bushed rod ends, and hardware. Lower coil-over shock mount stud not included. The nuts & bolts supplied in this kit are NOT polished or plated.

    • Rod length is 21-1/2"
    • Center-to-center of 4-bar eyelets is 5.5"
    • Bracket width is 1.39"

    This kit comes in two varieties:

    • TA - to fit narrow frames such as Model T or Model A
    • 3234 - to fit wider frames such as 1932-1934 Ford

    Note:  Four bar rear suspension kits require the use of a side to side control such as a panhard bar or a watts link component.

    916-49055 Instructions (PDF)

    Go to Product Page
  • Product Rating: 5.00 Stars
    $534.99
    Quick View Details
    x
                

    This rear suspension kit is loaded with high quality components from Speedway and Carrera. Kit includes a steel panhard bar, chrome plated Carrera coil-over shock assemblies, bare steel 32" radius rods, and all mounting brackets and hardware. The Carrera 3-way adjustable, gas pressurized and radial tuned shocks provide an excellent ride. Welding is required for assembly.

    • Kit includes:
      • Steel panhard bar
      • Chrome plated Carrera coil-over shock assemblies
      • Bare steel 32" radius rods
      • All mounting brackets and hardware

    Comes with your choice of spring rate. Use the Spring Rate Guide and Coil-Over Mounting guide to select to proper rate for your vehicle.

    Spring Rate Guide (GIF) 

    Coil-Over Mounting Guide (GIF) 

    916-49060 Instructions (PDF)

    Go to Product Page
  • Product Rating: 5.00 Stars
    $439.99
    Quick View Details
    x
                

    For 1937-1948 early Ford passenger car spindles. Maximum car weight 2500 lbs.  Plain steel construction.

    Kit includes:

    • Two 1-3/4" spring shackles w/ nylon bushings
    • Two spring pivots
    • 26" 4-leaf spring w/ nylon buttons
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 4" dropped
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" Heims with jam nuts
    • Spring U-bolts sold separately

    Instructions (PDF)

    Front Axle/Suspension Tech Tips (GIF) 

    Go to Product Page
  • Product Rating: 4.50 Stars
    $599.99
    Quick View Details
    x
                

    Speedway Radius Rod I-Beam axle kits are designed to fit '28-'31 Model A and '32-'34 Ford frames. I-Beam axles require '37-'48 Ford passenger car spindles. Kits are available in Plain steel or Chrome.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" dropped
    • 27" hairpin radius rods
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide spring, 1-3/4" wide
    • All hardware for assembly

    916-39506 Instructions (PDF)

    Front Axle/Suspension Tech Tips (GIF)

    Go to Product Page
  • New
    No Reviews
    $2,294.99
    Quick View Details
    x
                

    This AccuAir E-Level Air Management Kit with Touchpad includes everything you need to control the air suspension on your ride. This kit includes top of the line e-level controller with touchpad, two 400c compressors with a 5 gallon tank, and it features 3 programmable ride heights. This kit also features 3/8" D.O.T approved plumbing kit and 4 corner valve unit. This is a great all in one package!

    • E-level controller with touchpad
    • 400c compressors (2)
    • 5 gallon tank
    • 3 programmable ride heights
    • 3/8" D.o.t approved plumbing kit
    • VU4 4-Corner Solenoid Valve Unit provides responsive and reliable air spring control in a single compact, pre-wired, leak-free package
    • Includes e-Level 4-Corner Electronic Leveling System Features:
      • 3 Programmable Heights Lowered / Ride Height / Raised
      • RideMonitor Mode adjusts as needed while driving or parked
      • TruPosition Height Sensors provide accurate leveling regardless of load
      • Ride-Height-on-Start gets you ready to drive when you turn the key
      • Anti "Cross-loading" Height Management gives balanced spring weights
    • Automatically Calibrates to any Air Suspension System on any vehicle, (NO user programming required)
    • Straight to Height adjustments avoid valve "pulsing" and gets you ready to drive immediately
    • Active Learning maximizes leveling performance after every adjustment
    • Manages Air Compressors for faster recovery
    • Monitors Vehicle Voltage and automatically turns compressor(s) OFF at 10.5 volts to prevent a dead battery
    • 100% Weather-Proof for under vehicle mounting
    • Plug-n-Play wiring harnesses for ease of installation
    • Each System is 100% Factory Tested

    Each Stage 2 Kit Includes:

    • (1) e-Level Electronic Leveling System w/ TouchPad Interface
    • (1) VU4 4-Corner Solenoid Valve Unit
    • (2) Viair 400C Compressors
    • (1) 5-Gallon Anodized Aluminum Air Tank
    • (1) Anodized Aluminum Serviceable Air Filter w/ 3/8" Straight Fittings
    • (50') 3/8" D.O.T. Approved Air Line
    • (4) 3/8" - 1/4" NPT D.O.T. Approved Swivel Elbows for Air Springs
    • (1) 3/8" - 1/4" NPT D.O.T. Approved Straight Fitting for Tank
    • (1) 6 ml tube of Loctite 565 Thread Sealant
    • (1) Stainless Steel Mounting Hardware Package
    • (1) Illustrated Installation & Operation Manuals

    Installation Manual (PDF) 

    Operation Manual (PDF) 

    Additional Information (PDF) 

    Go to Product Page
  • Product Rating: 4.00 Stars
    $1,179.99
    Quick View Details
    x
                

    Includes standard upper and offset strutless lower control arms, new standard spindles, rubber brake lines, new black stock type springs and shocks, new manual or rebuilt power rack & pinion with bushings and new tie rods. The 11" brake kit features GM Metric calipers, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.

    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New Stock Spindles, Springs, and Shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-1/2" - 33-1/2" frame widths, you will be required to purchase 2" Inner Tie Rod Extensions (91034345) or (91034346).

     

    Go to Product Page
  • Product Rating: 5.00 Stars
    $24.99
    Quick View Details
    x
                

    These nylon bushings for 4-bar ends are perfect for your custom build. Bushing fits rod ends with a 1.125" I.D. and rod end width of 1.485". The steel sleeve I.D. is 0.625", O.D. is 0.815" and the length of the sleeve is 1.76". Kit includes a set of 8 bushings with 8 sleeves.

    Note: These bushings are not a replacement for Speedway 4-bar rod ends as they are wider. If you are trying to use this bushing kit with a Speedway 4-bar rod end, please note that it will not be a direct fit. You will need to trim 0.435" off the overall width to match the 1.050" width of the bushing that came with the Speedway rod end.

    Go to Product Page
  • Product Rating: 4.50 Stars
    $439.99
    Quick View Details
    x
                For 1949-1954 early Chevy passenger car spindles. Maximum car weight 2500 lbs. 

    Kit includes:

    • Two 1-3/4" spring shackles w/ nylon bushings
    • Two spring pivots
    • 26" 4-leaf spring w/ nylon buttons
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 4" dropped
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" Heims with jam nuts
    • Spring U-bolts sold separately

    Front Axle/Suspension Tech Tips (GIF)


    Go to Product Page
No Reviews
$379.99
In Stock
Product Rating: 4.00 Stars
$1,379.99
Backorderable
Product Rating: 5.00 Stars
$1,399.99
Backorderable
Product Rating: 4.00 Stars
$434.99
In Stock
On Sale
Product Rating: 3.50 Stars
$699.99 $649.99
In Stock
No Reviews
$84.99
In Stock
No Reviews
$199.99
In Stock
No Reviews
$1,199.99
Backorderable
No Reviews
$1,104.99
Backorderable
No Reviews
$1,179.99
Backorderable
No Reviews
$289.99
In Stock
No Reviews
$1,179.99
Backorderable
Product Rating: 4.00 Stars
$1,179.99
Backorderable
No Reviews
$1,059.99
Backorderable
No Reviews
$239.99
In Stock
No Reviews
$1,179.99
Backorderable
Garage Sale
No Reviews
$48.99 $18.99
In Stock
No Reviews
$1,194.99
In Stock
No Reviews
$1,379.99
Backorderable
No Reviews
$1,184.99
In Stock
On Sale
No Reviews
$299.99 $279.99
In Stock
No Reviews
$2,529.99
Made to Order
Product Rating: 5.00 Stars
$439.99
In Stock
Product Rating: 4.00 Stars
From: $249.99
In Stock
Garage Sale
No Reviews
$9.99 $4.99
In Stock
No Reviews
$1,345.99
Backorderable
No Reviews
$1,499.99
Backorderable
Product Rating: 5.00 Stars
$599.99
In Stock
Product Rating: 4.50 Stars
$599.99
In Stock
Product Rating: 5.00 Stars
$409.99
In Stock
Page 1 of 5