Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Banner

Want your hot rod to look cool at the show and hot on the street? Speedway Motors has you covered! Whether you’re building a low-buck rat rod roadster, Deuce coupe or fat-fendered sedan, Speedway has thousands of street rod parts, chassis, frames, aluminum radiators, crate engines, accessories, and a variety of professionally engineered street rod kits in stock, ready to ship. Best of all, Speedway's friendly and knowledgeable Techs can help you get the performance hot rod parts you need to get your GM, Chevy, Mopar or Ford car on the road and looking its best.

Featured Products
Speedway Economy 12 Circuit Wiring Harness
Speedway Economy 12 Circuit Wiring Harness
x
            

This harness was designed to offer you all the highest quality components in a package designed for cars with minimum accessories. Each wire is color coded and labeled every few inches.

Our prewired 12 circuit kit will fit all your basic needs and makes wiring a painless process. It is designed especially for the street rod without accessories. It also includes horn relay and connector, turn and hazard signals, dimmer switch connector, circuit breaker for headlights, two flashers, one alternator plug, two ignition switch connectors, plus more.

  • Mainfuse box base is 1-7/8" x 3-11/16"
  • Box height is 3-3/4"
12 Circuit Wiring Harness Installation Instructions (PDF)
Speedway Chevy Universal Aluminum Radiators
Speedway Chevy Universal Aluminum Radiators
x
            

Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

  • All-aluminum, furnace-brazed construction
  • No cheap epoxy glue or crimped in gaskets
  • Maximum amount of fins per inch allows greater heat transfer
  • Billet filler necks
  • Available in 22", 24", 28", or 31" widths (measurements include tanks)

Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
x
            

Designed for a clean and simple install onto Model T, Model A, and 1932 Ford frame. The included 1" bore remanufactured master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The outlet ports are 3/8"-24 IFF. The bracket can be bolted or welded to the left frame rail (boxed or stock).

Kit includes a dual feed master cylinder, frame bracket, and a steel pedal arm w/ pad that can be easily modified for driver comfort.

Note: Will NOT work in conjunction with the factory clutch pedal. Intended for use with an Automatic Transmission.

916-31926 Instructions (PDF) 

Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

Speedway 1928-1948 Ford Forged Spindles w/ King Pins
Speedway 1928-1948 Ford Forged Spindles w/ King Pins
x
            

These Speedway spindles are one piece, drop forged design constructed of high strength 4140 steel, which makes them superior to original components. These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford king pins.

These spindles fit Ford axles from '28-'48. They can be used with period correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from '28-'36.

  • Uses 1937-1941 king pin kit
  • For Ford axles 1928-1948
  • Will not work with 1928-1936 Hubs
  • Includes king pin kit

Be sure to include our spindle nut kit (910616004) to properly install these spindles.

Spindle Identification Guide (GIF)

910-32104 Instructions (PDF)

Ford 9 Inch Posi Traction Third Member Assembly
Ford 9 Inch Posi Traction Third Member Assembly
x
            

Speedway Motors now offers you a 9" Ford street 3rd member for your street rod. We reclaim genuine Ford 9" housings, clean, inspect and install all new components. All bearings, seals, 1310 series yoke and ring & pinion are new!

These Ford 9" 3rd member assemblies feature new Pro Gears ring & pinion, choice of 3.50, 3.70, 3.89, 4.11 or 4.56, Currie 9-Plus limited slip differential, 28 or 31 spline. Shipped in handy plastic carrying case. Assembled by professionals.

 

Currie Differential Tech Bulletin (PDF)

 

910-48345 Instructions (PDF)

Basic Brake Kit 1978-88 GM Caliper to Early Ford Spindles
Basic Brake Kit 1978-88 GM Caliper to Early Ford Spindles
x
            Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car spindles. No machine work needed. Please see below for suggested 1973-77 GM type 11" brake rotor part #'s required.

Kit Includes:
  • GM to Ford brake brackets
  • 1978-Up hardware
  • Bearing and seal adapters
  • Seals
  • Inner bearing cups
  • Inner bearing cones
  • Spacers
  • Instructions
  • Does not include dust caps, washers or spindle nuts

This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for Street Rods based on 1932-48 Fords. However, for or a T bucket or early roadster, you might consider the Wilwood kits shown below.

702-4475 Instructions (PDF)

Speedway Vega Style Steering Box Combo, All New Assembly
Speedway Vega Style Steering Box Combo, All New Assembly
x
            

Speedway Motors makes it easy to bolt together a cross steering system with our Vega Steering Box Combo kit. Kit includes a Speedway Vega box, steel pitman arm, and a Ford Model T - 1934 frame mount. This steering box accepts a 5/8" 36-spline U-joint or coupler.

Kit includes:

  • Speedway Vega Steering Box
    • 20:1 steering ratio
    • 5 turns lock-to-lock
  • Steel Vega Pitman Steering Arm
    • Plain finish 
    • Non-offset design
    • Double-tapered "Ford" tie rod end hole (lets you attach the drag link on the top or on the bottom)
  • Vega Steering Box Mount
    • Fits Model T thru 1934 Ford frames
    • Weld-on design
O-Ring to Inverted Flare Power Steering Adapter
O-Ring to Inverted Flare Power Steering Adapter
x
            

If you have a power steering pump using late model style O-ring sealed hoses that you need to adapt to traditional inverted flare hoses, this inverted flare adapter is a simple fix. Simply insert the adapter into the flow control fitting and then install your inverted flare hose.

Use to convert from 16mm o-ring to 5/8" inverted flare style.

"Street Rod" Page 1 of 25

  • Low Profile Grease Zerks
    $7.99
    Product Rating: 5.00 Stars
    Low Profile Grease Zerks
    x
                

    Great for spindles and other areas needing added clearance. Stainless steel construction with 5/16" hex head with 1/4 - 28 UNF thread.

    Includes 5 zerks per bag. MUST be used with grease needle # 910-1187.

  • Head Stud Remover and Tap Alignment
    Head Stud Remover and Tap Alignment
    x
                

    Allows removal of stock press-in studs and aligns the tap (7/16"-14) to simplify the installation of screw in rocker studs.

    For S/B Chevy V8 engines.

  • Sill Weather Whisker Strip
    $29.99
    Sill Weather Whisker Strip
    x
                After putting in new glass and window felt run channels, you don't want to reuse your old whisker that's on your garnish moldings, so here's a way to prevent scratching up that new glass. We now offer a 48" long, 9/16" tall whisker strip. Only offered in black.
            
  • Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    x
                

    Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°.

  • RideTech 90006781 Air Spring for Mustang II Suspension
    RideTech 90006781 Air Spring for Mustang II Suspension
    x
                These air springs are the industry standard for use on Mustang II based front suspensions. Rated 2140@100 lbs air pressure. Installed height is 4-1/2"-5" with a minimum height of 3" and a maximum of 7". 6-1/2" diameter when inflated. 1/4" NPT. Two 3/8" studs on top and one 3/8" hole on bottom.
            
  • 1928-31 Model A Front Crossmember
    1928-31 Model A Front Crossmember
    x
                

    These replacement 1928-31 Model 'A' Ford front crossmembers lower a Model A chassis 2" below a stock crossmember. Replaces a cracked original or use it to start your reproduction frame off right. Made of heavy, 7-gauge steel with clearance for 1-3/4" cross spring. Welds to frame boxing plates of original or repro chassis.

  • Speedway Ultrasonic Multi-Purpose Parts Cleaner
    Speedway Ultrasonic Multi-Purpose Parts Cleaner
    x
                

    This ultrasonic parts cleaner is ideal for cleaning carburetor parts, fuel injector parts, small items such as wheel bearings, and other delicate components. Features a 6.6" x 5.4" x 2.5" tank size and includes a cleaning basket. 

    • Works on 110 volt power
    • Adjustable timer in 5 min. increments up to 30 mins.
    • Works well with a white vinegar solution
  • Specialty Power Windows WWK-2 Standard Universal Wiper Drive Kit
    Specialty Power Windows WWK-2 Standard Universal Wiper Drive Kit
    x
                

    This universal, dual wiper drive kit has two wiper shafts that are driven by a remote mounted, commercial duty, 2-speed wiper motor. The sweep is adjustable from 90°-160° in 10° increments. Wiper shafts accept arms (not included) that fit 1/2" fine spline knurls or arms that fit 1/4" shafts. 

    This complete drive kit has a standard 72" drive cable and 2-speed rotary (knob) switch.

    Manufactured by Specialty Power Windows.

    Instruction Sheet

  • SPAL Thermoswitch Relay and Wiring Harness Kit
    SPAL Thermoswitch Relay and Wiring Harness Kit
    x
                

    This easy to use cooling fan relay kit includes a labeled wiring harness, 40 amp relay, fuse holder and coolant sensor. Available with 185° on/165° off or 195° on/175° off. Works great with the Spal Pulse-Width Fan Controller.

    • Relay wiring kits are a must-have when installing an electric fan
    • Designed to safely integrate with OEM wiring
    • Waterproof 40/50 Amp relay
    • Printed wires (for ease of installation)
    • 3/8" NPT (National Pipe Thread) stainless steel switch
    • Optional switched override capability
    910-64028 Instructions (PDF)
  • Rocker Arm Balls for 7/16 Inch Stud
    Rocker Arm Balls for 7/16 Inch Stud
    x
                Replacement rocker arm pivot balls with oil slots. Comes in a set of 16 for use with 7/16" rocker arm studs.
            
  • Universal Expanding Body Mounts
    Universal Expanding Body Mounts
    x
                

    If you are building a lightweight car like a "T" or an "A", mounting the body may present a problem. These neat expanding rubber universal body mounts allow you to drill a 3/4" hole in the top of the frame, insert a 3/8" coarse bolt, tighten, then the body is mounted.

    Not recommended for cars newer than 1934.

  • 14mm to Male AN6 Banjo Bolt Fitting for Power Steering Pump
    14mm to Male AN6 Banjo Bolt Fitting for Power Steering Pump
    x
                

    These power steering adapter fittings are designed to simplify the hose connection on your power steering lines. They are made from quality material and are designed to withstand even the harshest environments. The adapter fittings are the perfect solution for adding new lines or for those tight-fit areas where normal, straight fittings won't fit.

    Banjo Bolt Fitting for Power Steering Pump

    • 14mm to Male AN6 
    • Zinc-plated steel assembly
    • For the pressure connection (outlet) to the pump.
    • 90 Degree
    • Swivel
    • Male Threads
  • Tall Model T Cowl-Tail Lights, Black
    Tall Model T Cowl-Tail Lights, Black
    x
                

    Features a 12 volt dual element bulb and can be used as a tail light or a cowl light. 9-1/2" tall with 3" diameter lens. Specify red or amber lens.

    Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

    Cowl Light Installation Instructions (PDF)

  • Titan Tools 51503 Mini Tubing Bender
    $14.99
    $19.97
    Product Rating: 5.00 Stars
    Titan Tools 51503 Mini Tubing Bender
    x
                
    • Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees
    • Use with Brass, Copper, Steel, or Aluminum
    • Compact for limited accessibility applications
  • RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    x
                These airline kits work great for your workshop with  applications from  automotive to woodworking. This is a complete  compressed air  distribution system that is designed to easily install within new walls  or on wall surfaces of existing  workshops/garages.  These kits allow  you to put air lines exactly where  you want them, just like electrical  outlets.   No more dragging hoses  across the shop to your work area.    No special tools required, simply push the flexible tubing into the  fittings and put up your system in an afternoon.
    • 1/2" line 
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils

    Kit Includes:  

    • 100 ft. of 1/2" ID Tubing
    • 3 Outlets
    • 1 Manifold
    • 5 Elbows
    • 1 Tee
    • Tools     (air chuck & filter regulator sold separately)

    Airline Installation Manual (PDF)

    RapidAir Maxline Warranty (PDF)

  • 2-1/2 Inch Rear Spring Shackles
    2-1/2 Inch Rear Spring Shackles
    x
                
    • For 2.5" wide leaf springs
    • 1" bushing
    • 2.5" center to center
    • Sold as a pair
  • High Pressure Radiator Cap, 22-24 Lbs
    High Pressure Radiator Cap, 22-24 Lbs
    x
                

    A must have when racing! High pressure cap for radiators raises boiling point of water.

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles

  • Straight Aluminum Hose Connectors, 6 Inch
    Straight Aluminum Hose Connectors, 6 Inch
    x
                

    These 6" long aluminum radiator/coolant hose connectors have a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

    Choose hose diameter (O.D.) needed.

  • Holley 20-132 LS Accessory Drive Bracket-ALT, P/S, A/C
    Holley 20-132 LS Accessory Drive Bracket-ALT, P/S, A/C
    x
                Please view the product's page for more information
            
  • Tru-Shot Rechargeable Liquid Sprayer, Black
    Tru-Shot Rechargeable Liquid Sprayer, Black
    x
                

    Great for use with Mudd-Off, Mud-X, Brake Kleen, penetrating oils or solvent based products. Not for all water based products.

    • One quart capacity
    • Powder coated steel can
    • Adjustable nozzle
    • Works with 80-100 psi
  • Synthetic Chamois
    $4.99
    $9.95
    Synthetic Chamois
    x
                

    Use on cars, furniture, glass, etc. Can be used wet or dry and washed up to 500 times. Big 26" by 19".

     

     

  • Lokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finish
    Lokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finish
    x
                

    This Lokar Floor Mount Emergency Hand Brake features a chrome plated steel e brake handle and is designed after the automotive industry standards. The ratchet cut gear plate and lock are heat treated for strength and safety. Special feature includes 4-point mounting capabilities for floor mount or side mounting for custom applications.

    Comes complete with clevis for installation with Lokar Emergency Brake Cables, Lokar # EC-80FU, Speedway Motors # 491-80FU suggested below. Cables are sold separately.

    Lokar Install Tip:  Every think about mounting the floor mount hand brake sideways in front of your seat?  You can!

  • Panhard Bar Rear Weld-on Kits
    Panhard Bar Rear Weld-on Kits
    x
                

    Use on almost any street rod. Required for coil spring and coil-over rear suspensions. Complete kit includes rod, brackets and 5/8" hardware. Ready to install. 25.5" long.

    916-49022 Instructions (PDF)

  • 1932-1953 Flathead Ford V8 Single Valve Springs
    1932-1953 Flathead Ford V8 Single Valve Springs
    x
                

    Our complete line of valve train parts to help your flathead Ford V8 run on unleaded fuel. These heavy duty single valve springs are made from top-quality chrome silicon steel and are designed to work with stock 1932-1953 Ford retainers. 

    • Recommended for most street performance 1932-53 Ford/Mercury Flathead V8s
    • Chrome silicon material delivers reliable performance
    • Proper seat pressure for most street and street/strip Flathead cams
    • Installed Height:  2.00"
    • Seat Pressure:  85 lbs @ 2.00" installed height

    Note: "Full Race" cams should be paired with our 450-4005 dual valve springs.

    Flathead Valve Assembly (Link)

     

  • Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    x
                Durable, all-steel construction will not warp, fray  or crack. Attractive, scratch  resistant,  baked-on powder coat finish wipes clean for long-lasting  beauty for any  shop or work area. Installation is easy and absolutely no  framework is  required. 
    • 32" tall x 32" wide x 3/4" deep
    • Pack of two
    • Durable and versatile
    • 20 gauge steel with a baked-on rust and scratch resistant finish
    • Slotted to accept Wall Control accessories
    • Holes accept conventional 1/4" peg hooks
    • Choose from blue, grey, red, white, or galvanized steel
  • Dura-Bond FKC-1HP Small Block Chevy Engine Finishing Hardware
    Dura-Bond FKC-1HP Small Block Chevy Engine Finishing Hardware
    x
                

    Kit Includes:

    • (4) Head Dowels
    • (2) Timing Cover Dowles
    • (3) Cam Bolts
    • (1) Cam Lock Plate
    • (2) Oil Filter Adaptor Bolts
    • (1) Long Woodruff Key
    • (2) Short Woodruff Keys
    • (2) Transmission Dowels
  • 1928-29 Dropped Stainless Headlight Bars
    1928-29 Dropped Stainless Headlight Bars
    x
                1928-1929 Dropped style stainless steel headlight bars. Polished. 

    Top width (flange tip to flange tip) 42-1/2"
    Bottom width (flange tip to flange tip) 38-1/2"
  • Longacre Accuset II Scale Kit
    $999.99
    Product Rating: 3.00 Stars
    Longacre Accuset II Scale Kit
    x
                
    • Push one button for all 4 wheel weights plus cross weight
    • Push a second button for all partial %
    • Baseline memory recall
    • Heavy duty red HiFlex cables with billet AN connectors
    • 4 LMF™ swirl finished 15" x 15" low profile pads
    • 1500 lb. per pad capacity, 6000 lb. total
    • 2-year limited warranty
    • Includes FREE scale pad box

    Instructions (PDF)

  • Percy's Speedglass Window Material, 1/8 Inch Thick
    Percy's Speedglass Window Material, 1/8 Inch Thick
    x
                

    This amazing material from Percy's is just the ticket for windshields, side and rear windows. Not to be confused with the more economical plexi-glass, this material allows anyone to cut to fit with common hand tools, but its special coating is scratch and chemical resistant.

    This surface hardened plastic is similar to Lexan, but can be cleaned like normal glass without scratching. You can even use windshield wipers on it and clean it with standard glass cleaners.

    • 50% - 75% lighter than glass (depending on thickness)
    • 1/2 the weight per equal thickness of glass
    • Extremely shatterproof
    • Excellent optical clarity
    • Coated on both sides with a very scratch resistant coating
    • Highly scratch and chemical resistant
    • High resistance to pitting or sand blast effect
    • Can be cleaned with standard glass cleaner, no extra polishes or cleaners needed
    • Excellent water shedding capabilities

    Technical Info (PDF)

    SpeedGlass Instructions (PDF)

  • King Chrome GM One Wire Alternator, 100 Amp
    King Chrome GM One Wire Alternator, 100 Amp
    x
                

    Streamline engine compartment by eliminating excess wires with this 1-wire alternator.  It fit most GM applications and feature a beautiful chrome plated finish.  This one wire alternator simply needs hook up direct to the main battery lead or power source. The internal regulator picks up the available current and kicks the alternator into the charge mode at pre set voltage.

    • 100 amp, one-wire
    • Chrome plated finish
    • Quick, easy hook-up with supplied instructions
    • Attaches to all popular GM alternator brackets
  • Bearing-Seal Kit for Two Mustang II Brake Rotors
    Bearing-Seal Kit for Two Mustang II Brake Rotors
    x
                

    This bearing and seal kit includes two inner wheel bearings, two outer wheel bearings and two inner grease seals. This kit is enough for two brake rotors and is intended to be used with a new rotor installation as this kit does not include the bearing races or cups.

    If your project willl be making use of used rotors, you will require new bearing races or cups.  Therefore you will need to purchase the bearing and seal kit # 910-31052 suggested below in place of kit # 910-31000.

    Works with Mustang II/Pinto and Granada rotors using Mustang II/Pinto spindles only. It will not work for installing Mustang II/Pinto brake rotors on 1949-1954 Chevy spindles. Not for use with early Chevy spindle brake conversion kits.

    -Large Bearing-
    Thickness: .656"
    Upper OD: 1.900"
    Lower OD: 2.150"
    Bearing ID: 1.375"

    -Small Bearing-
    Thickness: .651"
    Upper OD: 1.380"
    Lower OD: 1.570"
    Bearing ID: 0.864"

    Never install new hubs with old bearings.

  • Flathead Lifter Wrench
    $9.99
    Product Rating: 4.25 Stars
    Flathead Lifter Wrench
    x
                

    Use this handy wrench to set your flathead's adjustable lifters.  For use with our 450-F8502 lifters.

  • Rubber GM Transmission Cushion
    Rubber GM Transmission Cushion
    x
                

    OEM-style rubber transmission cushion for many '58-'82 GM transmissions including TH350 auto, Muncie, Saginaw, and others.

    • Meets or exceeds OEM specifications 
    • Rubber formulation provides abrasion resistance and aging stability
    • Tough, hardened steel plate & inserts
    • Chemlock® bonding agent ensures superior rubber-to-metal bond
  • Speed Fast Stainless Safety Wire, .032 Inch
    Speed Fast Stainless Safety Wire, .032 Inch
    x
                Speed Fast 304 stainless steel safety wire. Sold in one pound rolls and comes with a handy belt clip.
            
  • 9 Inch Ford Viton Pinion Seal
    9 Inch Ford Viton Pinion Seal
    x
                

    These Viton 9" Ford rear axle pinion seals are good to over 400° F. Stock rubber seal starts to deteriorate at about 250° F.

  • 1932 Ford Interior Door Escutcheon
    1932 Ford Interior Door Escutcheon
    x
                These are used on both the door handles and window crank handles.
    • Polished stainless steel
    • Inside handle escutcheons for 1932 passenger cars
    • Sold Each
  • Performance Tool W54220 Grease Suction Gun
    Performance Tool W54220 Grease Suction Gun
    x
                Great for filling or emptying rear ends and trannys.  You shouldn't be without one!
            
  • Three-Bolt Carb Base Gasket
    $1.99
    Three-Bolt Carb Base Gasket
    x
                Three bolt carburetor base gaskets fit Stromberg 97-style carbs and Holley 94-style carbs.
            
  • Chevy Front Timing Cover Chrome Bolt Kit
    Chevy Front Timing Cover Chrome Bolt Kit
    x
                Chevy front timing cover chrome bolt kit. 
            
  • Book - The Official 12 Volt Conversion Guide
    Book - The Official 12 Volt Conversion Guide
    x
                This guide book takes you step by step through the formerly terrifying task of converting your hot rod from 6 volt to 12 volts.   

    Includes the secrets to generator and alternator conversion and hook-up, lighting, gauges, ignition, starters, troubleshooting and more. There's even a cross reference from 6 to 12 volt bulbs.

    Twenty pages. Small easy to handle size 8-1/2" x 5-3/8".

Goto Previous PagePrevious Page
1 2 3 4 5 ... 25