Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors is the street rodder's source for air conditioning kits and heating accessories! Find all the essential A/C components, compressor brackets and fittings, as well as complete universal heaters and kits for street rods, in our online catalog.

Featured Products
Small Block Chevy Inboard Drive Kits, Alternator & AC
Small Block Chevy Inboard Drive Kits, Alternator & AC
x
            

We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

Inboard (high) mount brackets for early cars.

Alternator and A/C kits include dual groove pulleys.

Bracket kit works with dual quad & 3-2 low rise intakes.

Note: S/B Chevy, short style water pump only.

508 Chrome AC Compressor
$269.99
508 Chrome AC Compressor
x
            The Sanden type 508 compressor provides ample capacity for even large interiors and will enhance the appearance of your engine compartment.
        
A/C Hose Kit
$89.99
Product Rating: 5.00 Stars
A/C Hose Kit
x
            

These air conditioning hose kits include enough hose and fittings to allow a normal installation in applications without bulkhead fittings. 

  • (2) Band Clamps
  • (4) AN6 Straight
  • (1) AN8 Straight
  • (1) AN10 Straight
  • (2) AN6 90 Degree
  • (1) AN8 90 Degree
  • (1) AN10 90 Degree
  • (1) AN8 90 Degree with Service Port
  • (1) AN10 90 Degree with Service Port
  • (4) #6 O-Rings
  • (2) #8 O-Rings
  • (2) #10 O-Rings
  • (2) Grommets
  • 6 ft #6 Hose
  • 5 ft #8 Hose
  • 4 ft #10 Hose

 

Fittings will need to be crimped at your local shop.

Vintage Air 03332 SuperFlow Vertical Condenser
New
Vintage Air 03332 SuperFlow Vertical Condenser
x
            

The cool people at Vintage Air technology have done it again! Defining their commitment to creating superior products, Vintage Air offers these SuperFlow condensers. These condensers have a unique micro tube design with improved refrigerant flow to provide much more capacity than any other comparable tube and fin condenser. By providing increased refrigerant contact with the micro tube walls and multiple passes per circuit, SuperFlow condensers furnish more sufficient flow for a more efficient system and much cooler air. Vintage Air SuperFlow condensers are available in vertical models for those tight spots in your classic street rod, and most include universal mount bracket kits. Oh, and by the way, increased condenser capacity means that more heat is dissipated, pressure drops, and your compressor turns more easily. "So what," you say? Well, if your engine isn't working as hard, you gain a boost of horsepower! Cool, huh? Vintage Air--the people who know all about living cool.

  • Micro tube design with improved refrigerant flow
  • More sufficient flow for a more efficient system and much cooler air
  • Vertical model - for those tight spots in your classic street rod
  • Includes mounting brackets
  • Designed for street Rods (1932-'40 and most pre-'48 cars)
  • 20.75" tall x 14" wide x .75" thick
  • #8 fitting at top / #6 fitting at bottom

"Street Rod, HVAC" Page 1 of 3

  • 90 Degree Crimp-On O-Ring Heater Hose Fitting, -10 AN
    90 Degree Crimp-On O-Ring Heater Hose Fitting, -10 AN
    x
                

    These premium -10 size (7/8" x 14 TPI) crimp-on hose fittings feature O-ring seals and a 90 degree bend. Ideal for use with heater bulkhead plates.

    Note: Will need to be crimped by your local shop. 

  • Holley 20-132 LS Accessory Drive Bracket-ALT, P/S, A/C
    Holley 20-132 LS Accessory Drive Bracket-ALT, P/S, A/C
    x
                Please view the product's page for more information
            
  • Air Conditioning Kit w/ Condenser
    Air Conditioning Kit w/ Condenser
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pick-ups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, Sanden 508 compressor  with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    Instructions (PDF) 

  • 90 Degree Nickel Plated AC Fitting, -6 AN
    90 Degree Nickel Plated AC Fitting, -6 AN
    x
                These handsome nickle plated steel fittings are reuseable.
            
  • Aeroquip FCF0603 Stainless Steel Braided AC Hose, -6 AN, 3 Ft. Length
    Aeroquip FCF0603 Stainless Steel Braided AC Hose, -6 AN, 3 Ft. Length
    x
                

    This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.

    .33" I.D. - 3 Ft. length

  • Straight Nickel Plated AC Fitting, O-Ring Pilot, -10 AN
    Straight Nickel Plated AC Fitting, O-Ring Pilot, -10 AN
    x
                These handsome nickle plated steel fittings are reuseable.
            
  • A/C Hose Kit
    $89.99
    Product Rating: 5.00 Stars
    A/C Hose Kit
    x
                

    These air conditioning hose kits include enough hose and fittings to allow a normal installation in applications without bulkhead fittings. 

    • (2) Band Clamps
    • (4) AN6 Straight
    • (1) AN8 Straight
    • (1) AN10 Straight
    • (2) AN6 90 Degree
    • (1) AN8 90 Degree
    • (1) AN10 90 Degree
    • (1) AN8 90 Degree with Service Port
    • (1) AN10 90 Degree with Service Port
    • (4) #6 O-Rings
    • (2) #8 O-Rings
    • (2) #10 O-Rings
    • (2) Grommets
    • 6 ft #6 Hose
    • 5 ft #8 Hose
    • 4 ft #10 Hose

     

    Fittings will need to be crimped at your local shop.

  • Speedway Universal Fit Street Rod Heater, 12 Volt, 20,000 BTU
    Speedway Universal Fit Street Rod Heater, 12 Volt, 20,000 BTU
    x
                

    These all new universal street rod heaters give you the option of heat in your custom ride with the ease of installation.  They feature a compact size, two-speed fan, and rear fan guard.

    • 9-1/2" x 6-1/2" x 7"
    • Adjustable louver to direct heat flow
    • 12V 20,000 BTU heater
    • Has rear exit hose connections for convenient mounting
  • Small Block Chevy Inboard Drive Kits, Alternator & AC
    Small Block Chevy Inboard Drive Kits, Alternator & AC
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Inboard (high) mount brackets for early cars.

    Alternator and A/C kits include dual groove pulleys.

    Bracket kit works with dual quad & 3-2 low rise intakes.

    Note: S/B Chevy, short style water pump only.

  • Small Block Chevy Inboard A/C Brackets
    Small Block Chevy Inboard A/C Brackets
    x
                We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our polished billet aluminum brackets to make this a simple installation. 

    Inboard (high) mount brackets for early cars.



    Note: S/B Chevy, short style water pump only.
  • Dynatech   794-03006 Musclemaxx S/B Chevy A/C Mounting Bracket
    Dynatech 794-03006 Musclemaxx S/B Chevy A/C Mounting Bracket
    x
                Dynatech® has introduced a convenient and  clutter-free way to mount the OEM air conditioning compressor on your  small block Chevy. Kit includes bracket and two mounting bolts.
            
  • Aeroquip FCF0803 Stainless Steel Braided AC Hose, -8 AN, 3 Ft. Length
    Aeroquip FCF0803 Stainless Steel Braided AC Hose, -8 AN, 3 Ft. Length
    x
                This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.
            
  • A/C Drier with Safety Switch
    $54.99
    A/C Drier with Safety Switch
    x
                

    If you need to replace your drier, we have you covered. Includes mounting bracket and the binary switch is supplied, but it is not installed. Measures 2-3/8” x 6-1/2”.

    Note: Always mount in a cool place. Inside the car is acceptable. Mount in the vertical position with the connections on top. When properly charged, the sight glass in a 134a system will still show milky. It is recommended to replace the drier anytime a connection in the system has been opened. 

  • Long Chrome Heater Hose Fitting, 3/4 Inch Hose
    Long Chrome Heater Hose Fitting, 3/4 Inch Hose
    x
                

    Boy these fittings are hard to find! Long style for 3/4" hose. 1/2" NPT thread. Can be used for intake and water pump.

  • AC O-Rings - Replacement AN6 AC O-Rings - Set of 6
    AC O-Rings - Replacement AN6 AC O-Rings - Set of 6
    x
                Replacement o-rings in an assortment of AN sizes for your air conditioning system.   
            
  • Air Conditioning Condenser, 14 x 18 Inch
    Air Conditioning Condenser, 14 x 18 Inch
    x
                

    Horizontal mount aluminum A/C condenser with parallel flow. Core measures 14" tall and 18" wide. Overall width with brackets is 20".

    Has one 3/4"-16 UNF fitting and one 16mm X 1.5 fitting.



  • Diamond AC Bulkhead Plates with Fittings
    Diamond AC Bulkhead Plates with Fittings
    x
                

    When you have to run air conditioning and heater hoses through your firewall, the only way to make it look good is to use bulkhead plates. We make it easy for you to order because we include the four heater hose fittings and two a/c hose fittings required to finish the job.

    Kit includes:

    • (1) straight fitting for -6 AC hose
    • (1) 90° fitting for -6 AC hose
    • (1) straight fitting for -10 AC hose
    • (1) 90° fitting for -10 AC hose
    • (2) straight fittings for 5/8" heater hose
    • (2) 90° fittings for 5/8" heater hose
    • (1) bulkhead plate, 2-1/2" x 4-1/2"

    You will need to have the fittings crimped on the hoses by your local shop.

  • Slim Line Heat/Air Unit
    $359.99
    Slim Line Heat/Air Unit
    x
                This low profile under the dash mount heat/cool unit is 26.25" wide 5.25" tall and 12" deep. Features a three speed blower, heat/cool adjustment, defroster duct hook-ups, and three 1" x 5" front adjusting vents. Easy to install with mounting slots on the sides of the unit all plumbing and wiring done from the back side of the unit. Will handle 18,000 BTU's based on a Sanden or Sankyo 508 compressor at 60 MPH. The blower motor is capable of 240 CFM. Minimum condenser dimensions would be 12"X18" but would prefer a 14"X20" sized condenser, or 280 sq. in.
            
  • 508 Chrome AC Compressor
    $269.99
    508 Chrome AC Compressor
    x
                The Sanden type 508 compressor provides ample capacity for even large interiors and will enhance the appearance of your engine compartment.
            
  • 90 Degree Nickel Plated AC Fitting, O-Ring Pilot, -10 AN
    90 Degree Nickel Plated AC Fitting, O-Ring Pilot, -10 AN
    x
                These handsome nickle plated steel fittings are reuseable.
            
  • Straight Nickel Plated AC Fitting, O-Ring Pilot, -8 AN
    Straight Nickel Plated AC Fitting, O-Ring Pilot, -8 AN
    x
                These handsome nickle plated steel fittings are reuseable.
            
  • Aeroquip FCF0809 Stainless Steel Braided AC Hose, -8 AN, 9 Ft. Length
    Aeroquip FCF0809 Stainless Steel Braided AC Hose, -8 AN, 9 Ft. Length
    x
                This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.
            
  • Under Dash AC Unit
    $229.99
    $279.99
    Under Dash AC Unit
    x
                

    Looking for a simple under-the-dash A/C cooling unit? This compact air conditioning control box is just 16" long 4.25" tall and 11" deep. This unit features two large 2" X 6" air vents in front with a three-speed blower motor and cooling control adjustment.

    Note:  This unit consists of the AC evaporator, duct assembly and blower motor for the under dash use.  It will require the additional items of the compressor, hose kit, dryer and condenser to complete the A/C system.

  • Aeroquip FCF1003 Stainless Steel Braided AC Hose, -10 AN, 3 Ft. Length
    Aeroquip FCF1003 Stainless Steel Braided AC Hose, -10 AN, 3 Ft. Length
    x
                This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.
            
  • Straight Nickel Plated AC Fitting w/Port, -6 AN to -6 AN
    Straight Nickel Plated AC Fitting w/Port, -6 AN to -6 AN
    x
                These handsome nickel plated steel fittings are reuseable. This AN6 straight fitting features a high side R134a port.
            
  • Flex-A-Lite 650 Standard Plenum for Mojave Universal Heater
    Flex-A-Lite 650 Standard Plenum for Mojave Universal Heater
    x
                

    This plenum is made of black molded plastic and snaps onto the outlet 'grille' of the mojave heater. It has a nipple to attach one, 2.5" flex hose (like dryer vent hose - not included) to the side of the plenum.

    The plenum also has two round vents that can be rotated and which have two vanes that can be positioned to direct the airflow almost any direction or even closed to force air into the defrost hose.

    • 4-3/4" tall
    • 8-1/2" wide
    • 4-1/2" deep

    When installed on the heater, the overall dimensions of the assembly (heater with plenum) are:

    • 5" tall
    • 10" wide
    • 13" deep

    When the plenum is snapped onto the heater, the total depth (front to back) is approximately 13".

     

  • 135 Degree Nickel Plated AC Fitting, O-Ring Pilot w/Port, -10 AN
    135 Degree Nickel Plated AC Fitting, O-Ring Pilot w/Port, -10 AN
    x
                These handsome nickel plated steel fittings are reuseable. This 135 degree AN10 fitting features a low side R134a port.
            
  • Aeroquip FCF1009 Stainless Steel Braided AC Hose, -10 AN, 9 Ft. Length
    Aeroquip FCF1009 Stainless Steel Braided AC Hose, -10 AN, 9 Ft. Length
    x
                This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.
            
  • 90 Degree Nickel Plated AC Fitting, O-Ring Pilot w/ Port, -10 AN
    90 Degree Nickel Plated AC Fitting, O-Ring Pilot w/ Port, -10 AN
    x
                These handsome nickel plated steel fittings are reuseable. This 90 degree AN10 fitting features a low side R134a port.
            
  • Air Conditioning Kit w/o Condenser
    Air Conditioning Kit w/o Condenser
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pickups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, compressor with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    428-100 Instructions (PDF)

  • Straight Nickel Plated AC Fitting w/Port, -8 AN to -8 AN
    Straight Nickel Plated AC Fitting w/Port, -8 AN to -8 AN
    x
                These handsome nickle plated steel fittings are reuseable.
            
  • AC O Rings - Replacement AN8 AC O-Rings - Set of 6
    AC O Rings - Replacement AN8 AC O-Rings - Set of 6
    x
                Replacement o-rings in an assortment of AN sizes for your air conditioning system. 
            
Goto Previous PagePrevious Page
1 2 3