Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 7

Products

Steering Shaft, U-Joints and Couplers

Shop Street Rod Steering At Speedway Motors

Let Speedway Motors "Steer" you in the right direction with the right steering components for your street rod!  From steering U-joints from Sweet Mfg. to the top steering columns and drop mounts from Ididit, we've got the best parts at the best prices around.  Don't forget to add a Speedway Motors aluminum steering wheel for the feel behind the wheel that can't be duplicated.

Featured Products
  • Steering Coupler, 3/4"-36 Spline To 3/4" Round Non-Flex
    Steering Coupler, 3/4"-36 Spline To 3/4" Round Non-Flex
    (Part #91032281)
    x
                

    Steel coupler is splined on one end and has a 3/4" round hole on the other. This Mustang II power rack U joint coupler is 2" L x 1.060" D.

    When ordering, select applicable hole size/spline needed.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

  • Steering Rag Joint, 3/4 Inch-30 Spline x 1 Inch DD
    Steering Rag Joint, 3/4 Inch-30 Spline x 1 Inch DD
    (Part #4465231)
    x
                

    These rage joints make it easier to put an Ididit column in your '55-'57 Chevy car when using an aftermarket steering box. 

    Steering U-Joints and Couplers Application Chart (GIF)

    Steering Box/Rack/Spline Chart (Link)

    Spline Size (Link)

     

  • 3/4 O.D. Solid Steel Steering Shaft
    From: $12.99
    Product Rating: 5.00 Stars
    3/4 O.D. Solid Steel Steering Shaft
    (Part #91632200)
    x
                

    Speedways steering shaft is made for you to cut-to-fit. This steering shaft entails:

    •  3/4" O.D.
    • 1018 solid steel steering shaft
    • Available in 24", 36", 48", 60" and 72" lengths

     

    Steer Shaft Application Chart

  • Speedway Steering Coupler, 3/4 Inch-36 to 3/4 Inch Round, Non-Flex
    Speedway Steering Coupler, 3/4 Inch-36 to 3/4 Inch Round, Non-Flex
    (Part #91031581)
    x
                These steel couplers are splined on one end and has a 3/4" round hole on the other. This Mustang II power rack U joint coupler is 2" L x 1.060" D. 
    • 3/4"-36 to 3/4" round
    • Steel
    • Black oxide coating
    • Commonly used on GM Manual and Mustang II Power rack
    • 2" L x 1.060" OD

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.


     

  • Sweet Mfg Steering U-Joint, 3/4 In Round to 3/4 In Round, Universal
    Sweet Mfg Steering U-Joint, 3/4 In Round to 3/4 In Round, Universal
    (Part #91032234)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering u-joints available. Made by Sweet Manufacturing. These steering universal joints have 3/4 weld-on ends.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Firewall Mount Flanged Bearing for Steering Shaft
    Firewall Mount Flanged Bearing for Steering Shaft
    (Part #91032375)
    x
                This firewall mount allows up to 30° of mis-alignment. Includes ball with two pressed steel flanges with 5/16" mounting holes. 

    Choose 3/4" (750) or 1" (1000) shaft size.

    91032375-1000

    • Height: .74"
    • Length: 3.00"
    • Width: 1.90"
    • Mount C to C: 2.26"
    91032375-750
    • Height: .87"
    • Length: 3.00"
    • Width: 1.90"
    • Mount C to C: 2.26"
  • AFCO 30321 Steering Support Bearing
    AFCO 30321 Steering Support Bearing
    (Part #10630321)
    x
                Self-aligning bearing can be installed in firewall or mid-plate to support steering shaft 
            
  • Ididit Steering Column Floor Mount Boot
    Ididit Steering Column Floor Mount Boot
    (Part #4462405)
    x
                This is the boot for Ididit steering column floor mount kits 446-2400, 446-2401, and 446-2402.
            

Filter

"Street Rod, Steering Shaft, U-Joints and Couplers" Page 1 of 7

Page 1 of 7

  • Sweet Mfg Steering U-Joint, 5/8-36 Spline 3/4 DD, Vega/Corvair/GM Rack
    Sweet Mfg Steering U-Joint, 5/8-36 Spline 3/4 DD, Vega/Corvair/GM Rack
    (Part #91032291)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature full compliment bearings and a 5/8"-36 spline.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 5/8"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • AFCO 30307 U-Joint, 9/16 Inch-26 Spline
    AFCO 30307 U-Joint, 9/16 Inch-26 Spline
    (Part #10630307)
    x
                

    These splined U-joints feature a set screw & lock-nut.  Maximum operation angle of this steering universal joint is 32°.

    • 9/16"-26 spline x 3/4" round weld-on
    • Greased needle bearing with Teflon seal
    • Forged 1045 steel
    • Broached spline for better fit
    • Heat-treated forgings
    • 1-1/8" O.D. x 3-3/4" length

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg Chrome U-Joint, 3/4-30 Spline to 3/4 DD, Small GM P/S '78-Up
    Sweet Mfg Chrome U-Joint, 3/4-30 Spline to 3/4 DD, Small GM P/S '78-Up
    (Part #9106151)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-30 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Steering Shaft Assembly, Model T Keyed, 26 Inch Shaft
    Steering Shaft Assembly, Model T Keyed, 26 Inch Shaft
    (Part #91032250)
    x
                

    This steering shaft is for Model "T"s. Adapts early T style steering wheels to your existing steering shaft. This steering shaft is available in short  ( 3" long, bored fit onto a 3/4" diameter shaft); or long (26" overall, 3/4" diameter). Weld-on.

     

     

  • Sweet Mfg U-Joint, 3/4 48-Spline to 3/4 In Round, Wilwood/SJ/MGB
    Sweet Mfg U-Joint, 3/4 48-Spline to 3/4 In Round, Wilwood/SJ/MGB
    (Part #91032241)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

    • Works with: Wilwood, Sweet Jaguar, MGB
    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-48 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Double U-Joint, 5/8 36-Spline to 3/4 DD, Vega/Corvair/GM
    Sweet Mfg. Double U-Joint, 5/8 36-Spline to 3/4 DD, Vega/Corvair/GM
    (Part #9103245)
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.

    • Overall length is 5-1/2”
    • O.D. at ends is 1.12”
    • O.D. in the middle is 1.476”
    • O.D. at caps is 1.350”
    • O.D. at cap retainer screws is 1.545”
    • Length of center section is 2-3/4”
    Learn more about u-joints and steering systems by reading our tech article, U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 3/4-48 Spline to 1 Inch DD, Wilwood/SJ/MGB
    Sweet Mfg Steering U-Joint, 3/4-48 Spline to 1 Inch DD, Wilwood/SJ/MGB
    (Part #91032395)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These 3/4"-48 spline steering universal joints work with Wilwood, Sweet Jaguar, and MGB.

    • Works with: Wilwood, Sweet Jaguar, MGB
    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-48 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg U-Joint, 3/4 In Round to 1 In DD, GM Column/Universal
    Sweet Mfg U-Joint, 3/4 In Round to 1 In DD, GM Column/Universal
    (Part #91032390)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4 round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg U-Joint, 3/4-30 Spline to 3/4 In DD, Small GM P/S 1978-Up
    Sweet Mfg U-Joint, 3/4-30 Spline to 3/4 In DD, Small GM P/S 1978-Up
    (Part #91032293)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are needle bearing and have 3/4"-30 spline. 

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-30 Spline

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 17MM DD, 3/4DD, Corvette, Citation Rack
    Sweet Mfg Steering U-Joint, 17MM DD, 3/4DD, Corvette, Citation Rack
    (Part #9106171)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg U-Joint, 1 In DD to 3/4 DD, IDIDIT/Flaming River Column
    Sweet Mfg U-Joint, 1 In DD to 3/4 DD, IDIDIT/Flaming River Column
    (Part #91032401)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing.

    These steering universal joints are CNC machined from aircraft steel to precision tolerances. The sealed needle bearing design will last ten times longer than a standard pin and block universal joint. The unique nickel plating prevents rust without the hassle of painting.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint 9/16 26 Spline to 3/4 DD, Mustang II Manual
    Sweet Mfg Steering U-Joint 9/16 26 Spline to 3/4 DD, Mustang II Manual
    (Part #91032290)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature forged Vanadium steel yokes and full compliment bearings.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Steering U-Joint, 1 In 48-Spline to 3/4 In Round, GM Column
    Sweet Mfg. Steering U-Joint, 1 In 48-Spline to 3/4 In Round, GM Column
    (Part #91032240)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 1"-48 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg U-Joint 3/4 - 30 Spline to 3/4 Round, Small GM P/S 78-Up
    Sweet Mfg U-Joint 3/4 - 30 Spline to 3/4 Round, Small GM P/S 78-Up
    (Part #91032238)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-30 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg. Double U-Joint, 3/4 In 36-Spline to 3/4 In DD, GM, MII
    Sweet Mfg. Double U-Joint, 3/4 In 36-Spline to 3/4 In DD, GM, MII
    (Part #9103246)
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. This Mustang II power rack U joint is made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Unisteer 8050300 Steering U-Joint, 3/4 Inch Double D to 3/4 Inch DD
    Unisteer 8050300 Steering U-Joint, 3/4 Inch Double D to 3/4 Inch DD
    (Part #910300)
    x
                

    These polished stainless steel steering U-joints look great and use a pinch bolt on each end for easy installation.

    This particular steering universal joint is made to fit 3/4"DD shafting on both sides. Both sides incorporate the pinch bolt design.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    NOTE:  These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.

  • Sweet Mfg Chrome U-Joint, 3/4-30 Spline to 1 DD, Small GM P/S '78-Up
    Sweet Mfg Chrome U-Joint, 3/4-30 Spline to 1 DD, Small GM P/S '78-Up
    (Part #9106152)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-30 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 9/16-26 Spline, 1 DD, Mustang II Manual
    Sweet Mfg Steering U-Joint, 9/16-26 Spline, 1 DD, Mustang II Manual
    (Part #9106132)
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 9/16"-26 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Double Steering U-Joint, .620 In-36 Spline to 3/4 In Round, Chrysler
    Double Steering U-Joint, .620 In-36 Spline to 3/4 In Round, Chrysler
    (Part #91032274)
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • AFCO 30309 U-Joint, 5/8 Inch-36 Spline
    $64.99
    $69.99
    AFCO 30309 U-Joint, 5/8 Inch-36 Spline
    (Part #10630309)
    x
                

    These splined U-joints feature a set screw & lock-nut.  Maximum operation angle of this steering universal joint is 32°.

    • 5/8"-36 spline x 3/4" round weld-on
    • Greased needle bearing with Teflon seal
    • Forged 1045 steel
    • Broached spline for better fit
    • Heat-treated forgings
    • 1-1/8" O.D. x 3-3/4" length

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

Goto Previous PagePrevious Page
1 2 3 4 5 6 7