Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Body, Interior & Gauges At Speedway Motors

Speedway Motors is the street rodder's source for body parts, gauges, and interior accessories! Find all the essential fiberglass body components, gauge sets by Stewart Warner and Auto Meter, and hot rod bomber seats, in our online catalog. While you are there, check out our full line of script emblems, rear view mirrors, windshields, fiberglass hoods and grilles. Complete your hot rod with sound proof insulation from Dynalite and Hushmat. Don't forget about Speedway's hot rod bomber seats for your traditional street rod, too!

"Street Rod, Hood" Page 1 of 3

  • Shelby GT 500 Hood Scoop
    $89.99
    Shelby GT 500 Hood Scoop
    (Part #9001355)
    x
                Reproduction of the Shelby Mustang GT500 hood scoop. This universal hood scoop is made of heavy duty fiberglass for both street and race applications. Designed for easy installation, our universal hood scoops feature a glossy gelcoat finish and are ready for paint preparations. 

    This is a universal hood scoop and will work for multiple applications, but will require some fitting and body work. Fiberglass and body filler would be required to make a perfect installation.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.

  • 1932 Ford Hood Latch, Black
    $3.99
    Product Rating: 4.50 Stars
    1932 Ford Hood Latch, Black
    (Part #91132501)
    x
                

    This is a reproduction rams horn handle for 1932 Fords. The latch comes with the hood side catch and all necessary hardware as well.

    • Overall Height: 4"
    • Spring loaded
    • Reproduction for 1932 Fords 
    • Includes hood side catch and hardware
  • ZL-1 Corvette Fiberglass Hood Scoop
    ZL-1 Corvette Fiberglass Hood Scoop
    (Part #9001373)
    x
                

    Universal hood scoop made of heavy duty fiberglass for both street and race applications. Designed for easy installation, our universal hood scoops feature a glossy gelcoat finish and are ready for paint preparations. Commonly used as a gasser style hood scoop.

    Ships UPS oversize.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.

  • Pro Stock Hood Scoop, 40 x 23-1/2 x 4-1/2 Inch
    Pro Stock Hood Scoop, 40 x 23-1/2 x 4-1/2 Inch
    (Part #9001362)
    x
                Universal hood scoop made of heavy duty fiberglass for both street and race applications. Designed for easy installation, our universal hood scoops feature a glossy gelcoat finish and are ready for paint preparations. Commonly used as a gasser style hood scoop.

    NOTE: Scoop is shipped filled. Builder/installer will need to cut front air-entry hole as necessary. 

    Ships UPS oversize. This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Pro Stock Hood Scoop, 32 x 21-1/2 x 5-1/2 Inch
    Pro Stock Hood Scoop, 32 x 21-1/2 x 5-1/2 Inch
    (Part #9001363)
    x
                Universal hood scoop made of heavy duty fiberglass for both street and race applications. Designed for easy installation, our universal hood scoops feature a glossy gelcoat finish and are ready for paint preparations. 

    Ships UPS oversize.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1932 Ford Fiberglass Hood, 5/8 Inch Longer
    1932 Ford Fiberglass Hood, 5/8 Inch Longer
    (Part #97693108)
    x
                One piece fiberglass hood with side flange. Top only, no sides. This is an outer skin only and will require fabrication and additional mounting hardware. You may be required to obtain original components for your application. Features a glossy gelcoat finish that is ready for paint preparations.  The hood may require some trimming to fit your body and to achieve your desired  panel gaps.      

    Ships UPS oversize.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Quik-Latch Products QL-25-B Mini Quik-Latch Mounting Cup Bracket
    Quik-Latch Products QL-25-B Mini Quik-Latch Mounting Cup Bracket
    (Part #91007157)
    x
                

    Mounting cup for Mini Quik-Latch is used to mount the stud underneath the panel. Mounting cup can be easily riveted or bolted to the back side of any panel.

    Works great for:

    • T-Bucket bed covers
    • Hood pins
    • Deck lids
    • Air cleaner stud
    • Removeable body panels

    Note:  Photo at left is shown for installation reference only.

  • Utility Cable
    $9.99
    Product Rating: 5.00 Stars
    Utility Cable
    (Part #91126114)
    x
                This is a 6' control cable that can be used as a choke cable, hood or trunk release, and various other applications. The knob is approximately 1" in diameter with a satin finish.
            
  • Stingray Corvette Style Fiberglass Hood Scoop
    Stingray Corvette Style Fiberglass Hood Scoop
    (Part #9001375)
    x
                

    This universal Corvette Singray style hood scoop is made of heavy duty fiberglass and is suitable for both street and race applications. Designed for easy installation, Speedway hood scoops feature a glossy gelcoat finish and are ready for paint preparations.

    This universal hood scoop measures 22" from the outside of the flange to the outside of the the flange at the widest point. The length is 36" front to back, the height is 3" at the tallest point. Ships oversize UPS.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Reverse Teardrop Hood Scoop
    $69.99
    Product Rating: 5.00 Stars
    Reverse Teardrop Hood Scoop
    (Part #9001360)
    x
                

    Universal hood scoop made of heavy duty fiberglass for both street and race applications. Designed for easy installation, our universal hood scoops feature a glossy gelcoat finish and are ready for paint preparations. Hood scoop has original ford Thunderbolt design in a classic mid-60's muscle car style.

    36" x 23-1/2" x 3-1/4"

    Ships UPS oversize.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Steel Hood Pin Kit with Q-Clips
    Steel Hood Pin Kit with Q-Clips
    (Part #5501017)
    x
                Hood pin kit contains two 1/2" chrome plated steel studs, two steel scuff plates, four nuts, and two flip-over Q-clip pins.
            
  • Vintage Hood Strap Buckle, Chrome
    $49.99
    $75.00
    Vintage Hood Strap Buckle, Chrome
    (Part #91102512)
    x
                
    • Combine with your own leather strap
    • Early race styling
    • Chrome finish
  • Mini Shelby GT 350 Style Hood Scoop
    Mini Shelby GT 350 Style Hood Scoop
    (Part #9001304)
    x
                Smaller-sized reproduction of the Shelby Mustang GT350 universal hood scoop. Made of heavy duty fiberglass for both street and race applications. Designed for easy installation, our hood scoops feature a glossy gelcoat finish and are ready for paint preparations. 

    This is a universal hood scoop and will work for multiple applications, but will require some fitting and body work. Fiberglass and body filler would be required to make a perfect installation.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.

  • 1928-29 Ford Model A Hood Latch, Stainless
    1928-29 Ford Model A Hood Latch, Stainless
    (Part #91122500)
    x
                

    These quality 1928-1929 Ford Model A reproduction hood latches are spring loaded and come in a stainless steel finish.  They feature a three-hole mounting bracket and they mock the original style for a perfect look and latch every time.  This latch mounts to the frame easily with three screws.

    • Three hole mounting bracket 
    • Mounting hole spacing of farthest holes is 1-5/8" center to center
    • Center most hole is 5/8" from center line of other mounting holes
    • From mounting surface to top of main body is 2-1/2"
    • Main body is 2-7/16" long
    • From mounting surface to tip of hold down finger is 3"
    • From mounting surface to inner radius of hold down finger is 3-3/8"
    • From center line of main body to tip of hold down finger is 1-1/2"

     

  • Lokar XTR-1200U Midnight Series Trunk Release Cable Kit, Black Housing
    Lokar XTR-1200U Midnight Series Trunk Release Cable Kit, Black Housing
    (Part #491XTR1200U)
    x
                
    • Kit comes complete with billet aluminum handle assembly and cables.
    • The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire.
    • Trunk release kit includes cable stop and 15 feet of outer housing and 16 feet of inner wire.
    • Requires cable-operated latches.
  • Lokar XCHT-1300HT Midnight Series Combo Hood/Trunk Release Cable Kit
    Lokar XCHT-1300HT Midnight Series Combo Hood/Trunk Release Cable Kit
    (Part #491XCHT1300HT)
    x
                

    Billet aluminum handle assembly for both the hood and trunk. The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with aluminum fittings and stainless steel inner wire.

    • Hood release includes aluminum firewall fittings and cable stop.
    • Outer housing is 18 inches inside the vehicle and 6 feet under the hood.
    • Inner wire is 9 feet long.
    • Trunk release includes cable stop and the outer housing is 15 feet long and the inner wire is 16 feet long.
    • Requires cable-operated latches.
  • Tunnel Ram III Fiberglass Hood Scoop
    Tunnel Ram III Fiberglass Hood Scoop
    (Part #9001303)
    x
                

    "Tunnel ram" universal hood scoop made of heavy duty fiberglass. Designed for easy installation, our universal hood scoops feature a glossy gelcoat finish and are ready for paint preparations.

  • 1930-31 Ford Model A Hood Latch, Black
    1930-31 Ford Model A Hood Latch, Black
    (Part #91122505)
    x
                

    These quality reproduction 1930-1931 Model A hood latches are spring loaded and come in a gloss black finish.  They feature a two-hole mounting bracket and they mock the original style for a perfect look and latch every time.  This latch mounts to the frame easily with two screws.

    • Gloss black finish
    • Quality reproduction
    • Spring loaded
    • Two hole mounting bracket
    • Overall Width: 2.150"
    • Overall Height: 3.750" (3-3/4")
    • Mounted Height: 3.000"
    • Centerline of Holes: 1.625" (1-5/8")
  • Lokar TR-1200HT Trunk Release Cable Kit, Stainless Housing
    Lokar TR-1200HT Trunk Release Cable Kit, Stainless Housing
    (Part #491TR1200HT)
    x
                
    • Kit comes complete with billet aluminum handle assembly and cables.
    • The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire.
    • Trunk release kit includes cable stop and 15 feet of outer housing and 16 feet of inner wire. Requires cable-operated latches.
  • 1934 Ford Fiberglass Hood
    $199.99
    1934 Ford Fiberglass Hood
    (Part #9003414)
    x
                

    One piece top with side reveal puff line.  Fiberglass construction.

    Note: This hood is an outer skin only and will require fabrication and additional mounting hardware.  You may be required to obtain original components for your application.

    The slot and round hole at the front of the hood as pictured, that originally was for part of the grille shell and radiator cap, is not cut out. It is marked so the customer can cut it or do a little finish work and eliminate it for a custom application. 

    • The center body line is 35-3/8" long
    • Overall length at center line is 42-1/4"
    • Overall side length is 46"
    • Overall width at rear is approximately 45-1/2"
    • Overall width at front is approximately 19"

    There is no inner structure in this hood, it is the outer shell only. There is no body puff line in the grille and radiator cap area like OEM hoods. 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1932 Lo-Boy Hood Top & Sides
    $279.99
    1932 Lo-Boy Hood Top & Sides
    (Part #97693113)
    x
                This kit includes a fiberglass hood top and two fiberglass side panels which roll under the frame. Hood measures 32-5/8". Fits Speedway 1932 Lo-Boy.
            
  • 1933-34 Ford Pickup Smooth Hood Top
    1933-34 Ford Pickup Smooth Hood Top
    (Part #9003446)
    x
                

    One piece, with original body puff line. No center hinge seam. Fiberglass construction.

    • 30-3/4" front to back at the center
    • 32-1/4" front to back at the sides

    Note: This hood is an outer skin only and will require fabrication and additional mounting hardware.  You may be required to obtain original components for your application.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Lokar X0401014 Midnight Series Adjustable 3 Level Hood and Trunk Prop
    Lokar X0401014 Midnight Series Adjustable 3 Level Hood and Trunk Prop
    (Part #491X0401014)
    x
                

    SEMA Best New Accessory Product Constructed of high quality billet aluminum and stainless steel, this Adjustable-Level Hood and Trunk Prop will offer great looks, as well as functionality to your ride.

    • When the hood or trunk is raised, the Hood and Trunk Prop will automatically lock itself into position.
    • This eliminates the need for two hands when opening your hood or trunk.
    • A quick release allows the hood to be opened to its max for easy engine access.
    • Each level of the three-level prop increases the opening of the hood or trunk by approximately 12 inches.
  • Lokar 0401014 3-Position Adjustable Hood Prop, Polished
    Lokar 0401014 3-Position Adjustable Hood Prop, Polished
    (Part #491401014)
    x
                

    Constructed of high quality aluminum and stainless steel, this adjustable hood prop offers great looks as well as functionality. When the hood is raised, the hood prop will automatically lock itself into position. A quick release allows the hood to be opened to its max for easy engine access. It also allows the hood to be set at various levels without unsightly objects holding it up. Each level increases the opening of the hood by approximately 12".

    Collapsed:  15-1/4"

    Extended:  19-3/4"

    Level Spacing:  2-1/4"

  • 1930-31 Ford Model A Hood Latch, Stainless Steel
    1930-31 Ford Model A Hood Latch, Stainless Steel
    (Part #91122503)
    x
                

    These quality reproduction 1930-1931 Ford Model A hood latches are spring loaded and come in a stainless steel finish.  They feature a two-hole mounting bracket and they mock the original style for a perfect look and latch every time.  This latch mounts to the frame easily with two screws.

    • Two hole mounting bracket
    • Spring loaded
    • Stainless steel finish

    NOTE: 1928-31 did not make use of a hood bracket, instead the hood was stamped for the latch. We do offer part #91132503 that does include hood clip.

     

  • GM-Style Fiberglass Hood Scoop, 33 x 20 x 7 Inch
    GM-Style Fiberglass Hood Scoop, 33 x 20 x 7 Inch
    (Part #9001311)
    x
                

    GM-style universal hood scoop made of heavy duty fiberglass. Designed for easy installation, our universal hood scoops feature a glossy gelcoat finish and are ready for paint preparations.

  • Trunk or Hood Latch Assembly, Male Component
    Trunk or Hood Latch Assembly, Male Component
    (Part #91126112)
    x
                These trunk or hood latch assemblies allow you to use an OEM-type assembly on your car. Most people would mount the female latch in the body and the male pin on the trunk or hood. Male pin can be removed from bracket and attached separately.

    The assemblies are cable operated but the cable is not included.
  • 1932 Ford Hood Latch, Chrome
    1932 Ford Hood Latch, Chrome
    (Part #91132502)
    x
                

    This is a reproduction ram's horn handle for 1932 Fords. The latch comes with the hood side catch and all necessary hardware as well.

    • Overall Height: 4"
    • Spring loaded
    • Chrome finish
    • Reproduction for 1932 Fords 
    • Includes hood side catch and hardware

     

  • Trunk or Hood Latch Assembly, Female Component
    Trunk or Hood Latch Assembly, Female Component
    (Part #91126110)
    x
                

    These trunk or hood latch assemblies allow you to use an OEM-type assembly on your car. Most people would mount the female latch in the body and the male pin on the trunk or hood. Male pin can be removed from bracket and attached separately.

    The assemblies are cable operated but the cable is not included.

  • Lokar CHT-1300U Combination Hood & Trunk Release Cable Kit, Black
    Lokar CHT-1300U Combination Hood & Trunk Release Cable Kit, Black
    (Part #491CHT1300U)
    x
                

    This trunk/hood cable kit has everything that you need for a stylish hood and trunk release for your ride. They are designed for factory cable-operated hood and trunk latches only.

    • 7 foot hood release cable length
    • 15 foot trunk cable length
    • Hood release includes firewall fittings and cable stop
    • Trunk release includes cable stop
    • Mounting hardware included
    • Sold as Kit
  • 1928-29 Ford Model A Fiberglass Hood for Stock Grille
    1928-29 Ford Model A Fiberglass Hood for Stock Grille
    (Part #9002813)
    x
                One piece, fiberglass "hot rod" style fiberglass hood for stock grille shell. This hood is an outer skin only and will require fabrication and additional mounting hardware. You may be required to obtain original components for your application.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Multicarb Torpedo Air Hood Scoops
    Multicarb Torpedo Air Hood Scoops
    (Part #9001380)
    x
                

    Multicarb Torpedo Air Universal Hood Scoops.

    • Base mounting hole is 5" Wide x 18" Long
    • Front inlet opening is 5-3/4" Wide x 3-1/2" Tall 
    • Overall dimensions are 26" Long x 7" Tall x 8-1/2" Wide
  • Lokar XCHT-1300U Midnight Series Combo Hood/Trunk Release Cable Kit
    Lokar XCHT-1300U Midnight Series Combo Hood/Trunk Release Cable Kit
    (Part #491XCHT1300U)
    x
                

    Billet aluminum handle assembly for both the hood and trunk. The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with aluminum fittings and stainless steel inner wire.

    • Hood release includes aluminum firewall fittings and cable stop.
    • Outer housing is 18 inches inside the vehicle and 6 feet under the hood.
    • Inner wire is 9 feet long.
    • Trunk release includes cable stop and the outer housing is 15 feet long and the inner wire is 16 feet long.
    • Requires cable-operated latches.
  • Vintage Hood Strap Buckle, Brass
    Vintage Hood Strap Buckle, Brass
    (Part #91102511)
    x
                
    • Combine with your own leather strap
    • Early race styling
    • Polished brass finish
  • Big Feather Radiator Wing, Chrome
    Big Feather Radiator Wing, Chrome
    (Part #91615812)
    x
                

    These big feather wings can be added to most Model T caps for radiators that have a moto meter and drilled cap. Measures 15-1/4" long x 3" wide.

    Moto meter, cap and filler neck sold separately.

  • Lokar HR-1100HT Hood Release Cable Kit, Stainless Housing
    Lokar HR-1100HT Hood Release Cable Kit, Stainless Housing
    (Part #49121100)
    x
                

    This kit comes complete with billet aluminum handle assembly and cables. The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Hood release kit includes aluminum firewall fittings and cable stop. The outer housing is 18 inches inside the vehicle and 6 feet under the hood. The inner wire is 9 feet long. Requires cable-operated latches.

    • Comes complete with billet aluminum handle assembly and cables
    • Specially extruded liner for extended life of the cable
    • Billet aluminum fittings and stainless steel inner wire
    • Includes aluminum firewall fittings and cable stop
    • Outer housing is 18 inches inside the vehicle and 6 feet under the hood
    • Inner wire is 9 feet long
    • Requires cable-operated latches
  • Snorkel Fiberglass Hood Scoop, 2-Piece
    Snorkel Fiberglass Hood Scoop, 2-Piece
    (Part #9001308)
    x
                

    "Snorkel" universal hood scoop made of heavy duty fiberglass. Designed for easy installation, our universal hood scoops feature a glossy gelcoat finish and are ready for paint preparations.

    Item specs when combined:

    • 19-3/4" wide (including the flange)
    • 16-1/2" wide (not counting the flange)
    • 28" deep (including the flange)
    • 24-1/4" deep (not counting the flange)
    • 8-3/4" tall when stacked

    Bottom piece:

    • 19-3/4" wide (including the flange)
    • 16-1/2" wide (not counting the flange)
    • 28" deep (including the flange)
    • 24-1/4" deep (not counting the flange)
    • 6" tall

    Top piece:

    • 2-5/8" tall
    • 13-1/8" wide
    • 23" deep

     

  • Replacement Hood Hairpin Clips
    Replacement Hood Hairpin Clips
    (Part #5501016A)
    x
                These are .154" or 5/32" diameter.  
            
  • GT-350 Shelby Style Hood Scoop
    GT-350 Shelby Style Hood Scoop
    (Part #9001350)
    x
                

    Reproduction of the Shelby Mustang GT350 hood scoop. This is a universal hood scoop made of heavy duty fiberglass for both street and race applications. Designed for easy installation, our universal hood scoops feature a glossy gelcoat finish and are ready for paint preparations.

    This is a universal hood scoop and will work for multiple applications, but will require some fitting and body work. Fiberglass and body filler would be required to make a perfect installation.

    *Not a direct replacement for stock Shelby scoop

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.

  • Race Car Style Latch, Polished Stainless Steel
    Race Car Style Latch, Polished Stainless Steel
    (Part #91102510)
    x
                

    This is a spring loaded 1 piece design latch. Simply pull locking tab to fasten over post and spring holds tight. There is a latch stud included with this latch. These are sold as each.

    • Early race car style
    • Polished Stainless Steel
    • Quick release 
    • Center of the hinge to the outside of the latch is 3-3/4"
    • Latch is 1" wide by .059" thick. by 4" over all length
    • Mounting plate is 2" wide at widest point and 2-7/16" long by .051" thick
    • Comes with Stud(clip) bolt 10-24(3/16") x 1" long
    • Washer is 1-1/4" o.d.
Goto Previous PagePrevious Page
1 2 3