Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors is the street rodder's source for body parts, gauges, and interior accessories! Find all the essential fiberglass body components, gauge sets by Stewart Warner and Auto Meter, and hot rod bomber seats, in our online catalog. While you are there, check out our full line of script emblems, rear view mirrors, windshields, fiberglass hoods and grilles. Complete your hot rod with sound proof insulation from Dynalite and Hushmat. Don't forget about Speedway's hot rod bomber seats for your traditional street rod, too!

"Street Rod, Model A" Page 1 of 3

New (0)

Garage Sale (0)

  • 1928-31 Model A Front Crossmember
    1928-31 Model A Front Crossmember
    x
                

    These replacement 1928-31 Model 'A' Ford front crossmembers lower a Model A chassis 2" below a stock crossmember. Replaces a cracked original or use it to start your reproduction frame off right. Made of heavy, 7-gauge steel with clearance for 1-3/4" cross spring. Welds to frame boxing plates of original or repro chassis.

  • Threaded Windshield Stud, 1928-36 Ford, 3/8 Inch X 3/8 Inch NF X 2 Inch
    Threaded Windshield Stud, 1928-36 Ford, 3/8 Inch X 3/8 Inch NF X 2 Inch
    x
                

    These threaded windshield studs feature a stop and include one stud and one cone nut. They are zinc plated for longevity. Fits 1928-31 Model A and 1932-36 Ford.

    • Steel material
    • (1) stud, (1) cone nut
    • Sold each

    Not included in our windshield kits.

  • Macs Antique Parts A41563S 30-31 Ford Model A Plain Square Step Plate
    Macs Antique Parts A41563S 30-31 Ford Model A Plain Square Step Plate
    x
                

    Cast aluminum step plate for 1930-31 Ford Model A. Square plate includes a built-in 5/16" stud to mount the plate (with nut and washer). Square plate has a smooth plain cast zinc finish.

  • 1928-34 Ford Closed Car Outside Door Handle Pads
    1928-34 Ford Closed Car Outside Door Handle Pads
    x
                

    These exterior door handle pad gaskets are for 1928-31 Model A and 1932-34 Ford closed car door handles. They are made from strong rubber material and fit between the door and the door handle base to protect your door as well as securing a tight seal.

    Sold as a pair.

  • 1928-29 Ford Model A Front Bumper Clamp
    1928-29 Ford Model A Front Bumper Clamp
    x
                

    These '28-'29 Ford Model A stainless steel bumper clamps are useful and stylish. They bolt to the bumper braces/brackets to firmly secure the front bumper.  They feature blue colored accents and measure 4" long x 2" wide. 

    • Stainless steel finish
    • Firmly secure front bumper
    • Feature blue colored accents
    • Measure: 4" long x 2" wide
    • Two required per car
  • 1928-31 Model A Windshield Rubber, T Style, Closed Car
    1928-31 Model A Windshield Rubber, T Style, Closed Car
    x
                

    1928-31 Model A windshield rubber for closed cars (not supplied with our windshield frames). "T" style windshield rubber seals between the windshield frame and body. Comes with 7 feet of 1" width. Seal is 1" tall from bottom to top of T. Top of T is 1/4" wide.

  • 1915-31 Ford Windshield Swivel, Stainless
    1915-31 Ford Windshield Swivel, Stainless
    x
                

    These windshield swivels are for 1915-1931 Fords with round tubing windshield frames.

    Ford Windshield Swivel

    • Sold each
    • Stainless finish

    Windshield Mount Guide (GIF)

  • 1928-1934 Ford Windshield Pivot Bolt & Nut Set
    1928-1934 Ford Windshield Pivot Bolt & Nut Set
    x
                This polished stainless steel hardware holds the slide arm to the windshield frame on both sides. Fits 1928-1931 Ford Model A closed passenger cars and 1928-1934 Ford pickup trucks.
            
  • 1930-31 Model A Coupe & Roadster Steel Deck Lid
    1930-31 Model A Coupe & Roadster Steel Deck Lid
    x
                

    Made of steel with inner panel. This is a "rumble seat" style lid, meaning that the hinges will be at the bottom and the latch will be at the top.

    Ships UPS oversize. 

  • OTB Gear 6128 1928-32 Ford Dash Gauge Panel Mount
    OTB Gear 6128 1928-32 Ford Dash Gauge Panel Mount
    x
                Like to add gauges (or other things) under your '29  to '32 dash? This item matches the contour of your dash, giving you a  level surface to work with. This unpolished aluminum casting is very  lightly scribed with cutoff lines that match the widths of OTB gear  gauge panels. Simply cut to length, drill to your needs, and polish if  desired. Length is 12". Made in USA. 
    • Matches the contour of your '29-'32 dash to give a flat mounting surface below the dash
    • Aluminum casting is very lightly scribed with cutoff lines that match the widths of OTB gear gauge panels
    • Cut to length
    • 12" stock length
  • 1928-29 Ford Model A Radiator Stone Guard
    1928-29 Ford Model A Radiator Stone Guard
    x
                

    This stone guard for radiators is made of fully polished stainless steel.  Stone guard comes with attachment hardware and rubber cushions.  The guard has tabs for the 4 cushions to isolate it from the grille shell.

  • 1930-31 Model A Fiberglass Firewall
    1930-31 Model A Fiberglass Firewall
    x
                

    This fiberglass firewall features a 3-3/4" deep recession which will allow you to fit late model engines in your '30-'31 Ford Model A.

    Ships UPS Oversize.

  • 1928-31 Model A Luggage Rack
    $99.99
    Product Rating: 5.00 Stars
    1928-31 Model A Luggage Rack
    x
                

    Reproduction Model A luggage rack. Chrome with genuine wood strips protected with an attractive clear finish.

    NOTES:   Item has metric bolts and nuts.

  • 1928-1931 Ford Model A Rumble Seat Hinge Kit
    1928-1931 Ford Model A Rumble Seat Hinge Kit
    x
                

    These are top quality reproduction Model A reproduction 1928-1931 rumble seat hinge kits.  These kits include the special shoulder bolts and washers for rumble seat hinge pivot and screws to secure and mount the deck lid to it's hinges.

    • Fits: 1928,1929,1930,1931 Model A Rumble Seats
    • Complete with hinges, the necessary brackets and hardware
  • Stainless Steel Hood Props
    $29.99
    Product Rating: 4.29 Stars
    Stainless Steel Hood Props
    x
                With rubber coated short and long arms for 1928-1936 Ford and others. Polished, includes all hardware.
            
  • 1928-33 Ford Chrome Inside Door Handle
    1928-33 Ford Chrome Inside Door Handle
    x
                

    These chrome reproduction interior door handles fit 1928-31 Model A and 1932-33 Ford open cars, (except 1932), either left or right side.  They feature a screw cap to cover the attachment shaft.

    • Chrome finish 
    • High quality steel material
    • Overall Length: 3.88"
    • Overall Width: 1.12"
    • Overall Height: .55"
    • Overall Thickness: .44"

    Fits a 5/16" square shaft like the open-car handles for '28-'33 Fords (911-25203).

  • 1928-1929 Ford Model A Steel Running Boards
    1928-1929 Ford Model A Steel Running Boards
    x
                These 1928-1929 Model A runnings boards are complete with rubber mat and stainless trim.
            
  • Steel 1930-31 Ford Model A Radiator Splash Apron, Stock Style
    Steel 1930-31 Ford Model A Radiator Splash Apron, Stock Style
    x
                

    Stock style 1930-31 Ford Model A steel splash aprons for radiators. Measures 5-1/2" below the grille shell when measured at the center.

  • 1928-31 Ford Car and 1928-34 Pickup Windshield Slide Arms
    1928-31 Ford Car and 1928-34 Pickup Windshield Slide Arms
    x
                These die cast, chrome-plated arms let the windshield swing open or closed. Fits 1928-31 Ford Model A passenger car and 1928-34 Ford Pickup.
            
  • 1928-1931 Model A Closed Car Windshield Frame, Plain
    1928-1931 Model A Closed Car Windshield Frame, Plain
    x
                

    Mr. Roadster 1928-31 Ford Model A windshields are made of extruded aluminum. Measures 16" tall, 44-1/2" wide at the bottom, and 45-3/8" wide at the top. These windshields have hinges at the top to allow them to open.

    • '28-'29
      • 5-window
      • Special Sport & Business Coupes
      • Tudor Sedan
      • Sedan Delivery
      • Taxi
      • Station Wagon
      • 2-door Sedan w/ vacuum wiper
      • Closed Cab 1/2 ton Pickup
    • '30-'31
      • Station Wagon
      • Murray Town Sedan
      • Briggs Standard & Deluxe Sedan slant windshield
      • Murray 4-door vertical windshield
      • 5-window & Sport Coupes
      • Tudor Sedan
      • Closed Cab Pickup
      • Sedan Delivery
    Note: No glass or windshield rubber included with these windshield frames.
  • 1928-29 Ford Model A Stock Radiator Grille Shell, Chrome
    1928-29 Ford Model A Stock Radiator Grille Shell, Chrome
    x
                

    Authentic reproduction stamped steel grille shell for 1928-1929 Ford Model A. Has center hood hinge rod bracket installed. Shell is pre-drilled for hood lacing and slotted for attachment to the radiator brackets.

    • Overall height from bottom to top of flange at radiator neck opening is 28”
    • Overall width of radiator opening at widest point is 18-5/8”
    • Overall height of radiator opening at center below eyebrow is also 18-5/8”
    • Width at widest point across front at outside edges is 21-1/4”
    • Widest point at rear not including inset for hood is 22-11/16”
    • Widest point at rear at hood inset is 22-7/16”
    • One 3/4” hole on each side 10-7/8” up from the bottom of side for headlight wiring.
    • One 3/4” hole 4-1/8” up on drivers side for horn wiring
    • Shell is 4" deep

    Unit measures 29" tall and 4" deep.

  • 1928-29 Ford Model A Fender Brace, Front
    1928-29 Ford Model A Fender Brace, Front
    x
                

    These front fender braces are for 1928-29 Model A Ford's and are made from heavy 14 gauge formed steel.  They can be bolted or rivited on and will fit either left or right side.

    • heavy 14 gauge formed steel
    • fits either left or right rear side
    • bolted or rivited on

     

  • 1930-1931 Ford Model A Closed Car Outside Locking Door Handles
    1930-1931 Ford Model A Closed Car Outside Locking Door Handles
    x
                

    These locking 1930-1931 curved mount exterior door handles from Vintique fit either left or right side. They secure to the car door with two screws and a 5/16" attachment shaft.  These door handles are the perfect finishing touch to your stock or modified Model A. 

    • Chrome plated steel
    • Locking with keys included
    • left and right are the same
    • High quality steel material

     

  • Steel 1930-31 Ford Model A Radiator Splash Apron, 3 Inch Chopped
    Steel 1930-31 Ford Model A Radiator Splash Apron, 3 Inch Chopped
    x
                

    Steel 1930-31 Ford Model A splash apron for radiators. Chopped 3". Measures 3" tall at the center from the bottom to the indention lip for the grille shell. If you add the lip behind the grille shell, it is 4-1/8" from the bottom to the top of the lip.

  • 1928-29 Steel Hood Shelves
    $36.99
    1928-29 Steel Hood Shelves
    x
                  Stamped steel reproduction hood shelves.  
            
  • 1915-31 Ford Windshield Swivel, Chrome
    1915-31 Ford Windshield Swivel, Chrome
    x
                

    These windshield swivels are for 1915-1931 Fords with round tubing windshield frames.

    Ford Windshield Swivel

    • Sold each
    • Chrome finish

    Windshield Mount Guide (GIF)

  • 1928-31 Ford Model A Transmission Mount for GM Transmission
    1928-31 Ford Model A Transmission Mount for GM Transmission
    x
                

    Our crossmember kit makes it easy to mount a GM transmission in your '28-'31 Model A frame. This is the same one that you have seen in our assembled "Model A" frames. Transmission mount plate is to be used with a two-bolt transmission mount cushion.

    • 30" wide
    • 2 x 3" Square tubing
    • 8-3/8" from top of tubing to top of plate (top of the crossmember to the trans mount surface)
    • Top of crossmember to mounting holes: 2-7/8"
  • 1928-30 Ford Model A Radiator Emblem
    1928-30 Ford Model A Radiator Emblem
    x
                Made of chrome and blue porcelain, just like original. Oval-shaped with Ford script. Fits 1928, 1929, and 1930 Model A only.
            
  • 1928-31 Ford Closed Car Striker Plate
    1928-31 Ford Closed Car Striker Plate
    x
                

    Striker plate for 1928-1931 Ford closed passenger cars. Works well with universal latch 910-52851.

  • 1928-1933 Ford Open Car Outside Door Handle
    1928-1933 Ford Open Car Outside Door Handle
    x
                

    These chrome reproduction exterior door handles fit 1928-1931 Model A and 1932-1933 Ford Roadster and Phaeton open top cars, either left or right side. They secure to the car door with two screws and a 5/16" attachment shaft.

    • Chrome plated steel
    • Left and right are the same
    • High quality steel material
  • 1930-31 Ford Model A Fiberglass Hood for 1932 Grille
    1930-31 Ford Model A Fiberglass Hood for 1932 Grille
    x
                

    Constructed of heavy wall fiberglass at Speedway's own facility. This is an outer skin only - may require fabrication and mounting hardware. You may need to obtain original components for your application.

  • 1930-31 Ford Model A Steel Fender Brace, Left or Right Side
    1930-31 Ford Model A Steel Fender Brace, Left or Right Side
    x
                

    These front fender braces are for 1930-31 Model A Ford's and are made from heavy 14 gauge formed steel.  They can be bolted or rivited on and will fit either left or right side. These fender braces mock original specs.

    • OEM quality specs
    • Heavy 14 gauge formed steel
    • Fits either left or right side
    • Bolted or rivited on
    • Sold each
  • 1928-1929 Model A Auburn Style Dash
    1928-1929 Model A Auburn Style Dash
    x
                        Made of fiberglass.   

    Auburn style dash attaches with screws or can be molded in place.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1928-29 Ford Model A Filled Radiator Grille Shell
    1928-29 Ford Model A Filled Radiator Grille Shell
    x
                Beautiful grille shell for 1928-1929 radiators. Exact duplicates of original, except crank hole and top radiator fill hole has been filled. 29"  tall. Stamped steel.  Available in unplated.
            
  • 1928-31 Ford Model A Frame Rails
    1928-31 Ford Model A Frame Rails
    x
                
    • '28-'31 Ford rails
    • Laser cut from 11 gauge pickled and oiled steel plate
    • Welded on a rail fixture
    • Ground and sanded with 50 grit
  • 1928-1929 Ford Open Car Outside Mirror
    1928-1929 Ford Open Car Outside Mirror
    x
                

    These stainless steel outside rearview mirrors are for 1928-1929 Model A Roadster, Phaeton & convertible open top cars. All mirrors are a stud mount design and have a 4-1/8" O.D. mirror.

  • 1928-1931 Model A Vicky Windshield Frame, Plain
    1928-1931 Model A Vicky Windshield Frame, Plain
    x
                

    Mr. Roadster Ford Model A windshields are made of extruded aluminum. Measures 14-5/8" tall, 45-3/8" wide at the top, and 44-1/2" wide at the bottom. These windshields have hinges at the top to allow them to open.

    Fits the following '28-'31 Ford models:

    • Victoria
    • Cabriolet
    • Town and Convertible Sedans
    • Standard and Deluxe 4-door Briggs Body Sedan slant windshield


    Note: No glass or windshield rubber included with our windshield frames.

  • 1928-29 Model A Roadster Windshield Frame, Chrome Steel
    1928-29 Model A Roadster Windshield Frame, Chrome Steel
    x
                

    Mr. Roadster '28-'29 Model A Roadster windshield frames feature one-piece constructon and have stock Ford dimensions.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1930-31 Model A Standard Roadster Windshield Frame, 2 Inch Chopped, Plain
    1930-31 Model A Standard Roadster Windshield Frame, 2 Inch Chopped, Plain
    x
                

    Mr. Roadster '30-'31 Model A Roadster windshield frames feature one-piece steel constructon and have a 2" chop for a more streamlined appearance. Plain finish steel for Standard bodies.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1930-31 Model A Deluxe Roadster Windshield Frame, Plain
    1930-31 Model A Deluxe Roadster Windshield Frame, Plain
    x
                

    Mr. Roadster '30-'31 Model A Roadster windshield frames for Deluxe bodies feature one-piece steel constructon and have stock Ford dimensions.

    Note: No glass or windshield rubber included with our windshield frames.

Goto Previous PagePrevious Page
1 2 3