Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 42

Products

Tools

Shop Street Rod Tools At Speedway Motors

Want your hot rod to look cool at the show and hot on the street? Speedway Motors has you covered! Whether you’re building a low-buck rat rod roadster, Deuce coupe or fat-fendered sedan, Speedway has thousands of street rod parts, chassis, frames, aluminum radiators, crate engines, accessories, and a variety of professionally engineered street rod kits in stock, ready to ship. Best of all, Speedway's friendly and knowledgeable Techs can help you get the performance hot rod parts you need to get your GM, Chevy, Mopar or Ford car on the road and looking its best.

Featured Products
  • Speedway Air Riveter
    $49.99
    Product Rating: 4.91 Stars
    Speedway Air Riveter
    (Part #91004004)
    x
                Rivet like a pro with this heavy duty air riveter. Allows fast assembly and repair of body panels. Includes nose pieces for 3/16", 5/32", 1/8", and 3/32" pop rivets.
            
  • Cleco Fasteners, Steel, 3/16 Inch, Pack/10
    Cleco Fasteners, Steel, 3/16 Inch, Pack/10
    (Part #91004002)
    x
                

    Cleco pins are a definite must for sheet metal fabrication. They're basically spring-loaded, removable pop rivets that allow you to hold two pieces of sheet metal together in proper alignment for drilling or riveting. They work great for Circle Track use for test-fitting panels before they're permanently attached to your vehicle.

    The pins work with thicknesses of up to 1/4 in.

    Steel Cleco Fasteners

    • 3/16 Inch
    • Pack/10
  • Titan Tools 11188 Mirror and Pick Up Utility Tool Set
    New
    Titan Tools 11188 Mirror and Pick Up Utility Tool Set
    (Part #72811188)
    x
                

    This utility tool set from Titan Tools entails a mirror and a magnetic retriever. This product is sold as a set.

    Set Includes:

    • Telescoping Inspection Mirror
      • 2" Diameter Mirror
      • Telescopes from 9-1/2" to 28"
      • 5-Section Stainless Steel Shaft
      • Comfortable textured cushion grip
    • Magnetic Retriever
      • Powerful 5 lb. magnet
      • Telescopes from 6-1/2" to 33"
      • Shielded sides for targeted pickups
      • Comfortable textured cushion grip
  • Cam Bearing Driver
    $25.99
    Product Rating: 4.43 Stars
    Cam Bearing Driver
    (Part #91381102)
    x
                Remove and replace your S/B Chevy and 90° V6 cam bearings without damage to the bearings. 

    Note: Always remove cam bearings when boiling or cleaning block.

    913-81102 Instructions (pdf)

  • Edelbrock 4025 Uni-Syn Carburetor Synchronizing Tool
    Edelbrock 4025 Uni-Syn Carburetor Synchronizing Tool
    (Part #3254025)
    x
                

    If you have more than one carb on your hot rod, you need one of these "Uni-Syn" carb synchronizing tools. Just set on the top of your carb and adjust until all the carbs in your tri-power three deuce set-up read the same. 

    Works well on small one barrel and two barrel carbs (downdraft or side-draft). Fits carb necks from 1-3/8" up to 3".

  • Titan Tools 17702 O-Ring and Hook Scribe Kit, 2-Piece
    New
    Titan Tools 17702 O-Ring and Hook Scribe Kit, 2-Piece
    (Part #72817702)
    x
                

    Looking for a quality o-ring hook and scribe set? This one from Titan Tools is exactly what you need.

    • Steel Construction
    • Sold as pair
    • 2-Piece Set
  • Speedway Deluxe Quarter Turn Fastener Tool
    Speedway Deluxe Quarter Turn Fastener Tool
    (Part #91089402)
    x
                

    Stop using a screwdriver...it doesn't fit! This tool makes fast and easy work of removing and attaching panels fastened with 1/4-turn fasteners. Great gift idea!

    Measurement Guide (Link)

  • Small Block Chevy Engine Storage Stand
    Small Block Chevy Engine Storage Stand
    (Part #91681200)
    x
                

    Our handy motor stands allow installation of drives, pulleys and clutches. All four legs fold up for easy storage when stand is not in use. Stand is painted red.

    Note: Engine set up block is shown in photo for reference only and is not provided with the engine stand.

    Fits 1958-Up Small Block Chevy 283-400 engines.

Filter

"Street Rod, Tools" Page 1 of 42

Page 1 of 42

  • Head Stud Remover and Tap Alignment
    Head Stud Remover and Tap Alignment
    (Part #91081131)
    x
                

    Allows removal of stock press-in studs and aligns the tap (7/16"-14) to simplify the installation of screw in rocker studs.

    For S/B Chevy V8 engines.

  • Speedway Ultrasonic Multi-Purpose Parts Cleaner
    Speedway Ultrasonic Multi-Purpose Parts Cleaner
    (Part #91080304)
    x
                

    This ultrasonic parts cleaner is ideal for cleaning carburetor parts, fuel injector parts, small items such as wheel bearings, and other delicate components. Features a 6.6" x 5.4" x 2.5" tank size and includes a cleaning basket. 

    • Works on 110 volt power
    • Adjustable timer in 5 min. increments up to 30 mins.
    • Works well with a white vinegar solution
  • TCI 745504 Midplate Spacer Kit, 1/4 Inch Thick
    TCI 745504 Midplate Spacer Kit, 1/4 Inch Thick
    (Part #282745504)
    x
                

    TCI® Seven, Eight, Nine and Ten inch Race Torque Converters are designed to allow use with or without a midplate. The converter has the stock length nose piece. By removing the sleeve on the pilot, you can use this 1/4" extension.

    Contains:

    • 1 - Pilot Extension
    • 3 - 1/4" Washers
    • 3 - Long converter bolts

    Midplate Spacer Kit Instructions (PDF)

  • Intercomp Digital Pressure Tester
    Intercomp Digital Pressure Tester
    (Part #91381120)
    x
                

    This new pressure setting tool from Intercomp can be used for several jobs. This gauge will work from 0 to 150 psi. in 1/10th of a pound.

    Digital Pressure Tester

    • Large 1/2" back lite display.
    • Gauge features 1/10th of 1% accuracy.

    Setting Mid and High Speed bypasses
    1. Will work to set a high speed up to 150psi.
    2. Comes with a -6 AN female adapter to screw your high speed into

    Setting Tire bleeders

    1. Will work from 0 PSI up. With 1/10th of a pound increments.
    2. Comes with a female quick release fitting that fit the popular Kwick change bleeders.

  • GoJak Dollie Storage Rack
    $89.99
    GoJak Dollie Storage Rack
    (Part #880456)
    x
                

    Convenient storage cart handles up to four GoJaks® and fits all models. The cart loads and unloads in seconds and rolls easily to the job or storage area.

    Rack shown with four GoJaks®, which are not included.

  • Casters for Engine Storage Stand, Set/4
    Casters for Engine Storage Stand, Set/4
    (Part #91081139)
    x
                Casters are 3" x 1-1/4" inch wide making rolling  easier. Includes (2) swivel casters and (2) non-swivel casters. Swivel casters have double row swivel racelay. Each caster rated at  300lbs.
            
  • Race Track Flag Set, 3 Ft. x 3 Ft.
    Race Track Flag Set, 3 Ft. x 3 Ft.
    (Part #91079050)
    x
                100% nylon racing track flags measure 3' x 3'. Each flag is mounted on a sturdy wooden dowel. Dowels measure 4' long and 17 mm in diameter.
            
  • POP Fasteners PS15-CS POP Hand Rivet Gun
    POP Fasteners PS15-CS POP Hand Rivet Gun
    (Part #91004010)
    x
                

    Ergonomic, jam free design with patented compound link that does the work for you. 50% easier to use than any other hand rivet tool on the market.

    • Robust aluminum casting with vanadium steel handle
    • Setting capacity: aluminum rivets up to 3/16" body diameter
    • Contoured handle grips for comfort
    • Rivet retaining handle design for one-handed riveting
    • Supplied with nosepieces for 3/32", 1/8", 5/32" & 3/16" rivets
    • Supplied nosepiece wrench
    • Length: 9.65"
    • Weight: 1.3 lbs.

    Hand Rivet Gun Instructions (PDF)

  • Race Ramps RR-FS FlatStoppers
    $249.99
    Race Ramps RR-FS FlatStoppers
    (Part #2367000)
    x
                

    FlatStoppers were developed as a solution for people having problems with tires developing flat spots when a vehicle is parked for 30 days or longer. Once tires are set on FlatStoppers (on a level surface), they settle into the pad's concave depression, which helps support more of
    the tire. This disperses the weight of the car more evenly onto the tire - helping to prevent any flat spotting. The pads measure 22.3" long x 3.5" high x 14" wide, and will accommodate tires up to 12" wide.

    FlatStoppers will not conduct heat or cold into your tires despite changing floor temperatures.

    Flatstoppers are made with the company's patented super-lightweight 100% solid construction technique - making them highly durable, virtually indestructible, and providing a 6,000 lb. vehicle weight capacity. FlatStoppers' textured coating prevents sliding across floors - including epoxy-coated floors and RaceDeck.

    FlatStoppers won't scratch or otherwise damage floors, and won't rust.

    Rebate  Feb2 - March 31 2015 (PDF) 

     

  • Titan Tools 51503 Mini Tubing Bender
    $14.99
    $19.97
    Product Rating: 4.50 Stars
    Titan Tools 51503 Mini Tubing Bender
    (Part #72851503)
    x
                
    • Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees
    • Use with Brass, Copper, Steel, or Aluminum
    • Compact for limited accessibility applications
  • RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    (Part #9103800)
    x
                These airline kits work great for your workshop with  applications from  automotive to woodworking. This is a complete  compressed air  distribution system that is designed to easily install within new walls  or on wall surfaces of existing  workshops/garages.  These kits allow  you to put air lines exactly where  you want them, just like electrical  outlets.   No more dragging hoses  across the shop to your work area.    No special tools required, simply push the flexible tubing into the  fittings and put up your system in an afternoon.
    • 1/2" line 
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils

    Kit Includes:  

    • 100 ft. of 1/2" ID Tubing
    • 3 Outlets
    • 1 Manifold
    • 5 Elbows
    • 1 Tee
    • Tools     (air chuck & filter regulator sold separately)

    Airline Installation Manual (PDF)

    RapidAir Maxline Warranty (PDF)

  • Clipboard with One Robic SC-505 Stopwatch and Lap Sheets
    Clipboard with One Robic SC-505 Stopwatch and Lap Sheets
    (Part #91082031)
    x
                

    Aluminum clipboard with rubber feet holds stopwatches at an angle for easy viewing. Includes one pad of timing sheets, a pen, and one Robic SC-505 stopwatch.

    Operation Instructions (PDF) 

  • RapidAir M6030 100 FT Maxline Nylon Air Hose Tubing, 3/4 Inch Diameter
    RapidAir M6030 100 FT Maxline Nylon Air Hose Tubing, 3/4 Inch Diameter
    (Part #9106030)
    x
                These airline kits work great for your workshop with  applications from    automotive to woodworking. This is just the airline for your   compressed air   distribution system that is designed to easily install  within new walls   or on wall surfaces of existing  workshops/garages.   You can put these air lines exactly where  you want them, just like  electrical   outlets.   No more dragging hoses  across the shop to your  work area.     No special tools required, simply push the flexible  tubing into your   fittings (sold separately) and put up your system in  an afternoon.
    • 3/4" line 
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils

    Includes:  

    • 100 ft. of 3/4" ID Tubing

    Airline Installation Manual (PDF)

    RapidAir Maxline Warranty (PDF)

  • Deluxe 45 Degree Brake Flaring Tool
    Deluxe 45 Degree Brake Flaring Tool
    (Part #91170081)
    x
                
    • Easily form 45-degree double, single and bubble flares in OE steel, stainless steel and soft metal tubing
    • For use with 3/16"-, 1/4"-, 5/16"- and 3/8"-diameter lines
    • Turret-style design allows you to make those precision flares in minimal time
    • All the brake-flaring forming dies you need are mounted right on the turret
    • T-handle screw clamp securely holds your line in place during forming
    • Vise-mounted
    • Packaged in a blow-molded case

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.



  • AVS GAU-200AVS1 Single Needle Air Suspension Gauge, 0-200 psi
    New
    AVS GAU-200AVS1 Single Needle Air Suspension Gauge, 0-200 psi
    (Part #9109011)
    x
                

    AVS Silver Face Single Needle Gauge is one of the best on the market. It features silver gauge face color and black lettering. Full sweep gauge range 0-200 psi.

    • Silver gauge face
    • Black Lettering
    • Dual Needle
    • Dome shaped glass
    • 2.20 inch diameter
    • Full sweep gauge range
    • 0-200 psi
    • 1/8" NPT threads
  • T56 Release Bearing Remote Bleeder
    T56 Release Bearing Remote Bleeder
    (Part #5151399)
    x
                

    Bleeding a hydraulic system with the stock 97+ GM T56 bleeder isn't something to look forward to.  Crawling under the car and trying to keep brake fluid off new paint is nearly impossible!  This bleeder kit replaces the bleeder screw on your LS1 F-Body, 04-06 Pontiac GTO, or C5 Corvette throwout bearing, and allows you to remotely bleed the system away from the tight quarters of the transmission tunnel.  

    Our lines range from 6-48" allowing you to select the length that will work best for your project. Part number 910-31309 can be used as a bracket to attach the end of the bleeder hose to a firewall or floor pan.

    Fits T-56 throwout bearings off the following applications:

    • 98-02 LS1 F-Body
    • 97-04 C5 Corvette
    • 04-06 Pontiac GTO

    Read more about bleeding hydraulic lines in our tech article, How To Bleed Your Brake Lines.

  • Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    (Part #9103232)
    x
                Durable, all-steel construction will not warp, fray  or crack. Attractive, scratch  resistant,  baked-on powder coat finish wipes clean for long-lasting  beauty for any  shop or work area. Installation is easy and absolutely no  framework is  required. 
    • 32" tall x 32" wide x 3/4" deep
    • Pack of two
    • Durable and versatile
    • 20 gauge steel with a baked-on rust and scratch resistant finish
    • Slotted to accept Wall Control accessories
    • Holes accept conventional 1/4" peg hooks
    • Choose from blue, grey, red, white, or galvanized steel
  • Titan Tools 32980 5LB Telescoping Magnetic Pick Up Tool
    Titan Tools 32980 5LB Telescoping Magnetic Pick Up Tool
    (Part #72811663)
    x
                These 5lb magnetic pick up tools will telescope from 6-1/2" to 33" and are ideal for retrieving dropped parts, fasteners, and tools. They feature a 3/4" diameter head with a comfortable textured cushion grip. 
    • 5lb telescoping magnetic pick up tool
    • 5lb magnet with shielded sides for targeted pick-ups
    • 3/4" Diameter head
    • Telescopes from 6-1/2 to 33"Ideal for retrieving dropped parts, fasteners and tools.
    • Comfortable textured cushion grip
  • Ernst Mfg 964 Yellow Jack Stand Covers - 4 Pack
    Ernst Mfg 964 Yellow Jack Stand Covers - 4 Pack
    (Part #91000964)
    x
                Made of high-compression, rubberized material. Fits most two-ton to six-ton jack stands. Measures 1-1/4" wide x 4-1/4" long on the inside.
            
  • Longacre Accuset II Scale Kit
    $999.99
    Product Rating: 4.33 Stars
    Longacre Accuset II Scale Kit
    (Part #47572593)
    x
                
    • Push one button for all 4 wheel weights plus cross weight
    • Push a second button for all partial %
    • Baseline memory recall
    • Heavy duty red HiFlex cables with billet AN connectors
    • 4 LMF™ swirl finished 15" x 15" low profile pads
    • 1500 lb. per pad capacity, 6000 lb. total
    • 2-year limited warranty
    • Includes FREE scale pad box

    Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 42