Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Suspension At Speedway Motors

Speedway Motors is your number one source for street rod suspension components! Speedway stocks a huge inventory of suspension parts, plus the shocks from AFCO and Bilsein, four bar rear suspension kits, control arms and other specialized components you need to finish any hot rod suspension project. You can improve the ride of your classic street rod with Speedway’s selection of shocks, springs, or complete suspension kits. We also offer the best in air ride setups and coilover kits.

"Street Rod, Panhard Rods" Page 1 of 1

  • Bolt-On Panhard Bar for Ford 8 Inch, 9 Inch Axle
    Bolt-On Panhard Bar for Ford 8 Inch, 9 Inch Axle
    x
                

    This Mr. Roadstar Rear Panhard Bar is used to control the side-to-side movement of the rear axle. This is necessary when using a parallel 4-bar or hairpin radius rod rear suspension. The bar is threaded on one end for length adjustment and is welded on opposite end. This will require one end to be unbolted to allow for the length adjustment. Available in plain finish or polished Stainless Steel.

    Kit includes:

    • Axle Bracket (for 8" or 9" Ford)
    • Bar with Urethane bushed Stainless adjuster - 20" eye-to-eye
    • Frame Bracket

    910-49800 Instructions (PDF)

  • Front Panhard Bars
    From: $79.99
    Product Rating: 5.00 Stars
    Front Panhard Bars
    x
                

    With cross steering a Panhard bar is a must-have. It stops side-to-side sway of chassis relative to the axle. This bar is for spring-over-axle, 4-bar front ends on 1928-1934 Fords.  Tube O.D. is 5/8".

    • 11/16" outside diameter
    • 1/2" inside diameter
    • 1/2" bolt
    • 1/2" heim

    Chassis bracket welds-on, then bar bolts in place to the side of the 4-bar batwing. Panhard bar bracket mounts to a batwing that features a 4-1/2" on center four-bar spacing.

  • 1935-40 Ford Front Panhard Bar Kit
    1935-40 Ford Front Panhard Bar Kit
    x
                

    Use this kit to control side-to-side movement of your front axle. Works with stock or dropped I-beam or tube axles, original or replacement front crossmembers.

    916-39110 Instructions (PDF)

  • Garage Sale - Progressive Slide Link
    $7.99
    $9.99
    Garage Sale
    Garage Sale - Progressive Slide Link
    x
                

    Aluminum progressive slide link. Sold as each. 

     

    This is garage sale priced because it has been used.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - Plain Panhard Bars, 25-3/4
    Garage Sale
    Garage Sale - Plain Panhard Bars, 25-3/4
    x
                

    Plain 3/8"-24 panhard bar from Total Performance. These have a 5/8" OD and are threaded for right hand and left hand threads on the ends. 

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - AFCO 11 inch Aluminum Hex Tube, 5/8
    Garage Sale
    Garage Sale - AFCO 11 inch Aluminum Hex Tube, 5/8
    x
                

    All tubes have wrench flats. Made of 6061-T6 aluminum drawn tubing. Insist on 6061-T6 drawn tubing for strength, durability and precise fit. 

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - AFCO 12 inch Aluminum Hex Tube, 3/4
    Garage Sale
    Garage Sale - AFCO 12 inch Aluminum Hex Tube, 3/4
    x
                

    All tubes have wrench flats. Made of 6061-T6 aluminum drawn tubing. Insist on 6061-T6 drawn tubing for strength, durability and precise fit. 

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 13 inch Aluminum Hex Tube
    Garage Sale
    Garage Sale - 13 inch Aluminum Hex Tube
    x
                

    All tubes have wrench flats. Made of 6061-T6 aluminum drawn tubing. Insist on 6061-T6 drawn tubing for strength, durability and precise fit. 

     

    This is garage sale priced because it has some scratches.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 12 Inch AFCO Aluminum Hex Tubes
    Garage Sale
    Garage Sale - 12 Inch AFCO Aluminum Hex Tubes
    x
                

    All tubes have wrench flats. Made of 6061-T6 aluminum drawn tubing. Insist on 6061-T6 drawn tubing for strength, durability and precise fit. 

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - AFCO 17 inch Aluminum Hex Tube, 5/8
    Garage Sale
    Garage Sale - AFCO 17 inch Aluminum Hex Tube, 5/8
    x
                

    All tubes have wrench flats. Made of 6061-T6 aluminum drawn tubing. Insist on 6061-T6 drawn tubing for strength, durability and precise fit. 

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 11 Inch Aluminum Threaded Tube
    Garage Sale
    Garage Sale - 11 Inch Aluminum Threaded Tube
    x
                

    Insist on 6061-T6 drawn tubing for strength, durability, and precise fit.  Extruded tubing looks similar, but it is not as strong or durable.  Extruded parts are prone to failure, while drawn parts keep performing.  Drawn material offers the same strength as hex without the additional weight.

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - 1935-40 Ford Front Panhard Bar Kit
    Garage Sale
    Garage Sale - 1935-40 Ford Front Panhard Bar Kit
    x
                

    This is garage sale priced because it is missing the frame mounting bracket.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

     

    Use this kit to control side-to-side movement of your front axle. Works with stock or dropped I-beam or tube axles, original or replacement front crossmembers.

    Instructions (PDF) 

  • Garage Sale - Total Performance Lower Four Bar Rods, 15-3/4
    Garage Sale
    Garage Sale - Total Performance Lower Four Bar Rods, 15-3/4
    x
                

    Plain steel four bar rods with 5/8" threads. Right hand and left hand threads.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - Total Performance Four Bar Rod, 14-5/8
    Garage Sale
    Garage Sale - Total Performance Four Bar Rod, 14-5/8
    x
                

    Plain steel four bar rods with 5/8" threads. Right hand and left hand threads.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - AFCO 8 inch Aluminum Hex Tube, 5/8
    Garage Sale
    Garage Sale - AFCO 8 inch Aluminum Hex Tube, 5/8
    x
                

    All tubes have wrench flats. Made of 6061-T6 aluminum drawn tubing. Insist on 6061-T6 drawn tubing for strength, durability and precise fit. 

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Threaded 1/2 Inch Link Rod
    Garage Sale
    Garage Sale - Threaded 1/2 Inch Link Rod
    x
                

    Steel 1/2" threaded rods feature LH threads and RH threads.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

     

     

  • Garage Sale - AFCO Aluminum Threaded Tube - 28"
    Garage Sale
    Garage Sale - AFCO Aluminum Threaded Tube - 28"
    x
                

    This is an all aluminum tube with LH and RH 3/4" threads. Measure 28" in total length.

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Speedway 5/8 Chrome Moly Swedged Tube, 15 Inch Length
    Garage Sale
    Garage Sale - Speedway 5/8 Chrome Moly Swedged Tube, 15 Inch Length
    x
                

    This item is garage sale priced because the plating isn't the best.  15 inches long, LH and RH thread.

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS**

     

    1" O.D. x .065 wall.  4130 tubing.

    5/8"-18 fine thread. 

  • Garage Sale - Total Performance Four Bar Rod, 17-3/8
    Garage Sale
    Garage Sale - Total Performance Four Bar Rod, 17-3/8
    x
                

    Plain steel four bar rods with 5/8" threads. Right hand and left hand threads.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - AFCO 23-3/4 inch Aluminum Hex Tube, 3/4
    Garage Sale
    Garage Sale - AFCO 23-3/4 inch Aluminum Hex Tube, 3/4
    x
                

    All tubes have wrench flats. Made of 6061-T6 aluminum drawn tubing. Insist on 6061-T6 drawn tubing for strength, durability and precise fit. 

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Front Panhard Bar for T-Bucket Chassis, .5 Inch, Chrome
    Front Panhard Bar for T-Bucket Chassis, .5 Inch, Chrome
    x
                

    With cross steering a Panhard bar is a must-have. It stops side-to-side sway of chassis relative to the axle. This bar is for spring-behind-axle, 4-bar front ends on Deluxe style T-Bucket frames and 1927 T-Bucket Fords.

    • For use on Deluxe T-Bucket and '27 T frames
    • Stops side-to-side sway of chassis relative to the axle
    • Beautiful chrome plated finish
    • Easily adjustable for your specific application

     

     

  • Garage Sale - AFCO Aluminum Tube, 17 Inches Long, 3/4 Thread
    Garage Sale
    Garage Sale - AFCO Aluminum Tube, 17 Inches Long, 3/4 Thread
    x
                

    These tubes are garage sale priced because they are different than what we currently offer.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Total Performance Arm Extrension Assembly
    Garage Sale
    Garage Sale - Total Performance Arm Extrension Assembly
    x
                

    Steel throttle arm extention from Total Performance. Measures 3-1/6" in length and 1" in width. Welded boss it 1/2" ID and 9/16" in total height.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - AFCO 13 inch Aluminum Hex Tube
    Garage Sale
    Garage Sale - AFCO 13 inch Aluminum Hex Tube
    x
                

    Aluminum 3/4" hex tube from AFCO. Measures 13" in total length and is threaded LH and RH.

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Bolt-On Panhard Bar for Ford 8 Inch, 9 Inch Axle
    Garage Sale
    Garage Sale - Bolt-On Panhard Bar for Ford 8 Inch, 9 Inch Axle
    x
                

    This Mr. Roadstar Rear Panhard Bar is used to control the side-to-side movement of the rear axle. This is necessary when using a parallel 4-bar or hairpin radius rod rear suspension. The bar is threaded on one end for length adjustment and is welded on opposite end. This will require one end to be unbolted to allow for the length adjustment.

    Kit includes:

    • Axle Bracket (for 8" or 9" Ford)
    • Bar with Urethane bushed Stainless adjuster - 20" eye-to-eye

    Instructions (PDF)

     

    This is garage sale priced because it is missing the frame bracket and one allan head bolt.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - AFCO Aluminum Hex Tie Rod Sleeve, 11 Inch
    Garage Sale
    Garage Sale - AFCO Aluminum Hex Tie Rod Sleeve, 11 Inch
    x
                

    AFCO aluminum hex sleeves have 5/8" left and right hand threads. Made of 6061-T6 aluminum drawn tubing for strength, durability, and precise fit. 

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - AFCO 20 inch Aluminum Hex Tube, 3/4
    Garage Sale
    Garage Sale - AFCO 20 inch Aluminum Hex Tube, 3/4
    x
                

    All tubes have wrench flats. Made of 6061-T6 aluminum drawn tubing. Insist on 6061-T6 drawn tubing for strength, durability and precise fit. 

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - AFCO 22 Inch Aluminum Hex Tube, 3/4 Inch Thread
    Garage Sale
    Garage Sale - AFCO 22 Inch Aluminum Hex Tube, 3/4 Inch Thread
    x
                

    All tubes have wrench flats. Made of 6061-T6 aluminum drawn tubing. Insist on 6061-T6 drawn tubing for strength, durability and precise fit. 

     

    These hex tubes are garage sale priced because they are different than what we currently offer.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - AFCO 23 Inch Aluminum Tube, 1 Inch O.D., 3/4 Inch Thread
    Garage Sale
    Garage Sale - AFCO 23 Inch Aluminum Tube, 1 Inch O.D., 3/4 Inch Thread
    x
                

    Insist on 6061-T6 drawn tubing for strength, durability, and precise fit.  Extruded tubing looks similar, but it is not as strong or durable.  Extruded parts are prone to failure, while drawn parts keep performing.  Drawn material offers the same strength as hex without the additional weight.

     

    These tubes are garage sale priced because they are new old stock slightly different than what we currently offer. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 14" Aluminum Hex Tube 3/4"
    Garage Sale
    Garage Sale - 14" Aluminum Hex Tube 3/4"
    x
                

    All tubes have wrench flats. Made of 6061-T6 aluminum drawn tubing. Insist on 6061-T6 drawn tubing for strength, durability and precise fit. 

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - AFCO 28 inch Aluminum Hex Tube, 3/4
    Garage Sale
    Garage Sale - AFCO 28 inch Aluminum Hex Tube, 3/4
    x
                

    All tubes have wrench flats. Made of 6061-T6 aluminum drawn tubing. Insist on 6061-T6 drawn tubing for strength, durability and precise fit. 

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - AFCO 16 Inch Aluminum Hex Tube, 3/4
    Garage Sale
    Garage Sale - AFCO 16 Inch Aluminum Hex Tube, 3/4
    x
                

    All tubes have wrench flats. Made of 6061-T6 aluminum drawn tubing. Insist on 6061-T6 drawn tubing for strength, durability and precise fit. 

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - AFCO Aluminum Hex Tie Rod Sleeve, 18 Inch
    Garage Sale
    Garage Sale - AFCO Aluminum Hex Tie Rod Sleeve, 18 Inch
    x
                

    AFCO aluminum hex sleeves have 5/8" left and right hand threads. Made of 6061-T6 aluminum drawn tubing for strength, durability, and precise fit. 

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Garage Sale - Total Performance Upper Four Bar Rod, 19-3/8"
    Garage Sale
    Garage Sale - Total Performance Upper Four Bar Rod, 19-3/8"
    x
                

    Plain steel four bar rods with 5/8" threads. Right hand and left hand threads.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS