Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Let Speedway Motors "Steer" you in the right direction with the right steering components for your street rod!  From steering U-joints from Sweet Mfg. to the top steering columns and drop mounts from Ididit, we've got the best parts at the best prices around.  Don't forget to add a Speedway Motors aluminum steering wheel for the feel behind the wheel that can't be duplicated.

"Street Rod, Power Steering Components" Page 1 of 2

  • 14mm to Male AN6 Banjo Bolt Fitting for Power Steering Pump
    14mm to Male AN6 Banjo Bolt Fitting for Power Steering Pump
    x
                

    These power steering adapter fittings are designed to simplify the hose connection on your power steering lines. They are made from quality material and are designed to withstand even the harshest environments. The adapter fittings are the perfect solution for adding new lines or for those tight-fit areas where normal, straight fittings won't fit.

    Banjo Bolt Fitting for Power Steering Pump

    • 14mm to Male AN6 
    • Zinc-plated steel assembly
    • For the pressure connection (outlet) to the pump.
    • 90 Degree
    • Swivel
    • Male Threads
  • O-Ring to Inverted Flare Power Steering Adapter
    O-Ring to Inverted Flare Power Steering Adapter
    x
                

    If you have a power steering pump using late model style O-ring sealed hoses that you need to adapt to traditional inverted flare hoses, this inverted flare adapter is a simple fix. Simply insert the adapter into the flow control fitting and then install your inverted flare hose.

    Use to convert from 16mm o-ring to 5/8" inverted flare style.

  • Steel Power Steering Box Adapter Fitting, 16mm-1.5 IFM to -6 AN, 1980-Up GM
    Steel Power Steering Box Adapter Fitting, 16mm-1.5 IFM to -6 AN, 1980-Up GM
    x
                

    Steel 16mm-1.5 IFM power steering box to -6 AN hose adapter fitting.

    Note: Inverted flare are used on most GM steering boxes through 1977. O-ring fittings are used later model GM metric boxes from 1978-up.

  • Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
    Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
    x
                

    Our standard power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. This set adapts a 1982-1988 T-Bird/Cougar rack or our 91034340-POW rack to a GM style pump. Return hose will normally need to be cut to length.

    The pressure line in this kit has an inverted flare fitting at the pump end along with a 14mm O-ring fitting on the rack end. It also comes with an adaptor so that it can work with an O-ring style (metric) pump fitting. We suggest using power steering pumps 91032922-GM or 910-32908.

    Kit includes:

    • Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting.
    • The fittings that go into the 1982-1988 T-bird rack which are 14mm O-ring (high pressure) and 16mm O-ring (low pressure return) with the smaller O-ring fitting hose end being the pressure side for the rack.

     

    910-32535 Instructions (PDF)

    91032535 CPP Instructions (PDF) 

  • Mustang II Power Steering Flow Valve for GM Pump, 2 GPM
    Mustang II Power Steering Flow Valve for GM Pump, 2 GPM
    x
                

    It is common to use an early GM power steering pump with a Mustang II power rack and pinion. Most who have tried it have found that the steering was twitchy or that it easily darts. This valve reduces the fluid flow from three gallons-per-minute to two gallons-per-minute, which cures the problem. For applications using the O-ring style power steering hoses. Installs in the back side of the pump as shown in the extra photos.

    If converting pump from modern 16mm o-ring to traditional 5/8" inverted flare style hoses, order (1) Adapter Insert 910-32921. 

    910-32918 Instructions (PDF)

  • Chrome Braided Hose Covering Kit
    Chrome Braided Hose Covering Kit
    x
                Over 20 feet of stainless steel braided hose cover with chrome plated hose end covers! 

    Easy to install! Easy to clean! Hi-tech detailing at an economy price. Each dress kit contains 3' of vacuum line, 4' of fuel line, 12' of heater hose, and an extra long 4-1/2' of radiator hose sleeving, and 4 shrink sleeves for vacuum lines, 4 fuel line fittings, 4 heater hose fittings, 2 fittings for upper radiator hose.

    Note: The covering is not the actual hose. 

  • Chrome Power Steering Cap
    $6.99
    Chrome Power Steering Cap
    x
                Simply snaps on to your GM saginaw power steering pump's filler cap/dipstick.
            
  • Power Steering Fitting, -6 AN to 14mm-1.5 O-Ring
    Power Steering Fitting, -6 AN to 14mm-1.5 O-Ring
    x
                These steel fittings have a straight thread with o-ring on one side and the common AN6 on the other. Common to Ford rack and pinion and others.
            
  • Single Groove Power Steering Pump Pulley, Billet Aluminum, Short Pump
    Single Groove Power Steering Pump Pulley, Billet Aluminum, Short Pump
    x
                

    Power steering pump pulley for use with short-style (1955-1968) water pumps. Available in plain billet only.

    • For use with our 91032908 power steering pump 
    • Use with 2-groove lower crank pulley when using P/S bracket 91667920
    • Pulley runs off outer groove of lower crank pulley
    • 5/8" shaft hole w/ key way
    • Chamfered on the back side to allow clearance on pumps
  • Tuff Stuff GM Saginaw Power Steering Pump with Reservoir
    Tuff Stuff GM Saginaw Power Steering Pump with Reservoir
    x
                These Saginaw power steering pumps from Tuff Stuff come with a new reservoir, billet cap, chrome hardware and new dipstick. Desirable early style 1965-79 pump with threaded and keyed shaft for easy pulley installation. Available in powder coated black or chrome finish. Hoses are available from most local parts stores. 

    Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet. Pulley not included.

    • Saginaw power steering pump with a new reservoir, billet cap, chrome hardware and new dipstick
    • Powder coated black or chrome
    • Keyed shaft for easy pulley intallation
    • Pulleys available in plain, polished, and chrome
    • 6" diameter pulleys not included

    Works well with small block Chevy engine brackets 916-67920 or 913-32902.

  • Aluminum Male AN10 O-Ring to AN10 Adaptor
    Aluminum Male AN10 O-Ring to AN10 Adaptor
    x
                

    Male O-ring to AN. Steel or aluminum.

    AN Thread Size Guide (GIF)

    Fitting Thread Application Chart (GIF)

  • Derale 13210 Power Steering Cooler Kit, 2-Pass, 8-1/8 x 2-3/4 Inch
    Derale 13210 Power Steering Cooler Kit, 2-Pass, 8-1/8 x 2-3/4 Inch
    x
                

    These tube & fin power steering fluid coolers use 1/2" copper tubing expanded into aluminum cooling fins to extend pump and seal life and improve steeing performance.

    • 2-pass design
    • Extends pump and seal life
    • 11/32" hose barb inlets
    • 4 feet of hose included
    • Extruded plastic cooling fin guards
    • Black powder coated finish
    • Hardware kit included

    Instructions (PDF)

  • GM Power Steering Pump With Chrome Reservoir
    GM Power Steering Pump With Chrome Reservoir
    x
                

    We offer this Saginaw power steering pump with a new reservoir, billet cap, chrome hardware and new dipstick. Desirable early style 1965-79 pump with threaded and keyed shaft for easy pulley installation. Available in chrome. Hoses available from local parts stores.

    Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet. Pulley not included. Use bracket available below.

    Pulleys available separately. AN6 fittings shown for racing applications. 

  • Unisteer 8020630 Polished V-Belt Pulley for Aluminum Pumps
    Unisteer 8020630 Polished V-Belt Pulley for Aluminum Pumps
    x
                

    Polished aluminum V-belt pulley for use with Low Flow & High Flow GM Type II TC steering pumps:

  • Aluminum Power Steering Pumps w/ Reservoir
    Aluminum Power Steering Pumps w/ Reservoir
    x
                

    We offer these brand new lightweight aluminum power steering pumps with a reservoir. Available in either Ford (low flow) or GM (high flow) settings.

    • Ford - low flow for Mustang II power rack & pinion and Ford power steering
    • GM - high flow for T-Bird power rack & pinion and GM power steering
    GM:
        * AN 6 pressure outlet
        * AN 6 return inlet
    Ford:
        * 16mm 1.5 pressure outlet
        * Hose barb return inlet

    Use this Polished V-Belt Pulley sold separately.

  • Billet Specialties 77910 Smooth Power Steering Reservoir w/ Bracket
    Billet Specialties 77910 Smooth Power Steering Reservoir w/ Bracket
    x
                
    • Internally baffled and O-ring sealed cap to prevent splash over
    • Vented cap eliminates positive & negative pressure which leads to foaming
    • Innovative internal return tube greatly reduces fluid turbulence & foaming
    • Extra capacity of up to 15oz. of fluid in a compact design
    • Sleek mounting bracket with internal key lock design hides all hardware
    • -6 & -10 AN male AN fittings are included and pre-installed
    • 100% billet aluminum construction - polished to a mirror finish
    • Overall dimensions: 2-7/8” O.D. x 8-3/4”H (Cap: 3” O.D.)

    Note: Bracket must mount in center of reservoir. Reservoir must be mounted higher than the power steering pump. This reservoir is not compatible with Hydroboost steering systems only because of the lack of fitting ports. It will work with Hydroboost systems with additional fabrication performed by the purchaser at their discretion.

  • Block Mount Power Steering Pump Bracket for Short Water Pump
    Block Mount Power Steering Pump Bracket for Short Water Pump
    x
                These power steering pump brackets are for short water pumps. For mounting Profile or Sweet Pump to small block Chevy V8. Bolt kit included. Anodized purple.
            
  • Steel Power Steering Box Adapter Fitting, 18mm-1.5 IFM to -6 AN, 1980-Up GM
    Steel Power Steering Box Adapter Fitting, 18mm-1.5 IFM to -6 AN, 1980-Up GM
    x
                

    Steel 18mm-1.5 IFM power steering box to -6 AN hose adapter fitting.

    Note: Inverted flare are used on most GM steering boxes through 1977. O-ring fittings are used later model GM metric boxes from 1978-up.

  • Remote Reservoir Power Steering Pumps for GM & T-Bird
    Remote Reservoir Power Steering Pumps for GM & T-Bird
    x
                

    This high flow style remote reservoir power steering pump can be used with GM power steering or the 1982-1988 T-bird power rack and pinion. (Must be revalved if used with Mustang II rack and pinion or Ford power steering).

    • Available in black or chrome
    • Compact size
    • Same as GM Type II TC pumps
    • For use with remote reservoir
    • Pulley installation kit included
    • Pulley NOT included (use pulley 91032909)
  • Mustang II-GM Pump Power Steering Hose Kits
    Mustang II-GM Pump Power Steering Hose Kits
    x
                It is common to use an early GM power steering pump with a Mustang II power rack and pinion. Our Mustang II/GM pump power steering hose assemblies are an inexpensive alternative to  the more costly stainless steel braided hose kits. The return hose included in this kit will  normally need to be cut to length.

    This has an adapter to allow it to work with both metric O-ring and standard inverted flare threads on the power steering pump fitting.

    This will work with the 1974-78 Mustang II power rack and pinion in conjunction with the suggested power steering pumps 910-32922-FORD and 910-32908-BLK. When using an early GM pump with Mustang II rack, you will also need flow reducer valve 910-32918. This valve reduces the fluid flow from three gallons-per-minute to two gallons-per-minute, which cures problems of twitchy steering when these components are used together.
  • High Flow Aluminum Power Steerng Pump for T-Bird & GM
    High Flow Aluminum Power Steerng Pump for T-Bird & GM
    x
                

    These brand new aluminum remote reservoir power steering pumps are a high flow type for use with 1982-88 T-Bird power rack & pinions or GM power steering. Same as GM Type II TC pumps.

    • The fitting at the inlet (suction) end of this pump is AN10 male
    • The fitting at the outlet (pressure) end is AN6 male
    • A 5/8"-18 banjo fitting can be used on this pump by removing the AN6 male fitting. The internal threads are 5/8"-18.
    Use this Polished V-Belt Pulley sold separately.

     

     

  • Black Single Groove Power Steering Pulley, Chevy
    Black Single Groove Power Steering Pulley, Chevy
    x
                Finding stock brackets and v-belt pulleys in  serviceable condition has gotten very difficult over the years.  That's  why we're working to bring you brand new reproductions in a paintable  satin black finish.  No more trying to make chrome aftermarket pulleys  look at home under the hood of your restoration project!
    • Chevy Single Groove Power Steer Pump Pulley
    • Stock"Shallow" variety
    • Keyway Type
    • Satin black finish
    • For use with short water pumps
  • Billet Specialties 77920 Ribbed Power Steering Reservoir w/ Bracket
    Billet Specialties 77920 Ribbed Power Steering Reservoir w/ Bracket
    x
                
    • Internally baffled and O-ring sealed cap to prevent splash over
    • Vented cap eliminates positive & negative pressure which leads to foaming
    • Innovative internal return tube greatly reduces fluid turbulence & foaming
    • Extra capacity of up to 15oz. of fluid in a compact design
    • Sleek mounting bracket with internal key lock design hides all hardware
    • -6 & -10 AN male AN fittings are included and pre-installed
    • 100% billet aluminum construction - polished to a mirror finish
    • Overall dimensions: 2-7/8” O.D. x 8-3/4”H (Cap: 3” O.D.)

    Note: Bracket must mount in center of reservoir. Reservoir must be mounted higher than the power steering pump. This reservoir is not compatible with Hydroboost steering systems only because of the lack of fitting ports. It will work with Hydroboost systems with additional fabrication performed by the purchaser at their discretion.

  • Single Groove Power Steering Pump Pulley, Machined Aluminum
    Single Groove Power Steering Pump Pulley, Machined Aluminum
    x
                

    These power steering pump pulleys for a long water pump are available in plain(Pln), polished(Pol), or chrome(Chr).  Pulley listed is 5-3/4" in diameter.

    • Works only with the long pump and matching long pump pulleys
    • Works with our Saginaw pump (91032908)
    • Bolt-on pulley
    • 5-3/4" in diameter
    • Measures .852" from the front of the pulley to the center of the V-belt groove just as it would be mounted on the pump
    • Choose from plain, polished, or chome finish.
  • Low Flow Power Steering Pump for Mustang II & Ford
    Low Flow Power Steering Pump for Mustang II & Ford
    x
                

    These brand new aluminum remote reservoir power steering pumps are available in low flow for Mustang II power rack & pinion or Ford power steering. Same as GM Type II TC pumps. 

    The flow of this pump is two gallons per minute and is rated at 1,500 PSI.

    Use pulley part #910-32928 sold separately.

     

  • Power Steering Fitting, -6 AN to 1/2 Inch-20 O-Ring
    Power Steering Fitting, -6 AN to 1/2 Inch-20 O-Ring
    x
                These steel fittings have a straight thread with o-ring on one side and the common AN6 on the other. Common to Ford rack and pinion and others.
            
  • Power Steering Hose Kit, -8 AN Reservoir
    Power Steering Hose Kit, -8 AN Reservoir
    x
                

    This power steering hose kit is just what you need to plumb your driver's side remote reservoir power steering set up. The AN 8 hose kit includes 4' of AN 6 high pressure hose, 5' of AN 6 blue aeroquip hose and 3' of AN8 blue aeroquip hose. One 45° AN 6 and one 90° AN 6 fittings are included as well as an AN 6 straight brass push-on and one AN 6 and two AN 8 90° push-on hose ends.

    NOTE: Does NOT contain steering box fittings 

  • Sweet Mfg. 310-30026 Power Steering Pump Single Groove V-Belt Pulley
    Sweet Mfg. 310-30026 Power Steering Pump Single Groove V-Belt Pulley
    x
                

    Single groove aluminum V-belt pulley with Speedway name on it and gray anodized finish. Has a 6" diameter and press-fits onto a 0.663 " diameter shaft.  

    Fits power steering pumps #:

    • 910-32906
    • 910-32902
    • 910-32903
  • Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    x
                

    These stainless steel braided power steering hose kits will connect 1984-88 T-Bird and 1979-93 Mustang racks to most Ford or GM style internal reservoir power steering pumps. The hoses provide a custom look without the need to buy any additional parts. This kit is designed for drivers side pumps and may require hoses to be trimmed to length.

    The kit includes:

    • (2) 24" stainless steel braided hoses with 90° ends installed (rack end)
    • (1) Banjo bolt assembly for the pressure connection to the pump with 5/8" or 16mm threads
    • (1) Custom clamp cover for the return hose which connects to a hose nipple on the pump
    • Rack fittings in this kit are one each, 16mm or 5/8"-18, and one each, 14mm or 9/16"-18

    617-4835 Instructions (PDF) 

  • Gotta Show 131110 Power Steering Line Kit
    Gotta Show 131110 Power Steering Line Kit
    x
                This braided stainless steel line kit gives you the necessary line linking the rack to the remote reservoir canister. Line has an AN 6 female fitting on the end to work with hose kits 617-4835 and 617-4837.
            
  • Head Mount Power Steering Pump Bracket for Short Water Pump
    Head Mount Power Steering Pump Bracket for Short Water Pump
    x
                These power steering pump brackets are for short water pumps. For mounting Profile or Sweet Pump to small block Chevy V8. Bolt kit included. Anodized purple.
            
  • Power Steering Hose Kit, -10 AN Reservoir
    Power Steering Hose Kit, -10 AN Reservoir
    x
                

    This power steering hose kit is just what you need to plumb your driver's side remote reservoir power steering set up. The AN 10 hose kit includes 4' of AN 6 high pressure hose, 5' of AN 6 blue aeroquip hose and 3' of AN 10 blue aeroquip hose  One 45° AN 6 and one 90° AN 6 fittings are included as well as an AN 6 straight brass push-on and one AN 6 and two AN 10 90° push-on hose ends.

    NOTE: Does NOT contain steering box fittings 

  • Sweet Mfg. 305-40336 1300 PSI V-Belt Power Steering Pump w/ Reservoir
    Sweet Mfg. 305-40336 1300 PSI V-Belt Power Steering Pump w/ Reservoir
    x
                

    These steel power steering pumps come with a V-belt style pulley and integral reservoir. These pulleys are popular for use on late models and IMCA modifieds. Comes with AN6 pressure fitting. These power steering pumps feature 1300 psi operating pressure.

    Mounting brackets available for head or block mounting.

    • 1300 psi operating pressure
    • Steel housing with integral reservoir
    • 6" diameter V-belt pulley
    • AN 6 inlet and outlet
    • Mounting bracket not included
  • Billet Specialties 77901 Power Steering Adapter Kit
    Billet Specialties 77901 Power Steering Adapter Kit
    x
                

    This adapter kit expands the available applications of our power steering hose kit to cover most power steering rack & pinion and steering box set-ups.  Fittings in this kit are 1/2"-20, 9/16"-18, 5/8"-18, and 11/16"-18 and all go to AN6.

    Applications:

    • ‘77-’78 Mustang II rack & pinion
    • Maval Mfg. rack & pinion
    • Saginaw 600 steering gear box

     

  • Steel Power Steering Box Adapter Fitting, 14mm-1.5 IFM to -6 AN, 1980-Up GM
    Steel Power Steering Box Adapter Fitting, 14mm-1.5 IFM to -6 AN, 1980-Up GM
    x
                

    Steel 14mm-1.5 IFM power steering box to -6 AN hose adapter fitting.

    Note: Inverted flare are used on most GM steering boxes through 1977. O-ring fittings are used later model GM metric boxes from 1978-up.

  • Aluminum Firewall Mount Power Steering Reservoir, Black, 24 oz
    Aluminum Firewall Mount Power Steering Reservoir, Black, 24 oz
    x
                
    Vertical mounted power steering reservoir tanks available in 24 oz. lightweight. These tanks are NOT internally baffled. 
    1. Features male AN # 6 side inlet return fitting, 1/2" npt female outlet port and 1/8" female npt side port for wing valve
    2. Use rubber hose and push-lock fittings, or braided stainless steel lines.
  • Gotta Show 131151 1965-79 Braided GM Power Steering Hoses
    Gotta Show 131151 1965-79 Braided GM Power Steering Hoses
    x
                

    These stainless steel braided power steering hose kits allow you to fit them to most 1965-1979 GM car & truck boxes with flare fittings.

    • 11/16" inverted flare pressure line fitting
    • 5/8" inverted flare return line fitting
    • 30" line lengths (can be shortened)

    Power Steering Line Installation Instructions (PDF)  

  • Billet Specialties 77900 Power Steering Hose Kit for Remote Reservoir
    Billet Specialties 77900 Power Steering Hose Kit for Remote Reservoir
    x
                

    Premium power steering hose kit by Billet Specialties. Comes with quality Russell Performance adapters for most common pumps, boxes, and racks. Designed for use with Tru Trac systems with remote reservoir only.

    Applications:

    • '65-'78 GM 800 steering gear box (Metric & SAE)
    • '74-'77 Ford Mustang II rack & pinion
    • CPP GM 500 steering box
    • GM Metric rack & pinion
    • Flaming River rack & pinion
    • Dodge Omni rack & pinion

    910-13260 Instructions (PDF)

  • Aeroquip FC300 High Pressure Hose, -10 AN, Per Ft.
    Aeroquip FC300 High Pressure Hose, -10 AN, Per Ft.
    x
                

    Aeroquip FC 300 spec hose to be used as the fuel or power steering line. Choose AN 10 and fittings required.

    Note: This hose works only with these fittings!

    AN 10 Hose Application Chart (GIF)

  • Speedway Ford Power Steering Bracket
    $29.99
    $34.99
    Speedway Ford Power Steering Bracket
    x
                
    • S/B Ford mounting bracket kit for short deck block with short water pump
    • Attaches any KRC steering pump to the left cylinder head
    • This bracket is for 260/289/302 short deck blocks
    • Matches most small block Ford head patterns.
    • Includes spacers and bolts
Goto Previous PagePrevious Page
1 2