Want your hot rod to look cool at the show and hot on the street? Speedway Motors has you covered! Whether you’re building a low-buck rat rod roadster, Deuce coupe or fat-fendered sedan, Speedway has thousands of street rod parts, chassis, frames, aluminum radiators, crate engines, accessories, and a variety of professionally engineered street rod kits in stock, ready to ship. Best of all, Speedway's friendly and knowledgeable Techs can help you get the performance hot rod parts you need to get your GM, Chevy, Mopar or Ford car on the road and looking its best.
Heavy duty H-beam connecting rods for S/B Chevy. Full floating wrist pin in silicon bronze bushing. Precision bolt bushing to positively locate cap. Features 8640 PCE 7/16" cap screws.
Weight matched sets of 8. Available in 5.7" or 6.0" lengths.
This harness was designed to offer you all the highest quality components in a package designed for cars with minimum accessories. Each wire is color coded and labeled every few inches.
Our prewired 12 circuit kit will fit all your basic needs and makes wiring a painless process. It is designed especially for the street rod without accessories. It also includes horn relay and connector, turn and hazard signals, dimmer switch connector, circuit breaker for headlights, two flashers, one alternator plug, two ignition switch connectors, plus more.
- Mainfuse box base is 1-7/8" x 3-11/16"
- Box height is 3-3/4"
Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.
These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.
- All-aluminum, furnace-brazed construction
- No cheap epoxy glue or crimped in gaskets
- Maximum amount of fins per inch allows greater heat transfer
- Billet filler necks
- Available in 22", 24", 28", or 31" widths (measurements include tanks)
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.
These Speedway spindles are one piece, drop forged design constructed of high strength 4140 steel, which makes them superior to original components. These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford king pins.
These spindles fit Ford axles from '28-'48. They can be used with period correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from '28-'36.
- Uses 1937-1941 king pin kit
- For Ford axles 1928-1948
- Will not work with 1928-1936 Hubs
- Includes king pin kit
Be sure to include our spindle nut kit (910616004) to properly install these spindles.
910-32104 Instructions (PDF)
Speedway Motors now offers you a 9" Ford street 3rd member for your street rod. We reclaim genuine Ford 9" housings, clean, inspect and install all new components. All bearings, seals, 1310 series yoke and ring & pinion are new!
These Ford 9" 3rd member assemblies feature new Pro Gears ring & pinion, choice of 3.50, 3.70, 3.89, 4.11 or 4.56, Currie 9-Plus limited slip differential, 28 or 31 spline. Shipped in handy plastic carrying case. Assembled by professionals.
910-48345 Instructions (PDF)
Speedway Motors now offers a reproduction version of one of the most popular carburetors ever used, the original Stromberg 97! Original equipment on '30s and '40s cars and trucks, the Stromberg 97 has long been favored by flathead hot rodders and racers who realized the performance qualities of this timeless fuel supplier.
There have been numerous attempts to reproduce this unit, with little success. "Speedy" Bill Smith of Speedway Motors in Lincoln, Nebraska, took on the challenge to make a great product even better. The 9 Super 7 ® Carb brings this reproduction of the original Stromberg 97 2 barrel carb into the 21st Century!
Speedway Motors has incorporated all of the improvements shown above while maintaining the carburetor's original look. Features such as the choke assembly, accelerator pump, main jets and cosmetics have all been faithfully retained. Additionally, each carburetor is individually flow tested and inspected for leaks. Perfection is the result!
Aesthetically, the 9Super7 is nearly identical to the stock unit, minus the large 97 logo that appeared on the side and the patent numbers found on the float bowl area. Upgraded internal parts include; the float, needle, and seat. Jetting and power valve settings remain as they were for the original 97 carbs as well as the cfm and vacuum specs.
The other similarity that the 9 Super 7 shares with the original 97 is the setup and tuning necessary to yield a well-running machine. While perhaps not as simple as bolting on a single four-barrel, the 9 Super 7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required is an intake, a linkage system, a Uni-Syn syncing tool, and a little patience. Be sure to include the Secondary 9 Super 7 when installing multi-carb setups. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs. See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.
- All-new tooling for crisp, flawless castings
- New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
- Stainless steel screws and hardware
- Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
- Features original Stromberg 0.97" venturi diameter
- Modern Nitrophyl float and Neoprene gaskets
- Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running
- Will not stick or dribble like the old Viton-tipped needle and seat setups
- Grose-style jet valve won't corrode in modern fuel, something the original needle and seat units can't do
- Comes with a No. 65 power valve and 0.045" main jets, identical to the stock 97
- Extended brass throttle shaft to simplify multi-carb linkage
Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H fuse block holds 18 standard push-in fuses and can be mounted almost anywhere.
Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.
- Harness has 20 circuits, of which 18 are fused
- Taillight leads measure 17' long
- Includes plug for GM column, headlight switch, dimmer switch, and signal flashers
These classic "Rams Horn" style exhaust manifolds are great for use with most small block Chevy applications, providing optimal clearance for angle plug heads. These manifold kits come complete with all mounting hardware and gaskets.
- Ground smooth with no external bosses or brackets
- 2-1/2" outlet
- Plain, Raw finish
- Nodular cast iron
- For angle or straight plug heads
- Includes all hardware and gaskets
"Street Rod" Page 1 of 25
$7.99More InfoLow Profile Grease Zerksx
Great for spindles and other areas needing added clearance. It has a zinc coated steel body with a stainless steel ball in center. Constructed with 5/16" hex head with 1/4 - 28 UNF thread.
Includes 5 zerks per bag. MUST be used with grease needle # 910-1187.
$29.99More InfoSill Weather Whisker Stripx
After putting in new glass and window felt run channels, you don't want to reuse your old whisker that's on your garnish moldings, so here's a way to prevent scratching up that new glass. We now offer a 48" long, 9/16" tall whisker strip. Only offered in black.
$59.99More Info1928-31 Model A Front Crossmemberx
These replacement 1928-31 Model 'A' Ford front crossmembers lower a Model A chassis 2" below a stock crossmember. Replaces a cracked original or use it to start your reproduction frame off right. Made of heavy, 7-gauge steel with clearance for 1-3/4" cross spring. Welds to frame boxing plates of original or repro chassis.
$89.99More InfoSpeedway Ultrasonic Multi-Purpose Parts Cleanerx
This ultrasonic parts cleaner is ideal for cleaning carburetor parts, fuel injector parts, small items such as wheel bearings, and other delicate components. Features a 6.6" x 5.4" x 2.5" tank size and includes a cleaning basket.
- Works on 110 volt power
- Adjustable timer in 5 min. increments up to 30 mins.
- Works well with a white vinegar solution
$289.99More InfoSpecialty Power Windows WWK-2 Standard Universal Wiper Drive Kitx
This universal, dual wiper drive kit has two wiper shafts that are driven by a remote mounted, commercial duty, 2-speed wiper motor. The sweep is adjustable from 90°-160° in 10° increments. Wiper shafts accept arms (not included) that fit 1/2" fine spline knurls or arms that fit 1/4" shafts.
This complete drive kit has a standard 72" drive cable and 2-speed rotary (knob) switch.
Manufactured by Specialty Power Windows.
$49.99More InfoSPAL Thermoswitch Relay and Wiring Harness Kitx
This easy to use cooling fan relay kit includes a labeled wiring harness, 40 amp relay, fuse holder and coolant sensor. Available with 185° on/165° off or 195° on/175° off. Works great with the Spal Pulse-Width Fan Controller.
- Relay wiring kits are a must-have when installing an electric fan
- Designed to safely integrate with OEM wiring
- Waterproof 40/50 Amp relay
- Printed wires (for ease of installation)
- 3/8" NPT (National Pipe Thread) stainless steel switch
- Optional switched override capability
Modern Driveline Reverse Switch Harness for GM T5 and T56 Transmissionsx
These harnesses for transmission neutral safety switch/reverse light switches are designed for use with GM T5 and T56 transmissions.
- Factory style
- For GM T5 and T56 transmissions
$16.99More InfoRocker Arm Balls for 7/16 Inch Studx
Replacement rocker arm pivot balls with oil slots. Comes in a set of 16 for use with 7/16" rocker arm studs.
$44.99$49.99More Info3X Chemistry Satin Rust Encapsulator, Quartx
3X:Chemistry Encapsulator is a single component, high solids paint specially formulated to bond to blasted or rusted metal surfaces. The coating forms a rock hard finish that's flexible, non-porous and will not crack, chip, flake or peel. No hardeners or activators are needed. Encapsulator is completely unaffected by salt, gasoline, oils, battery acids, hydraulic fluids, solvents, chemicals, or corrosives.
- Permanently stops rust and corrosion
- Can be sprayed or brushed over rusted surfaces
- Reusable after opening
- Highest percentage of solids
- Available in Satin
$3.99More InfoUniversal Expanding Body Mountsx
If you are building a lightweight car like a "T" or an "A", mounting the body may present a problem. These neat expanding rubber universal body mounts allow you to drill a 3/4" hole in the top of the frame, insert a 3/8" coarse bolt, tighten, then the body is mounted.
Not recommended for cars newer than 1934.
$14.99More Info14mm to Male AN6 Banjo Bolt Fitting for Power Steering Pumpx
These power steering adapter fittings are designed to simplify the hose connection on your power steering lines. They are made from quality material and are designed to withstand even the harshest environments. The adapter fittings are the perfect solution for adding new lines or for those tight-fit areas where normal, straight fittings won't fit.
Banjo Bolt Fitting for Power Steering Pump
- 14mm to Male AN6
- Zinc-plated steel assembly
- For the pressure connection (outlet) to the pump.
- 90 Degree
- Male Threads
$51.99$68.80More InfoDEi 010502 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Silver, 8 Packx
Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.
- Double-wall construction for added durability
- Helps prevent burn-through, hardening and cracking of boots
- Installs in seconds
- Universal-fits most straight or angled boots
- Withstands 1200°F direct continuous heat
- Non-flammable & protects against chemicals & resists water
$79.99More InfoTall Model T Cowl-Tail Lights, Blackx
Features a 12 volt dual element bulb and can be used as a tail light or a cowl light. 9-1/2" tall with 3" diameter lens. Specify red or amber lens.
Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).
$14.99$19.97More InfoTitan Tools 51503 Mini Tubing Benderx
- Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees
- Use with Brass, Copper, Steel, or Aluminum
- Compact for limited accessibility applications
$159.99$179.99More InfoRapidAir M3800 Master Air Line Kit, 1/2 Inch Linex
These airline kits work great for your workshop with applications from automotive to woodworking. This is a complete compressed air distribution system that is designed to easily install within new walls or on wall surfaces of existing workshops/garages. These kits allow you to put air lines exactly where you want them, just like electrical outlets. No more dragging hoses across the shop to your work area. No special tools required, simply push the flexible tubing into the fittings and put up your system in an afternoon.
- 1/2" line
- Operating pressure: 175psi at 70° F / 140psi at 140° F
- Meets OSHA guidelines
- Temperature range: -40° F to 140° F
- Compatible with common compressor oils
- 100 ft. of 1/2" ID Tubing
- 3 Outlets
- 1 Manifold
- 5 Elbows
- 1 Tee
- Tools (air chuck & filter regulator sold separately)
$24.99More Info2-1/2 Inch Rear Spring Shacklesx
- For 2.5" wide leaf springs
- 1" bushing
- 2.5" center to center
- Sold as a pair
$9.99More InfoHigh Pressure Radiator Cap, 22-24 Lbsx
A must have when racing! High pressure cap for radiators raises boiling point of water.
Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles.
$11.99More InfoStraight Aluminum Hose Connectors, 6 Inchx
These 6" long aluminum radiator/coolant hose connectors have a bead at each end to keep the hose from coming off under pressure. Can be cut to length.
Choose hose diameter (O.D.) needed.
$278.99More InfoHolley 20-132 LS Accessory Drive Bracket-ALT, P/S, A/Cx
Please view the product's page for more information
$49.99More InfoTru-Shot Rechargeable Liquid Sprayer, Blackx
Great for use with Mudd-Off, Mud-X, Brake Kleen, penetrating oils or solvent based products. Not for all water based products.
- One quart capacity
- Powder coated steel can
- Adjustable nozzle
- Works with 80-100 psi
$4.99$9.95More InfoSynthetic Chamoisx
Use on cars, furniture, glass, etc. Can be used wet or dry and washed up to 500 times. Big 26" by 19".
$109.99More InfoLokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finishx
This Lokar Floor Mount Emergency Hand Brake features a chrome plated steel e brake handle and is designed after the automotive industry standards. The ratchet cut gear plate and lock are heat treated for strength and safety. Special feature includes 4-point mounting capabilities for floor mount or side mounting for custom applications.
Comes complete with clevis for installation with Lokar Emergency Brake Cables, Lokar # EC-80FU, Speedway Motors # 491-80FU suggested below. Cables are sold separately.
Lokar Install Tip: Every think about mounting the floor mount hand brake sideways in front of your seat? You can!
$9.99More InfoTaylor 20314 14 Inch Braided Grounding Strap Cablex
These braided grounding straps from Taylor Cable are 14" long 4-gauge and feature tin coated copper construction.
- 14" long
- 1" wide
- Tin coated copper
$99.99More Info1932-1953 Flathead Ford V8 Single Valve Springsx
Our complete line of valve train parts to help your flathead Ford V8 run on unleaded fuel. These heavy duty single valve springs are made from top-quality chrome silicon steel and are designed to work with stock 1932-1953 Ford retainers.
- Recommended for most street performance 1932-53 Ford/Mercury Flathead V8s
- Chrome silicon material delivers reliable performance
- Proper seat pressure for most street and street/strip Flathead cams
- Installed Height: 2.00"
- Seat Pressure: 85 lbs @ 2.00" installed height
Note: "Full Race" cams should be paired with our 450-4005 dual valve springs.
Flathead Valve Assembly (Link)
Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage Systemx
Durable, all-steel construction will not warp, fray or crack. Attractive, scratch resistant, baked-on powder coat finish wipes clean for long-lasting beauty for any shop or work area. Installation is easy and absolutely no framework is required.
- 32" tall x 32" wide x 3/4" deep
- Pack of two
- Durable and versatile
- 20 gauge steel with a baked-on rust and scratch resistant finish
- Slotted to accept Wall Control accessories
- Holes accept conventional 1/4" peg hooks
- Choose from blue, grey, red, white, or galvanized steel
$17.99More InfoSweet Mfg. 001-21040 Rack and Pinion Replacement Bootx
These high quality rubber replacement boots for Sweet Mfg. rack and pinions perform as good as they look.
- Replacement for Sweet Mfg. rack and pinion
- High quality rubber construction
$14.99$19.99More InfoDura-Bond FKC-1HP Small Block Chevy Engine Finishing Hardwarex
- (4) Head Dowels
- (2) Timing Cover Dowles
- (3) Cam Bolts
- (1) Cam Lock Plate
- (2) Oil Filter Adaptor Bolts
- (1) Long Woodruff Key
- (2) Short Woodruff Keys
- (2) Transmission Dowels
$139.99More Info1928-29 Dropped Stainless Headlight Barsx
1928-1929 Dropped style stainless steel headlight bars. Polished.
Top width (flange tip to flange tip) 42-1/2"
Bottom width (flange tip to flange tip) 38-1/2"
$999.99More InfoLongacre Accuset II Scale Kitx
- Push one button for all 4 wheel weights plus cross weight
- Push a second button for all partial %
- Baseline memory recall
- Heavy duty red HiFlex cables with billet AN connectors
- 4 LMF™ swirl finished 15" x 15" low profile pads
- 1500 lb. per pad capacity, 6000 lb. total
- 2-year limited warranty
- Includes FREE scale pad box
- Push one button for all 4 wheel weights plus cross weight
$219.99More InfoPercy's Speedglass Window Material, 1/8 Inch Thickx
This amazing material from Percy's is just the ticket for windshields, side and rear windows. Not to be confused with the more economical plexi-glass, this material allows anyone to cut to fit with common hand tools, but its special coating is scratch and chemical resistant.
This surface hardened plastic is similar to Lexan, but can be cleaned like normal glass without scratching. You can even use windshield wipers on it and clean it with standard glass cleaners.
- 50% - 75% lighter than glass (depending on thickness)
- 1/2 the weight per equal thickness of glass
- Extremely shatterproof
- Excellent optical clarity
- Coated on both sides with a very scratch resistant coating
- Highly scratch and chemical resistant
- High resistance to pitting or sand blast effect
- Can be cleaned with standard glass cleaner, no extra polishes or cleaners needed
- Excellent water shedding capabilities
Technical Info (PDF)
SpeedGlass Instructions (PDF)
$119.99$124.99More InfoKing Chrome GM One Wire Alternator, 100 Ampx
Streamline engine compartment by eliminating excess wires with this 1-wire alternator. It fit most GM applications and feature a beautiful chrome plated finish. This one wire alternator simply needs hook up direct to the main battery lead or power source. The internal regulator picks up the available current and kicks the alternator into the charge mode at pre set voltage.
- 100 amp, one-wire
- Chrome plated finish
- Quick, easy hook-up with supplied instructions
- Attaches to all popular GM alternator brackets
$17.99More InfoBearing-Seal Kit for Two Mustang II Brake Rotorsx
This bearing and seal kit includes two inner wheel bearings, two outer wheel bearings and two inner grease seals. This kit is enough for two brake rotors and is intended to be used with a new rotor installation as this kit does not include the bearing races or cups.
If your project willl be making use of used rotors, you will require new bearing races or cups. Therefore you will need to purchase the bearing and seal kit # 910-31052 suggested below in place of kit # 910-31000.
Works with Mustang II/Pinto and Granada rotors using Mustang II/Pinto spindles only. It will not work for installing Mustang II/Pinto brake rotors on 1949-1954 Chevy spindles. Not for use with early Chevy spindle brake conversion kits.
Upper OD: 1.900"
Lower OD: 2.150"
Bearing ID: 1.375"
Upper OD: 1.380"
Lower OD: 1.570"
Bearing ID: 0.864"
Never install new hubs with old bearings.
$9.99More InfoFlathead Lifter Wrenchx
Use this handy wrench to set your flathead's adjustable lifters. For use with our 450-F8502 lifters.
$9.99More InfoRubber GM Transmission Cushionx
OEM-style rubber transmission cushion for many '58-'82 GM transmissions including TH350 auto, Muncie, Saginaw, and others.
- Meets or exceeds OEM specifications
- Rubber formulation provides abrasion resistance and aging stability
- Tough, hardened steel plate & inserts
- Chemlock® bonding agent ensures superior rubber-to-metal bond
$24.99More InfoSpeedway Dry Erase Marker Board, 17-1/2 Inch x 19-1/2 Inchx
These dry erase boards are great for making notes at the track or in the garage. Their convenient 17-1/2" x 19-1/2" size make them easy to transport.
- Stamped aluminum
- 17-1/2" tall x 19-1/2" wide
$12.99More InfoSpeed Fast Stainless Safety Wire, .032 Inchx
Speed Fast 304 stainless steel safety wire. Sold in one pound rolls and comes with a handy belt clip.
$9.99More Info9 Inch Ford Viton Pinion Sealx
These Viton 9" Ford rear axle pinion seals are good to over 400° F. Stock rubber seal starts to deteriorate at about 250° F.
$4.99More Info1932 Ford Interior Door Escutcheonx
These are used on both the door handles and window crank handles.
- Polished stainless steel
- Inside handle escutcheons for 1932 passenger cars
- Sold Each