Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Suspension At Speedway Motors

Speedway Motors is your number one source for street rod suspension components! Speedway stocks a huge inventory of suspension parts, plus the shocks from AFCO and Bilsein, four bar rear suspension kits, control arms and other specialized components you need to finish any hot rod suspension project. You can improve the ride of your classic street rod with Speedway’s selection of shocks, springs, or complete suspension kits. We also offer the best in air ride setups and coilover kits.

Featured Products
Deluxe Coil-Over Rear Suspension Kit, Plain Finish
Deluxe Coil-Over Rear Suspension Kit, Plain Finish
SKU-91649060
x
            

This rear suspension kit is loaded with high quality components from Speedway and Carrera. Kit includes a steel panhard bar, chrome plated Carrera coil-over shock assemblies, bare steel 32" radius rods, and all mounting brackets and hardware. The Carrera 3-way adjustable, gas pressurized and radial tuned shocks provide an excellent ride. Welding is required for assembly.

  • Kit includes:
    • Steel panhard bar
    • Chrome plated Carrera coil-over shock assemblies
    • Bare steel 32" radius rods
    • All mounting brackets and hardware

Comes with your choice of spring rate. Use the Spring Rate Guide and Coil-Over Mounting guide to select to proper rate for your vehicle.

Spring Rate Guide (GIF) 

Coil-Over Mounting Guide (GIF) 

916-49060 Instructions (PDF)

Mustang II IFS, Standard Tubular Control Arms, Stock Springs and Spindles
Mustang II IFS, Standard Tubular Control Arms, Stock Springs and Spindles
SKU-91034202
x
            

Includes standard upper and offset strutless lower control arms, new standard spindles, rubber brake lines, new black stock type springs and shocks, new manual or rebuilt power rack & pinion with bushings and new tie rods. The 11" brake kit features GM Metric calipers, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.

  • Works with all Speedway and Heidts crossmembers 
  • Kit Includes:
    • Standard Tubular Upper and Lower Strutless Control Arms
    • New Stock Spindles, Springs, and Shocks
    • Rack and Pinion with bushings and tie rods
    • 11" brake kit with GM calipers
  1. Add proper crossmember to complete kit.

Spring Rate Chart (Link)

Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-1/2" - 33-1/2" frame widths, you will be required to purchase 2" Inner Tie Rod Extensions (91034345) or (91034346).

 

Speedway 1928-1948 Ford Forged Spindles w/ King Pins
Speedway 1928-1948 Ford Forged Spindles w/ King Pins
SKU-91032104
x
            

These Speedway spindles are one piece, drop forged design constructed of high strength 4140 steel, which makes them superior to original components. These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford king pins.

These spindles fit Ford axles from '28-'48. They can be used with period correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from '28-'36.

  • Uses 1937-1941 king pin kit
  • For Ford axles 1928-1948
  • Will not work with 1928-1936 Hubs
  • Includes king pin kit

Be sure to include our spindle nut kit (910616004) to properly install these spindles.

Spindle Identification Guide (GIF)

910-32104 Instructions (PDF)

Speedway 1949-1954 Chevy Car Modified Spindles w/ King Pins
Speedway 1949-1954 Chevy Car Modified Spindles w/ King Pins
SKU-91032100
x
            

Speedway has produced these new forged steel reproduction car spindles. They have many features not available with GMs' original design! These spindles are the choice of professional builders because of their clean look, strength and ease of installation.

  • Made to direct mount Mustang II hubs and rotors plus many other later GM's
  • Kingpin geometry changed to work with current radial tire construction
  • Includes many features not found on GM's original design
  • Forged steel (not cast) reproduction spindles
  • Kit includes pair of new spindles with new kingpins fit to spindle
  • Spindle nuts NOT included (sold separately)

Spindle Identification Guide (GIF)

"Street Rod, Suspension" Page 1 of 25

  • Low Profile Grease Zerks
    $7.99
    Product Rating: 5.00 Stars
    Low Profile Grease Zerks
    SKU-91010595
    x
                

    Great for spindles and other areas needing added clearance. It has a zinc coated steel body with a stainless steel ball in center. Constructed with 5/16" hex head with 1/4 - 28 UNF thread.

    Includes 5 zerks per bag. MUST be used with grease needle # 910-1187.

  • AFCO 3840C 4 Inch Double Adjustable Coilover Shock w/o Spring
    AFCO 3840C 4 Inch Double Adjustable Coilover Shock w/o Spring
    SKU-1063840C
    x
                Please view the product's page for more information
            
  • Mustang II IFS, Narrow Control Arms, Coilover Springs, Stock Spindles
    Mustang II IFS, Narrow Control Arms, Coilover Springs, Stock Spindles
    SKU-91034208
    x
                Please view the product's page for more information
            
  • AFCO 23600CR 10 Inch Extreme Chrome Coil-Over Spring, 600 Rate
    AFCO 23600CR 10 Inch Extreme Chrome Coil-Over Spring, 600 Rate
    SKU-10623600CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • Leaf Spring Liner with Lip, 2-1/4 Inch
    Leaf Spring Liner with Lip, 2-1/4 Inch
    SKU-91033038
    x
                Equal partners in a smooth-riding leaf spring suspension are quality shocks and friction-free movement of the spring leafs. This special compound of poly-vinyl plastic has a very "slippery" surface which works as a permanent dry lubricant to eliminate interleaf friction and squeaking. It also features a small lip to keep it in place. 

    One 20 ft. roll does one cross spring. Liner is less than 1/16" thick.

  • Carrera BKR 11-95 Front Coilover Shock Kit 450 Rate, 10.3 Inch Mounted
    Carrera BKR 11-95 Front Coilover Shock Kit 450 Rate, 10.3 Inch Mounted
    SKU-2553235F
    x
                Please view the product's page for more information
            
  • AFCO 5/8 Inch Shock Bearing
    $10.99
    AFCO 5/8 Inch Shock Bearing
    SKU-1080TX
    x
                Mid-to-heavyweight cars can destroy a rubber mount bushing in no time.   Instead, use spherical bearings which don't compress and allow operation   at far greater mounting angles. Works with AFCO 5/8" bearing end   shocks (except K-Series).                               
    • 5/8" I.D.
    • 1/2" wide
    • Bearing only
  • Spring-Behind 6 In Drop Tube Axle Front End for Ford Spindles
    Spring-Behind 6 In Drop Tube Axle Front End for Ford Spindles
    SKU-91339118
    x
                For 1937-1948 early Ford passenger car spindles. Maximun car weight 2500 lbs.

    Kit includes:

    • Two 1-3/4" spring shackles w/ nylon bushings
    • Two spring pivots
    • 26" 4-leaf spring w/ nylon buttons
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 6" dropped
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" Heims with jam nuts
    • Spring U-bolts sold separately

    Instructions (PDF)

    Front Axle/Suspension Tech Tips (GIF)

     

  • Forged I-Beam Split Wishbone Front End Kit
    $649.99
    $699.99
    Product Rating: 3.50 Stars
    Forged I-Beam Split Wishbone Front End Kit
    SKU-91639516
    x
                

    Split bones front end kit for '37-'48 Ford style spindles. Kit is based on our 910-35140.

    Kit Includes:

    • Wishbone style radius rods
    • Radius rod frame mounts
    • 29” leaf spring
    • Shackles
    • Perches
    • Lower shock mounts
    • Hardware
  • 2-1/2 Inch Rear Spring Shackles
    2-1/2 Inch Rear Spring Shackles
    SKU-91033326
    x
                
    • For 2.5" wide leaf springs
    • 1" bushing
    • 2.5" center to center
    • Sold as a pair
  • 3/8 X 3/8 Clevis
    $7.99
    3/8 X 3/8 Clevis
    SKU-6680116
    x
                The correct clevis for mounting our rack and pinion units (668-0105 & 668-0115). 
            
  • AFCO 20136B Coil-Over Mount Bushing
    AFCO 20136B Coil-Over Mount Bushing
    SKU-10620136B
    x
                Coil-over mount bushing.
            
  • AFCO Non-Adjustable Alum. Coil-Over Shock Kit, 7 Inch Stroke, 13 Inch Comp.
    AFCO Non-Adjustable Alum. Coil-Over Shock Kit, 7 Inch Stroke, 13 Inch Comp.
    SKU-1061370
    x
                

    AFCO has been building racing shocks for over 20 years and are now applying their technology to street rod shocks. These aluminum coilover shock kits have superior FIXED valving that will give you a better ride and improve handling.

    • Each shock is hand built and dyno tested
    • Supplied with two 5/8" I.D. polyurethane bushings
    • Includes AFCO Mirror Finish coilover springs in the rate of your choice
    • Kit includes (2) shocks, (2) springs, and (2) coil-over hardware kits
  • Spindle Nuts for Mustang II Spindle
    Spindle Nuts for Mustang II Spindle
    SKU-91631936
    x
                

    These spindle nuts are for your Mustang II Spindle. They are a combination of a castle nut and a washer.

    • Includes Cotter Pin
    • Sold as Pair
    • Combination of castle nut and washer
  • AFCO 3240C Pro Touring Elite Series Shock, 4 Inch Stroke
    AFCO 3240C Pro Touring Elite Series Shock, 4 Inch Stroke
    SKU-1063240C
    x
                

    AFCO's Pro Touring Elite Series double adjustable shocks offer a unique blend of hydraulic and gas-assisted dampening that provides unparalleled on-and-off track performance. These shocks will revolutionize the handling of your dual-purpose street/autocross vehicle. 

    • Remote mounted canister allows for convenient dampening adjustment
    • Double Adjustability - broad range of adjustment
    • 1/2" I.D. x 1" wide Teflon lined spherical bearing end mounts

    Suggested Spring Height

    • 4" Stroke:  7-8"
    • 5" Stroke:  10-12"
    • 7" Stroke:  12-14"

    Coil-over compatible with purchase of additional parts.

    Front Coil-Over Mounting Guide (GIF)

    Rear Coil-Over Mounting Guide (GIF)

     

  • QA1 COM8T-102PK 1 Inch Bearing Kit
    QA1 COM8T-102PK 1 Inch Bearing Kit
    SKU-2558102
    x
                Kit Includes:     
    • (2) Steel Spherical Bearings
      • 0.5" I.D.
      • 1.0" O.D.
      • 1.0" Wide
    • (4) Snap Rings
  • 1942-48 Ford Composite Leaf Spring Rear Suspension Kit
    1942-48 Ford Composite Leaf Spring Rear Suspension Kit
    SKU-91049942
    x
                

    Give your 1942-48 fat-fendered Ford state-of-the-art ride and handling with the Speedway composite leaf rear suspension kit. Composite springs are the new wave of performance spring material. They are lighter than steel, respond faster, last up to 5 times longer, and will not rust or corrode like traditional leaf springs. The monoleaf design also ensures noise- and friction-free performance, while providing the softest, smoothest ride imaginable.

    Kits include a pair of springs, stainless steel mounting brackets, gas-charged shock absorbers, and hardware. Order optional bolt-on rear sway bar 91643500 for increased handling control.

    • Monoleaf design is free of interleaf friction & squeaks
    • Springs will not corrode and are paintable
    • Stainless brackets can be polished
    • Brackets add much needed reinforcement to rear of frame
    • Spring rates matched to application
    • Smooth ride
    • Gas charged shocks
  • AFCO 23500CR 10 Inch Extreme Chrome Coil-Over Spring, 500 Rate
    AFCO 23500CR 10 Inch Extreme Chrome Coil-Over Spring, 500 Rate
    SKU-10623500CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • Alum. Small Coilover Shock, 6 In. Polished, Spring Rate 12 In-300 lbs
    Alum. Small Coilover Shock, 6 In. Polished, Spring Rate 12 In-300 lbs
    SKU-582601E
    x
                

    Pro shocks new aluminum small body coil over shocks are 3 way adjustable.  They are fitted with 2-5/8" chrome spring and aluminum coilover kit and make one of the cleanest coil overs on the market for your street rod.  Each shock features urethane mounting bushings with both 1/2" and 5/8" mounting sleeves.

    6” stroke kit has a suggested installed height of 14-3/4” to 15”

    Adjustment Instructions (GIF)

  • AFCO 22375CR 12 Inch Extreme Chrome Coil-Over Spring, 375 Rate
    AFCO 22375CR 12 Inch Extreme Chrome Coil-Over Spring, 375 Rate
    SKU-10622375CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • AFCO 28300-1CR 8 Inch Extreme Chrome Coil-Over Spring, 300 Rate
    AFCO 28300-1CR 8 Inch Extreme Chrome Coil-Over Spring, 300 Rate
    SKU-106283001CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • Ford Upper Steering Arm, Chrome, 7-3/4 Inch, 5/8 Hole
    Ford Upper Steering Arm, Chrome, 7-3/4 Inch, 5/8 Hole
    SKU-91632012
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). This design is available in 6-1/4" or 7-3/4" lengths. The longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. Tapped 5/8" end accepts spherical rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Aluminum LH Female Heim Joint Rod Ends, 1/4 Inch
    Aluminum LH Female Heim Joint Rod Ends, 1/4 Inch
    SKU-1170712
    x
                

    Aluminum rod ends have close tolerance, 3 piece, medium duty rod end.  Hard anodized 7075-T6 aerospace quality aluminum body.  Heat treated, 5210 precision ground ball, Kevlar race.  Self lubricating Teflon liner to seal out dirt an debris.

    Applications: Designed for motorsports application where weight is critical.  All of the strength & features of the precision rod ends at half of the weight.

    ASSEMBLY TIP:
      To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

  • Bilstein F4-BOA-0000788 Chrome Front Shock, 12-13 Inch Ride Height
    Bilstein F4-BOA-0000788 Chrome Front Shock, 12-13 Inch Ride Height
    SKU-2131354
    x
                

    You will find Bilstein shocks as standard equipment on all the European sports and luxury cars. Now you can have Bilstein shocks for your street rod as well. Beautifully chrome plated. 7/16" top bushing and 5/8" bottom. The inner sleeve is 3/4" on these shocks so removing the sleeve will net a 3/4" I.D. and will not work on shock mounts with a smaller O.D.

    Main body is 8-3/4" long to the center of the mounting bushing 

  • Carrera 2254D Street Rod Rear Coil Over Shock Kit, 200 lbs. Rate
    Carrera 2254D Street Rod Rear Coil Over Shock Kit, 200 lbs. Rate
    SKU-2552254D
    x
                

    Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.

    Each kit includes:

    • (1) Chrome 1.63" steel body shock
    • (1) Chrome 10" spring
    • (1) Polished aluminum spring mounting kit
    • Mounted Length:  12-3/8"
    • Compressed Length:  9-3/4"
    • Extended Length:  14-5/8" 
    • Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing

    Coil-Over Mounting Guide (GIF)

    Carrera Spring Rate Chart (GIF)

    Coil-Over Illustration (Link)

  • Weld-On Chassis Tabs, 2-1/2 Inch with 3/8 Hole
    Weld-On Chassis Tabs, 2-1/2 Inch with 3/8 Hole
    SKU-91007215
    x
                

    Weld-on tabs for miscellaneous mounting jobs. You can't make them this good for this price! 

    Sold in packs of 5.

  • Mustang II Coilover IFS w/ Stock Control Arms, Coilovers, Dropped Spindles
    Mustang II Coilover IFS w/ Stock Control Arms, Coilovers, Dropped Spindles
    SKU-91034201
    x
                With our complete Mustang II Independent Front Suspension kit you get   brand new stamped steel upper and lower control arms with polyurethane   bushings, steel 2" dropped spindles, Rubber Brake Lines, Carrera coil-over shock & spring, new manual rack & pinion with bushings   or remanufactured power rack & pinion with bushings and an 11"  brake  kit featuring GM Metric-style calipers, with your choice of 5 x  4-1/2"  or 5 x 4-3/4" bolt patterns. 
    • Works with most Speedway and Heidts crossmembers (be sure to check control arm correspondence when choosing crossmember for your vehicle)
    • These kits are compatible with your application based on which crossmember you have.
    • Kit Includes:
      • New stamped steel upper and lower control arms with polyurethane bushings
      • 2" dropped spindles
      • Carrera coil-over shock & spring
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Crossmember NOT included - Add proper crossmember to complete kit.

    Spring Rate Chart (

  • Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Chrome
    Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Chrome
    SKU-91339017
    x
                

    For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs.

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4 leaf Super Glide™ spring, 1-3/4" wide
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 6" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately
  • Carrera BKR 11-95 Front Coilover Shock Kit 200 Rate, 10.3 Inch Mounted
    Carrera BKR 11-95 Front Coilover Shock Kit 200 Rate, 10.3 Inch Mounted
    SKU-2553235B
    x
                Please view the product's page for more information
            
  • Front End Assembly for Model A Frame, Tube Axle Kit, Chrome
    Front End Assembly for Model A Frame, Tube Axle Kit, Chrome
    SKU-91639515
    x
                

    These front suspension packages make it easier to begin transforming your Model A frame into a rolling chassis. Kits include a 3" drop tube axle, 27" radius rods, leaf spring and shackles. Kit works well with the SM300 Pro Shocks (shocks not included).

    Axle kit designed to work with frame #916-57045.

    Front Axle/Suspension Tech Tips (GIF) 

  • AFCO 27300-1CR 7 Inch Extreme Chrome Coil-Over Spring, 300 Rate
    AFCO 27300-1CR 7 Inch Extreme Chrome Coil-Over Spring, 300 Rate
    SKU-106273001CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • AFCO 23250CR 10 Inch Extreme Chrome Coil-Over Spring, 250 Rate
    AFCO 23250CR 10 Inch Extreme Chrome Coil-Over Spring, 250 Rate
    SKU-10623250CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. This new mirror finish spring line has all the great looks of a chrome spring with no damaging side-effects associated with chemical plating.

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter
    • 3-3/8" outside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • 1935-40 Ford Front Shock Mount Kit, Stainless
    1935-40 Ford Front Shock Mount Kit, Stainless
    SKU-7022509
    x
                

    Includes 2 replacement perch bolts and 2 bolt-on frame brackets. No welding or cutting necessary. Typically used with stock or "split" wishbones. Works well wtih shock 582SM500 (or equivalent).

    NOTE: Will not work with stock '35-'40 Ford sway bar. Will not work with Speedway 4-bar kit 91639108.

  • AFCO 23125CR 10 Inch Extreme Chrome Coil-Over Spring, 125 Rate
    AFCO 23125CR 10 Inch Extreme Chrome Coil-Over Spring, 125 Rate
    SKU-10623125CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • TCI 1937-39 Chevy Car Rear Leaf Spring Kit
    TCI 1937-39 Chevy Car Rear Leaf Spring Kit
    SKU-91042237
    x
                

    These rear leaf spring kits are the perfect way to update the ride and handling of your vintage Chevy while also lowering the stance approximately 2 inches from stock.

    • Leaf Springs
    • Bolt-In Mounting Brackets
    • Weld-On Axle Brackets
    • Shock Kit
    • All Hardware
    • Instructions

    910-42237 Instructions (PDF)

  • AFCO 22400CR 12 Inch Extreme Chrome Coil-Over Spring, 400 Rate
    AFCO 22400CR 12 Inch Extreme Chrome Coil-Over Spring, 400 Rate
    SKU-10622400CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • AFCO 20180-3A T2 Eliminator Stud Mount Assembly
    AFCO 20180-3A T2 Eliminator Stud Mount Assembly
    SKU-106201803A
    x
                Converts shaft end of AFCO T2 Series (Hot Rod Series & Pro Touring Series) shocks to a stud top mount. For shocks purchased after November 2006. 
            
  • AFCO 28500-1CR 8 Inch Extreme Chrome Coil-Over Spring, 500 Rate
    AFCO 28500-1CR 8 Inch Extreme Chrome Coil-Over Spring, 500 Rate
    SKU-106285001CR
    x
                

    Whether you are building a purpose-built drag strip machine or a beautiful show car, Extreme Chrome coilover springs will provide the strength, durability and show stopping good looks you desire. 

    • Industry exclusive 360° polished wire
    • High quality REAL chrome finish
    • Looks great from any angle - not just on the outside edge
    • 2-5/8" inside diameter

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. 

    Afcoil Spring Rate Guide (Link)

    Coil-Over Mounting Guide (Link)

  • AFCO Yellow 2-5/8 I.D. Coil-Over Springs, 14 Inch
    AFCO Yellow 2-5/8 I.D. Coil-Over Springs, 14 Inch
    SKU-10624
    x
                

    There's a lot riding on your springs-literally. Springs are your car's connection to the ground, and their performance is directly related to all other suspension components. Inconsistent, weak springs can cause a multitude of handling problems, and in some cases, dangerous situations. When it comes to choosing coil springs there are many alternatives, but if you want the best you can get, the choice is clear: choose Afcoils. 

    All Afcoils carry a lifetime warranty to remain within 2% of the original nominal free height. Choose your length and rate. 

    • Machine-ground on both ends to tolerances within 1 degree
    • Pressed to solid height and "pre-set" - eliminates potential for additional set
    • Optimized material thickness and coil spacing
    • Made of super-high tensile strength chrome silicon wire for long life and and a consistent rate
    • All springs are cold wound on the latest automated coiling equipment and heat treated twice during manufacturing to be able to withstand even the most abusive conditions
    • To further enhance durability, Afcoils are shot-peened and coated with a durable yellow finish

    Afcoil Spring Rate Guide (GIF)

  • Carrera Front Coilover Shock Kit-225 Spring Rate 11.5 Inch Mounted Lt.
    Carrera Front Coilover Shock Kit-225 Spring Rate 11.5 Inch Mounted Lt.
    SKU-2553243D
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25