Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Electrical Wiring & Lights At Speedway Motors

Speedway Motors is your one stop shop for hot rod wiring and lighting. Make wiring your hot rod simple with easy to use wiring harnesses and step by step instructions. Finally finish off your street rod project with specialty headlights, LED dome lights, and blue dot glass tail lights. Find anything on the online catalog and let Speedway Motors eliminate any and all of your hot rod electrical system problems!

"Street Rod, Speedometer Cables" Page 1 of 1

  • Lokar SP-1503HT Ford Speedometer Drive Cable Kit, Stainless
    Lokar SP-1503HT Ford Speedometer Drive Cable Kit, Stainless
    SKU-491SP1503HT
    x
                

    The finishing touch to your mechanical (cable-drive) speedometer installation in your Ford. Kit includes a 7 ft. long braided stainless steel housing and 7' inner cable (you trim to length), billet aluminum fitting ends and instructions.

    Works with all cable-drive aftermarket and original equipment speedometers that have a male 5/8"-18 threaded connection. The transmission end has the standard Ford end with retaining clamp.

     Ford Installation Instructions (PDF) 

  • Lokar SP-1506U Early Ford Speedo Cable Kit w/Ford End, Black Housing
    Lokar SP-1506U Early Ford Speedo Cable Kit w/Ford End, Black Housing
    SKU-491SP1506U
    x
                Premium housing designed with a specially extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing are "U-Cut-to-Fit". Kit comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included)
    Lokar Speedometer Cables are designed to work with most cable driven aftermarket speedometer gauges (such as Auto Meter, Stewart Warner, VDO, Classic Instruments, etc.) or factory speedometer.
    Lokar Speedometer Cables are designed to fit into the transmission gear adapter (not supplied in Chevy or Chrysler Lokar Kit). Customer must have the trans end adapter and speedometer gear for all Chevy and Chrysler applications. For Ford applications, the gear adapter is supplied in the Lokar Kit. Customer must supply the speedo gear and speedo gear retainer clip.
    • All Lokar Speedometer Cables are seven feet (7') long
    • Designed to be "U-Cut-to-Fit".
    • Additional length cable in black or stainless housing is available upon request for an additional charge.
    • Must have a 3/4 - 20 female thread at the speedometer
  • Lokar SP-1505HT Pre-1948 Ford Speedometer Cable Kit, Stainless Housing
    Lokar SP-1505HT Pre-1948 Ford Speedometer Cable Kit, Stainless Housing
    SKU-491SP1505HT
    x
                

    Premium housing designed with a specially extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing are "U-Cut-to-Fit". Kit comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included)
    Lokar Speedometer Cables are designed to work with most cable driven aftermarket speedometer gauges (such as Auto Meter, Stewart Warner, VDO, Classic Instruments, etc.) or factory speedometer.
    Lokar Speedometer Cables are designed to fit into the transmission gear adapter (not supplied in Chevy or Chrysler Lokar Kit). Customer must have the trans end adapter and speedometer gear for all Chevy and Chrysler applications. For Ford applications, the gear adapter is supplied in the Lokar Kit. Customer must supply the speedo gear and speedo gear retainer clip.

    Installation Instructions (PDF) 

    • All Lokar Speedometer Cables are seven feet (7') long
    • Designed to be "U-Cut-to-Fit".
    • Additional length cable in black or stainless housing is available upon request for an additional charge.
    • Must have a 3/4 - 20 female thread at the speedometer
  • Universal Dash Harness for Mechanical Speedometer
    Universal Dash Harness for Mechanical Speedometer
    SKU-91064025
    x
                

    If you want to keep your under-dash area organized or you think that you will need to remove gauges from time to time, then you need to install this universal gauge harness. It will connect to all major brand gauges including Auto Meter and VDO and works with most dash layouts and sizes.

    Includes all connections for volt meter, oil pressure, temperature, tachometer, speedometer and fuel gauges, plus high beams and turn signals. For cable drive speedometer only.

    Universal Dash Mechanical Speedometer Wiring Instructions (PDF) 

  • Modern Driveline Electric Speedometer Harness for GM TKO Transmission
    Modern Driveline Electric Speedometer Harness for GM TKO Transmission
    SKU-910700021
    x
                

    This is a new electric speedometer pigtail harness connector for GM TKO transmissions.

    • Manufactured from quality components
    • Factory quality standards
    • Fits GM applications
    • TKO transmissions
  • Lokar SP-1501HT GM Speedometer Drive Cable Kit, Stainless
    Lokar SP-1501HT GM Speedometer Drive Cable Kit, Stainless
    SKU-491SP1501HT
    x
                

    The finishing touch to your mechanical (cable-drive) speedometer installation in your GM or Mopar. Includes a 7 ft. long stainless steel braided housing and inner cable (you trim to length) with billet aluminum ends, and instructions.

    Works with all cable-drive aftermarket and original equipment speedometers that have a male 5/8"-18 thread connection. Has a 7/8"-18 end for the transmission.

    GM Installation Instructions (PDF) 

  • Modern Driveline Electric Speedometer Harness for GM S10 T5 Trans
    Modern Driveline Electric Speedometer Harness for GM S10 T5 Trans
    SKU-910700022
    x
                

    This is a new electric speedometer pigtail harness connector for GM S10 T-5 transmissions.

    • Manufactured from quality components
    • Factory quality standards
    • Fits GM applications
    • T-5 transmissions
  • Lokar SP-1502U120 U-Cut-to-Fit Ford Speedometer Cable Kit, 122 Inch
    Lokar SP-1502U120 U-Cut-to-Fit Ford Speedometer Cable Kit, 122 Inch
    SKU-491SP1502U120
    x
                

    Premium housing designed with a specifically extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing can be u-cut-to-fit. Kits comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included).

    GM Installation Instructions (PDF)

    Ford Installation Instructions (PDF) 

    • Extruded Liner For Extended Cable Life
    • Billet Aluminum Fittings
    • Works w/Any Cable Driven Speedometer Or Factory Gauges
    • U-Cut-To-Fit Design
    • Black Housing
    • Lifetime Warranty
  • Lokar SP-1500U GM Speedometer Drive Cable Kit, Black
    Lokar SP-1500U GM Speedometer Drive Cable Kit, Black
    SKU-491SP1500U
    x
                

    The finishing touch to your mechanical (cable-drive) speedometer installation in your GM or Mopar. Includes a 7 ft. long glossy black vinyl housing and inner cable (you trim to length) with billet aluminum ends, and instructions.

    Works with all cable-drive aftermarket and original equipment speedometers that have a male 5/8"-18 thread connection. Has a 7/8"-18 end for the transmission.

    GM Installation Instructions (PDF)

  • Lokar SP-1502U108 U-Cut-to-Fit Ford Speedometer Cable Kit, 108 Inch
    Lokar SP-1502U108 U-Cut-to-Fit Ford Speedometer Cable Kit, 108 Inch
    SKU-491SP1502U108
    x
                Premium housing designed with a specifically extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing can be u-cut-to-fit. Kits comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included).
    • Extruded Liner For Extended Cable Life
    • Billet Aluminum Fittings
    • Works w/Any Cable Driven Speedometer Or Factory Gauges
    • U-Cut-To-Fit Design
    • Black Housing
    • Lifetime Warranty

    Ford Installation Instructions (PDF) 

  • Lokar SP-1500U120 U-Cut-to-Fit GM/Chrysler Speedometer Cable, 10 ft.
    Lokar SP-1500U120 U-Cut-to-Fit GM/Chrysler Speedometer Cable, 10 ft.
    SKU-491SP1500U120
    x
                Premium housing designed with a specifically extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing can be u-cut-to-fit. Kits comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included).
    • Extruded Liner For Extended Cable Life
    • Billet Aluminum Fittings
    • Works w/Any Cable Driven Speedometer Or Factory Gauges
    • U-Cut-To-Fit Design
    • Stainless Steel Housing
    • Lifetime Warranty

    GM Installation Instructions (PDF)

    Ford Installation Instructions (PDF) 

  • Lokar SP-1507HT Early Ford Speedo Cable Kit w/Ford End, Stainless
    Lokar SP-1507HT Early Ford Speedo Cable Kit w/Ford End, Stainless
    SKU-491SP1507HT
    x
                Premium housing designed with a specially extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing are "U-Cut-to-Fit". Kit comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included)
    Lokar Speedometer Cables are designed to work with most cable driven aftermarket speedometer gauges (such as Auto Meter, Stewart Warner, VDO, Classic Instruments, etc.) or factory speedometer.
    Lokar Speedometer Cables are designed to fit into the transmission gear adapter (not supplied in Chevy or Chrysler Lokar Kit). Customer must have the trans end adapter and speedometer gear for all Chevy and Chrysler applications. For Ford applications, the gear adapter is supplied in the Lokar Kit. Customer must supply the speedo gear and speedo gear retainer clip.
    • All Lokar Speedometer Cables are seven feet (7') long
    • Designed to be "U-Cut-to-Fit".
    • Additional length cable in black or stainless housing is available upon request for an additional charge.
    • Must have a 3/4 - 20 female thread at the speedometer
  • Lokar SP-1500U108 U-Cut-to-Fit GM/Chrysler Speedometer Cable Kit, 9 ft
    Lokar SP-1500U108 U-Cut-to-Fit GM/Chrysler Speedometer Cable Kit, 9 ft
    SKU-491SP1500U108
    x
                Premium housing designed with a specifically extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing can be u-cut-to-fit. Kits comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included).
    • Extruded Liner For Extended Cable Life
    • Billet Aluminum Fittings
    • Works w/Any Cable Driven Speedometer Or Factory Gauges
    • U-Cut-To-Fit Design
    • Black Housing
    • Lifetime Warranty

    GM Installation Instructions (PDF)

    Ford Installation Instructions (PDF) 

     

  • Lokar SP-1502U Ford Speedometer Drive Cable Kit, Black
    Lokar SP-1502U Ford Speedometer Drive Cable Kit, Black
    SKU-491SP1502U
    x
                

    The finishing touch to your mechanical (cable-drive) speedometer installation in your Ford. Kit includes a 7 ft. long black vinyl housing and 7' inner cable (you trim to length), billet aluminum fitting ends and instructions.

    Works with all cable-drive aftermarket and original equipment speedometers that have a male 5/8"-18 threaded connection.  The transmission end has the standard Ford end with retaining clamp.

    Ford Installation Instructions (PDF)  

     

  • Lokar SP-1504U Pre-1948 Ford Speedometer Cable Kit, Black Housing
    Lokar SP-1504U Pre-1948 Ford Speedometer Cable Kit, Black Housing
    SKU-491SP1504U
    x
                

    Premium housing designed with a specially extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing are "U-Cut-to-Fit". Kit comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included)
    Lokar Speedometer Cables are designed to work with most cable driven aftermarket speedometer gauges (such as Auto Meter, Stewart Warner, VDO, Classic Instruments, etc.) or factory speedometer.
    Lokar Speedometer Cables are designed to fit into the transmission gear adapter (not supplied in Chevy or Chrysler Lokar Kit). Customer must have the trans end adapter and speedometer gear for all Chevy and Chrysler applications. For Ford applications, the gear adapter is supplied in the Lokar Kit. Customer must supply the speedo gear and speedo gear retainer clip.

    Installation Instructions (PDF) 

    • All Lokar Speedometer Cables are seven feet (7') long
    • Designed to be "U-Cut-to-Fit".
    • Additional length cable in black or stainless housing is available upon request for an additional charge.
    • Must have a 3/4 - 20 female thread at the speedometer
  • Lokar SP-1500U144 U-Cut-to-Fit GM/Chrysler Speedometer Cable, 12 ft.
    Lokar SP-1500U144 U-Cut-to-Fit GM/Chrysler Speedometer Cable, 12 ft.
    SKU-491SP1500U144
    x
                Premium housing designed with a specifically extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing can be u-cut-to-fit. Kits comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included).
    • Extruded Liner For Extended Cable Life
    • Billet Aluminum Fittings
    • Works w/Any Cable Driven Speedometer Or Factory Gauges
    • U-Cut-To-Fit Design
    • Stainless Steel Housing
    • Lifetime Warranty

    GM Installation Instructions (PDF)

    Ford Installation Instructions (PDF)