Want your hot rod to look cool at the show and hot on the street? Speedway Motors has you covered! Whether you’re building a low-buck rat rod roadster, Deuce coupe or fat-fendered sedan, Speedway has thousands of street rod parts, chassis, frames, aluminum radiators, crate engines, accessories, and a variety of professionally engineered street rod kits in stock, ready to ship. Best of all, Speedway's friendly and knowledgeable Techs can help you get the performance hot rod parts you need to get your GM, Chevy, Mopar or Ford car on the road and looking its best.
This harness was designed to offer you all the highest quality components in a package designed for cars with minimum accessories. Each wire is color coded and labeled every few inches.
Our prewired 12 circuit kit will fit all your basic needs and makes wiring a painless process. It is designed especially for the street rod without accessories. It also includes horn relay and connector, turn and hazard signals, dimmer switch connector, circuit breaker for headlights, two flashers, one alternator plug, two ignition switch connectors, plus more.
- Mainfuse box base is 1-7/8" x 3-11/16"
- Box height is 3-3/4"
Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.
These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.
- All-aluminum, furnace-brazed construction
- No cheap epoxy glue or crimped in gaskets
- Maximum amount of fins per inch allows greater heat transfer
- Billet filler necks
- Available in 22", 24", 28", or 31" widths (measurements include tanks)
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.
Designed for a clean and simple install onto Model T, Model A, and 1932 Ford frame. The included 1" bore remanufactured master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The outlet ports are 3/8"-24 IFF. The bracket can be bolted or welded to the left frame rail (boxed or stock).
Kit includes a dual feed master cylinder, frame bracket, and a steel pedal arm w/ pad that can be easily modified for driver comfort.
Note: Will NOT work in conjunction with the factory clutch pedal. Intended for use with an Automatic Transmission.
916-31926 Instructions (PDF)
Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.
These Speedway spindles are one piece, drop forged design constructed of high strength 4140 steel, which makes them superior to original components. These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford king pins.
These spindles fit Ford axles from '28-'48. They can be used with period correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from '28-'36.
- Uses 1937-1941 king pin kit
- For Ford axles 1928-1948
- Will not work with 1928-1936 Hubs
- Includes king pin kit
Be sure to include our spindle nut kit (910616004) to properly install these spindles.
910-32104 Instructions (PDF)
Speedway Motors now offers you a 9" Ford street 3rd member for your street rod. We reclaim genuine Ford 9" housings, clean, inspect and install all new components. All bearings, seals, 1310 series yoke and ring & pinion are new!
These Ford 9" 3rd member assemblies feature new Pro Gears ring & pinion, choice of 3.50, 3.70, 3.89, 4.11 or 4.56, Currie 9-Plus limited slip differential, 28 or 31 spline. Shipped in handy plastic carrying case. Assembled by professionals.
910-48345 Instructions (PDF)
Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car spindles. No machine work needed. Please see below for suggested 1973-77 GM type 11" brake rotor part #'s required.
- GM to Ford brake brackets
- 1978-Up hardware
- Bearing and seal adapters
- Inner bearing cups
- Inner bearing cones
- Does not include dust caps, washers or spindle nuts
This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for Street Rods based on 1932-48 Fords. However, for or a T bucket or early roadster, you might consider the Wilwood kits shown below.
702-4475 Instructions (PDF)
Speedway Motors makes it easy to bolt together a cross steering system with our Vega Steering Box Combo kit. Kit includes a Speedway Vega box, steel pitman arm, and a Ford Model T - 1934 frame mount. This steering box accepts a 5/8" 36-spline U-joint or coupler.
- Speedway Vega Steering Box
- 20:1 steering ratio
- 5 turns lock-to-lock
- Steel Vega Pitman Steering Arm
- Plain finish
- Non-offset design
- Double-tapered "Ford" tie rod end hole (lets you attach the drag link on the top or on the bottom)
- Vega Steering Box Mount
- Fits Model T thru 1934 Ford frames
- Weld-on design
Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H fuse block holds 18 standard push-in fuses and can be mounted almost anywhere.
Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.
- Harness has 20 circuits, of which 18 are fused
- Taillight leads measure 17' long
- Includes plug for GM column, headlight switch, dimmer switch, and signal flashers
"Street Rod" Page 1 of 25
$79.99$82.25More InfoKing HP Series 1969-Up Small Block Chevy Rod Bearingsx
- Bi-metal aluminum silicon alloy featuring fine micro-bore finish
- Mains and rods are narrowed for large radius crankshafts
- Greater rod bearing height improves bearing-to-bore contact/heat transfer and reduces spin potential at high RPM
- 0.015" thick top layer for superior macro particle embedability and conformability
- 40 Vickers hardness to resist overlay migration and extrusion
- 450°F heat threshold for superior protection against friction and overheating
$29.99More InfoSpeedway Fuel Level Gauge with Sender, 2-1/16 Inchx
These fuel level gauge/sender kits feature a domed lens and a stainless steel bezel and a backlit white face. The fuel sender comes with seal and and all mounting hardware.
- Overall Diameter: 2.25"
- Overall Length: 9.25"
- Includes sender
- 240 ohms empty, 33 ohms full
- Stainless steel bezel
- Backlit white face
Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.
$18.99$20.99More InfoAERO Appearance Products 5602 Finale Multi Surface Cleanerx
To keep your car in “Showroom” condition between washes, FINALE was developed for those of us who like that fresh, clean feel of having the perfect car. Used by Pilots, Flight Attendants and Flight Crews around the globe, FINALE has built a reputation over the years for keeping VIP aircraft in such a state.
Water spots, streaks and undesirable dust between washes are a thing of the past once you use FINALE on your automobile. Formulated for both interior and exterior surfaces, FINALE is an imperative step for every regular maintenance detail and in between FINALE allows your car to maintain that shine and luster of a newly waxed car between waxes. Its lubricating agents encapsulate dirt and grime allowing fragile surfaces on your car, such as paint, to be safe from scratches.
Not only does FINALE add a desirable shine and polished look to your car, but it also places a thin, protective barrier between your car and the elements.
$759.99$799.95More InfoAeromotive 18664 Stealth Fuel Cell, 15 Gallonx
Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.
- Includes Stealth 340 LPH in-tank fuel pump
- Works with both carbureted and EFI systems
- Return line provisions
- Two AN8 vents with rollover valves
- Universal 0-90 Ohm fuel level sender
- Standard 12-bolt flush mount lid assembly
- Natural aluminum finish
- Ready to go simple installation
Fuel Pump Flow Chart (GIF)
$174.99$179.95More InfoAeromotive 11140 340 Stealth Fuel Pump, Centered Inletx
The Aeromotive 340 Stealth Fuel Pump is a high-output, in-tank, electric fuel pump that fits most popular EFI applications. It is a compact, lightweight pump that bolts into many existing hanger assemblies.
What sets the 340 Stealth Pump apart is its superior flow throughout a wide pressure range. Compared to other popular aftermarket pumps, at 40 psi the 340 boasts more than 340 lph. That’s over 30% more flow, making it ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the OE configuration. The 340 is also perfect for use as a universal replacement for applications that require more flow to support forced air power adders such as turbo and supercharged applications.
- Fits most vehicles where popular aftermarket pumps are applicable
- Designed for in-tank use only
- Can be used in carbureted or EFI applications
- Turbine pump mechanism increases durability and can be used in pulse modulated applications
910-11140 Instructions (PDF)
$3.99More InfoTrans-Dapt 4961 B/B Chevy Chrome Timing Tab for 8 Inch Balancerx
These Trans-Dapt chrome finished steel timing tabs fit 1965-1990 Big Block Chevy 396-454 with 8" balancer.
$10.99$14.99More InfoCON2R 7-002 Chrome Wing Nut, 1/4-20 Thread, 2-1/4 Across, 1-1/2 Tallx
This wing nut is for-sure an attention getter. Perfect topper for the air cleaner on a big four barrel, on top of your tri-power pots or an accent piece wherever you need it.
$6.99$7.99More InfoSpeedway Extreme Gaskets, 2-1/2 Inch Collector Gasketsx
- Reusable triple-layer gasket
- Stainless steel with a heat-resistant, rubber-based inner core
- 0.085” thick, ultra pliable
- Easily conforms to surface irregularities to create a tight, leak-proof seal
FlatStoppers were developed as a solution for people having problems with tires developing flat spots when a vehicle is parked for 30 days or longer. Once tires are set on FlatStoppers (on a level surface), they settle into the pad's concave depression, which helps support more of
the tire. This disperses the weight of the car more evenly onto the tire - helping to prevent any flat spotting. The pads measure 22.3" long x 3.5" high x 14" wide, and will accommodate tires up to 12" wide.
FlatStoppers will not conduct heat or cold into your tires despite changing floor temperatures.
Flatstoppers are made with the company's patented super-lightweight 100% solid construction technique - making them highly durable, virtually indestructible, and providing a 6,000 lb. vehicle weight capacity. FlatStoppers' textured coating prevents sliding across floors - including epoxy-coated floors and RaceDeck.
FlatStoppers won't scratch or otherwise damage floors, and won't rust.
$14.99$19.97More InfoTitan Tools 51503 Mini Tubing Benderx
- Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees
- Use with Brass, Copper, Steel, or Aluminum
- Compact for limited accessibility applications
$30.99More InfoSpeedway Classic 12 Inch Black Steering Wheel w/ Holesx
Smooth black cushion with chrome spokes. Has the common 3 bolt pattern mount. Wheels feature rubber steering wheel grip. Chrome center cap is included.
- Smooth black cushion
- 3 bolt pattern mount
- Chrome cap included
Note: These steering wheels require addtional purchase of a horn button retainer, not included with steering wheel. We offer our corresponding retainer (41010112) and various adapter kits for your specific application.
Fuel Pump Push Rod Bushing for 1949-53 Ford and Mercury Flathead V8x
These fuel pump push rod bushings for 1949-1953 Ford & Mercury Flathead V8 are 1-9/16" long. They work perfect with our push rod (56052662).
- Fuel pump push rod bushing
- For 1949-1953 Ford & Mercury Flathead V-8
- 1-9/16" long
- For push rod (56052662)
$6.99$7.49More InfoLucas Air Tool Lubricant, 1 Pintx
Long lasting and super slick - allows tools to run easier and much longer. Two ounce Tool Box Buddy is exactly as the name implies - this is a superior lubricant packaged for the tool box.
Lucas Air Tool Lubricant is a unique formula that was developed for the working professional who demands top performance. It combats rust and varnish and coats the working parts with a cushion of waterproof lubricants that resist blowout. That means it lubes the tool and not the floor.
- Extends tool life
- Protects under extreme operating temperatures
- Disperses water
- Resists blowout
$24.99More Info2-1/2 Inch Rear Spring Shacklesx
- For 2.5" wide leaf springs
- 1" bushing
- 2.5" center to center
- Sold as a pair
$7.99More Info3/8 X 3/8 Clevisx
The correct clevis for mounting our rack and pinion units (668-0105 & 668-0115).
$5.99More InfoSwindell Series Sprint Car Set-Up Sheetsx
- Can be used if running a 305, 360 or 410 sprint car
- 1 tablet contains 50 sheets
- Easily organize your set-up notes for each race
- Gives you a permanent record of every adjustment and set-up
- Designed and used by World of Outlaw and Chili Bowl Champion Sammy Swindell
$419.99More InfoHolley 302-1 LS Series Retro-fit Oil Panx
GM's popular LS engines are finding their way into a large variety of vehicles. They make great power, plus they're very durable and reliable. Unfortunately, the factory LS pans don't always fit or they hang too low for today's hot rods. Holley's new LS Retro–fit Engine Oil Pan is designed to help! It provides maximum clearance to the chassis and ground, plus provides an OEM fitment for durability and proper sealing.
- Provides OEM fitment– OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity and OEM bell-housing attachments
- Traditional high-quality cast aluminum appearance with clean exterior styling
- Provides maximum clearance to chassis
- Cast and machined aluminum
- Complete kit including sump baffle, pick-up tube, sump plug & oil filter stud
- Fits GM rear wheel drive applications that were originally equipped with a Small Block or Big Block Chevy engine and traditional rear sump oil pan*
Specs Chart (GIF)
$4.99More InfoSpeedway Tire Coaster Setx
- Made from 100% recycled tire rubber
- Set of four
- Four distinct designs in each set
- Vintage Sprint Mag
- Kustom Cross-bar Flipper Cap
- D-hole Stock Car Wheel
- Redline 5 Spoke Mag
$69.99More InfoFlathead 9 Inch Clutch Disc, 1-3/8 Inch 10-Splinex
It's getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 9" clutch discs for the flathead V8.
These premium organic clutch friction discs are for use with flathead Ford V8 and work well with our long style pressure plate (part number 91015651).
Flathead 9 Inch Clutch Disc
- 1-3/8 Inch 10-Spline
- Early Ford Applications
T-5 and Adapter Tech Tips (Link)
$22.99More InfoQA1 COM8T-102PK 1 Inch Bearing Kitx
- (2) Steel Spherical Bearings
- 0.5" I.D.
- 1.0" O.D.
- 1.0" Wide
- (4) Snap Rings
- (2) Steel Spherical Bearings
$18.99$19.99More InfoLimited Ed. George Trosley Print - Still Crankinx
Our friend George Trosley has agreed to sharpen his pencil and sign a limited number of his most famous art prints just for you. Limited quantities available. 11" x 17" unless otherwise noted.
$324.99More InfoBare 60 Inch Centered 9 Inch Ford Housingx
Our economical 9" Ford rear axle housing features a reclaimed center section, new 3" axle tubes, and new-style Ford ends. Total track width is 60" from hub-to-hub. You will need one 28-3/8" long axle and one 30-5/8" long axle. Includes 8 T-bolts for the axle bearing retainer plates and 10 studs for the 3rd member.
Third member sold separately.
$239.99More InfoDeluxe 45 Degree Brake Flaring Toolx
- Easily form 45-degree double, single and bubble flares in OE steel, stainless steel and soft metal tubing
- For use with 3/16"-, 1/4"-, 5/16"- and 3/8"-diameter lines
- Turret-style design allows you to make those precision flares in minimal time
- All the brake-flaring forming dies you need are mounted right on the turret
- T-handle screw clamp securely holds your line in place during forming
- Packaged in a blow-molded case
Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.
$399.99More InfoDougs Headers DEC300A Stainless Steel Electric Exhaust Cut-Outs-3 Inchx
These rugged Doug's Headers electric exhaust cutouts allow you to convert to a wide-open, unobstructed exhaust system with the flip of a dash-mounted switch. Doug's electric exhaust cutouts are built to last; they feature full stainless steel construction with a heavy-duty Dayton gear reduction rack and pinion electric drive mechanism. Best of all, these cutouts use a self-cleaning, knife-edge seat for a leakproof seal every time, whether open or closed. Doug's Headers electric exhaust cutouts include a pre-wired harness, a toggle switch, and fuses for an easy installation.
- 3.000 in.
- Stainless steel
- Sold as a pair
- Includes wiring harness
Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage Systemx
Durable, all-steel construction will not warp, fray or crack. Attractive, scratch resistant, baked-on powder coat finish wipes clean for long-lasting beauty for any shop or work area. Installation is easy and absolutely no framework is required.
- 32" tall x 32" wide x 3/4" deep
- Pack of two
- Durable and versatile
- 20 gauge steel with a baked-on rust and scratch resistant finish
- Slotted to accept Wall Control accessories
- Holes accept conventional 1/4" peg hooks
- Choose from blue, grey, red, white, or galvanized steel
$69.99More InfoSpeedway Electric Speedometer, 3-3/8 Inch Diameterx
These electric speedometers are perfect for your rod or race project. They feature a white face with bold black lettering and a bright orange needle for quick monitoring. Our 0-160 mph speedometers also come with a stainless steel bezel and a complete installation kit.
- 3-3/8” body diameter
- 3-3/4 ” bezel
- Overall Diameter: 3-3/4"
- Body Length: 1.60"
- Stud Length: 1.00"
- Backlit white face with black lettering
- Orange needle
- 0-160 mph range
- Stainless steel bezel
- Includes installation kit
- SENDER NOT Included
$14.99$19.99More InfoDura-Bond FKC-1HP Small Block Chevy Engine Finishing Hardwarex
- (4) Head Dowels
- (2) Timing Cover Dowles
- (3) Cam Bolts
- (1) Cam Lock Plate
- (2) Oil Filter Adaptor Bolts
- (1) Long Woodruff Key
- (2) Short Woodruff Keys
- (2) Transmission Dowels
$279.99$299.99More Info1934 Ford Car Bumperx
- Fits both front and rear
- 26 inches between bolts
$999.99More InfoLongacre Accuset II Scale Kitx
- Push one button for all 4 wheel weights plus cross weight
- Push a second button for all partial %
- Baseline memory recall
- Heavy duty red HiFlex cables with billet AN connectors
- 4 LMF™ swirl finished 15" x 15" low profile pads
- 1500 lb. per pad capacity, 6000 lb. total
- 2-year limited warranty
- Includes FREE scale pad box
- Push one button for all 4 wheel weights plus cross weight
$224.99More InfoOTB Gear 6870 Finned Cover For Round Back 9 Inch Rearend, Polishedx
The perfect cure for the boring pumpkin. The sturdy and popular Ford 9" rearend needs a little work to look stylish... at least thats what we thought. This new cover is cast in A356 aircraft grade alloy and available in a highly polished finish. No hardware is needed to attach - we provide a generous supply of high temperature adhesive (600 degree).
- Excellent compliment to the new & improved Speedway 9" housing (910-46100)
- Will fit most factory 9" Ford rear axle housings that have a bulge on the back of the housing for the ring gear, such as our axle # 910-46100 and other similar rear housings
- No hardware is needed to attach
- Generous supply of high temperature adhesive (600 degree) included
- Can be powder coated after assembly
- Will not fit Currie except, CE2000N made prior to September 2009
- Will not fit axle housing used in Speedway #s 910-45100 and 715-700
- Catalog correction, # 338 p# 61 shows the incorrect style of housing that this cover fits
$39.99$44.75More InfoTitan Tools 17350 7-Piece Ratcheting Combination Wrench Set, SAE Sizesx
- SAE 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", & 3/4" wrenches
- 72 fine-tooth ratchet design for fast performance
- Less than 5 degree sweep for use in tight spots
- Chrome vanadium steel
- Reusable storage rack
$4.99More Info1932 Ford Interior Door Escutcheonx
These are used on both the door handles and window crank handles.
- Polished stainless steel
- Inside handle escutcheons for 1932 passenger cars
- Sold Each
$49.99More Info55 Degree Steering Column Mount for T-Bucket KitxThese mounts are the economical mounting solution for T-bucket steering columns. They are designed to be used in conjunction with our 1-3/4" diameter stainless or plain steel hot rod steering columns.
- Mount puts the steering column at a 55 degree angle to the firewall
- Fits all of our deluxe "T" bodies with the floor / firewall installed
- Designed to be used with a 1-3/4" diameter steering column
$119.99More InfoAccel 9011C GM HEI 75-86 Extreme 9000 Spark Plug Wires-Over Valvex
Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic spark plug wire set. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.
- 8mm Ferro-Spiral EMI/RFI supression core
- 500 Ohms/ft resistance
- Ceramic boots will withstand 2000° F
- Stainless terminals
- For 1975-86 GM small block V8 HEI (over valve covers)
Ceramic Wire Core Cut-A-Way (Link)
From: $597.99More InfoAFCO 1937 and 1939 Chevy Aluminum Radiator, Chevy Enginex
Please view the product's page for more information
$19.99More Info1932 Ford Windshield Slide Armsx
Die cast, chrome plated windshield slide arms. Curved 1-piece style for 1932 Ford closed cars.
$128.99More InfoStandard Workbench Tool Organizer Kit, Wall Control Storage Systemx
Over 10.5 sq. ft. of storage space and assorted shelving options, hooks and brackets. The standard workbench provides the superior, easy access storage needed for a safe and efficient workspace.
Galvanized steel panels are easy to install with pre-drilled mounting holes on 16" centers. A built-in frame flange provides ample hook clearance and full access to all holes. The patented Double Offset hook engagement improves hook and stability for safer, more secure tool storage.
- (3) Combo panels 32" x 16"
- (1) 9" shelf assembly with dividers
- (1) 6" shelf assembly
- (3) Plastic bins with bin hanger
- (1) Screwdriver holder assembly
- (1) Hammer bracket
- (20) Assorted hooks & brackets
- Mounting hardware & instructions
- Choose from red, white, blue, or black
$499.99More InfoBillet FM2221PC BBC Mid Mount Serpentine Conversion Kit, Keyway Shaftx
Please view the product's page for more information
$27.99More InfoQuik-Latch Products QL-25-SP Mini Quick-Latch, Polished Aluminumx
These small latches can be used for multi-purpose quick release latching. Center release button stays in the down position until re-latched. Each latch body has a 1-1/4" O.D. and is supplied with one mounting stud, two threaded nuts, and two washers. Mounting cup (sold seperately) is used to mount the stud underneath the panel. Mounting cup can be easily riveted or bolted to the back side of any panel.
- Diameter of Latch Body: 1.23"
- Length of Latch Body: 0.57"
- 1/4"-20 Thread
- Length of Mounting Stud: 2.13"
Works great for:
- T-Bucket bed covers
- Hood pins
- Deck lids
- Air cleaner stud
- Removeable body panels