Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 6

Products

Body

Shop Street Rod Body, Interior & Gauges At Speedway Motors

Speedway Motors is the street rodder's source for body parts, gauges, and interior accessories! Find all the essential fiberglass body components, gauge sets by Stewart Warner and Auto Meter, and hot rod bomber seats, in our online catalog. While you are there, check out our full line of script emblems, rear view mirrors, windshields, fiberglass hoods and grilles. Complete your hot rod with sound proof insulation from Dynalite and Hushmat. Don't forget about Speedway's hot rod bomber seats for your traditional street rod, too!

Filter

"Street Rod, Model A" Page 1 of 6

Page 1 of 6

All

New

Garage Sale

  • 1928-31 Model A Front Crossmember
    1928-31 Model A Front Crossmember
    (Part #91657011)
    x
                

    These replacement 1928-31 Model 'A' Ford front crossmembers lower a Model A chassis 2" below a stock crossmember. Replaces a cracked original or use it to start your reproduction frame off right. Made of heavy, 7-gauge steel with clearance for 1-3/4" cross spring. Welds to frame boxing plates of original or repro chassis.

  • 1928-1929 Ford Open Car Outside Mirror
    1928-1929 Ford Open Car Outside Mirror
    (Part #91133008)
    x
                

    These stainless steel outside rearview mirrors are for 1928-1929 Model A Roadster, Phaeton & convertible open top cars. All mirrors are a stud mount design and have a 4-1/8" O.D. mirror.

  • 1928-1931 Model A Vicky Windshield Frame, Plain
    1928-1931 Model A Vicky Windshield Frame, Plain
    (Part #55528401)
    x
                

    Mr. Roadster Ford Model A windshields are made of extruded aluminum. Measures 14-5/8" tall, 45-3/8" wide at the top, and 44-1/2" wide at the bottom. These windshields have hinges at the top to allow them to open.

    Fits the following '28-'31 Ford models:

    • Victoria
    • Cabriolet
    • Town and Convertible Sedans
    • Standard and Deluxe 4-door Briggs Body Sedan slant windshield


    Note: No glass or windshield rubber included with our windshield frames.

  • Stamped 2 Inch Dropped Crossmember, 1928-1931 Model A Ford
    Stamped 2 Inch Dropped Crossmember, 1928-1931 Model A Ford
    (Part #91657010)
    x
                

    These stamped 1928-31 Model 'A' Ford front crossmembers lower your chassis 2" below a stock crossmember.  They are designed to replace cracked originals or can be used to start your reproduction frame off right. Made of heavy steel with clearance for cross spring. Welds to frame boxing plates of original or repro chassis.

    • Steel Construction
    • Powder Coated Finish
    • For 1928-31 Model A Ford
    • 2 Inch lower than stock ride height
    • Sold Individually

     

  • Steel 1930-31 Ford Model A Radiator Splash Apron, Stock Style
    Steel 1930-31 Ford Model A Radiator Splash Apron, Stock Style
    (Part #91124102)
    x
                

    Stock style 1930-31 Ford Model A steel splash aprons for radiators. Measures 5-1/2" below the grille shell when measured at the center.

  • 1928-29 Model A Roadster Windshield Frame, Chrome Steel
    1928-29 Model A Roadster Windshield Frame, Chrome Steel
    (Part #55528002)
    x
                

    Mr. Roadster '28-'29 Model A Roadster windshield frames feature one-piece constructon and have stock Ford dimensions.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1930-31 Model A Standard Roadster Windshield Frame, 2 Inch Chopped
    1930-31 Model A Standard Roadster Windshield Frame, 2 Inch Chopped
    (Part #55530021)
    x
                

    Mr. Roadster '30-'31 Model A Roadster windshield frames feature one-piece steel constructon and have a 2" chop for a more streamlined appearance. Plain finish steel for Standard bodies.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1928-29 Ford Model A Fender Brace, Front
    1928-29 Ford Model A Fender Brace, Front
    (Part #3403028)
    x
                

    These front fender braces are for 1928-29 Model A Ford's and are made from heavy 14 gauge formed steel.  They can be bolted or rivited on and will fit either left or right side.

    • heavy 14 gauge formed steel
    • fits either left or right rear side
    • bolted or rivited on

     

  • 1930-31 Model A Deluxe Roadster Windshield Frame, Plain
    1930-31 Model A Deluxe Roadster Windshield Frame, Plain
    (Part #55530101)
    x
                

    Mr. Roadster '30-'31 Model A Roadster windshield frames for Deluxe bodies feature one-piece steel constructon and have stock Ford dimensions.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1930-31 Model A Deluxe Roadster Windshield Frame, Chrome
    1930-31 Model A Deluxe Roadster Windshield Frame, Chrome
    (Part #55530102)
    x
                

    Mr. Roadster '30-'31 Model A Roadster windshield frames for Deluxe bodies feature two-piece steel constructon and have stock Ford dimensions.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1928-29 Model A Roadster Windshield Frame, 2 In Chopped, Chrome Steel
    1928-29 Model A Roadster Windshield Frame, 2 In Chopped, Chrome Steel
    (Part #55528022)
    x
                

    Mr. Roadster '28-'29 Model A Roadster Chopped windshield frames feature one-piece constructon and are chopped 2" for a more streamlined appearance.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1928-1929 Model A Closed Car Interior Rear View Mirror
    1928-1929 Model A Closed Car Interior Rear View Mirror
    (Part #92550743)
    x
                

    These street rod rear view mirrors work great as 1928-1929 Model A inside mirrors.  They also are intended for use with closed cars.

    • Steel black bracket
    • 1928-1929 Model A inside mirror
    • Closed cars
    • Overall Length: 5.00"
    • Overall Width: 2.75 (2-3/4")
    • Overall Thickness: 0.25" (1/4")
    • Sold in Quantity: Each
  • Threaded Windshield Stud, 1928-36 Ford, 3/8 In X 3/8 In NF X 2 In
    Threaded Windshield Stud, 1928-36 Ford, 3/8 In X 3/8 In NF X 2 In
    (Part #91123102)
    x
                

    These threaded windshield studs feature a stop and include one stud and one cone nut. They are zinc plated for longevity. Fits 1928-31 Model A and 1932-36 Ford.

    • Steel material
    • (1) stud, (1) cone nut
    • Sold each

    Not included in our windshield kits.

  • Vintage Hood Strap Buckle, Chrome
    $49.99
    $75.00
    Vintage Hood Strap Buckle, Chrome
    (Part #91102512)
    x
                
    • Combine with your own leather strap
    • Early race styling
    • Chrome finish
  • Macs Antique Parts A41563S 30-31 Ford Model A Plain Square Step Plate
    Macs Antique Parts A41563S 30-31 Ford Model A Plain Square Step Plate
    (Part #91129504)
    x
                

    Cast aluminum step plate for 1930-31 Ford Model A. Square plate includes a built-in 5/16" stud to mount the plate (with nut and washer). Square plate has a smooth plain cast zinc finish.

  • 1928-29 Ford Model A Windshield Posts, Plain Aluminum
    1928-29 Ford Model A Windshield Posts, Plain Aluminum
    (Part #91656292)
    x
                These 1928-29 Ford Model A roadster windshield posts are a cast aluminum one-piece design. Length from end to windshield pivot stud hole is approximately 16-1/2". Length from end to end is approximately 18-3/4".
            
  • 1930-31 Ford Model A Locking Door Handles, Matched
    1930-31 Ford Model A Locking Door Handles, Matched
    (Part #911253031)
    x
                

    New and improved offering of the old 911-25204 & 911-25202 part numbers.  These locking 1930-1931 curved mount exterior door handles are offered in matched key pairs to fit either left or right side. They secure to the car door with two screws and a 5/16" attachment shaft.  These door handles are the perfect finishing touch to your stock or modified Model A.  

    • Zinc Material
    • Chrome Finish
    • Sold in pairs
    • 1.20" Shank Length
  • 1928-29 Model A Aluminum Windshield Posts, 2 Inch Chopped
    1928-29 Model A Aluminum Windshield Posts, 2 Inch Chopped
    (Part #91656281)
    x
                These street rod/roadster 1928-29 Ford Model A windshield posts are a cast aluminum  one-piece design. Length from end to windshield pivot stud hole is  approximately 14-1/2". Length from end to end is approximately 16-3/4".                                
    • Cast aluminum.
    • Available in plain only
    • 2 Inch chopped
    • Drilling and fitment fabrication required
    • You polish and save!
  • 1928-29 Ford Model A Hood Latch, Stainless
    1928-29 Ford Model A Hood Latch, Stainless
    (Part #91122500)
    x
                

    These quality 1928-1929 Ford Model A reproduction hood latches are spring loaded and come in a stainless steel finish.  They feature a three-hole mounting bracket and they mock the original style for a perfect look and latch every time.  This latch mounts to the frame easily with three screws.

    • Three hole mounting bracket 
    • Mounting hole spacing of farthest holes is 1-5/8" center to center
    • Center most hole is 5/8" from center line of other mounting holes
    • From mounting surface to top of main body is 2-1/2"
    • Main body is 2-7/16" long
    • From mounting surface to tip of hold down finger is 3"
    • From mounting surface to inner radius of hold down finger is 3-3/8"
    • From center line of main body to tip of hold down finger is 1-1/2"

     

  • 1930-1931 Ford Model A Closed Car Outside Rear View Mirrors
    1930-1931 Ford Model A Closed Car Outside Rear View Mirrors
    (Part #91123009)
    x
                

    These Ford closed car exterior rear view mirrors have an adjustable hinge pin mount. They mount to the outside door hinge with a new pin that replaces the original hinge pin. They are all chrome and feature a 4” diameter mirror head and an 8” arm for good visibility.

    • Works for both left and right sides 
    • 1930-1931 Ford Closed Cars
    • Chrome finish
    • 0 .228" Pin O.D.
    • 1.778" I.D. Opening for Hinge
    • 4" diameter
    • 8" long arm

     

Goto Previous PagePrevious Page
1 2 3 4 5 6