Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Streed Rod At Speedway Motors

Want your hot rod to look cool at the show and hot on the street? Speedway Motors has you covered! Whether you’re building a low-buck rat rod roadster, Deuce coupe or fat-fendered sedan, Speedway has thousands of street rod parts, chassis, frames, aluminum radiators, crate engines, accessories, and a variety of professionally engineered street rod kits in stock, ready to ship. Best of all, Speedway's friendly and knowledgeable Techs can help you get the performance hot rod parts you need to get your GM, Chevy, Mopar or Ford car on the road and looking its best.

Featured Products
Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
x
            

These classic "Rams Horn" style exhaust manifolds are great for use with most small block Chevy applications, providing optimal clearance for angle plug heads.  These manifold kits come complete with all mounting hardware and gaskets.

  • Ground smooth with no external bosses or brackets
  • 2-1/2" outlet
  • Plain, Raw finish
  • Nodular cast iron
  • For angle or straight plug heads
  • Includes all hardware and gaskets
Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
x
            

Heavy duty H-beam connecting rods for S/B Chevy. Full floating wrist pin in silicon bronze bushing. Precision bolt bushing to positively locate cap. Features 8640 PCE 7/16" cap screws.

Weight matched sets of 8. Available in 5.7" or 6.0" lengths.

Speedway Economy 12 Circuit Wiring Harness
Speedway Economy 12 Circuit Wiring Harness
x
            

This harness was designed to offer you all the highest quality components in a package designed for cars with minimum accessories. Each wire is color coded and labeled every few inches.

Our prewired 12 circuit kit will fit all your basic needs and makes wiring a painless process. It is designed especially for the street rod without accessories. It also includes horn relay and connector, turn and hazard signals, dimmer switch connector, circuit breaker for headlights, two flashers, one alternator plug, two ignition switch connectors, plus more.

  • Mainfuse box base is 1-7/8" x 3-11/16"
  • Box height is 3-3/4"
12 Circuit Wiring Harness Installation Instructions (PDF)
Speedway Chevy Universal Aluminum Radiators
Speedway Chevy Universal Aluminum Radiators
x
            

Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

  • All-aluminum, furnace-brazed construction
  • No cheap epoxy glue or crimped in gaskets
  • Maximum amount of fins per inch allows greater heat transfer
  • Billet filler necks
  • Available in 22", 24", 28", or 31" widths (measurements include tanks)

Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

Speedway 1928-1948 Ford Forged Spindles w/ King Pins
Speedway 1928-1948 Ford Forged Spindles w/ King Pins
x
            

These Speedway spindles are one piece, drop forged design constructed of high strength 4140 steel, which makes them superior to original components. These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford king pins.

These spindles fit Ford axles from '28-'48. They can be used with period correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from '28-'36.

  • Uses 1937-1941 king pin kit
  • For Ford axles 1928-1948
  • Will not work with 1928-1936 Hubs
  • Includes king pin kit

Be sure to include our spindle nut kit (910616004) to properly install these spindles.

Spindle Identification Guide (GIF)

910-32104 Instructions (PDF)

Ford 9 Inch Posi Traction Third Member Assembly
Ford 9 Inch Posi Traction Third Member Assembly
x
            

Speedway Motors now offers you a 9" Ford street 3rd member for your street rod. We reclaim genuine Ford 9" housings, clean, inspect and install all new components. All bearings, seals, 1310 series yoke and ring & pinion are new!

These Ford 9" 3rd member assemblies feature new Pro Gears ring & pinion, choice of 3.50, 3.70, 3.89, 4.11 or 4.56, Currie 9-Plus limited slip differential, 28 or 31 spline. Shipped in handy plastic carrying case. Assembled by professionals.

 

Currie Differential Tech Bulletin (PDF)

 

910-48345 Instructions (PDF)

Speedys 9 Super 7    Primary 3-Bolt 2 Barrel Carburetor, Plain Finish
Speedys 9 Super 7 Primary 3-Bolt 2 Barrel Carburetor, Plain Finish
x
            

Speedway Motors now offers a reproduction version of one of the most popular carburetors ever used, the original Stromberg 97! Original equipment on '30s and '40s cars and trucks, the Stromberg 97 has long been favored by flathead hot rodders and racers who realized the performance qualities of this timeless fuel supplier.

There have been numerous attempts to reproduce this unit, with little success. "Speedy" Bill Smith of Speedway Motors in Lincoln, Nebraska, took on the challenge to make a great product even better. The 9 Super 7 ® Carb brings this reproduction of the original Stromberg 97 2 barrel carb into the 21st Century!

Speedway Motors has incorporated all of the improvements shown above while maintaining the carburetor's original look. Features such as the choke assembly, accelerator pump, main jets and cosmetics have all been faithfully retained. Additionally, each carburetor is individually flow tested and inspected for leaks. Perfection is the result! 

Aesthetically, the 9Super7 is nearly identical to the stock unit, minus the large 97 logo that appeared on the side and the patent numbers found on the float bowl area. Upgraded internal parts include; the float, needle, and seat. Jetting and power valve settings remain as they were for the original 97 carbs as well as the cfm and vacuum specs.

The other similarity that the 9 Super 7 shares with the original 97 is the setup and tuning necessary to yield a well-running machine. While perhaps not as simple as bolting on a single four-barrel, the 9 Super 7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required is an intake, a linkage system, a Uni-Syn syncing tool, and a little patience. Be sure to include the Secondary 9 Super 7 when installing multi-carb setups. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.

On the primary 9 super 7 carb the throttle shaft extends from carb body .983" and has the hole on the end to pin the linkage. There is a brass sleeve that the throttle shaft rotates in that extends from the carb body .400 and this leaves the useable throttle shaft length of .583. There is sufficient room for progressive linkage and the manual throttle linkage that rotates over the sleeve.

  • All-new tooling for crisp, flawless castings
  • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
  • Stainless steel screws and hardware
  • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
  • Features original Stromberg 0.97" venturi diameter
  • Modern Nitrophyl float and Neoprene gaskets
  • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
  • Will not stick or dribble like the old Viton-tipped needle and seat setups
  • Grose-style jet valve won't corrode in modern fuel, something the original needle and seat units can't do
  • Comes with a No. 65 power valve and 0.045" main jets, identical to the stock 97
  • Extended brass throttle shaft to simplify multi-carb linkage

915-11655 9 Super 7® Carb Instructions (PDF)

Speedway Universal 20 Circuit Wiring Harness
Speedway Universal 20 Circuit Wiring Harness
x
            Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

  • Harness has 20 circuits, of which 18 are fused
  • Taillight leads measure 17' long
  • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

Wiring Harness Installation Instructions (PDF)

"Street Rod" Page 1 of 25

  • Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    New
    Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    x
                

    The Forged Billet Dynalite-M is specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Black Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Powermaster 57297 GM 12SI 150 Amp Smooth Look Alternator, Black
    New
    Powermaster 57297 GM 12SI 150 Amp Smooth Look Alternator, Black
    x
                Please view the product's page for more information
            
  • Sway Bar End Link Kit, 5 Inch
    $11.99
    $18.99
    New
    Sway Bar End Link Kit, 5 Inch
    x
                

    These sway bar end link kits come with all necessary hardware for a successful installation. They are designed with durable polyurethane bushings and steel material so you know that you are getting a quality kit.

    • Sold as Kit
    • 5" bushing to bushing working length, 8" overall length
    • Polyurethane Bushings
    • Hardware Included

     


  • EMPI 16-2059 Bullet Light Assembly, Convex Red, Each
    New
    EMPI 16-2059 Bullet Light Assembly, Convex Red, Each
    x
                

    EMPI Bullet lights feature a high power 12-Volt 50 watt halogen bulb with a mirror finish reflector. The compact (approximately 3-1/2" tall by 2-1/2" diameter) housing is made of precision machined aluminum.

    • Bullet Light w/ Red Lens
    • Precision machined aluminum housing
    • Mounts on flat or slightly rounded surfaces
    • Sold Each

  • LS Air Block Off Plate
    $9.99
    $14.99
    New
    LS Air Block Off Plate
    x
                

    These air block-off plates are intended for use on non-pollution controlled, off-road vehicles only.

    • For GM LS engines
    • Hardware and O-ring are included
    • Measures 1-1/2" center-to-center on bolt holes

     

  • Titan Tools 19436 8-Piece Air Hose Blow Gun Kit
    New
    Titan Tools 19436 8-Piece Air Hose Blow Gun Kit
    x
                

    This 8-piece air hose blow gun kit from Titan Tools comes with a blow gun handle as well as 7 tips to go along with it.  These kits feature 1/4" NPT female fittings.

    Kit includes:

    • (1) Blow gun
    • (1) Rubber tip
    • (1) Air screen tip
    • (1) Brass tip
    • (1) Safety tip
    • (1) Adjustable tip
    • (1) Nylon tip
    • (1) Safety booster tip
  • Wilwood 260-13618 Compact Remote Flange Mount Master Cylinder Kit, 5/8 Inch Bore
    New
    Wilwood 260-13618 Compact Remote Flange Mount Master Cylinder Kit, 5/8 Inch Bore
    x
                Please view the product's page for more information
            
  • Wilwood 260-13622 Compact Remote Flange Mount Master Cylinder Kit, 1 Inch Bore
    New
    Wilwood 260-13622 Compact Remote Flange Mount Master Cylinder Kit, 1 Inch Bore
    x
                Please view the product's page for more information
            
  • Replacement 12 Volt Vintage Style Fog Light Bulb, Amber Lens
    New
    Replacement 12 Volt Vintage Style Fog Light Bulb, Amber Lens
    x
                

    These vintage style fog lights are replacement for our fog light assemblies (91130653, 91130654, 911364007, and 911364008).  They feature an amber lens, and are perfect for your vintage street rod or custom ride.

    • Replacement for our 12 volt fog light assemblies
    • Amber lens
    • Vintage Lens Pattern Design From the 1940's
    • Quartz Halogen with Replaceable H3 Bulb, 35 Watt

     

  • Long Coil-Over Shock Mount Support
    From: $18.99
    New
    Long Coil-Over Shock Mount Support
    x
                

    Speedway sells the ONLY fully engineered shock mount. The 5/8" forged button head bolt looks good while offering maximum support.  The 1-3/4" x 1-3/4" billet aluminum support spacer has internal threads. This allows you to properly support this shock without crushing the bushing like others do, which leads to shock failures. There's a reason major chassis builders use this mount.

    • Billet aluminum
    • 5/8"-24 x 6" forged button head bolt
    • 5/8"-18 nylon locking nut
    • 6" from base of head to end of threads
    • 1-1/4" shock mount base
    • 1.5 O.D., .650" I.D. flat washer
    • Safely mounts to brackets 1/2" thick
    • Includes required washers, nylon lock nut, and longer mount bolt
    • Uses a 3/8" Allen head wrench for holding it while tightening
    • Mount kits sold individually
    • Sold as Each (1)

    916-36011 Instructions (PDF)

     

  • Wilwood 120-13529-RD Forged Dynalite-M Disc Brake Caliper, Red
    New
    Wilwood 120-13529-RD Forged Dynalite-M Disc Brake Caliper, Red
    x
                

    The Forged Billet Dynalite-M is further enhancement of the venerable Forged Dynalite series calipers. Specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Red Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Ram Clutches 03-004 Ford Clutch Disc Alignment Tool, Steel, 1-1/16-10 Inch
    New
    Ram Clutches 03-004 Ford Clutch Disc Alignment Tool, Steel, 1-1/16-10 Inch
    x
                

    With RAM's 1040 steel alignment tools, you can now get perfect disc alignment for your clutch install without the inaccuracies of plastic alignment tools.  These tools are perfect for installations such as dual discs that are even more critical for proper setup.

    • 1.06" Input Shaft Diameter
    • Input Shaft Spline Count: 10
    • Steel Material Type
    • Sold Individually
  • Titan Tools 21092 19MM Non-Marring Deep Well Lug Nut Socket, 1/2 Inch Drive
    New
    Titan Tools 21092 19MM Non-Marring Deep Well Lug Nut Socket, 1/2 Inch Drive
    x
                

    These non-marring deep well lug nut sockets from Titan Tools are available with core and sleeve in a 19MM size.  They are for use with 1/2" drive ratchet wrenches.

    • Protects wheel from damage
    • 19MM / 1/2" drive
    • Non-Marring
    • Deep Well style
  • Seal for Spindle Mount Radir Wheels
    $4.99
    $9.99
    New
    Seal for Spindle Mount Radir Wheels
    x
                These are part of a spindle bearing and seal kit. They are an inner bearing seal designed for use with Ford spindle mount Radir wheels.   
    • Sold each
    • Inner Bearing Seal
    • Ford Spindle Mount-Radir Wheels
    • See also 706-1300 for kit with seals and bearings
  • Turn Signal Switch for Speedway Tilt Steering Columns
    New
    Turn Signal Switch for Speedway Tilt Steering Columns
    x
                

    This is a replacement turn signal switch assembly for Speedway tilt steering columns. It fits most GM '69-up and aftermarket tilt columns.

    Includes:

    • Complete pigtail
    • Hazard knob and spring
    • Adapter for earlier GM vehicle connection
  • G-Comp Suspension Replacement Bump Stops, Black
    New
    G-Comp Suspension Replacement Bump Stops, Black
    x
                

    These black polyurethane bump stops are replacement for Speedway G-Comp suspension components and packages.  Sold as a pair, they come with mounting stud bolt and nut included.

    • Replacement for G-Comp suspension
    • Black polyurethane
    • Sold as a pair
  • Posies 2035 Super Slide Leaf Spring, 41-3/8 Inch, Reverse Eye
    New
    Posies 2035 Super Slide Leaf Spring, 41-3/8 Inch, Reverse Eye
    x
                Please view the product's page for more information
            
  • Ram Clutches 78125HD Heavy Duty Chevy Hydraulic Release Bearing Kit
    New
    Ram Clutches 78125HD Heavy Duty Chevy Hydraulic Release Bearing Kit
    x
                

    These hydraulic clutch release bearings are offered in new HD versions to offer the upmost in durability and long life over factory hydraulic systems. Full adjustability means easy setup with any aftermarket clutch, single or dual disc.

    • Compressed Length: 1.75"
    • Travel: .70"
    • Inlet Fitting: -3 AN
    • Sold Individually
  • Titan Tools 19424 Spot Spray Non-Aerosol Sprayer, Blue
    New
    Titan Tools 19424 Spot Spray Non-Aerosol Sprayer, Blue
    x
                
    These spot sprayers from Titan Tools are eco friendly and are not for use with paint or flammable propellants.  They feature a 1 quart capacity and are refillable.
    • 80-150 PSI operating pressure
    • Refillable
    • Not for use with paint products
    • Do not use with flammable propellants
    • Eco friendly
    • Blue powder coat finish
  • Powermaster PowerGEN 82155-2 90A 56-57 Ford T-Bird 12 V Generator, Blk
    New
    Powermaster PowerGEN 82155-2 90A 56-57 Ford T-Bird 12 V Generator, Blk
    x
                Please view the product's page for more information
            
  • Ram Clutches 03-001 GM Clutch Disc Alignment Tool, Steel, 1/8-10 Inch
    New
    Ram Clutches 03-001 GM Clutch Disc Alignment Tool, Steel, 1/8-10 Inch
    x
                

    With RAM's 1040 steel alignment tools, you can now get perfect disc alignment for your clutch install without the inaccuracies of plastic alignment.

    • Input Shaft Diameter: 1.13"
    • Input Shaft Spline Count: 10
    • Steel Material
    • Sold Individually
  • Stainless Steel Tear Drop 12 Volt Fog Light, Amber Lens
    New
    Stainless Steel Tear Drop 12 Volt Fog Light, Amber Lens
    x
                These tear drop style fog lights feature a beautiful stainless steel housing with  an Amber lens.  They also include adjustable mounting and a replaceable  H3 35 watt bulb, and are perfect for your vintage street rod or custom  ride. 
    • Stainless steel Housing With Universal Ball & Cup Adjustable Mounting
    • Quartz Halogen with Replaceable H3 Bulb, 35 Watt
  • Titan Tool 51505 3-Piece Stainless Steel, Brass, and Nylon Brush Set
    New
    Titan Tool 51505 3-Piece Stainless Steel, Brass, and Nylon Brush Set
    x
                

    These 3-piece brush sets include three different style brushes for use in your home, shop, or garage. 

    • Stainless steel, Brass, Nylon
    • Great for multi-purpose use
  • Short Finned Small Block Chevy Valve Covers w/Holes
    New
    Short Finned Small Block Chevy Valve Covers w/Holes
    x
                

    These valve covers not only look cool, they feature a short design and work with Small Block Chevy engines.  Finned with aluminum construction keeps these valve covers lightweight.

    • Short style
    • Finned design
    • Aluminum construction
    • Fits Small Block Chevy V8 engines
    • Includes hardware, baffles, and grommets
  • Rocket Racing Wheels Fire Wheel, 16 x 5, 5 on 4.5, 2.375 Inch Backspace
    New
    Rocket Racing Wheels Fire Wheel, 16 x 5, 5 on 4.5, 2.375 Inch Backspace
    x
                Please view the product's page for more information
            
  • Titan Tools 19450 Portable Sand Blaster
    New
    Titan Tools 19450 Portable Sand Blaster
    x
                

    This sand blaster from Titan Tools has a gravity feed for constant flow of blasting materials. It has a capacity of 50 pounds and an operating pressure of 90 psi.

    • Hopper aluminum blast gun 15 material hose
    • Air inlet: 1/4" NPT
    • Nozzle size: 3/16"
    • Minimum air requirement: 3.5 CFM at 50 psi
    • Compatible with any abrasive: silica, sand, steel, grit, glass beads, and pecan shells
  • Powermaster PowerGEN 82111-2 90A GM Short Black 12 Volt Generator
    New
    Powermaster PowerGEN 82111-2 90A GM Short Black 12 Volt Generator
    x
                Please view the product's page for more information
            
  • Heidts SB-006 Mustang II Front Stabilizer Sway Bar Kit for 1941-48 Ford
    New
    Heidts SB-006 Mustang II Front Stabilizer Sway Bar Kit for 1941-48 Ford
    x
                
    These front sway bar kits from Heidts are the best quality suspension components on the market. They come complete with everything you need for a painless installation.
    • For 1941-48 Ford passenger cars
    • Mustang II I.F.S.
    • Includes urethane mount and end-link bushings
    • Hardware included
  • FK Rod Ends ALJML3 10-32 LH Male Aluminum Heim Joints
    New
    FK Rod Ends ALJML3 10-32 LH Male Aluminum Heim Joints
    x
                
    FK Rod Ends offers this three piece male heim. The ball is made of 52100 steel that is heat treated and hard chrome plated. The body is made of aluminum and is hard anodized red. The race is heat treated steel alloy that has been zinc plated and chromate treated.
    • Aluminum 3 piece LH 10-32 heim male
    • Ball is 52100 steel, heat treated and hard chrome plated
    • Body is 7075-T6 aluminum, hard anodized red
    • Race is alloy steel, heat treated, zinc plated, chromate treated

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Male Rod End Chart (JPG)

     

  • Wilwood 260-3278 Residual Pressure Valve with Fittings
    New
    Wilwood 260-3278 Residual Pressure Valve with Fittings
    x
                
    These in-line pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in disc brake systems. Residual pressure valves are made from billet aluminum with 1/8" npt female threads for the inlet/outlet and color coded for easy identification. Ideal for drag racing, circle track, street rod and many off road applications.

    The two pound valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration, thereby causing excessive caliper piston retraction and a longer brake pedal stroke. The minimal two pound residual pressure prevents fluid from flowing back without causing the brakes to drag.

    • Inlet Size: 1/8-27 NPT
    • Inlet Fit: 3/8-24 IF Female
    • Outlet Size: 1/8-27 NPT 
    • Outlet Fit: 3/8-24 IF Female
    • Rate: 2 lbs.

    Instructions (PDF)

    Brake System Builder's Tip (Link)

    Learn more about the proper uses of residual valves by reading our tech article. Brake System Selection

  • Replacement Bushings for Mustang II Upper Control Arms
    New
    Replacement Bushings for Mustang II Upper Control Arms
    x
                

    These are replacement bushings for our tubular, MII upper control arms. Bushings are constructed of quality rubber for durability.

    • Overall Length: 1.66"
    • Inside Diameter: .65"
    • Outside Diameter: 1.20"
    • Sold in pairs
  • Chrome Bullet Style Hub Covers, 5 on 5 Inch
    New
    Chrome Bullet Style Hub Covers, 5 on 5 Inch
    x
                

    These bullet hub/nut covers work great on most steel wheels to give you that cool retro look.  They feature chrome steel construction and are sold as a set of four.

    • Chrome plated steel
    • 5 on 5" bolt patterns
    • Sold as a set of (4)four
  • Wilwood 160-13500 GT 48 Curved Vane Spec-37 LH Iron Rotor, 11.75 Inch
    New
    Wilwood 160-13500 GT 48 Curved Vane Spec-37 LH Iron Rotor, 11.75 Inch
    x
                

    Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with the proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.

    • Spec-37 Iron
    • 10.4 Pounds
    • Width: 1.21 Inch
    • Diameter: 11.75 Inch
    • Mount Side: LH
    • Vane Count: 48 CV
    • Type: GT
    • Style: GT Slotted
    • Surface Finish: Plain
    • Balanced
    • Suitable for high temperature racing to street use

    Notes:

    Proper Break-In Procedure for Steel or Cast Iron Rotors

    New steel/iron rotors should be bedded in before being used in racing conditions. Proper bedding will prepare the rotor surface, prolong the rotor's life, and make it more

  • ARP 254-4113 Ford N351 Cylinder Head Stud Kit, 1/2 Inch
    New
    ARP 254-4113 Ford N351 Cylinder Head Stud Kit, 1/2 Inch
    x
                

    These ARP head studs are for the 351W block application when using Ford 351N Pro Series cylinder heads. They are a special 1/2" size and feature a 200,000 psi rating.  

    • For use on Ford N351 Pro Series heads with a 351W block
    • 1/2" hex head
    • 200,000 psi rated
    • Heat-treated and cold forged
    • Kit includes hardened parallel washers
  • Universal Long Fiberglass Floor Mount Console
    New
    Universal Long Fiberglass Floor Mount Console
    x
                With these do-it-yourself interior components there's no limit to the   creative uses you'll find! These fiberglass floor consoles allow you   to customize your street rod's interior to suit your style. 
    • Fiberglass construction
    • Long design floor mount console
    • Can be painted, carpeted or upholstered
    • 33.25" long x 8.5" wide x 6" tall
    • Black gel coat
    • Trim this flat bottomed console to custom fit your application
  • TCI Automotive 302820 EZ-TCU GM Overdrive Transmission Control Kit
    New
    TCI Automotive 302820 EZ-TCU GM Overdrive Transmission Control Kit
    x
                Please view the product's page for more information
            
  • GM Aluminum 14 Inch Carbon Fiber Steering Wheel Dress Up Kit
    New
    GM Aluminum 14 Inch Carbon Fiber Steering Wheel Dress Up Kit
    x
                

    These steering wheel dress-up kits are designed for use with 14" diameter steering wheels and 1967-1994 GM style steering columns.  They feature a hydrographic carbon fiber design and come with everything needed to make your steering wheel one-of-a-kind.

    Kit includes:

    • 14 inch carbon fiber hydrographic half wrap
    • Billet aluminum horn button 
      • Plated billet aluminum
      • Fits our 9 billet bolt steering wheel setups
      • Presses into steering wheel adapter
      • Carbon fiber hydrographic design, smooth finish
      • Mounting pattern: 9 hole. Diameter: 4-5/8"
    • Carbon fiber hydrographic billet aluminum steering wheel adapter
      • Fits our billet 9 bolt steering wheel setups
      • Mounting pattern: 9 hole
      • Diameter: 3-1/4"
  • Wilwood 260-13619 Compact Remote Flange Mount Master Cylinder Kit, 3/4 Inch Bore
    New
    Wilwood 260-13619 Compact Remote Flange Mount Master Cylinder Kit, 3/4 Inch Bore
    x
                Please view the product's page for more information
            
  • Afco 8000044402 Universal Dual Cooling Fan Wire Harness, 40 Amp Relays
    New
    Afco 8000044402 Universal Dual Cooling Fan Wire Harness, 40 Amp Relays
    x
                These heavy duty dual fans wire harness kits from Afco are designed  as a universal kit for positive or negative controlled units.  They  feature 40 amp relays, heavy gauge wiring, and all connectors needed.
    • Hardware included
    • Color installation instructions included
    • 40 amp relays
    • Positive or Negative controlled
    • Universal for dual cooling fans
    • Temp switch sold seperately
  • Wilwood 160-13498 HD 48 Curved Vane Spec-37 LH Iron Rotor, 11.75 Inch
    New
    Wilwood 160-13498 HD 48 Curved Vane Spec-37 LH Iron Rotor, 11.75 Inch
    x
                

    Wilwood's HD 48 Curved Vane Spec-37 rotors are are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. The HD Series preparation includes full detail machining and smooth pad contact faces without slots.

    • Width: 1.21 Inches
    • Diameter: 11.75 Inches
    • Spec-37 Iron
    • 10.4 Pounds
    • Mount Side: LH
    • Vane Count: 48 CV
    • Style: Plain Face
    • Surface Finish: Plain
    • Type: HD Heavy Duty
    • Suitable for high temperature racing to street use

    Notes:

    Proper Break-In Procedure for Steel or Cast Iron Rotors

    New steel/iron rotors should be bedded in before being used in racing conditions. Proper bedding will prepare the rotor surface, prolong the rotor's life, and make it more resistant to thermal checking or cracking under severe braking conditions. The following procedures should be performed when bedding in both steel and cast iron rotors. It is best

Goto Previous PagePrevious Page
1 2 3 4 5 ... 25