Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Body, Interior & Gauges At Speedway Motors

Speedway Motors is the street rodder's source for body parts, gauges, and interior accessories! Find all the essential fiberglass body components, gauge sets by Stewart Warner and Auto Meter, and hot rod bomber seats, in our online catalog. While you are there, check out our full line of script emblems, rear view mirrors, windshields, fiberglass hoods and grilles. Complete your hot rod with sound proof insulation from Dynalite and Hushmat. Don't forget about Speedway's hot rod bomber seats for your traditional street rod, too!

"Street Rod, Windshields and Glass" Page 1 of 6

  • Sill Weather Whisker Strip
    $29.99
    Sill Weather Whisker Strip
    x
                After putting in new glass and window felt run channels, you don't want to reuse your old whisker that's on your garnish moldings, so here's a way to prevent scratching up that new glass. We now offer a 48" long, 9/16" tall whisker strip. Only offered in black.
            
  • Taylor's TOP Glass Window Material, 1/8 Inch Thick
    Taylor's TOP Glass Window Material, 1/8 Inch Thick
    x
                

    This amazing material from Taylor's TOP Glass is just the ticket for windshields, side and rear windows. Not to be confused with the more economical plexi-glass, this material allows anyone to cut to fit with common hand tools, but its special coating is scratch and chemical resistant.

    This surface hardened plastic is similar to Lexan, but can be cleaned like normal glass without scratching. You can even use windshield wipers on it and clean it with standard glass cleaners.

    • 50% - 75% lighter than glass (depending on thickness)
    • 1/2 the weight per equal thickness of glass
    • Extremely shatterproof
    • Excellent optical clarity
    • Coated on both sides with a very scratch resistant coating
    • Highly scratch and chemical resistant
    • High resistance to pitting or sand blast effect
    • Can be cleaned with standard glass cleaner, no extra polishes or cleaners needed
    • Excellent water shedding capabilities

    Technical Info (PDF)

    Taylor's TOP Glass Instructions (PDF)

  • Lexan Wind Wings
    From: $29.99
    Product Rating: 4.67 Stars
    Lexan Wind Wings
    x
                  16" x 6". Choose from two colors of wind wing, smoke or clear. Wing wings sold in pairs.       
            
  • Past Tech 1932 Ford DuVall   Windshield Frame
    Past Tech 1932 Ford DuVall Windshield Frame
    x
                

    The famous DuVall windshield is most unique windshield frame on the market today. The DuVall name is trademarked by Speedway Motors, so you know you are getting the real thing! Frame is constructed of solid, cast brass which can be polished, painted, or plated. A classic finishing touch to any 1932 Ford street rod.

    Includes 5 ft. of black piping which mounts between the body and the winshield frame. Glass not included.

    555-32600 Instructions (PDF)

  • Threaded Windshield Stud, 1928-36 Ford, 3/8 Inch X 3/8 Inch NF X 2 Inch
    Threaded Windshield Stud, 1928-36 Ford, 3/8 Inch X 3/8 Inch NF X 2 Inch
    x
                

    These threaded windshield studs feature a stop and include one stud and one cone nut. They are zinc plated for longevity. Fits 1928-31 Model A and 1932-36 Ford.

    • Steel material
    • (1) stud, (1) cone nut
    • Sold each

    Not included in our windshield kits.

  • Glass Run Channel
    $24.99
    Product Rating: 4.43 Stars
    Glass Run Channel
    x
                This is a highly flexible U-shaped channel comes in an 8-foot-long x 5/8" wide coil with sides that are 9/16" tall. You will need one coil of window felt per door.
            
  • 1932 Ford 5-Window Garnish Molding, RH, Black
    1932 Ford 5-Window Garnish Molding, RH, Black
    x
                
    • For 1932 Ford 5-window body
    • Heavy gauge stamped steel reproduction
    • Black finish
  • 1928-31 Model A Windshield Rubber, T Style, Closed Car
    1928-31 Model A Windshield Rubber, T Style, Closed Car
    x
                

    1928-31 Model A windshield rubber for closed cars (not supplied with our windshield frames). "T" style windshield rubber seals between the windshield frame and body. Comes with 7 feet of 1" width. Seal is 1" tall from bottom to top of T. Top of T is 1/4" wide.

  • 1915-31 Ford Windshield Swivel, Stainless
    1915-31 Ford Windshield Swivel, Stainless
    x
                

    These windshield swivels are for 1915-1931 Fords with round tubing windshield frames.

    Ford Windshield Swivel

    • Sold each
    • Stainless finish

    Windshield Mount Guide (GIF)

  • 1928-1934 Ford Windshield Pivot Bolt & Nut Set
    1928-1934 Ford Windshield Pivot Bolt & Nut Set
    x
                This polished stainless steel hardware holds the slide arm to the windshield frame on both sides. Fits 1928-1931 Ford Model A closed passenger cars and 1928-1934 Ford pickup trucks.
            
  • Universal Wind Wing Brackets
    $79.99
    Product Rating: 5.00 Stars
    Universal Wind Wing Brackets
    x
                

    Universal wind wing brackets for most 1930-1935 Fords and others. Fully chrome plated.

    Designed to screw into windshield posts. Brackets only. Set of four. Glass not included.

    • 5/16" fine thread
    • Main body (or wing): 2-15/16"
    • From bottom mounting face to tip of main mounting body: 1-3/8"
  • Aluminum Windshield Slug Material With Holes, 9 Inch
    Aluminum Windshield Slug Material With Holes, 9 Inch
    x
                

    Aluminum windshield slug material designed for Speedway's round tube "T" style windshields.  This slips inside the tubing to allow you to attach hinges, glass clips and the frame to the posts.  9" long, drilled and tapped for hinges and glass caps.

    • Designed for round tube "T" style windshields
    • 9 Inch Long
    • Pre-Drilled and Tapped for Hinges and Glass Caps
  • 1932 Ford 5-Window Coupe Windshield Frame
    1932 Ford 5-Window Coupe Windshield Frame
    x
                Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Speedways stock style replacement frame for 1932 Ford 5 window Coupe, Tudor, Ford or and Victoria (not 3 window). Includes upper hinge brackets and lower brackets for mounting the "slide" bars. Plain steel finish.  
    • 43" wide @ bottom
    • 44" wide @ top
    • 13-3/4" tall @ sides
    • 12-1/4" tall @ center 

    Note: No glass or windshield rubber included with our windshield frames.

  • Mail Slot Rear Window Frame
    From: $84.99
    Product Rating: 5.00 Stars
    Mail Slot Rear Window Frame
    x
                

    Finally a rear window sized for Rods and Customs. Glass size is 19" x 3-3/8". Window is split so that the inner and outer halves can sandwich the glass and top material upon installation. Your choice of plain (cast finish as provided) or polished aluminum (shown in photo) finished frame. 

    Includes glass pattern, but sold without glass.

    555-60009 Instructions (PDF)

  • 1928-31 Ford Car and 1928-34 Pickup Windshield Slide Arms
    1928-31 Ford Car and 1928-34 Pickup Windshield Slide Arms
    x
                These die cast, chrome-plated arms let the windshield swing open or closed. Fits 1928-31 Ford Model A passenger car and 1928-34 Ford Pickup.
            
  • 1928-1931 Model A Closed Car Windshield Frame, Plain
    1928-1931 Model A Closed Car Windshield Frame, Plain
    x
                

    Mr. Roadster 1928-31 Ford Model A windshields are made of extruded aluminum. Measures 16" tall, 44-1/2" wide at the bottom, and 45-3/8" wide at the top. These windshields have hinges at the top to allow them to open.

    • '28-'29
      • 5-window
      • Special Sport & Business Coupes
      • Tudor Sedan
      • Sedan Delivery
      • Taxi
      • Station Wagon
      • 2-door Sedan w/ vacuum wiper
      • Closed Cab 1/2 ton Pickup
    • '30-'31
      • Station Wagon
      • Murray Town Sedan
      • Briggs Standard & Deluxe Sedan slant windshield
      • Murray 4-door vertical windshield
      • 5-window & Sport Coupes
      • Tudor Sedan
      • Closed Cab Pickup
      • Sedan Delivery
    Note: No glass or windshield rubber included with these windshield frames.
  • 1932 Ford 3-Window Windshield Frame
    1932 Ford 3-Window Windshield Frame
    x
                

    Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Mr. Roadsters '32 Ford 3-window coupe closed car windshield frames are guaranteed to fit like factory replacements. This frame has top hinge brackets only. Plain steel finish.

    • 43" wide @ bottom
    • 43-1/2" wide @ top
    • 13" tall @ sides
    • 11-3/4" tall @ center

    Note: No glass or windshield rubber included with our windshield frames.

  • 1933-34 Ford Closed Car Coupe Windshield Frames
    1933-34 Ford Closed Car Coupe Windshield Frames
    x
                

    Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Factory style replacement for '33-'34 Ford 3 and 5 window Coupe, Sedan and Victoria. Includes holes in the top for attaching the hinges and in the bottom for the "opening" mechanism. Plain steel finish.

    • 43" wide @ top
    • 42-1/2" wide @ bottom
    • 13-1/4" tall @ sides
    • 12-3/4" tall @ center 

    Note: No glass or windshield rubber included with our windshield frames.

  • 1932 Ford Windshield Slide Arms
    1932 Ford Windshield Slide Arms
    x
                Die cast, chrome plated windshield slide arms. Curved 1-piece style for 1932 Ford closed cars.
            
  • Chopped 1932 Ford Windshield Kit, 2 Inch
    $799.99
    $999.99
    Chopped 1932 Ford Windshield Kit, 2 Inch
    x
                

    This 2" chopped windshield kit will give your 1932 Ford Roadster or Speedway Lo-Boy Roadster a sleek profile. Kit features an original style chrome frame, stainless posts, and stainless stanchions.

    Windshield kit includes:

    • Reproduction 1932 stanchions, stainless steel
    • Reproduction 1932 posts, stainless steel
    • Reproduction 1932 windshield frame, chrome
    • Rubber seal set
    • Mounting studs
    • Standard wing nuts
    • Swivels

     

  • 1926-1927 Model T Closed Car Windshield Frame, Plain
    1926-1927 Model T Closed Car Windshield Frame, Plain
    x
                

    Mr. Roadster '26-'27 Model T closed car windshield frame is made of extruded aluminum. Comes with top hinge. Measures 17-1/4" tall, 42-3/4" wide at the bottom, and 43-5/8" wide at the top.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1915-31 Ford Windshield Swivel, Chrome
    1915-31 Ford Windshield Swivel, Chrome
    x
                

    These windshield swivels are for 1915-1931 Fords with round tubing windshield frames.

    Ford Windshield Swivel

    • Sold each
    • Chrome finish

    Windshield Mount Guide (GIF)

  • Aluminum Windshield Slug for Model T, 3-1/2 Inch Long, 2 Hole
    Aluminum Windshield Slug for Model T, 3-1/2 Inch Long, 2 Hole
    x
                

    Aluminum windshield slug material designed for Speedway's round tube "T" style windshields.  This slips inside the tubing to allow you to attach hinges, glass clips and the frame to the posts.  3.5" long, 2 holes drilled and tapped for hinges and glass caps.

    • Aluminum construction
    • Fits Speedway round tube "T" style windshields
    • 3.5" long
    • 2 holes drilled and tapped for hinges and glass caps
  • Lexan Wind Wings with Holes
    $35.99
    Lexan Wind Wings with Holes
    x
                

    Replacement Lexan wind wings for your universal wind wing kits. 

    • These are 16" tall by 5 7/8" wide
    • Thickness: 3/16"
    • Center to center of the two sets of mounting holes on the wind wings is 6 ¾"
    • One set of holes is 3" from the end of the wing and the other set is 6 ¼"
    • Total of 16" in length or height of the wind wing


     

  • Past Tech 1930-31 Ford Model A DuVall   Windshield Frame
    Past Tech 1930-31 Ford Model A DuVall Windshield Frame
    x
                

    The famous DuVall windshield is most unique windshield frame on the market today. The DuVall name is trademarked by Speedway Motors, so you know you are getting the real thing! Frame is constructed of solid, cast brass which can be polished, painted, or plated. A classic finishing touch to any 1930-1931 Ford Model A street rod.

    Includes 5 ft. of black piping which mounts between the body and the winshield frame. Glass not included.

    555-31600 Instructions (PDF)

  • 1933-34 Ford Roadster Windshield Frame, 2 Inch Chopped, Chrome
    1933-34 Ford Roadster Windshield Frame, 2 Inch Chopped, Chrome
    x
                

    Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Available in plain steel or chrome plated steel.

    • 11-3/4" tall
    • 41-5/8" wide @ bottom
    • 44-15/16" wide @ top

    Note: No glass or windshield rubber included with our windshield frames.

  • 1928-1931 Model A Vicky Windshield Frame, Plain
    1928-1931 Model A Vicky Windshield Frame, Plain
    x
                

    Mr. Roadster Ford Model A windshields are made of extruded aluminum. Measures 14-5/8" tall, 45-3/8" wide at the top, and 44-1/2" wide at the bottom. These windshields have hinges at the top to allow them to open.

    Fits the following '28-'31 Ford models:

    • Victoria
    • Cabriolet
    • Town and Convertible Sedans
    • Standard and Deluxe 4-door Briggs Body Sedan slant windshield


    Note: No glass or windshield rubber included with our windshield frames.

  • 1932 Ford Stainless Upper Windsheild Posts
    1932 Ford Stainless Upper Windsheild Posts
    x
                

    These windshield upper posts are stock reproduction and feature side mount mirror holes. They are designed for 1932 Fords and come in a polished stainless steel finish.

    • Upper posts
    • Stock reproduction
    • Side mount mirror holes
    • 1932 Ford passenger cars
    • Polished stainless steel finish
    • Each post includes a tapped 3/8"-24 fine thread hole for mirror mounting
  • Past Tech 1933-34 Ford DuVall   Windshield Frame
    Past Tech 1933-34 Ford DuVall Windshield Frame
    x
                

    The famous DuVall windshield is most unique windshield frame on the market today. The DuVall name is trademarked by Speedway Motors, so you know you are getting the real thing! Frame is constructed of solid, cast brass which can be polished, painted, or plated. A classic finishing touch to any 1933-1934 Ford street rod.

    Glass, hardware and rubber not included.

    555-33600 Instructions (PDF)

  • 1932 Ford Roadster and Phaeton Windshield Frame, Plain
    1932 Ford Roadster and Phaeton Windshield Frame, Plain
    x
                Mr. Roadster steel reproduction 1932 Ford open car (Roadster & Phaeton) windshield frames are available in plain steel or chrome plated steel. Includes windshield rubber.  
    • 10-3/4" height @ center
    • 13-1/2" height @ side
    • 41-3/4" width @ bottom
    • 43-3/4" width @ top

    Note: No glass included with our windshield frames.

  • Past Tech 1935-36 Ford DuVall   Windshield Frame
    Past Tech 1935-36 Ford DuVall Windshield Frame
    x
                

    The famous DuVall windshield is most unique windshield frame on the market today. The DuVall name is trademarked by Speedway Motors, so you know you are getting the real thing! Frame is constructed of solid, cast brass which can be polished, painted, or plated. A classic finishing touch to any 1935-1936 Ford street rod.

    Includes 5 ft. of black piping which mounts between the body and the winshield frame. Glass not included.

    555-35600 Instructions (PDF)

  • 1928-29 Model A Roadster Windshield Frame, Chrome Steel
    1928-29 Model A Roadster Windshield Frame, Chrome Steel
    x
                

    Mr. Roadster '28-'29 Model A Roadster windshield frames feature one-piece constructon and have stock Ford dimensions.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1926-1927 Model T Closed Car Windshield Frame, Polished
    1926-1927 Model T Closed Car Windshield Frame, Polished
    x
                

    Mr. Roadster '26-'27 Model T closed car windshield frame is made of extruded aluminum. Comes with top hinge. Measures 17-1/4" tall, 42-3/4" wide at the bottom, and 43-5/8" wide at the top.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1932 Ford 5-Window Garnish Molding, RH, Chrome
    1932 Ford 5-Window Garnish Molding, RH, Chrome
    x
                
    • For 1932 Ford 5-window body
    • Heavy gauge stamped steel reproduction
    • Black finish
  • 1932-36 Ford Windshield Swivel for Square Tubing Frame, Chrome
    1932-36 Ford Windshield Swivel for Square Tubing Frame, Chrome
    x
                

    These windshield frame cone swivels will work perfect for your 1932-1936 Fords with square tubing windshield frames.

    • 1932-36
    • Ford Square Tubing Windshield Frames
    • Mount these at pivot point of stanchion
    • Available in die cast chrome
    • Sold each

    Windshield Mount Guide (GIF)

  • 1930-31 Model A Standard Roadster Windshield Frame, 2 Inch Chopped, Plain
    1930-31 Model A Standard Roadster Windshield Frame, 2 Inch Chopped, Plain
    x
                

    Mr. Roadster '30-'31 Model A Roadster windshield frames feature one-piece steel constructon and have a 2" chop for a more streamlined appearance. Plain finish steel for Standard bodies.

    Note: No glass or windshield rubber included with our windshield frames.

  • Aluminum Windshield Slug Material Without Holes, 12 Inch
    Aluminum Windshield Slug Material Without Holes, 12 Inch
    x
                

    Aluminum windshield slug material designed for Speedway's round tube "T" style windshields.  This slips inside the tubing to allow you to attach hinges, glass clips and the frame to the posts.  12" long, no holes pre-drilled.

    • Designed for round tube "T" style windshields
    • 12 inch long
    • No holes pre-drilled
  • Performance Tool W80641 Windshield Removal Tool
    Performance Tool W80641 Windshield Removal Tool
    x
                This tool is essential to cut out glued glass in 70s and up cars and trucks.  
            
  • 1930-31 Model A Deluxe Roadster Windshield Frame, Plain
    1930-31 Model A Deluxe Roadster Windshield Frame, Plain
    x
                

    Mr. Roadster '30-'31 Model A Roadster windshield frames for Deluxe bodies feature one-piece steel constructon and have stock Ford dimensions.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1930-31 Model A Deluxe Roadster Windshield Frame, Chrome
    1930-31 Model A Deluxe Roadster Windshield Frame, Chrome
    x
                

    Mr. Roadster '30-'31 Model A Roadster windshield frames for Deluxe bodies feature one-piece steel constructon and have stock Ford dimensions.

    Note: No glass or windshield rubber included with our windshield frames.

Goto Previous PagePrevious Page
1 2 3 4 5 6