Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Electrical Wiring & Lights At Speedway Motors

Speedway Motors is your one stop shop for hot rod wiring and lighting. Make wiring your hot rod simple with easy to use wiring harnesses and step by step instructions. Finally finish off your street rod project with specialty headlights, LED dome lights, and blue dot glass tail lights. Find anything on the online catalog and let Speedway Motors eliminate any and all of your hot rod electrical system problems!

"Street Rod, Lighting, Exterior" Page 1 of 10

  • Tall Model T Cowl-Tail Lights, Black
    Tall Model T Cowl-Tail Lights, Black
    x
                

    Features a 12 volt dual element bulb and can be used as a tail light or a cowl light. 9-1/2" tall with 3" diameter lens. Specify red or amber lens.

    Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

    Cowl Light Installation Instructions (PDF)

  • 1928-29 Dropped Stainless Headlight Bars
    1928-29 Dropped Stainless Headlight Bars
    x
                1928-1929 Dropped style stainless steel headlight bars. Polished. 

    Top width (flange tip to flange tip) 42-1/2"
    Bottom width (flange tip to flange tip) 38-1/2"
  • Universal Headlight Mount
    $19.99
    Product Rating: 4.75 Stars
    Universal Headlight Mount
    x
                
    • 5/16" mounting holes 2" center to center
    • 1/2" ID sleeve for light mounting bolt
    • Great for headlights and taillights
    • Use with mounting cups 91061034
  • 1932 Ford Tail Light Bracket, Chrome
    1932 Ford Tail Light Bracket, Chrome
    x
                

    These 1932 Ford tail light brackets are stamped steel reproductions. They feature a beautiful chrome plated finish. Choose left or right side.

    • 1932 Ford passenger cars
    • Chrome plated finish
    • Stamped steel reproductions
    • Specify left or right side
  • 1954 Chevy Tail Light Chrome Bezel with Screws
    1954 Chevy Tail Light Chrome Bezel with Screws
    x
                These tail light bezels for 1954 Chevy passenger cars replicate those of the original and feature a chrome plated finish. 
    • Beautiful chrome plated die cast bezel
    • Comes with 6 mounting screws
    • Duplicate of original
    • Left or Right Side
    • Fits All Passenger Cars 
  • Stainless License Plate Light
    Stainless License Plate Light
    x
                
    • Fully polished stainless steel housing
    • 12 volt operation
    • Mounting hardware included
    • Uses common replaceable wedge-type dashlight bulb
  • Universal Specialty Light, Double Filament Bulb, Amber Lens
    Universal Specialty Light, Double Filament Bulb, Amber Lens
    x
                

    Double filament bulbs work great for custom taillights, brake or turn signals. Chrome housing measures 2-1/2" long and 1-3/4" wide. Wires feed through a 3/8” bolt that threads into the main housing. The chrome washer and rubber washer are 7/8” O.D.

    This accessory light uses double filament replacement bulb 316-2012.

  • 1926-27 T Headlamp Plug
    $21.99
    1926-27 T Headlamp Plug
    x
                

    This plug fits into the headlamp socket. The round part covers the wire ends. Double contact. Will fit most 1915-1927 headlamps but is intended for use with our '26-'27 lamps 911-12012.

  • 1930-31 Ford Model A Dropped Headlight Bar, Stainless
    1930-31 Ford Model A Dropped Headlight Bar, Stainless
    x
                

    These dropped style stainless steel headlight bars are for 1930-1931 Fords.  They feature a 4 inch drop and connect fender to fender to support your headlights, just like the originals.  These bars come with a highly polished stainless finish.

    • 1930-31 Fords
    • Top width (flange tip to flange tip) 43"
    • Bottom width (flange tip to flange tip) 38-3/4"
    • 43-1/8" Long
    • OEM # A-13114-BD
    • Highly Polished Stainless Steel 4" Dropped Headlight Bars for Street Rods

    Note: If you intend to use this light bar on your 1930-31 Model "A" using a 1932 grille shell and insert, it will require considerable modification. The 1932 grille insert has a "V" shape, while the 1931 grille does not. The modifications required include cutting, welding, bending and polishing.

  • 1938-1939 Ford Tail Light Frenching Bucket
    1938-1939 Ford Tail Light Frenching Bucket
    x
                

    These all steel buckets allow you to "French" your 1938-1939 Ford tail lights into the body. Welding & bodywork required.

    1938-1939 Ford Tail Light Installation Instructions (PDF)

  • Model T Cowl or Tail Light Brackets for 9-1/2 Inch Lamp
    Model T Cowl or Tail Light Brackets for 9-1/2 Inch Lamp
    x
                

    Mounts to side of 9-1/2" tall lamps and any flat surface. Conceals wiring. Available in brass or chrome.

    Note: This is the bracket only (hardware NOT included).

  • Headlight Cone Mounting Cups
    Headlight Cone Mounting Cups
    x
                Headlight cone mounting cups for universal headlight mount 91061026.
            
  • LED 1157 Tail Light Bulb, 1 Inch, Red
    LED 1157 Tail Light Bulb, 1 Inch, Red
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The bulbs appear to be clear, but are red when illuminated.

    LED taillight bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LEDs will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.)

     

  • 12 Volt 7 Inch Round Hi/Low Sealed Beam Headlight, Replacement Bulb
    12 Volt 7 Inch Round Hi/Low Sealed Beam Headlight, Replacement Bulb
    x
                

    12 Volt Round 7" sealed beam hi/low replacement headlight for 7" Dietz type headlight.

    These sealed beams feature custom-designed glass lenses that are manufactured to each specific application.  They use a non-reflective bottom shelf for increased lamp effectiveness in rain, snow, and fog.  A special grinding process on the aiming pads forms a perfect plane, making headlight aiming an easy process.  They feature high-grade brass terminals and a glass exhaust tube.

    This is a replacement headlight for the standard 7” Dietz type, seal beam number 6014.

    Hi/Low Replacement Headlight

    • Round,  7" O.D. 
    • 12 Volt

     

  • LED Cat Eye Tail Light
    $39.99
    Product Rating: 4.73 Stars
    LED Cat Eye Tail Light
    x
                

    This 12-volt, 12-LED tail light can be used as a stop/turn/tail or just use as a third stop light. Measures 7.25" long x 1-50" tall x .730" thick with a chrome bezel. Light is flat on the back side and comes with a mounting gasket.

    10-32 mounting bolts (not) included.

    LED Cat Eye Tail Light Installation Instructions (PDF) 

  • 1928-1931 Ford Model A Stainless Tail Lights
    1928-1931 Ford Model A Stainless Tail Lights
    x
                

    Polished stainless steel housing with glass lenses. An excellent replacement or addition to your Model 'A' Ford. Left tail light has lenses on the bottom to illuminate a license plate. Choose left or right. 12 volt operation.

    • 3.851" diameter
    • 3" depth
    • 3.851" height
    • 1-3/4" mount 

    Wire colors:

    • Housing - Ground
    • Tail - Black
    • Stop - Green

    These tail lights have two bulbs in them that are of a single filament style. 

  • 1932 Ford Headlight Bar Bolt, Stainless
    1932 Ford Headlight Bar Bolt, Stainless
    x
                

    Headlight bar bolt for 1932 Ford. Measures 1.700" from shoulder to the end of the threads. Thread length is 1.185".

    Sold each.

  • Universal Specialty Light, Single Filament Bulb, Amber Lens
    Universal Specialty Light, Single Filament Bulb, Amber Lens
    x
                

    Light features a 12 volt single filament bulb with a chrome 1-3/4" long x 1-1/4" wide housing. Mounting stud diameter is 3/8".

    This accessory light uses single filament replacement bulb 316-2089.

  • 1951-1952 Chevy Tail Light Lens Gasket
    1951-1952 Chevy Tail Light Lens Gasket
    x
                

    Fit these tail light gaskets in between the tail light and the bezel/fender on your 1951-1952 Chevy passenger car. They feature quality cork material to protect your fender and finish.

    • Cork gasket
    • Left or Right Side
    • Fits All Passenger Cars
  • 1953 Chevy Park Light Lens, Clear Glass
    1953 Chevy Park Light Lens, Clear Glass
    x
                These clear glass lens for 1953 Chevy passenger cars feature original  style lens pattering.  They fit the factory housing and are a direct  replacement for your old damaged or missing park light lens.
    • Clear glass lens with original style lens patterning
    • "GUIDE"" script
    • Fits factory housing
    • Left or Right Side
    • Fits All Passenger Cars
  • Interior-License Plate Light
    Interior-License Plate Light
    x
                Chrome plated. 12 volt. Measures 1-1/4" diameter. 
            
  • Replacement Lens for Tri-Bar Headlights 91101004
    Replacement Lens for Tri-Bar Headlights 91101004
    x
                

    These replacement tri-bar headlight lens feature a 7" diameter. Curved lens is fluted for superior driving vision. They are replacement for our tri-bar headlight assemblies (91101004).

    • 7" diameter
    • Curved lens is fluted for superior driving vision
    • Replacement for tri-bar headlight (91101004)
  • 1938-39 Ford Red LED Tail-Stop Lights
    1938-39 Ford Red LED Tail-Stop Lights
    x
                

    Each of these complete 1938-39 Ford LED taillights are optimized for visibility and proper fit on the car. Taillights include a pressure cast polished stainless bezel, glass lens, and stainless steel hardware.

    • 28 super-bright LEDs
    • Glass lens
    • Epoxy coated, fully-sealed electronics
    • Stainless steel rim and black housing 

    911-37014 Instructions (PDF)

  • Lokar HL-1900 Anchor-Tight Stainless Steel Headlight Braid
    Lokar HL-1900 Anchor-Tight Stainless Steel Headlight Braid
    x
                

    No, this is not just another headlight conduit! This is Lokar's design technology for "U-Cut-to-Fit", non-kinking stainless steel headlight braid. Designed with threaded steel studs to insure that you won't experience any of the typical separation between braid and fitting that shows unsightly wires out in the open. Pull, tug or bump your headlight braid and it will stay in place, leaving you with protected wires and a clean set up. Kit comes complete with two 14" flexible braided stainless steel Teflon-lined housings, threaded STEEL studs, billet aluminum fittings, aluminum grill shell washers and four 26" headlight wires.

    • Non-kinking stainless steel
    • Threaded steel studs to insure no separation between braid and fitting
    • Comes complete with:
      • (2)Two 14" flexible braided stainless steel Teflon-lined housings
      • Threaded STEEL studs
      • Billet aluminum fittings
      • Aluminum grill shell washers
      • (4)Four 26" headlight wires
  • Black Deitz Type 7 Inch Headlight Bucket
    Black Deitz Type 7 Inch Headlight Bucket
    x
                
    • Universal application headlight bucket
    • Accepts 7" diameter headlights
    • Black painted steel
  • Eyelid Headlight Trim
    $8.99
    Product Rating: 5.00 Stars
    Eyelid Headlight Trim
    x
                This eyelid trim fits 7" diameter, sealed beam head lamps (6 or 12 volt) as used by most 2- headlamp systems, 1940 and newer.  Each is constructed of chrome plated steel and fits under the edge of the headlamps' retaining ring. Installs in minutes with simple hand tools. 

    Great for cars, truck, motorcycles, anything with 7" round, sealed beam headlamps!

    Cat Eyes and Eyelids, while not recommended for highway use, only slightly affect actual light output.

  • Windshield Stop Light Prism
    $9.99
    Product Rating: 3.61 Stars
    Windshield Stop Light Prism
    x
                Whether you're running a chopped coupe or just looking for that nostalgic look......you gotta get one of these stop light prisms!  Just mount it on your windshield and you can see the traffic light without breaking your neck. Traffic light viewer attaches to your windshield with the suction cup base.
            
  • Headlight Trim Rings, 1940 Ford/Mercury Deluxe, 1940-41 Ford Pickup, Chrome
    Headlight Trim Rings, 1940 Ford/Mercury Deluxe, 1940-41 Ford Pickup, Chrome
    x
                These chrome headlight rims are reproductions designed to fit 1940 Ford/Mercury passenger cars and 1940-41 Ford pickup trucks. 
    • Original replacements
    • Chrome plated
    • 12" x 9-1/2"
    • Fits:
      • 1940 Deluxe
      • 1940-1941 Pickup
      • 1940 Mercury

    Be sure to include our park lamp lens and gasket sets with these headlamp bezels. 

  • Sequential LED Tail Light Kit
    Sequential LED Tail Light Kit
    x
                
    • Convert any three LED tail lights to sequential operation
    • Also upgrades Speedway Motors brand 1969 Camaro and 1967-'69 Mustang LED tail lights to three sequence
    • Three segment sequence with "all-at-once" brake light
    • Kit includes two modules, wires, connectors and instructions

    Sequential LED Tail Light Wiring Instructions (PDF)

  • 1953 Chevy Back-Up Lens, Clear Plastic
    1953 Chevy Back-Up Lens, Clear Plastic
    x
                These clear plastic lens for 1953 Chevy passenger cars    feature original   style lens pattering.  They fit the factory housing    and are a direct   replacement for your old damaged or missing back-up   lens.
    • Lower, Clear Plastic Lens 
    • Original style lens patterning
    • "Guide" Script
    • Fits factory housing
    • Left or Right Side
    • Fits All Passenger Cars
    • Official Licensed Product of GM
  • Replacement LED Bulb For Guide 682-C Headlight
    Replacement LED Bulb For Guide 682-C Headlight
    x
                
    • For 682-C headlight
    • 5 led dual function top mount light
    • Amber led/clear lens
    • Same as used in 911-01020 series headlights

    Dual function 5 led light features one low function circuit (low brightness) and one high function circuit (high brightness)

  • Blue Dots
    $5.99
    Blue Dots
    x
                Chrome steel surrounding a blue glass lens.
            
  • 1938-1939 Ford LED Conversion Stop/Tail Light Lens
    1938-1939 Ford LED Conversion Stop/Tail Light Lens
    x
                

    Lens with a built-in LED cluster for 1938-1939 Ford taillight. Red lens only - no bezel. Plugs into existing taillight housing socket.

    • 47 Super Bright Red LEDs, Complete with Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards are Designed for 7.7 - 14.0 VDC
    • DOT/SAE Certified

    911-37012 Instructions (pdf)

  • Quartz Halogen Headlight Conversion Kit
    Quartz Halogen Headlight Conversion Kit
    x
                

    Are you wanting to run a set of vintage headlights on your car or truck, but are wondering how to make them work again? This kit will solve the problem! Simply remove the existing socket from the reflector and drill out the hole to 1" in diameter. Then install the new 12 volt H-4 quartz halogen bulb into your reflector and secure it with the included press nut and retainer clip. After wiring up the new connectors, you'll be ready to ride.

    Complete kit comes with 2 halogen bulbs, adaptors, hardware and instructions. Fits most stock headlights.

    • Keep factory/vintage appearance with greatly improved lighting
    • Convenient solution for 6 volt to 12 volt electrical system upgrades
    • Features modern H-4 quartz halogen bulbs
    • 60 watt high beam, 55 watt low beam
    • Fits most headlight housings

    911-21001 Instructions (PDF)

  • 1950 Pontiac Tail Light Mount Gasket
    1950 Pontiac Tail Light Mount Gasket
    x
                

    These '50 Pointiac tailmount gaskets will protect your 1950 Pontiac tail light from dirt, moisture, scratches, and corrosion with this original-style, quality black rubber reproduction gasket. 

    • Tail light-to-body mount gasket 
    • 1950 Pontiac passenger cars
    • OEM style replacement
    • High quality black rubber
    • Protects tail light and paint from scratches, moisture, and dirt
  • Cat Eye Headlight Trim
    $10.99
    Product Rating: 5.00 Stars
    Cat Eye Headlight Trim
    x
                The past comes roaring back with these accents from days gone by! This cat eye trim fits 7" diameter, sealed beam head lamps (6 or 12 volt) as used by most 2-  headlamp systems, 1940 and newer.  Each is constructed of chrome plated steel and fits under the edge of the headlamps' retaining ring. 

    Installs in minutes with simple hand tools. Great for cars, truck, motorcycles, anything with 7" round, sealed beam headlamps!

    Cat Eyes and Eyelids, while not recommended for highway use, only slightly affect actual light output.

  • Billet Aluminum LED Third Brake Light
    Billet Aluminum LED Third Brake Light
    x
                Wire this third brake light in conjunction with tail lights. Billet aluminum with red lens. 

    This LED third brake light is 2" tall and 7" wide. There is one wire coming through the base for power. A ground wire would be attached to the bottom of the mounting bolts at the base.


  • 1953 Chevy Parking Light Bezel, Chrome
    1953 Chevy Parking Light Bezel, Chrome
    x
                These parking light bezels for 1953 Chevy passenger cars replicate those of the original and feature a chrome plated finish. 
    • Chrome plated bezel
    • Duplicate of original
    • Left or Right Side
    • Fits All Passenger Cars 
  • Dummy Spot Non-Functional Spot Light
    Dummy Spot Non-Functional Spot Light
    x
                This well proportioned Appelton-style spot light features a sleek chrome plated steel body with a fully adjustable head. The spotlight comes complete with a mounting bracket and a flush 5" diameter lens. Fits left hand or right hand side of car.
            
  • 1928-29 Ford Model A Headlight Bar Rubber Pads
    1928-29 Ford Model A Headlight Bar Rubber Pads
    x
                

    These pads fit between the headlight bar and the fender to protect the paint on your '28-'29 Ford Model A. They are typically not visible when properly installed. They feature quality rubber construction with no bead lip.

    • Protects your Model A fender
    • Not visible when properly installed
    • Quality rubber construction with no bead lip
Goto Previous PagePrevious Page
1 2 3 4 5 ... 10