Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Body, Interior & Gauges At Speedway Motors

Speedway Motors is the street rodder's source for body parts, gauges, and interior accessories! Find all the essential fiberglass body components, gauge sets by Stewart Warner and Auto Meter, and hot rod bomber seats, in our online catalog. While you are there, check out our full line of script emblems, rear view mirrors, windshields, fiberglass hoods and grilles. Complete your hot rod with sound proof insulation from Dynalite and Hushmat. Don't forget about Speedway's hot rod bomber seats for your traditional street rod, too!

"Street Rod, Model A" Page 1 of 3

All

New

Garage Sale

  • 1928-31 Model A Front Crossmember
    1928-31 Model A Front Crossmember
    SKU-91657011
    x
                

    These replacement 1928-31 Model 'A' Ford front crossmembers lower a Model A chassis 2" below a stock crossmember. Replaces a cracked original or use it to start your reproduction frame off right. Made of heavy, 7-gauge steel with clearance for 1-3/4" cross spring. Welds to frame boxing plates of original or repro chassis.

  • 1928-1929 Ford Open Car Outside Mirror
    1928-1929 Ford Open Car Outside Mirror
    SKU-91133008
    x
                

    These stainless steel outside rearview mirrors are for 1928-1929 Model A Roadster, Phaeton & convertible open top cars. All mirrors are a stud mount design and have a 4-1/8" O.D. mirror.

  • 1928-1931 Model A Vicky Windshield Frame, Plain
    1928-1931 Model A Vicky Windshield Frame, Plain
    SKU-55528401
    x
                

    Mr. Roadster Ford Model A windshields are made of extruded aluminum. Measures 14-5/8" tall, 45-3/8" wide at the top, and 44-1/2" wide at the bottom. These windshields have hinges at the top to allow them to open.

    Fits the following '28-'31 Ford models:

    • Victoria
    • Cabriolet
    • Town and Convertible Sedans
    • Standard and Deluxe 4-door Briggs Body Sedan slant windshield


    Note: No glass or windshield rubber included with our windshield frames.

  • Stamped 2 Inch Dropped Crossmember, 1928-1931 Model A Ford
    New
    Stamped 2 Inch Dropped Crossmember, 1928-1931 Model A Ford
    SKU-91657010
    x
                

    These stamped 1928-31 Model 'A' Ford front crossmembers lower your chassis 2" below a stock crossmember.  They are designed to replace cracked originals or can be used to start your reproduction frame off right. Made of heavy steel with clearance for cross spring. Welds to frame boxing plates of original or repro chassis.

    • Steel Construction
    • Powder Coated Finish
    • For 1928-31 Model A Ford
    • 2 Inch lower than stock ride height
    • Sold Individually

     

  • Steel 1930-31 Ford Model A Radiator Splash Apron, Stock Style
    Steel 1930-31 Ford Model A Radiator Splash Apron, Stock Style
    SKU-91124102
    x
                

    Stock style 1930-31 Ford Model A steel splash aprons for radiators. Measures 5-1/2" below the grille shell when measured at the center.

  • 1928-29 Model A Roadster Windshield Frame, Chrome Steel
    1928-29 Model A Roadster Windshield Frame, Chrome Steel
    SKU-55528002
    x
                

    Mr. Roadster '28-'29 Model A Roadster windshield frames feature one-piece constructon and have stock Ford dimensions.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1930-31 Model A Standard Roadster Windshield Frame, 2 Inch Chopped
    1930-31 Model A Standard Roadster Windshield Frame, 2 Inch Chopped
    SKU-55530021
    x
                

    Mr. Roadster '30-'31 Model A Roadster windshield frames feature one-piece steel constructon and have a 2" chop for a more streamlined appearance. Plain finish steel for Standard bodies.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1928-29 Ford Model A Fender Brace, Front
    1928-29 Ford Model A Fender Brace, Front
    SKU-3403028
    x
                

    These front fender braces are for 1928-29 Model A Ford's and are made from heavy 14 gauge formed steel.  They can be bolted or rivited on and will fit either left or right side.

    • heavy 14 gauge formed steel
    • fits either left or right rear side
    • bolted or rivited on

     

  • 1930-31 Model A Deluxe Roadster Windshield Frame, Plain
    1930-31 Model A Deluxe Roadster Windshield Frame, Plain
    SKU-55530101
    x
                

    Mr. Roadster '30-'31 Model A Roadster windshield frames for Deluxe bodies feature one-piece steel constructon and have stock Ford dimensions.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1930-31 Model A Deluxe Roadster Windshield Frame, Chrome
    1930-31 Model A Deluxe Roadster Windshield Frame, Chrome
    SKU-55530102
    x
                

    Mr. Roadster '30-'31 Model A Roadster windshield frames for Deluxe bodies feature two-piece steel constructon and have stock Ford dimensions.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1928-29 Model A Roadster Windshield Frame, 2 In Chopped, Chrome Steel
    1928-29 Model A Roadster Windshield Frame, 2 In Chopped, Chrome Steel
    SKU-55528022
    x
                

    Mr. Roadster '28-'29 Model A Roadster Chopped windshield frames feature one-piece constructon and are chopped 2" for a more streamlined appearance.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1928-1929 Model A Closed Car Interior Rear View Mirror
    1928-1929 Model A Closed Car Interior Rear View Mirror
    SKU-92550743
    x
                

    These street rod rear view mirrors work great as 1928-1929 Model A inside mirrors.  They also are intended for use with closed cars.

    • Steel black bracket
    • 1928-1929 Model A inside mirror
    • Closed cars
    • Overall Length: 5.00"
    • Overall Width: 2.75 (2-3/4")
    • Overall Thickness: 0.25" (1/4")
    • Sold in Quantity: Each
  • Threaded Windshield Stud, 1928-36 Ford, 3/8 In X 3/8 In NF X 2 In
    Threaded Windshield Stud, 1928-36 Ford, 3/8 In X 3/8 In NF X 2 In
    SKU-91123102
    x
                

    These threaded windshield studs feature a stop and include one stud and one cone nut. They are zinc plated for longevity. Fits 1928-31 Model A and 1932-36 Ford.

    • Steel material
    • (1) stud, (1) cone nut
    • Sold each

    Not included in our windshield kits.

  • Vintage Hood Strap Buckle, Chrome
    $49.99
    $75.00
    Vintage Hood Strap Buckle, Chrome
    SKU-91102512
    x
                
    • Combine with your own leather strap
    • Early race styling
    • Chrome finish
  • Macs Antique Parts A41563S 30-31 Ford Model A Plain Square Step Plate
    Macs Antique Parts A41563S 30-31 Ford Model A Plain Square Step Plate
    SKU-91129504
    x
                

    Cast aluminum step plate for 1930-31 Ford Model A. Square plate includes a built-in 5/16" stud to mount the plate (with nut and washer). Square plate has a smooth plain cast zinc finish.

  • 1928-29 Ford Model A Windshield Posts, Plain Aluminum
    1928-29 Ford Model A Windshield Posts, Plain Aluminum
    SKU-91656292
    x
                These 1928-29 Ford Model A roadster windshield posts are a cast aluminum one-piece design. Length from end to windshield pivot stud hole is approximately 16-1/2". Length from end to end is approximately 18-3/4".
            
  • 1930-31 Ford Model A Locking Door Handles, Matched
    1930-31 Ford Model A Locking Door Handles, Matched
    SKU-911253031
    x
                

    New and improved offering of the old 911-25204 & 911-25202 part numbers.  These locking 1930-1931 curved mount exterior door handles are offered in matched key pairs to fit either left or right side. They secure to the car door with two screws and a 5/16" attachment shaft.  These door handles are the perfect finishing touch to your stock or modified Model A.  

    • Zinc Material
    • Chrome Finish
    • Sold in pairs
    • 1.20" Shank Length
  • 1928-29 Model A Aluminum Windshield Posts, 2 Inch Chopped
    1928-29 Model A Aluminum Windshield Posts, 2 Inch Chopped
    SKU-91656281
    x
                These street rod/roadster 1928-29 Ford Model A windshield posts are a cast aluminum  one-piece design. Length from end to windshield pivot stud hole is  approximately 14-1/2". Length from end to end is approximately 16-3/4".                                
    • Cast aluminum.
    • Available in plain only
    • 2 Inch chopped
    • Drilling and fitment fabrication required
    • You polish and save!
  • 1928-29 Ford Model A Hood Latch, Stainless
    1928-29 Ford Model A Hood Latch, Stainless
    SKU-91122500
    x
                

    These quality 1928-1929 Ford Model A reproduction hood latches are spring loaded and come in a stainless steel finish.  They feature a three-hole mounting bracket and they mock the original style for a perfect look and latch every time.  This latch mounts to the frame easily with three screws.

    • Three hole mounting bracket 
    • Mounting hole spacing of farthest holes is 1-5/8" center to center
    • Center most hole is 5/8" from center line of other mounting holes
    • From mounting surface to top of main body is 2-1/2"
    • Main body is 2-7/16" long
    • From mounting surface to tip of hold down finger is 3"
    • From mounting surface to inner radius of hold down finger is 3-3/8"
    • From center line of main body to tip of hold down finger is 1-1/2"

     

  • 1930-1931 Ford Model A Closed Car Outside Rear View Mirrors
    1930-1931 Ford Model A Closed Car Outside Rear View Mirrors
    SKU-91123009
    x
                

    These Ford closed car exterior rear view mirrors have an adjustable hinge pin mount. They mount to the outside door hinge with a new pin that replaces the original hinge pin. They are all chrome and feature a 4” diameter mirror head and an 8” arm for good visibility.

    • Works for both left and right sides 
    • 1930-1931 Ford Closed Cars
    • Chrome finish
    • 0 .228" Pin O.D.
    • 1.778" I.D. Opening for Hinge
    • 4" diameter
    • 8" long arm

     

  • 1930-31 Model A Deluxe Roadster Windshield Frame, 2 In Chopped, Chrome
    1930-31 Model A Deluxe Roadster Windshield Frame, 2 In Chopped, Chrome
    SKU-55530122
    x
                

    Mr. Roadster '30-'31 Model A Roadster windshield frames feature one-piece steel constructon and have a 2" chop for a more streamlined appearance. Chrome finish steel for Deluxe bodies.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1930-31 Ford Model A Hood Latch, Black
    1930-31 Ford Model A Hood Latch, Black
    SKU-91122505
    x
                

    These quality reproduction 1930-1931 Model A hood latches are spring loaded and come in a gloss black finish.  They feature a two-hole mounting bracket and they mock the original style for a perfect look and latch every time.  This latch mounts to the frame easily with two screws.

    • Gloss black finish
    • Quality reproduction
    • Spring loaded
    • Two hole mounting bracket
    • Overall Width: 2.150"
    • Overall Height: 3.750" (3-3/4")
    • Mounted Height: 3.000"
    • Centerline of Holes: 1.625" (1-5/8")
  • 1928-1929 Ford Steel Radiator Splash Aprons
    1928-1929 Ford Steel Radiator Splash Aprons
    SKU-91124101
    x
                

    This 1928-29 Ford steel radiator front splash apron has original-style brackets riveted to the sides for attachment.  These brackets have threadnuts welded to those brackets.

    • Width side-to-side at rear of panel is 22-5/8”
    • Width side-to-side at front of panel is 21-1/8”
    • Front to rear at sides is 7-15/16” or nearly 8”
    • Front to rear at center is 6-1/8”
    • Vertical height at sides is 8-1/8”
    • 4 mounting tabs (2 per side) extend 1” past the above dimensions
    • Mounting tabs have nuts welded to them for mounting
    • Mount center side to side horizontal is about 24”
    • Vertical mount spacing is 5-5/8” center to center. (this is approximate because of the angle difference on tabs)
  • 1928-29 Model A Roadster Windshield Frame, Plain Steel
    1928-29 Model A Roadster Windshield Frame, Plain Steel
    SKU-55528001
    x
                

    Mr. Roadster '28-'29 Model A Roadster windshield frames feature one-piece constructon and have stock Ford dimensions.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1932 Ford Open Car Outside Mirror
    1932 Ford Open Car Outside Mirror
    SKU-91133006
    x
                

    These stainless steel outside rearview mirrors are for 1932 Ford open cars (Roadster, Phaeton & convertibles). All mirrors are a stud mount design and have a 4" O.D. mirror.

  • 1928-1929 Model A Dash Rail
    $79.99
    Product Rating: 3.33 Stars
    1928-1929 Model A Dash Rail
    SKU-9002816
    x
                Dash rail is original roadster style, made of fiberglass. Will not fit coupe or sedan. 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1928-29 Model A Roadster Windshield Frame, 2 Inch Chopped, Plain Steel
    1928-29 Model A Roadster Windshield Frame, 2 Inch Chopped, Plain Steel
    SKU-55528021
    x
                

    Mr. Roadster '28-'29 Model A Roadster Chopped windshield frames feature one-piece constructon and are chopped 2" for a more streamlined appearance.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1928-1931 Model A Closed Car Windshield Frame, Plain
    1928-1931 Model A Closed Car Windshield Frame, Plain
    SKU-55528301
    x
                

    Mr. Roadster 1928-31 Ford Model A windshields are made of extruded aluminum. Measures 16" tall, 44-1/2" wide at the bottom, and 45-3/8" wide at the top. These windshields have hinges at the top to allow them to open.

    • '28-'29
      • 5-window
      • Special Sport & Business Coupes
      • Tudor Sedan
      • Sedan Delivery
      • Taxi
      • Station Wagon
      • 2-door Sedan w/ vacuum wiper
      • Closed Cab 1/2 ton Pickup
    • '30-'31
      • Station Wagon
      • Murray Town Sedan
      • Briggs Standard & Deluxe Sedan slant windshield
      • Murray 4-door vertical windshield
      • 5-window & Sport Coupes
      • Tudor Sedan
      • Closed Cab Pickup
      • Sedan Delivery
    Note: No glass or windshield rubber included with these windshield frames.
  • 1928-29 Ford Model A Locking Door Handles, Matched
    1928-29 Ford Model A Locking Door Handles, Matched
    SKU-911252829
    x
                Conveniently packaged with matching Right and Left exterior door handles and keys. These  locking exterior door handles will fit your 1928-29 Ford, Chevy, or  Mopar car.  They feature a flat mount base and attach to the door with  two screws.  These closed car outside handles come in a beautiful chrome  plated finish.
    • 1928-1929 Closed Car Outside Locking Door Handles
    • locking with keys
    • flat mount
    • chrome plated finish
    Note: Uses a 5/16" square shank which has a 3/8" long turned down O.D. of 1/4" which is 1/8" from the end of the shank.

  • 1930-1931 Model A Fender Blenders
    1930-1931 Model A Fender Blenders
    SKU-9003049
    x
                
            
  • 1915-31 Ford Windshield Swivel, Brass
    1915-31 Ford Windshield Swivel, Brass
    SKU-91113111
    x
                

    These windshield swivels are for 1915-1931 Fords with round tubing windshield frames.

    Ford Windshield Swivel

    • Sold each
    • Brass finish

    Windshield Mount Guide (GIF)

  • 1928-1929 Ford Closed Car Outside Mirrors
    1928-1929 Ford Closed Car Outside Mirrors
    SKU-91123005
    x
                

    Each of these outside mirrors has a hinge pin mount. Works for both left and right side applications. Adjustable. 

    Fits 1928-1929 Ford Model A "closed" passenger car.

  • 1926-32 Ford Roadster Door Latch Striker Plate
    1926-32 Ford Roadster Door Latch Striker Plate
    SKU-751B35705
    x
                

    Stock-type latch striker plate for 1926-1932 Ford roadsters. Works well with our LH latch 91115401 and RH latch 91115402.

  • 1928-31 Ford Model A Roadster Windshield Finger Pulls
    1928-31 Ford Model A Roadster Windshield Finger Pulls
    SKU-91123141
    x
                

    Standard equipment and a must for opening and closing the windshield. Chrome plated. Fits Roadster and Phaeton only.

    Note: Reproduction frames are not drilled for finger pulls.

  • 1930-31 Ford Model A Hood Latch, Stainless Steel
    1930-31 Ford Model A Hood Latch, Stainless Steel
    SKU-91122503
    x
                

    These quality reproduction 1930-1931 Ford Model A hood latches are spring loaded and come in a stainless steel finish.  They feature a two-hole mounting bracket and they mock the original style for a perfect look and latch every time.  This latch mounts to the frame easily with two screws.

    • Two hole mounting bracket
    • Spring loaded
    • Stainless steel finish

    NOTE: 1928-31 did not make use of a hood bracket, instead the hood was stamped for the latch. We do offer part #91132503 that does include hood clip.

     

  • Chopped 1928-1929 Ford Steel Radiator Splash Apron
    Chopped 1928-1929 Ford Steel Radiator Splash Apron
    SKU-91124111
    x
                

    This 1928-1929 Ford steel radiator front splash apron has original-style brackets riveted to the sides for attachment. These brackets have thread nuts welded to those brackets. Chopped 3".

    • Width side-to-side at rear of panel is 22-1/2”
    • Width side-to-side at front of panel is 21-1/8”
    • Front to rear at sides is 5-1/2"
    • Front to rear at center is 4"
    • Vertical height at sides is 8-1/4”
    • 4 mounting tabs (2 per side) extend 1” past the above dimensions
    • Mounting tabs have nuts welded to them for mounting
    • Mount center side to side horizontal is about 24”
    • Vertical mount spacing is 5-5/8” center to center. (this is approximate because of the angle difference on tabs)
  • 1930-31 Dash Rail
    $79.99
    1930-31 Dash Rail
    SKU-9003017
    x
                

    30-31 Dash rail

    Overall length side to side is 41 ¼”

    Overall height at the ends is 5 3/8”

    Overall height in the center is 2 ¼”

    Top lip is 1 7/8”

  • 1930-1931 Model A Rear Fender Braces
    1930-1931 Model A Rear Fender Braces
    SKU-3403230
    x
                

    Available for Roadster, Coupe & Pickup or Touring, Sedan & Panel.  For the rear fenders ONLY.

    Note: These braces are designed for use with O/E style fenders only.

  • 1928-29 Ford Model A Fiberglass Hood for Stock Grille
    1928-29 Ford Model A Fiberglass Hood for Stock Grille
    SKU-9002813
    x
                One piece, fiberglass "hot rod" style fiberglass hood for stock grille shell. This hood is an outer skin only and will require fabrication and additional mounting hardware. You may be required to obtain original components for your application.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1928-34 Ford Closed Car Outside Door Handle Pads
    1928-34 Ford Closed Car Outside Door Handle Pads
    SKU-751B702356BS
    x
                

    These exterior door handle pad gaskets are for 1928-31 Model A and 1932-34 Ford closed car door handles. They are made from strong rubber material and fit between the door and the door handle base to protect your door as well as securing a tight seal.

    Sold as a pair.

Goto Previous PagePrevious Page
1 2 3