Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Body, Interior & Gauges At Speedway Motors

Speedway Motors is the street rodder's source for body parts, gauges, and interior accessories! Find all the essential fiberglass body components, gauge sets by Stewart Warner and Auto Meter, and hot rod bomber seats, in our online catalog. While you are there, check out our full line of script emblems, rear view mirrors, windshields, fiberglass hoods and grilles. Complete your hot rod with sound proof insulation from Dynalite and Hushmat. Don't forget about Speedway's hot rod bomber seats for your traditional street rod, too!

"Street Rod, Grille" Page 1 of 2

  • 1932 Ford Stainless Steel Grille/Hood Trim
    1932 Ford Stainless Steel Grille/Hood Trim
    x
                

    This 1932 Ford stainless grille trim is made of polished stainless steel. It is the trim molding piece that goes between the grille and hood. This is the grille trim for a stock 32 ford grille shell. No other dimensions are available.

    • 1932 Ford
    • Polished stainless steel
    • Fits between grille and hood

     

  • 1932 Ford Grille Insert, Rodders Style
    1932 Ford Grille Insert, Rodders Style
    x
                

    This 1932 Ford grille insert is made from beautifully polished stainless steel. "Rodder style" inserts do not have a crank hole.  This measures approx. 27-3/8" tall and 17" wide.  The grille is retained in the shell with screws going horizontal into the shell through the shell flange.

    • Polished stainless steel
    • Rodder style
    • Does not feature crank hole
    • 27-3/8" tall
    • 17" wide
  • Steel 1932 Ford Rodder Grille Shell
    $249.99
    $299.99
    Steel 1932 Ford Rodder Grille Shell
    x
                
    • Smooth Hot Rod style
    • Smooth shell has filled radiator cap opening and no crank hole
    • Use with our 911-32162 rodder insert
  • 1928-29 Ford Model A Radiator Stone Guard
    1928-29 Ford Model A Radiator Stone Guard
    x
                

    This stone guard for radiators is made of fully polished stainless steel.  Stone guard comes with attachment hardware and rubber cushions.  The guard has tabs for the 4 cushions to isolate it from the grille shell.

  • 1928-29 Ford Model A Stock Radiator Grille Shell, Chrome
    1928-29 Ford Model A Stock Radiator Grille Shell, Chrome
    x
                

    Authentic reproduction stamped steel grille shell for 1928-1929 Ford Model A. Has center hood hinge rod bracket installed. Shell is pre-drilled for hood lacing and slotted for attachment to the radiator brackets.

    • Overall height from bottom to top of flange at radiator neck opening is 28”
    • Overall width of radiator opening at widest point is 18-5/8”
    • Overall height of radiator opening at center below eyebrow is also 18-5/8”
    • Width at widest point across front at outside edges is 21-1/4”
    • Widest point at rear not including inset for hood is 22-11/16”
    • Widest point at rear at hood inset is 22-7/16”
    • One 3/4” hole on each side 10-7/8” up from the bottom of side for headlight wiring.
    • One 3/4” hole 4-1/8” up on drivers side for horn wiring
    • Shell is 4" deep

    Unit measures 29" tall and 4" deep.

  • 1932 Ford Grille Insert, Chopped
    1932 Ford Grille Insert, Chopped
    x
                This fully polished stainless steel 1932 Ford Lo-Boy grille insert is chopped 4-1/2" and has no crank hole. 23" tall and 17.5" at the widest point.  Please note that this insert is provided to be applicable and used in conjunction with the chopped grill shell # 974-51532 only.   Fitment is not guaranteed for any other grill shell application or brand other than # 974-51532
  • Extra Deep T Grille Shell
    $99.99
    Product Rating: 4.60 Stars
    Extra Deep T Grille Shell
    x
                

    Our rugged 5" deep fiberglass 'T' Grille Shell will cover all radiators and features a molded-on lower extension. (Not a stock replacement grille shell.) Fits Walker radiators and others.

    Made by skilled craftsmen in the USA!

     

  • 1940 Ford Deluxe Grille
    $399.99
    Product Rating: 5.00 Stars
    1940 Ford Deluxe Grille
    x
                An exact reproduction, pressure die cast like original. 3-piece set: center piece, left and right sides. Plated in beautiful chrome with crank hole.
            
  • 1928-29 Ford Model A Filled Radiator Grille Shell
    1928-29 Ford Model A Filled Radiator Grille Shell
    x
                Beautiful grille shell for 1928-1929 radiators. Exact duplicates of original, except crank hole and top radiator fill hole has been filled. 29"  tall. Stamped steel.  Available in unplated.
            
  • Sprint Style Track T Fiberglass Nose
    Sprint Style Track T Fiberglass Nose
    x
                

    Nose piece measures 24" high, 23-1/2" wide and 23-1/2" deep. Fiberglass construction. Use with Sprint Style cast aluminum grille.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1932 Ford Chopped Grille Shells
    1932 Ford Chopped Grille Shells
    x
                

    This 1932 Lo-Boy grille shell features a full hood mounting lip and has the filler cap/trim piece area smoothed over. Fiberglass construction. 4-1/2" chopped from stock height.

    • Height for radiator to fit through is 27-1/2"
    • Wide for radiator is 18-3/4"
    • Overall width = 8"
    • Depth of the grill from front = 1-3/4"
    • Depth of the grill from rear = 3-5/8" 

    This product is made to order-quantities may vary. Please allow three to four weeks lead time. 

  • 1941 Ford Grille Insert
    $159.99
    1941 Ford Grille Insert
    x
                Smooth fiberglass gives "filled" Hot Rod Style look or custom design your own opening. Bolts in with no modifications.  White gel-coated finish, ready for primer coat and paint.  Ships oversize UPS.
            
  • 1936 Ford Chrome Radiator Trim Bezel
    1936 Ford Chrome Radiator Trim Bezel
    x
                These radiator bezels are faithful reproductions of the chrome trim  piece for the top center of an original style 1936 Ford car grille  shell. They are designed to correspond with our 1936 Ford radiator emblems. 
    • Faithful reproduction
    • Trim piece for the top center of OEM style 1936 grille shell
    • Chrome plated finish
    • Designed to work with our radiator emblems (91132111).
  • 1939-40 Ford Grille
    $614.99
    1939-40 Ford Grille
    x
                

    Hot rod style grille with or without crank hole. Plain steel. Fits 1939 Deluxe and 1940 Standard.

    24-1/2" across the top
    20-1/4" across the bottom
    21" top to bottom
     

  • Sprint Style Track T Cast Aluminum Grille
    Sprint Style Track T Cast Aluminum Grille
    x
                

    Cast aluminum grille is an un-finished casting that has had the slag removed, but it will need to be polished, plated or painted.

    • 15-1/2" wide at widest point
    • 17-1/4" high w/o point at top
    • 19" overall height
    • 2-1/2" from back to front of shell at thickest point
  • 1933-34 Ford Pickup Fiberglass Grille Shell
    1933-34 Ford Pickup Fiberglass Grille Shell
    x
                

    This fiberglass grille shell accepts 1932 Ford passenger grille inserts (available separately). Features a glossy gelcoat finish that is ready for paint preparations.

    • Height of Grille Opening:  27.25"
    • Grille Opening Width @ Top:  16.5"
    • Grille Opening Width @ Bottom:  17.25

    Ships UPS oversize.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.  

  • 1937 Ford Car Grille w/ Crank Hole
    1937 Ford Car Grille w/ Crank Hole
    x
                

    This superb quality reproduction grille fits 1937 Ford passenger cars only. Includes crank hole, just like the original. Plain steel finish.

    • 11" wide at bottom
    • 22-3/8" wide at top
    • While laying on floor on four corners, the upper front center point is 11-3/8" from the floor
    • From a line between the upper rear corners to the front upper center point is 12-5/8"
    • Crank hole is down 23" from top center to 25-1/4"
    • Center front molding included has crank hole that measures 1-3/4" tall by 7/8" wide (not chrome)
  • Steel Reproduction 1932 Ford Original Design Grille Shell
    Steel Reproduction 1932 Ford Original Design Grille Shell
    x
                
    • Original style steel reproduction has radiator cap opening and crank hole
    • Use with our 911-32161 original style reproduction grille insert
  • 1932 Ford Chrome Radiator Cap/Emblem Bezel
    1932 Ford Chrome Radiator Cap/Emblem Bezel
    x
                

    These radiator bezels are faithful reproductions of the chrome trim piece for the top center of an original style 1932 Ford grille shell.  They are designed to fit around the radiator cap/ornament and extend down the front of the grille shell to hold the blue oval Ford script emblem.

    • Chrome finish
    • Original reproductions
    • Fits 1932 Ford grille shell


  • Track T Rodder Fiberglass Nose
    $129.99
    Product Rating: 5.00 Stars
    Track T Rodder Fiberglass Nose
    x
                

    Fiberglass Track Rodder nose for Track-T or T-bucket. Smooth white gelcoat finish. Opening for the grille is not pre-cut to facilitate various applications.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

     

  • 1928-29 Ford Model A Stock Radiator Grille Shell, Plain Steel
    1928-29 Ford Model A Stock Radiator Grille Shell, Plain Steel
    x
                

    Authentic reproduction stamped steel grille shell for 1928-1929 Ford Model A. Has center hood hinge rod bracket installed. Shell is pre-drilled for hood lacing and slotted for attachment to the radiator brackets.

    • Overall height from bottom to top of flange at radiator neck opening is 28”
    • Overall width of radiator opening at widest point is 18-5/8”
    • Overall height of radiator opening at center below eyebrow is also 18-5/8”
    • Width at widest point across front at outside edges is 21-1/4”
    • Widest point at rear not including inset for hood is 22-11/16”
    • Widest point at rear at hood inset is 22-7/16”
    • One 3/4” hole on each side 10-7/8” up from bottom of side for headlight wiring.
    • One 3/4” hole 4-1/8” up on drivers side for horn wiring
    • Shell is 4" deep

    Unit measures 29" tall and 4" deep.

  • 1934 Master Grille
    $199.99
    1934 Master Grille
    x
                

    With lower splash apron built in. Accepts all stock grillework, fits stock or aftermarket radiators. Fiberglass construction. Ships oversize UPS.

    Max outside width top = 20"
    Max outside width bottom = 18-5/8"
    Width of radiator opening top = 18"
    Width of radiator opening bottom = 15-1/8"
    Height of raditor opening = 27"

    Overall height of recess for decorative grill = 32-1/2" 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

    Chevrolet Spotters Guide (Link)

  • 1937 Ford Grille without Crank Hole, Passenger Car
    1937 Ford Grille without Crank Hole, Passenger Car
    x
                

    These superb quality grilles fit 1937 Ford passenger cars only. They are reproduced with the original crank hole filled in for a smooth look and come in a plain steel finish.

    • 1937 Ford passenger cars only
    • No crank hole for a smooth look
    • Plain steel finish
    • 11" wide at bottom
    • 22-1/2" wide at top
    • While laying on floor on four corners, the upper front center point is 11-3/8" from the floor
    • From a line between the upper rear corners to the front upper center point is 12-5/8"
    • Center front molding included (not chrome)
  • 1930-31 Ford Model A Radiator Stone Guards
    1930-31 Ford Model A Radiator Stone Guards
    x
                  This radiator stone guard is made of fully polished stainless steel. Available for 1930 or 1931 Ford Model A.                     
            
  • 1930-31 Grille Shell - Fiberglass
    1930-31 Grille Shell - Fiberglass
    x
                

    The 1930-31 fiberglass grille shell has a filled radiator hole. Same dimensions as original.  It even has the hood lip. 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1937 Ford Grille Insert
    $159.99
    1937 Ford Grille Insert
    x
                  Install this fiberglass insert "as is" for the smooth look, or design your own opening. Bolts right in. Ships as oversize UPS.   

  • 1932 Ford Grille Shells
    $189.99
    1932 Ford Grille Shells
    x
                

    This stock height 1932 Ford grille shell has a full hood mounting lip and has the filler cap/trim piece area smoothed over. Fiberglass construction.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Street Rodder Cast Aluminum Grille
    Street Rodder Cast Aluminum Grille
    x
                

    Fits Street Rodder fiberglass nose. This grille is an un-finished casting that has had the slag removed, but will need to be polished, plated or painted.

  • 1928-1929 Ford Model A Stainless Steel Crank Hole Cover
    1928-1929 Ford Model A Stainless Steel Crank Hole Cover
    x
                

    These crank hole covers rivet to your 1928-1929 radiator shell to protect from dirt and debris.

    • Includes a rivet.  
    • Stainless Steel
  • 1932 Ford Grille Insert, Original Style
    1932 Ford Grille Insert, Original Style
    x
                

    These 1932 Ford grille inserts feature a satin finish. This is an original style insert with a crank hole. This grille measures 27-3/8" tall, 17" wide and it bows out in the middle 2".  The grille is retained in the shell with screws going horizontal into the shell through the shell flange.

    • 27-3/8" tall
    • 17" wide
    • 2" middle arch
    • Fins are a satin finish 
    • Original style
    • With crank hole
  • 1934 Ford Chrome Radiator Trim Bezel
    1934 Ford Chrome Radiator Trim Bezel
    x
                

    These radiator bezels are faithful reproductions of the chrome trim piece for the top center of an original style 1934 Ford car grille shell. They are designed to correspond with our 1934 Ford radiator caps and emblems.

    • Faithful reproduction
    • Trim piece for the top center of OEM style 1934 grille shell
    • Chrome plated finish
    • Designed to work with our radiator caps (91132002) and emblems (91132109).


  • 1933 Mopar Grille Shell Model PD
    1933 Mopar Grille Shell Model PD
    x
                Dimensions:
    • Overall height as measured through the opening is 36 ¼”
    • Width at widest point at rear about midway down is 23 3/8”
    • Width at bottom is 18 1/8”
    • Front of bottom edge to rear edge of mounting tab is 11 13/16”
    • Depth front to rear above mounting tab is 3”
    • Front to rear at top is total of 8 ¼” at center (This includes the extended area at radiator cap of 2 1/8”)
    • Recess for radiator neck is 2 ½” I.D.
    • Front to back of side at upper corners is 6”
    • Front to back of side midway down is 5 7/8”
    • Grille opening is 17” at the widest point at the top
    • Halfway down grille opening is 15 7/8”
    • Further down in the opening it curves forward in a cowcatcher design and at that curve is 15 ¼”
  • Track T Rodder Cast Aluminum Grille
    Track T Rodder Cast Aluminum Grille
    x
                Track T Rodder grille for Track T Rodder fiberglass nose. This is an un-finished casting that has had the slag removed, but it will need to be polished, plated or painted.

    Measures 12" high, 7" wide and 19" deep. Rear opening height is 21" while the rear opening width is 18".
  • Curtis Style Track T Nose
    $99.99
    Product Rating: 4.00 Stars
    Curtis Style Track T Nose
    x
                

    Fits T or A Roadster and old racers. Sorry, no grille available.

    • Height: 20-1/2"
    • Width: 18-1/2"
    • Depth: 19"
    • Opening is egg-shaped: 12" height, 11" wide at widest piont
    Note: Ships UPS Oversize.

     

  • Street Rodder Fiberglass Nose
    $129.99
    Product Rating: 5.00 Stars
    Street Rodder Fiberglass Nose
    x
                

    The Street Rodder nose is constructed of fiberglass. Can be used with Speedway's Track T Kit. Measures 22" high, 19" wide, and 18" deep.

    Use with Street Rodder cast aluminum grille (sold seperately).

  • Garage Sale - 1940 Ford Deluxe Grille
    $329.99
    $399.99
    Garage Sale
    Garage Sale - 1940 Ford Deluxe Grille
    x
                

    An exact reproduction, pressure die cast like original. 3-piece set: center piece, left and right sides. Plated in beautiful chrome with crank hole.

     

    This grille is garage sale priced because it has some blemishes in the chrome and can't be sold as a first.  Most of the blems are between the cross bars. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - 1932 Ford Stainless Steel Grille/Hood Trim
    Garage Sale
    Garage Sale - 1932 Ford Stainless Steel Grille/Hood Trim
    x
                

    This 1932 Ford stainless grille trim is made of polished stainless steel. It is the trim molding piece that goes between the grille and hood. This is the grille trim for a stock 32 ford grille shell. No other dimensions are available.

    • 1932 Ford
    • Polished stainless steel
    • Fits between grille and hood 

     

    This is garage sale priced because it is bent.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - 1932 Stainless Steel Grill Insert
    Garage Sale
    Garage Sale - 1932 Stainless Steel Grill Insert
    x
                

    These 1932 Ford grille inserts feature a chrome finish. The grille is retained in the shell with screws going horizontal into the shell through the shell flange.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - 1932 Ford Grille Insert, Chopped
    Garage Sale
    Garage Sale - 1932 Ford Grille Insert, Chopped
    x
                

    This fully polished stainless steel 1932 Ford Lo-Boy grille insert is chopped 4-1/2" and has no crank hole. 23" tall and 17.5" at the widest point.  Please note that this insert is provided to be applicable and used in conjunction with the chopped grill shell # 974-51532 only.   Fitment is not guaranteed for any other grill shell application or brand other than # 974-51532

     

    This grille is garage sale priced because the bars are cut short on the bottom and do not reach the frame. What you see is what you get.

     

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - 1932 Ford Grille Insert, Chopped
    Garage Sale
    Garage Sale - 1932 Ford Grille Insert, Chopped
    x
                

    This grille insert is garage sale priced because it has a few small scratches and dents from being test fit.  Does not include hardware, what you see is what you get.

      

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

     

    This fully polished stainless steel 1932 Ford Lo-Boy grille insert is chopped 4-1/2" and has no crank hole. 23" tall and 17.5" at the widest point.  Please note that this insert is provided to be applicable and used in conjunction with the chopped grill shell # 974-51532 only.   Fitment is not guaranteed for any other grill shell application or brand other than # 974-51532

Goto Previous PagePrevious Page
1 2