Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 16

Products

Heim Joints

Shop Heim Joints / Rod End Bearings At Speedway Motors

Rod end bearings (heim joints) are used all over your chassis, steering and suspension. Common uses include control rods, steering linkage, and tie rods. With so many different uses, it's no wonder Speedway Motors stocks a huge supply of heim joints for race cars or street cars. Whether you're looking for aluminum or chromoly, male or female, we can help by providing rod end bearings from the biggest names in the business, like AFCO Rod Ends, QA1 Rod Ends, Rod End Supply, and FK Rod Ends. Check out our Heim Joint Buyer's Guide if you need help selecting the right heim for the job.

Featured Products
  • Std Heim 5/8" RH Male
    $5.99
    $7.99
    Product Rating: 4.40 Stars
    Std Heim 5/8" RH Male
    (Part #1750106)
    x
                

    These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole
    Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole
    (Part #1750757)
    x
                3/4" heim for steering shaft.  Has .757 ball hole. Slides right over standard 3/4" steering shaft. 3/4" NF right hand threads. Jam nut sold separately.


  • Std Heim 5/8" LH Male
    $5.99
    $7.99
    Product Rating: 4.00 Stars
    Std Heim 5/8" LH Male
    (Part #1750306)
    x
                

    These standard rod ends are a general purpose, two piece design. They have a carbon steel body and a hardened ball with metal to metal contact.

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Rod End Chart (GIF)

  • Standard Steel Heim Joint Rod Ends, 3/8-24 RH Male
    Standard Steel Heim Joint Rod Ends, 3/8-24 RH Male
    (Part #1750103)
    x
                

    These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Pro-1 Chromoly Heim Joint Rod Ends, 5/8-18 RH Male
    Pro-1 Chromoly Heim Joint Rod Ends, 5/8-18 RH Male
    (Part #1750506)
    x
                

    These Pro-1 rod ends are general purpose, 2-piece, heavy duty rod ends. They feature a chromoly steel body and are black oxide coated to resist corrosion. Heat treated, precision ground ball without a race (metal to metal contact). Pro-1 ends will withstand a greater static load than our "Standard" or "Precision" rod ends.

    Applications: Steering & suspension components on moderate to high horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Pro-1 Rod End Chart (GIF)

  • Standard Steel Heim Joint Rod Ends, 3/8-24 LH Male
    Standard Steel Heim Joint Rod Ends, 3/8-24 LH Male
    (Part #1750303)
    x
                

    These standard rod ends are a general purpose, two piece design. They have a carbon steel body and a hardened ball with metal to metal contact.

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Rod End Chart (GIF)

  • Standard Steel Heim Joint Rod Ends, 3/4-16 RH Male
    Standard Steel Heim Joint Rod Ends, 3/4-16 RH Male
    (Part #1750107)
    x
                

    These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Standard Steel Heim Joint Rod Ends, 1/2-20 RH Male
    Standard Steel Heim Joint Rod Ends, 1/2-20 RH Male
    (Part #1750105)
    x
                

    These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

    Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

    Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Filter

"Suspension Arms, Bushings and Accessories, Heim Joints" Page 1 of 16

Page 1 of 16

  • Chrome Plated Chromoly Heim Joint Rod Ends, 5/8-18 RH Male
    Chrome Plated Chromoly Heim Joint Rod Ends, 5/8-18 RH Male
    (Part #91002106)
    x
                Teflon lined & heat treated, hard Chromoly ball. 5/8"-18 shank & 5/8" hole.
            
  • Speedway Steel 5/8 Inch LH Male Heim Joint Rod Ends with Stud
    Speedway Steel 5/8 Inch LH Male Heim Joint Rod Ends with Stud
    (Part #1750329)
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of.  They are teflon lined.
            
  • Seals-It WS7500 Heim Joint Rod End Seals, 3/4 Inch Hole, Set/6
    Seals-It WS7500 Heim Joint Rod End Seals, 3/4 Inch Hole, Set/6
    (Part #91001505)
    x
                

    These rod end seals are a neoprene rubber seal bonded to an aircraft quality washer. Extends the life of your rod ends by keeping the dirt, debris and moisture out of the spherical ball. They fit on both sides of the ball end of the heim joint and are sized to match the hole in the spherical ball.  

    For use with standard and Pro 1 Series rod end only. Sold in sets of six, which will cover both sides of three rod ends.

  • FK Rod Ends ALRSM8-6B Black Aluminum Jacobs Ladder Heim Joints, 5/8-18
    FK Rod Ends ALRSM8-6B Black Aluminum Jacobs Ladder Heim Joints, 5/8-18
    (Part #150018)
    x
                Eliminate the need to add a spacer or drill your ladder.  This 3 piece extra strength heim threads into the birdcage and reduces to a 3/8" hole.                               
    • 3 piece extra strength rod end with heavy duty shank
    • Ball is made of 52100 steel, heat treated and hard chrome plated
    • Race is heat treated steel alloy, zinc plated and chromate treated
    • Body si 7075-T6 aluminum with hard black anodize finish
    • Works with 5/8"-18 thread size jam nuts
  • Speedway Steel 5/16 Inch LH Male Heim Joint Rod Ends with Stud
    Speedway Steel 5/16 Inch LH Male Heim Joint Rod Ends with Stud
    (Part #1750322)
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of.  They are teflon lined.
            
  • AFCO 10457 Chromoly Heim Rod End, 5/8-18 LH Male
    AFCO 10457 Chromoly Heim Rod End, 5/8-18 LH Male
    (Part #10610457)
    x
                
    • Chromoly body - 2 piece design
    • Designed for heavy duty applications
    • Rough conditions steering/offroad
    • Ball - 52100 steel hard chrome plated
    • Race - N/A
    • Body - 4130 chromoly
    • Max Static Load - 18,000 lbs.
  • Aluminum LH Female Heim Joint Rod Ends, 1/4 Inch
    Aluminum LH Female Heim Joint Rod Ends, 1/4 Inch
    (Part #1170712)
    x
                

    Aluminum rod ends have close tolerance, 3 piece, medium duty rod end.  Hard anodized 7075-T6 aerospace quality aluminum body.  Heat treated, 5210 precision ground ball, Kevlar race.  Self lubricating Teflon liner to seal out dirt an debris.

    Applications: Designed for motorsports application where weight is critical.  All of the strength & features of the precision rod ends at half of the weight.

    ASSEMBLY TIP:
      To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Garage Sale - Pro-1 Series Heim Joint Rod Ends 3/4-16 LH Male 5/8 Hole
    Garage Sale
    Garage Sale - Pro-1 Series Heim Joint Rod Ends 3/4-16 LH Male 5/8 Hole
    (Part #1750727GS)
    x
                These Pro-1 rod ends are general purpose, 2 piece, heavy duty rod ends. They feature a Chromoly steel body and are black oxide coated to resist corrosion. Heat treated, precision ground ball. Metal to metal contact. They will withstand a greater static load than our "standard" or "precision" rod ends.

    Applications: Steering & suspension components on moderate to high horsepower applications.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Pro-1 Rod Ends Chart Application (GIF)

    These heims are garage sale priced because they are a little loose and can not be sold as firsts.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • FK Rod Ends SJM10T Stainless Steel 5/8 Inch RH Male Heim Joint
    FK Rod Ends SJM10T Stainless Steel 5/8 Inch RH Male Heim Joint
    (Part #1750716)
    x
                
    FK SJM-T/SJF-T/SRSM-T Series rod ends feature 3-piece precision stainless steel construction. These self-lubricating, high-strength rod ends feature bodies and races composed of 17-4PH CRES heat-treated stainless steel and a 440C CRES heat-treated stainless steel ball. FK SJM-T/SJF-T/SRSM-T Series rod ends come standard with a PTFE fabric liner bonded to the race i.d.
    • 5/8" RH male threads
    • 3-piece precision stainless steel construction
    • Self-lubricating, high-strength
    • 17-4PH CRES heat-treated stainless steel bodies and races
    • 440C CRES heat-treated stainless steel ball

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    FK Rod End Chart (Link)

  • Precision Carbon Steel LH Female Heim Joint Rod Ends, 3/8 Inch
    Precision Carbon Steel LH Female Heim Joint Rod Ends, 3/8 Inch
    (Part #1750413)
    x
                Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size. 

    Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

    ASSEMBLY TIP:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Speedway Steel 1/2 Inch LH Female Heim Joint Rod Ends with Stud
    Speedway Steel 1/2 Inch LH Female Heim Joint Rod Ends with Stud
    (Part #1750425)
    x
                These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are Teflon lined.
            
  • Speedway Steel 3/16 Inch LH Male Throttle Linkage Rod Ends with Stud
    Speedway Steel 3/16 Inch LH Male Throttle Linkage Rod Ends with Stud
    (Part #1750320)
    x
                

    These 3/16" rod ends can be used to create a trick throttle linkage system when combined with our swedged aluminum tubing.

    Use with swedged aluminum throttle tube.

  • Aluminum Heim Joint Rod Ends, 5/8-18 RH Male
    Aluminum Heim Joint Rod Ends, 5/8-18 RH Male
    (Part #1171010)
    x
                

    Aluminum rod ends are a close tolerance, 3-piece, medium duty design. Hard anodized 7075-T6 aerospace quality aluminum body. Heat treated, 5210 precision ground ball, Kevlar race. Self lubricating Teflon liner seals out dirt and debris.

    Applications: Designed for motorsports application where weight is critical. All of the strength & features of the Precision rod ends at half of the weight.

    Assembly Tip:
    To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Aluminum Rod End Chart (GIF)

  • Standard Steel Heim Joint Rod Ends, 1/4 Inch LH Male
    Standard Steel Heim Joint Rod Ends, 1/4 Inch LH Male
    (Part #1750301)
    x
                

    These standard rod ends are a general purpose, two piece design. They have a carbon steel body and a hardened ball with metal to metal contact.

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Rod End Chart (GIF)

  • Garage Sale - HD Aluminum Heim Joint Rod Ends, 3/4-16 RH Male Hole
    Garage Sale
    Garage Sale - HD Aluminum Heim Joint Rod Ends, 3/4-16 RH Male Hole
    (Part #175XALM10)
    x
                

    These heavy duty aluminum heims have a 3/4" right hand stud and feature a 5/8" hole.

    Clearance!

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - 3/4 Inch LH TFE Rod End
    $49.99
    $73.99
    Garage Sale
    Garage Sale - 3/4 Inch LH TFE Rod End
    (Part #175PRB12T)
    x
                

    Clearance!!

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS**  

     

    3/4" LH TFE Rod End

    Body - 4340 Steel Alloy, Heat Treated, Plated
    Race - Stainless Steel, Heat Treated PTFE Lined
    Ball - 52100 Alloy steel, Heat Treated, Hard Chrome Plated

     

  • Garage Sale - TFE RH 5/16 Inch Tie Rod End
    Garage Sale
    Garage Sale - TFE RH 5/16 Inch Tie Rod End
    (Part #175PRM5T)
    x
                

    Body - 4340 Steel Alloy, Heat Treated, Plated
    Race - Stainless Steel, Heat Treated PTFE Lined
    Ball - 52100 Alloy steel, Heat Treated, Hard Chrome Plated

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • AFCO 10821 Solid Heim Rod End, 3/4-16 RH Male, 1/2 Inch Hole
    AFCO 10821 Solid Heim Rod End, 3/4-16 RH Male, 1/2 Inch Hole
    (Part #10610821)
    x
                

    Use as a strut rod mount on stud type lower arms or can also be used as a lower inner control arm mount. 

    • 3/4"-18 RH fine threads
    • 1/2" bore 
    • Thickness @ outside of rod: 3/4" at the hole
  • Garage Sale - 3/8 Inch Aluminum Heim Joint Rod Ends
    Garage Sale
    Garage Sale - 3/8 Inch Aluminum Heim Joint Rod Ends
    (Part #91200091)
    x
                

    Heavy duty 3.8" heim. Anodized aluminum with a steel ball.

     

    This is garage sale priced because it has been installed and has some scratches. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 7/16 Left Hand Thread TFE Rod Ends
    Garage Sale
    Garage Sale - 7/16 Left Hand Thread TFE Rod Ends
    (Part #175PRXB6T)
    x
                

    High Strength Alloy - Heavy Duty Shank
    Body - 4340 Steel Alloy, Heat Treated, Plated
    Race - Stainless Steel, Heat Treated PTFE Lined
    Ball - 52100 Alloy steel, Heat Treated, Hard Chrome Plated

     

    These rod ends are garage sale priced because they have been discontinued from our current product line.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

Goto Previous PagePrevious Page
1 2 3 4 5 ... 16