Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Street Rod Chassis & Frame At Speedway Motors

Start your street rod project right here at Speeway Motors with a wide variety of hot rod chassis & frames. Everything you need is available, from frame assemblies and chassis notching tools to sound proof insulation by Dynamat and Hushmat. Make sure your street rod project starts on the right track with reproduction frame rails, crossmembers, and motor mounts right here at Speedway Motors!

"Street Rod, Frame" Page 1 of 5

  • 1928-31 Model A Front Crossmember
    1928-31 Model A Front Crossmember
    x
                

    These replacement 1928-31 Model 'A' Ford front crossmembers lower a Model A chassis 2" below a stock crossmember. Replaces a cracked original or use it to start your reproduction frame off right. Made of heavy, 7-gauge steel with clearance for 1-3/4" cross spring. Welds to frame boxing plates of original or repro chassis.

  • Universal Expanding Body Mounts
    Universal Expanding Body Mounts
    x
                

    If you are building a lightweight car like a "T" or an "A", mounting the body may present a problem. These neat expanding rubber universal body mounts allow you to drill a 3/4" hole in the top of the frame, insert a 3/8" coarse bolt, tighten, then the body is mounted.

    Not recommended for cars newer than 1934.

  • Rubber GM Transmission Cushion
    Rubber GM Transmission Cushion
    x
                

    OEM-style rubber transmission cushion for many '58-'82 GM transmissions including TH350 auto, Muncie, Saginaw, and others.

    • Meets or exceeds OEM specifications 
    • Rubber formulation provides abrasion resistance and aging stability
    • Tough, hardened steel plate & inserts
    • Chemlock® bonding agent ensures superior rubber-to-metal bond
  • Tubular Transmission Mount with 2 Inch Drop
    Tubular Transmission Mount with 2 Inch Drop
    x
                

    Universal rear transmission mounts and heavy duty tube crossmember. Fit most GM, Ford, and Mopar manual and auto transmissions. Black powder coated finish. Crossmember must be welded directly into frame or to 3 hole mounting flanges for bolt-in application. Fits frames up to 38" wide.

     

    Note: May require re-drilling of the mount holes when used with Ford C4/C6 trans cushion 910-18017.

  • 1932 Ford Rear Frame Horn Covers, Fiberglass Replacement
    1932 Ford Rear Frame Horn Covers, Fiberglass Replacement
    x
                

    These covers are produced here in our Speedway Fiberglass plant and average approximately 1/8” thick on the flatter surfaces and thicker in the corners on the inside.

    • Fiberglass
    • 1932 Ford
    • Cover rear frame horn
    • Specify LH(left) or RH(right) side
  • Speedway Universal 20 Circuit Wiring Harness
    Speedway Universal 20 Circuit Wiring Harness
    x
                Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

    Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

    • Harness has 20 circuits, of which 18 are fused
    • Taillight leads measure 17' long
    • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

    Wiring Harness Installation Instructions (PDF)

  • 1932 Ford Frame Front Boxing Plates
    1932 Ford Frame Front Boxing Plates
    x
                Our front boxing plate pairs are left long to allow for inconsistencies in original or new frame rails. Made of 10 gauge steel. Welding/fitting required. 
  • Small Block Ford Crossmember Motor Mount
    Small Block Ford Crossmember Motor Mount
    x
                Universal mount allows 260-289-302-351W S/B Fords and 1970-1974 Cleveland engines with front sump oil pan to be installed into most frames up to 38" wide. Cut for frame width, then bolt or weld in.   

    Note: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

  • Universal Body To Frame Cushion Kit
    Universal Body To Frame Cushion Kit
    x
                Our universal body-to-frame cushioning liner mounts between the body and frame of your hot rod, making it ride as good as it looks. Liner measures 1/8" thick and 2" wide and comes in a 25 ft. length. Has an adhesive tape backing to keep it in place when mounting your body.
            
  • 1928-1931 Ford Model A Steel Running Board Braces
    1928-1931 Ford Model A Steel Running Board Braces
    x
                

    These pressed steel running board braces are riveted or bolted to the frame to give support to the running boards. These stamped steel brackets are made to fit 1928-1931 Fords but will work for all years.  Choose front or back and left or right.

    When purchasing the rear, specify left or right side in the drop down.

    When purchasing front, left will work for both left and right sides. 

    • Pressed steel 
    • 1928-1931 Fords
    • 17-1/4" long front brackets
    • 15" long rear brackets
    • Choose front or back and left or right
  • 1930-31 Model A Fiberglass Firewall
    1930-31 Model A Fiberglass Firewall
    x
                

    This fiberglass firewall features a 3-3/4" deep recession which will allow you to fit late model engines in your '30-'31 Ford Model A.

    Ships UPS Oversize.

  • 1932 Ford Reproduction Frame Rails
    1932 Ford Reproduction Frame Rails
    x
                

    Speedway's 1932 Ford reproduction frame rails are the perfect foundation for your Deuce project. These one-piece, 11-gauge steel stampings are made to original specifications and show a fine attention to detail. Even the original bead is stamped into the rail.

    • All mounting holes on the top are drilled
    • On the sides, only the spreader bar holes are drilled
    • Fits every 1932 Ford model - rails are same for roadster, coupe, sedan, & pickup
    • Built exactly to the original '32 Ford specifications
      • Works perfectly with all original '32 parts
      • Also fits any parts that follow the original specifications

    916-57007 Instructions (PDF)

  • Aluminized Heat and Noise Insulation Shield, 2-Ply
    Aluminized Heat and Noise Insulation Shield, 2-Ply
    x
                

    Aluminized heat shield is constructed of two layers of 99.5% pure grade industrial aluminum, laminated to 3/8" fiber tech padding to achieve highest reflection of radiant heat and sound deadening. 

    • Insulates against heat, noise and cold 
    • Mold and mildew proof
    • Fire retardent
    • Reflects 97% of infrared energy
    • Fiberglass reinforced
    • Double-sided aluminum backing
    • 4' x 6' sheet
  • 1928-1929 Ford Model A Steel Running Boards
    1928-1929 Ford Model A Steel Running Boards
    x
                These 1928-1929 Model A runnings boards are complete with rubber mat and stainless trim.
            
  • 1932 Ford Front Crossmember
    $84.99
    Product Rating: 5.00 Stars
    1932 Ford Front Crossmember
    x
                This 1932 Ford front crossmember is made of 7 gauge steel with clearance for a 1-3/4" cross spring.  It welds to the frame boxing plate of an original or reproduction chassis.  Lowers a 1932 chassis 1" below a stock crossmember.  Measures 22-3/4" edge to edge.
            
  • Speedway Economy 12 Circuit Wiring Harness
    Speedway Economy 12 Circuit Wiring Harness
    x
                

    This harness was designed to offer you all the highest quality components in a package designed for cars with minimum accessories. Each wire is color coded and labeled every few inches.

    Our prewired 12 circuit kit will fit all your basic needs and makes wiring a painless process. It is designed especially for the street rod without accessories. It also includes horn relay and connector, turn and hazard signals, dimmer switch connector, circuit breaker for headlights, two flashers, one alternator plug, two ignition switch connectors, plus more.

    • Mainfuse box base is 1-7/8" x 3-11/16"
    • Box height is 3-3/4"
    12 Circuit Wiring Harness Installation Instructions (PDF)
  • 1932 Ford Straight Front Spreader Bar, Polished Stainless
    1932 Ford Straight Front Spreader Bar, Polished Stainless
    x
                

    This stainless steel spreader bar fits between the front frame rail horns on a 1932 Ford, lending strength and rigidity to the extreme ends of the frame. Straight 1-1/2" O.D. tubular polished stainless steel front cross bar measures 23-1/4" long.

  • Aluminized Heat and Sound Insulation Shield, 1-Ply, 4 x 6 Foot Sheets
    Aluminized Heat and Sound Insulation Shield, 1-Ply, 4 x 6 Foot Sheets
    x
                

    These aluminized heat shields are constructed of two layers of 99.5% pure grade industrial aluminum, laminated to 3/8" fiber tech padding to achieve highest reflection of radiant heat and sound deadening. Includes 4 feet by 6 feet of thermal and noise insulation.

    • Insulates against heat, noise and cold 
    • Mold and mildew proof
    • Fire retardent
    • Reflects 97% of infrared energy
    • Fiberglass reinforced
    • Single-sided aluminum backing
    • 4' x 6' sheet
  • 1932 Ford Straight Front Spreader Bar, Chrome
    1932 Ford Straight Front Spreader Bar, Chrome
    x
                

    This spreader bar fits between the front frame rail horns on a 1932 Ford, lending strength and rigidity to the extreme ends of the frame. Chrome plated straight 1-1/2" O.D. tubular steel front cross bar measures 23-1/4" long.                    

  • Weld-On U Bolt Plates
    $45.99
    Product Rating: 5.00 Stars
    Weld-On U Bolt Plates
    x
                

    This kit will clean up the appearance of your front crossmember. It has two plates that weld to the crossmember, and another plate that holds the spring from the underside, eliminating the need to have the U-bolts come up over the top of the crossmember.

  • 1932 Ford V-Style Front Spreader Bar, Polished Stainless
    1932 Ford V-Style Front Spreader Bar, Polished Stainless
    x
                

    This spreader bar fits between the front frame rail horns on a 1932 Ford, lending strength and rigidity to the extreme ends of the frame. V-style cross bars have two of the bolts hidden to clean up the looks. Polished stainless steel construction gives good looks and low maintenance. Simple bolt-in design. Measures 23" wide with a 1-3/4" outside diameter tube.

  • 1932 Ford Smooth Running Boards
    1932 Ford Smooth Running Boards
    x
                These would look great on your 32 Ford! Heavy gauge steel construction for durability. With support braces. Ready for paint. 16 gauge steel. 
            
  • Heidts Universal 56-1/2 Econo Crossmember
    Heidts Universal 56-1/2 Econo Crossmember
    x
                Please view the product's page for more information
            
  • Painless Wiring 10201 GM 18 Circuit Wiring Harness
    Painless Wiring 10201 GM 18 Circuit Wiring Harness
    x
                

    This 28 circuit kit includes most all the power accessory circuits you have been looking to add to your vehicle. The versatility of this harness will allow it to be easily adapted to almost any vehicle. This kit comes with the GM column mounted ignition switch connectors. Included with this harness are the following parts; a GM engineered fuse block & Painless mounting bracket; GM turn signal connectors; prewired plugs for the headlights & dimmer switch; and each wire is custom printed with the circuit identification as well as using GM color codes for easy installation

    GM Harness for use with late GM columns with column-mounted ignition switch.

    28 Circuit GM Column Wiring Instructions (PDF)

     

  • TH350 Transmission Cushion Mount-Polyurethane
    TH350 Transmission Cushion Mount-Polyurethane
    x
                

    Heavy duty Turbo 350 polyurethane replacement for original GM mounts. Features a built-in safety lock to prevent separation. For race or street race use.

    Fits "most" GM transmissions having a mount on the tailshaft. The bolt spacing for the tranny mount will accomodate 3-3/4" to 4-1/4" bolt pattern on the transmission. For TH350 application.

  • 1932 Ford Straight Rear Spreader Bar, Polished Stainless
    1932 Ford Straight Rear Spreader Bar, Polished Stainless
    x
                

    This spreader bar fits between the rear frame rail horns on a 1932 Ford, lending strength and rigidity to the extreme ends of the frame. Straight 2" O.D. tubular stainless steel rear cross bar measures 39-1/2" wide with 1/2" bolt holes (no bolts or spacers included).

    Note: Spacers are already on an original frame. If you have an aftermarket frame, you will need spacer kit  916-57028.

  • Thermo Tec 14002 Thermo-Shield Thermal Tape
    Thermo Tec 14002 Thermo-Shield Thermal Tape
    x
                

    Thermo-Shield protects hoses and wires from radiant heat. Thermo-Shield is used in applications where it is difficult or not practical to disconnect one end of the hose or wire. NOT FOR USE ON EXHAUST PIPE.

    The adhesive-backed composite construction tape can easily be wrapped around the hose or wire to make a clean, professional appearance and protect parts from over 90% of radiant heat up to 2000 degrees Fahrenheit.

    Comes in a 1-1/2" wide x 15' foot roll.

  • 1932 Ford Steel Replacement Firewall
    1932 Ford Steel Replacement Firewall
    x
                

    This 1932 Ford firewall is the perfect fix for a butchered original.  They are designed to replace OEM specs and are constructed of quality steel material.

    • 1932 Ford
    • OEM replacement
    • Quality steel construction
  • 1928-31 Ford Model A Transmission Mount for GM Transmission
    1928-31 Ford Model A Transmission Mount for GM Transmission
    x
                

    Our crossmember kit makes it easy to mount a GM transmission in your '28-'31 Model A frame. This is the same one that you have seen in our assembled "Model A" frames. Transmission mount plate is to be used with a two-bolt transmission mount cushion.

    • 30" wide
    • 2 x 3" Square tubing
    • 8-3/8" from top of tubing to top of plate (top of the crossmember to the trans mount surface)
    • Top of crossmember to mounting holes: 2-7/8"
  • Tubular Transmission Mount with 4 Inch Drop
    Tubular Transmission Mount with 4 Inch Drop
    x
                

    Universal rear transmission mounts and heavy duty tube crossmember. Fit most GM, Ford, and Mopar manual and auto transmissions. Black powder coated finish. Crossmember must be welded directly into frame or to 3 hole mounting flanges for bolt-in application. Fits frames up to 38" wide.

     

    Note: May require re-drilling of the mount holes when used with Ford C4/C6 trans cushion 910-18017.

  • Thermo Tec 13575 Adhesive-Backed Aluminized Heat Barrier, 12 x 24 Inch
    Thermo Tec 13575 Adhesive-Backed Aluminized Heat Barrier, 12 x 24 Inch
    x
                

    Protect parts and components from radiant heat. This special adhesive-backed material can be used to protect painted surfaces, plastic parts and more. This heat barrier is composed of woven silica with a flexible aluminized finish and a strong adhesive. The reflective surface of the material is capable of withstanding radiant temperatures of up to 2000ºF. Material can be easily applied to any surface or wrapped around hoses and wires for a clean professional appearance.

  • Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    x
                

    These Speedway Mustang IFS kits for 1949-1954 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1949-1954 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a

  • Painless Wiring 12 Circuit Wiring Harness
    Painless Wiring 12 Circuit Wiring Harness
    x
                

    Easy-to-install 12 Circuit Painless harness features these pre-wired circuits: Coil, emergency flashers, horn, headlights, power windows, wipers, stop lights, gauges, radio (constant hot), air conditioning, heat, electric fan and turn signals. All fuses, flashers and horn relay, pre-installed.

    Choose from the Universal Harness or the GM Harness (Chevy) for use with GM column-mounted ignition switch.

    12 Circuit Wiring Instructions (PDF)

  • 1928-31 Ford Model A Frame Rails
    1928-31 Ford Model A Frame Rails
    x
                
    • '28-'31 Ford rails
    • Laser cut from 11 gauge pickled and oiled steel plate
    • Welded on a rail fixture
    • Ground and sanded with 50 grit
  • DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
    DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
    x
                Reflect-A-GOLD is a metalized polyamide  polymer laminated glass cloth with a high temperature pressure sensitive  adhesive for use in extreme temperature swing environments. It is  lightweight and easy to apply and remove. 

    Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms – anything or area that needs protection from heat.

    • For firewalls, bulkheads, engine covers, floors, seat bottoms & more
    • Capable of handling continual temperatures up to 850°F
    • Resists UV degradation for long-term performance
    • Virtually NO clearance needed
    • Adhesive protected by a release liner rated up to 325°F
    • Light weight and flexible-Trim to size
    • Space age polymer material
    • Reflects up to 850°F! Reflecting 80% of heat!
    • Ultra light weight and self adhesive
  • 1932 Ford Frame Center Boxing Plates
    1932 Ford Frame Center Boxing Plates
    x
                Our center boxing plate  pairs are left long to allow for inconsistencies in  original or new frame rails. Made of 10 gauge steel. Welding/fitting  required.
            
  • 1933-1934 Ford Front Frame Boxing Plates
    1933-1934 Ford Front Frame Boxing Plates
    x
                

    When using original or reproduction frame rails, be sure to fully box the front section for strength and saftey. Our front boxing plates are designed to box the frame in critical front suspension attachment points and motor mount areas. 

    10 gauge

     

  • 1935-1940 Ford Front Frame Boxing Plates
    1935-1940 Ford Front Frame Boxing Plates
    x
                

    When using original or reproduction frame rails, be sure to fully box the front section for strength and saftey. Our front boxing plates are designed to box the frame in critical front suspension attachment points and motor mount areas.

    10 gauge.

  • 1941-48 Ford Crossmember
    $104.99
    Product Rating: 3.00 Stars
    1941-48 Ford Crossmember
    x
                Lowers 1941-48's by 3 inches, with no other changes. Direct bolt-in. All mounting holes match original frame.

    This is a spring mount crossmember for a 2" spring. It is 29-1/4" wide, end to end, or 27-5/8" wide, hole to hole.

    Warning: This crossmember does not work with a Ford Flathead Motor - there is no place for original motor mounts.

  • Traditional T Frame - Steering Box Options
    Traditional T Frame - Steering Box Options
    x
                Our traditional 1922-1925 T frame has an additonal 6" of kick-up in the rear and was designed to use our High-Arch leaf spring. Add our 6" drop radius rod front axle and you have a T in the weeds. We can also add front radius rod brackets and Vega box mount, but don't recommend our motor mount or rear suspension options on this frame.
            
Goto Previous PagePrevious Page
1 2 3 4 5