Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

Street Rod

Shop Street Rod Garage Sale Parts At Speedway Motors

Want your hot rod to look cool at the show and hot on the street? Speedway Motors has you covered! Whether you’re building a low-buck rat rod roadster, Deuce coupe or fat-fendered sedan, Speedway has thousands of street rod parts, chassis, frames, aluminum radiators, crate engines, accessories, and a variety of professionally engineered street rod kits in stock, ready to ship. Best of all, Speedway's friendly and knowledgeable Techs can help you get the performance hot rod parts you need to get your GM, Chevy, Mopar or Ford car on the road and looking its best.

Filter

"Street Rod, Garage Sale" Page 1 of 50

Page 1 of 50

  • Garage Sale - 1940-53 Chevy Truck LED Tail Light, Right Side
    Garage Sale
    Garage Sale - 1940-53 Chevy Truck LED Tail Light, Right Side
    (Part #UP50945)
    x
                

    This tail light is garage sale priced because it has a few small dents in the side of the housing.

     No Warranty, No Returns On Garage Sale Items

    These 12 volt LED tail lights fit most 1940-1953 Chevrolet trucks that use two staggered bolts on the rear for mounting. A total of 45 super bright red LED's mount in a stainless steel housing.

    • Polycarbonate Lens
    • The left drivers side taillight has a license plate 6 LED light.
    • The right passenger side taillight does not have a license plate light.


    Note: A LED flasher is only required when all the lights on the vehicle are LED.

    1940-1953 Chevy Truck Tail Light Installation Instructions (pdf)

  • Garage Sale - Pro 10 Inch Coil Spring, 2-1/2 Inch I.D., 450 Rate
    Garage Sale
    Garage Sale - Pro 10 Inch Coil Spring, 2-1/2 Inch I.D., 450 Rate
    (Part #AUP3162)
    x
                

    Clearance!!

    No Warranty, No Returns On Garage Sale Items

     Standard coil springs from Pro Shocks. These are 2.5"ID and measure 10 inches in total height. 450LB Rate. Black Finish. 

  • Garage Sale - AFCO 1923 T-Bucket Aluminum Radiator, Chevy Engine, No Trans Cooler
    Garage Sale
    Garage Sale - AFCO 1923 T-Bucket Aluminum Radiator, Chevy Engine, No Trans Cooler
    (Part #AUP3428)
    x
                Please view the product's page for more information
            
  • Garage Sale - Dynatech Big Block Chevy 2.38 Inch Port Exhaust Gaskets
    Garage Sale
    Garage Sale - Dynatech Big Block Chevy 2.38 Inch Port Exhaust Gaskets
    (Part #AUP3559)
    x
                

     These gaskets are garage sale priced because they are new old stock. 

    No Warranty, No Returns On Garage Sale Items

    These Dynatech® header exhaust gaskets are manufactured at the highest quality for racing and high performance applications. They are CAD designed for the most precise fit possible.  Fits Big Block Chevy 396-454 V-8 engines. 

    Sold in pairs.

  • Garage Sale - Small Block Chevy Chassis Headers, Chrome
    Garage Sale
    Garage Sale - Small Block Chevy Chassis Headers, Chrome
    (Part #UP49064)
    x
                Please view the product's page for more information
            
  • Garage Sale - AFCO 81281Z 2005-2009 Mustang GT Aluminum Radiator, Polished
    Garage Sale
    Garage Sale - AFCO 81281Z 2005-2009 Mustang GT Aluminum Radiator, Polished
    (Part #AUP3437)
    x
                Please view the product's page for more information
            
  • Garage Sale - 1955-64 GM 8.2 Inch Axle Ring and Pinion Set, 5.13:1 Ratio
    Garage Sale
    Garage Sale - 1955-64 GM 8.2 Inch Axle Ring and Pinion Set, 5.13:1 Ratio
    (Part #919107I.GS2)
    x
                

    This item is garage sale priced because it has been discontinued.  The brown color on the ring and pinion appear to be a paint applied at the factory to check the gear pattern and not surface rust.

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS** 

     

    Fits 1955-64 GM 8.2" rear axle.  5.13:1 ratio.

  • Garage Sale - Windshield Wiper Arm
    $8.99
    $29.99
    Garage Sale
    Garage Sale - Windshield Wiper Arm
    (Part #UP50582)
    x
                

    This is Garage Sale priced because it is the arm only, no mounting hardware is included.

    These arms are an ideal complement to the electric conversion wiper kits. This arm is adjustable in length from a minumum of approximately 8" to a maximum of approximately 12". 

    These arms use blades available anywhere in many lengths. Sold each. Blades not included. Works with Speedway blades 91123506 or 91123305. 

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 1928-29 Ford Model A Stock Radiator Grille Shell, Chrome
    Garage Sale
    Garage Sale - 1928-29 Ford Model A Stock Radiator Grille Shell, Chrome
    (Part #UP49814)
    x
                Please view the product's page for more information
            
  • Garage Sale - 1937-48 Ford Steering Arms, 3-3/4 Inch Drop, Plain Finish
    Garage Sale
    Garage Sale - 1937-48 Ford Steering Arms, 3-3/4 Inch Drop, Plain Finish
    (Part #UP51065)
    x
                Please view the product's page for more information
            
  • 1955-57 Chevy Aluminum Accelerator Throttle Pedal Assembly
    Garage Sale
    1955-57 Chevy Aluminum Accelerator Throttle Pedal Assembly
    (Part #9118854)
    x
                

    Clearance!! 

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

    These gas pedals are designed for use with 1955-57 Tri-5 Chevys.  They feature a beautiful chrome finish with pedal dimensions of 2" x 5".

    • Aluminum throttle gas pedal
    • Pad with 6 non-slip rubber inserts
    • Firewall mount style
  • Garage Sale - Total Performance 46-3/4 Inch Plain Tie Rod, 1/2 Inch Thread
    Garage Sale
    Garage Sale - Total Performance 46-3/4 Inch Plain Tie Rod, 1/2 Inch Thread
    (Part #715F103469)
    x
                

    These rods are garage sale priced because they have are discontinued. 

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

    If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. Threaded for 1/2 inch heims.

  • Garage Sale - 1932 Ford Windshield Frame Lower Stanchion Kits, Stainless Steel
    Garage Sale
    Garage Sale - 1932 Ford Windshield Frame Lower Stanchion Kits, Stainless Steel
    (Part #UP48964)
    x
                

    These stanchions are garage sale priced because they have some scratches and pits in and under the polished finish. 

     No Warranty, No Returns On Garage Sale Items

    Lower stanchion kit for 1932 Ford Roadster/Phaeton windshields. Kit includes lower stanchions, rubber gaskets and hardware. Available in polished stainless steel finish.

    Wing nuts sold separately.

  • Garage Sale - Fast Shafts Chromoly Drive Shaft, 31 Inch
    Garage Sale
    Garage Sale - Fast Shafts Chromoly Drive Shaft, 31 Inch
    (Part #UP46756)
    x
                

    This driveshaft is garage sale priced because it has been installed and returned.  This one does have some scratches. 

      NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

    Fast Shafts are built using only the best 4130 Chromoly steel for lighter, yet very strong shafts. All Fast Shafts driveshafts are balanced using only the finest balancing equipment.

    • 2" OD x .083 wall
    • Driveshafts are balanced and include 1310 series U-joints
  • Garage Sale - Horn Button for Hub Adaptor 9105602
    Garage Sale
    Garage Sale - Horn Button for Hub Adaptor 9105602
    (Part #UP50461)
    x
                

    This adapter is garage sale priced because it has some scratches from being test fit. 

     No Warranty, No Returns On Garage Sale Items

    Complete the installation of your 9-bolt chrome plated billet steering wheel assembly with this chrome-plated aluminum horn button.

  • Garage Sale - 1932-1948 Flathead Steel Flywheel
    Garage Sale
    Garage Sale - 1932-1948 Flathead Steel Flywheel
    (Part #UP47707)
    x
                

    This flywheel is garage sale priced because it has been bolted in and returned. 

      NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

    It's getting harder to find usable Flathead flywheels and clutch components. We offer you these new steel flywheels for early 1932-1948 engines. Weighs 24 lbs.

    Will accept 10" and 10.5" Ford (Long-style) and 10.5" Borg & Beck Diaphram pressure plates.

    T-5 and Adapter Tech Tips (Link)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 50